{"product_id":"thk-link-ball-bl-bl-a","title":"THK Link Ball BL \/ BL-A","description":"\u003cp class=\"ps-intro\"\u003eTHK BL \/ BL-A type Link Ball.\u003c\/p\u003e\u003ch4 class=\"ps-h\"\u003eKey features\u003c\/h4\u003e\u003cul class=\"ps-feat\"\u003e\n\u003cli\u003eHolder connected perpendicular to ball stud\u003c\/li\u003e\n\u003cli\u003eGrease pockets molded at top and bottom of spherical contact for high lubrication and wear resistance\u003c\/li\u003e\n\u003cli\u003eBL4DA\/BL5DA (BL-A type): A-1 alloy holder (lightweight)\u003c\/li\u003e\n\u003cli\u003eBL6D~BL16BD: high-strength zinc alloy holder\u003c\/li\u003e\n\u003cli\u003eD type: fine thread; BD type: coarse thread\u003c\/li\u003e\n\u003cli\u003eLeft-hand thread: L engraved on cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4 class=\"ps-h\"\u003eSpecifications\u003c\/h4\u003e\u003ctable class=\"ps-kv\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eStud Material\u003c\/th\u003e\n\u003ctd\u003eS35C (20~28HRC), chromate treatment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLubrication\u003c\/th\u003e\n\u003ctd\u003eLithium grease No.2 (boot + cap)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended Mating Hole\u003c\/th\u003e\n\u003ctd\u003eH10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeft-hand thread\u003c\/th\u003e\n\u003ctd\u003eL engraved on cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ctable class=\"ps-src\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBL4DA\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eTHK Link Ball BL4DA, d2=4mm, thread=M4×0.7, Da=7.938mm, Cs=4510N | Shaft Diameter (d2): 4 mm | Total Length (L): 24.5 mm | Holder Diameter (D): 13 mm | Thread: M4×0.7 (Fine) | Ball Diameter (Da): 7.938 mm | Allowable Tilt Angle (2θ): ±40° | Static Load Capacity (Cs): 4510 N | Yield Point Strength (Pk): 1370 N | Mass: 7 g | Holder Material: A-1 alloy (BL-A type) | Stud Material: S35C (20~28HRC), chromate treatment | Lubrication: Lithium grease No.2 (boot + cap) | Recommended Mating Hole: H10 | Left-hand thread: L engraved on cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBL5DA\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eTHK Link Ball BL5DA, d2=5mm, thread=M5×0.8, Da=9.525mm, Cs=6470N | Shaft Diameter (d2): 5 mm | Total Length (L): 34.5 mm | Holder Diameter (D): 15 mm | Thread: M5×0.8 (Fine) | Ball Diameter (Da): 9.525 mm | Allowable Tilt Angle (2θ): ±40° | Static Load Capacity (Cs): 6470 N | Yield Point Strength (Pk): 2250 N | Mass: 12 g | Holder Material: A-1 alloy (BL-A type) | Stud Material: S35C (20~28HRC), chromate treatment | Lubrication: Lithium grease No.2 (boot + cap) | Recommended Mating Hole: H10 | Left-hand thread: L engraved on cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBL6D\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eTHK Link Ball BL6D, d2=6mm, thread=M6×1, Da=11.112mm, Cs=9900N | Shaft Diameter (d2): 6 mm | Total Length (L): 38.0 mm | Holder Diameter (D): 16 mm | Thread: M6×1 (Fine) | Ball Diameter (Da): 11.112 mm | Allowable Tilt Angle (2θ): ±40° | Static Load Capacity (Cs): 9900 N | Yield Point Strength (Pk): 3920 N | Mass: 26 g | Holder Material: High-strength zinc alloy | Stud Material: S35C (20~28HRC), chromate treatment | Lubrication: Lithium grease No.2 (boot + cap) | Recommended Mating Hole: H10 | Left-hand thread: L engraved on cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBL8D\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eTHK Link Ball BL8D, d2=8mm, thread=M8×1.25, Da=12.7mm, Cs=12500N | Shaft Diameter (d2): 8 mm | Total Length (L): 45.5 mm | Holder Diameter (D): 19 mm | Thread: M8×1.25 (Fine) | Ball Diameter (Da): 12.7 mm | Allowable Tilt Angle (2θ): ±40° | Static Load Capacity (Cs): 12500 N | Yield Point Strength (Pk): 6570 N | Mass: 49 g | Holder Material: High-strength zinc alloy | Stud Material: S35C (20~28HRC), chromate treatment | Lubrication: Lithium grease No.2 (boot + cap) | Recommended Mating Hole: H10 | Left-hand thread: L engraved on cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBL10D\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eTHK Link Ball BL10D, d2=10mm, thread=M10×1.25, Da=15.875mm, Cs=18300N | Shaft Diameter (d2): 10 mm | Total Length (L): 55.5 mm | Holder Diameter (D): 25 mm | Thread: M10×1.25 (Fine) | Ball Diameter (Da): 15.875 mm | Allowable Tilt Angle (2θ): ±40° | Static Load Capacity (Cs): 18300 N | Yield Point Strength (Pk): 11300 N | Mass: 87 g | Holder Material: High-strength zinc alloy | Stud Material: S35C (20~28HRC), chromate treatment | Lubrication: Lithium grease No.2 (boot + cap) | Recommended Mating Hole: H10 | Left-hand thread: L engraved on cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBL10BD\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eTHK Link Ball BL10BD, d2=10mm, thread=M10×1.5, Da=15.875mm, Cs=18300N | Shaft Diameter (d2): 10 mm | Total Length (L): 55.5 mm | Holder Diameter (D): 25 mm | Thread: M10×1.5 (Coarse) | Ball Diameter (Da): 15.875 mm | Allowable Tilt Angle (2θ): ±40° | Static Load Capacity (Cs): 18300 N | Yield Point Strength (Pk): 11300 N | Mass: 90 g | Holder Material: High-strength zinc alloy | Stud Material: S35C (20~28HRC), chromate treatment | Lubrication: Lithium grease No.2 (boot + cap) | Recommended Mating Hole: H10 | Left-hand thread: L engraved on cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBL12D\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eTHK Link Ball BL12D, d2=12mm, thread=M12×1.25, Da=19.05mm, Cs=26700N | Shaft Diameter (d2): 12 mm | Total Length (L): 64.5 mm | Holder Diameter (D): 29 mm | Thread: M12×1.25 (Fine) | Ball Diameter (Da): 19.05 mm | Allowable Tilt Angle (2θ): ±40° | Static Load Capacity (Cs): 26700 N | Yield Point Strength (Pk): 16400 N | Mass: 143 g | Holder Material: High-strength zinc alloy | Stud Material: S35C (20~28HRC), chromate treatment | Lubrication: Lithium grease No.2 (boot + cap) | Recommended Mating Hole: H10 | Left-hand thread: L engraved on cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBL12BD\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eTHK Link Ball BL12BD, d2=12mm, thread=M12×1.75, Da=19.05mm, Cs=26700N | Shaft Diameter (d2): 12 mm | Total Length (L): 64.5 mm | Holder Diameter (D): 29 mm | Thread: M12×1.75 (Coarse) | Ball Diameter (Da): 19.05 mm | Allowable Tilt Angle (2θ): ±40° | Static Load Capacity (Cs): 26700 N | Yield Point Strength (Pk): 16400 N | Mass: 148 g | Holder Material: High-strength zinc alloy | Stud Material: S35C (20~28HRC), chromate treatment | Lubrication: Lithium grease No.2 (boot + cap) | Recommended Mating Hole: H10 | Left-hand thread: L engraved on cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBL14D\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eTHK Link Ball BL14D, d2=14mm, thread=M14×1.5, Da=22.225mm, Cs=36400N | Shaft Diameter (d2): 14 mm | Total Length (L): 74.0 mm | Holder Diameter (D): 34 mm | Thread: M14×1.5 (Fine) | Ball Diameter (Da): 22.225 mm | Allowable Tilt Angle (2θ): ±40° | Static Load Capacity (Cs): 36400 N | Yield Point Strength (Pk): 19800 N | Mass: 235 g | Holder Material: High-strength zinc alloy | Stud Material: S35C (20~28HRC), chromate treatment | Lubrication: Lithium grease No.2 (boot + cap) | Recommended Mating Hole: H10 | Left-hand thread: L engraved on cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBL14BD\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eTHK Link Ball BL14BD, d2=14mm, thread=M14×2, Da=22.225mm, Cs=36400N | Shaft Diameter (d2): 14 mm | Total Length (L): 74.0 mm | Holder Diameter (D): 34 mm | Thread: M14×2 (Coarse) | Ball Diameter (Da): 22.225 mm | Allowable Tilt Angle (2θ): ±40° | Static Load Capacity (Cs): 36400 N | Yield Point Strength (Pk): 19800 N | Mass: 245 g | Holder Material: High-strength zinc alloy | Stud Material: S35C (20~28HRC), chromate treatment | Lubrication: Lithium grease No.2 (boot + cap) | Recommended Mating Hole: H10 | Left-hand thread: L engraved on cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBL16D\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eTHK Link Ball BL16D, d2=16mm, thread=M16×1.5, Da=22.225mm, Cs=36400N | Shaft Diameter (d2): 16 mm | Total Length (L): 83.0 mm | Holder Diameter (D): 38 mm | Thread: M16×1.5 (Fine) | Ball Diameter (Da): 22.225 mm | Allowable Tilt Angle (2θ): ±30° | Static Load Capacity (Cs): 36400 N | Yield Point Strength (Pk): 26900 N | Mass: 315 g | Holder Material: High-strength zinc alloy | Stud Material: S35C (20~28HRC), chromate treatment | Lubrication: Lithium grease No.2 (boot + cap) | Recommended Mating Hole: H10 | Left-hand thread: L engraved on cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBL16BD\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eTHK Link Ball BL16BD, d2=16mm, thread=M16×2, Da=22.225mm, Cs=36400N | Shaft Diameter (d2): 16 mm | Total Length (L): 83.0 mm | Holder Diameter (D): 38 mm | Thread: M16×2 (Coarse) | Ball Diameter (Da): 22.225 mm | Allowable Tilt Angle (2θ): ±30° | Static Load Capacity (Cs): 36400 N | Yield Point Strength (Pk): 26900 N | Mass: 325 g | Holder Material: High-strength zinc alloy | Stud Material: S35C (20~28HRC), chromate treatment | Lubrication: Lithium grease No.2 (boot + cap) | Recommended Mating Hole: H10 | Left-hand thread: L engraved on cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"THK","offers":[{"title":"Default Title","offer_id":67396803756322,"sku":"THK-BL","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/0744\/7586\/files\/001-1064.png?v=1790665921","url":"https:\/\/prosourcemro.com\/products\/thk-link-ball-bl-bl-a","provider":"ProSource MRO","version":"1.0","type":"link"}