{"product_id":"apex-dynamics-pu-lubrication-pinions","title":"Apex Dynamics PU Lubrication Pinions (Felt Gears, Module 1-12)","description":"\u003cp class=\"ps-intro\"\u003eApex Dynamics PU lubrication pinions are open-cell polyurethane foam gears with standard involute teeth that run in mesh with a rack or pinion and distribute lubricant fed by the LUG lubricator evenly over all tooth flanks.\u003c\/p\u003e\u003ch4 class=\"ps-h\"\u003eKey features\u003c\/h4\u003e\u003cul class=\"ps-feat\"\u003e\n\u003cli\u003eOrder code PU-\u0026lt;module\u0026gt;-\u0026lt;teeth\u0026gt;\u0026lt;S\/L\/R\u0026gt;: S straight, L left-hand helical (meshes rack), R right-hand helical (meshes pinion)\u003c\/li\u003e\n\u003cli\u003eModules 1 to 12 plus circular-pitch sizes Pt 5, Pt 10 and Pt 13.33 (straight teeth)\u003c\/li\u003e\n\u003cli\u003eOpen-cell PU foam absorbs lubricant and lubricates without load or over-lubrication\u003c\/li\u003e\n\u003cli\u003eSoak in lubricant before first use; feed rate set by module and speed via the controller\u003c\/li\u003e\n\u003cli\u003eMounted on AUX tightening shafts (right-angle or in-line) that carry the lubricant to the pinion\u003c\/li\u003e\n\u003cli\u003eCentral distance to pinion a = (d + dF)\/2; to rack bottom A = h0 + dF\/2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4 class=\"ps-h\"\u003eSpecifications\u003c\/h4\u003e\u003ctable class=\"ps-kv\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eOpen-cell polyurethane foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTooth form\u003c\/th\u003e\n\u003ctd\u003eStandard involute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTeeth versions\u003c\/th\u003e\n\u003ctd\u003eStraight, left-hand helical, right-hand helical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBore d1\u003c\/th\u003e\n\u003ctd\u003e12 mm (m1-4), 20 mm (m5-10), 25 mm (m12)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeed rate guide\u003c\/th\u003e\n\u003ctd\u003eApprox. 0.1-2.5 cm3\/24 h by module and speed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eAUX tightening shaft for PU pinion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSource\u003c\/th\u003e\n\u003ctd\u003eAPEX Dynamics Smart Lubrication System catalog, p. 7-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ctable class=\"ps-src\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-01-36S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 1 | Teeth Z: 36 | Teeth: Straight | Tip dia. da: 38 mm | Bore d1 x width b: 12 x 15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-01-36L\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 1 | Teeth Z: 36 | Teeth: LH helical (for rack) | Tip dia. da: 40.2 mm | Bore d1 x width b: 12 x 15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-01-36R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 1 | Teeth Z: 36 | Teeth: RH helical (for pinion) | Tip dia. da: 40.2 mm | Bore d1 x width b: 12 x 15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-1J-24S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 1.5 | Teeth Z: 24 | Teeth: Straight | Tip dia. da: 39 mm | Bore d1 x width b: 12 x 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-1J-24L\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 1.5 | Teeth Z: 24 | Teeth: LH helical (for rack) | Tip dia. da: 41.2 mm | Bore d1 x width b: 12 x 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-1J-24R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 1.5 | Teeth Z: 24 | Teeth: RH helical (for pinion) | Tip dia. da: 41.2 mm | Bore d1 x width b: 12 x 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-02-17S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 2 | Teeth Z: 17 | Teeth: Straight | Tip dia. da: 38 mm | Bore d1 x width b: 12 x 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-02-17L\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 2 | Teeth Z: 17 | Teeth: LH helical (for rack) | Tip dia. da: 40.1 mm | Bore d1 x width b: 12 x 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-02-17R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 2 | Teeth Z: 17 | Teeth: RH helical (for pinion) | Tip dia. da: 40.1 mm | Bore d1 x width b: 12 x 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-2J-17S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 2.5 | Teeth Z: 17 | Teeth: Straight | Tip dia. da: 47.5 mm | Bore d1 x width b: 12 x 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-2J-17L\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 2.5 | Teeth Z: 17 | Teeth: LH helical (for rack) | Tip dia. da: 50.1 mm | Bore d1 x width b: 12 x 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-2J-17R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 2.5 | Teeth Z: 17 | Teeth: RH helical (for pinion) | Tip dia. da: 50.1 mm | Bore d1 x width b: 12 x 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-03-17S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 3 | Teeth Z: 17 | Teeth: Straight | Tip dia. da: 57 mm | Bore d1 x width b: 12 x 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-03-17L\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 3 | Teeth Z: 17 | Teeth: LH helical (for rack) | Tip dia. da: 60.1 mm | Bore d1 x width b: 12 x 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-03-17R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 3 | Teeth Z: 17 | Teeth: RH helical (for pinion) | Tip dia. da: 60.1 mm | Bore d1 x width b: 12 x 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-04-17S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 4 | Teeth Z: 17 | Teeth: Straight | Tip dia. da: 76 mm | Bore d1 x width b: 12 x 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-04-17L\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 4 | Teeth Z: 17 | Teeth: LH helical (for rack) | Tip dia. da: 80.2 mm | Bore d1 x width b: 12 x 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-04-17R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 4 | Teeth Z: 17 | Teeth: RH helical (for pinion) | Tip dia. da: 80.2 mm | Bore d1 x width b: 12 x 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-05-17S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 5 | Teeth Z: 17 | Teeth: Straight | Tip dia. da: 95 mm | Bore d1 x width b: 20 x 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-05-17L\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 5 | Teeth Z: 17 | Teeth: LH helical (for rack) | Tip dia. da: 100.2 mm | Bore d1 x width b: 20 x 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-05-17R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 5 | Teeth Z: 17 | Teeth: RH helical (for pinion) | Tip dia. da: 100.2 mm | Bore d1 x width b: 20 x 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-06-17S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 6 | Teeth Z: 17 | Teeth: Straight | Tip dia. da: 114 mm | Bore d1 x width b: 20 x 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-06-17L\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 6 | Teeth Z: 17 | Teeth: LH helical (for rack) | Tip dia. da: 120.2 mm | Bore d1 x width b: 20 x 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-06-17R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 6 | Teeth Z: 17 | Teeth: RH helical (for pinion) | Tip dia. da: 120.2 mm | Bore d1 x width b: 20 x 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-08-17S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 8 | Teeth Z: 17 | Teeth: Straight | Tip dia. da: 152 mm | Bore d1 x width b: 20 x 80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-08-17L\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 8 | Teeth Z: 17 | Teeth: LH helical (for rack) | Tip dia. da: 160.3 mm | Bore d1 x width b: 20 x 80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-08-17R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 8 | Teeth Z: 17 | Teeth: RH helical (for pinion) | Tip dia. da: 160.3 mm | Bore d1 x width b: 20 x 80 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-10-17S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 10 | Teeth Z: 17 | Teeth: Straight | Tip dia. da: 190 mm | Bore d1 x width b: 20 x 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-10-17L\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 10 | Teeth Z: 17 | Teeth: LH helical (for rack) | Tip dia. da: 200.4 mm | Bore d1 x width b: 20 x 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-10-17R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 10 | Teeth Z: 17 | Teeth: RH helical (for pinion) | Tip dia. da: 200.4 mm | Bore d1 x width b: 20 x 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-12-14S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 12 | Teeth Z: 14 | Teeth: Straight | Tip dia. da: 192 mm | Bore d1 x width b: 25 x 120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-12-14L\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 12 | Teeth Z: 14 | Teeth: LH helical (for rack) | Tip dia. da: 202.3 mm | Bore d1 x width b: 25 x 120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-12-14R\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 12 | Teeth Z: 14 | Teeth: RH helical (for pinion) | Tip dia. da: 202.3 mm | Bore d1 x width b: 25 x 120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-1K-24S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 1.591 (Pt 5) | Teeth Z: 24 | Teeth: Straight | Tip dia. da: 41.4 mm | Bore d1 x width b: 12 x 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-3B-17S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 3.183 (Pt 10) | Teeth Z: 17 | Teeth: Straight | Tip dia. da: 60.5 mm | Bore d1 x width b: 12 x 30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePU-4D-17S\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eModule: 4.244 (Pt 13.33) | Teeth Z: 17 | Teeth: Straight | Tip dia. da: 80.6 mm | Bore d1 x width b: 12 x 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Apex Dynamics","offers":[{"title":"Default Title","offer_id":67529593291042,"sku":"PU-01-36S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0744\/7586\/files\/apex-dynamics-pu-lubrication-pinions.jpg?v=1792050468","url":"https:\/\/prosourcemro.com\/products\/apex-dynamics-pu-lubrication-pinions","provider":"ProSource MRO","version":"1.0","type":"link"}