![[OMRON] — E3ZR-CT Oil-resistant Through-beam Photoelectric Sensor (Fluororesin Cable, Laser-welded Housing)](https://img.prosourcemro.com/2026/05/001-313.png)
Photoelectric
Omron
[OMRON] — E3ZR-CT Oil-resistant Through-beam Photoelectric Sensor (Fluororesin Cable, Laser-welded Housing)
Family ID: OMRON-E3ZR-CT
OMRON E3ZR-CT Oil-resistant Through-beam Photoelectric Sensor — Environment-resistant Series. Sensing distance 30 m with opaque 12 mm dia. min. object. Red LED light source (624 nm). Fluororesin outer cable sheath, laser-welded metal-to-metal joints, and HNBR/fluororubber O-rings for adhesive-free complete sealing. SUS316L housing. Available as Sets (Emitter + Receiver), or Emitter-only / Receiver-only for replacement. NPN (61) or PNP (81) output, Light ON (L) or Dark ON (D) operation mode. Pre-wired (2 m) or M12 Smartclick Pre-wired Connector (0.3 m) variants. Response time 1 ms. IP67G (JIS C 0920 Annex 1). Operating temperature −25 to +55 °C.
24 product codes available in this family
Product Codes & Specifications
| Product Code | Description | Brand | Spec | ||
|---|---|---|---|---|---|
| E3ZR-CT61L 2M | E3ZR-CT NPN, Light ON, Set (Emitter + Receiver), Pre-wired (2 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: NPN open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Light ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: Pre-wired (2 m) | Component: Set (Emitter + Receiver) | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 200 g (set) | Compatible Connector: — | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT61L-L 2M | E3ZR-CT NPN, Light ON, Emitter only, Pre-wired (2 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: NPN open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Light ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: Pre-wired (2 m) | Component: Emitter only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 200 g (set) | Compatible Connector: — | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT61L-D 2M | E3ZR-CT NPN, Light ON, Receiver only, Pre-wired (2 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: NPN open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Light ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: Pre-wired (2 m) | Component: Receiver only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 200 g (set) | Compatible Connector: — | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT61L-M1TJ 0.3M | E3ZR-CT NPN, Light ON, Set (Emitter + Receiver), M12 Smartclick Pre-wired Connector (0.3 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: NPN open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Light ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: M12 Smartclick Pre-wired Connector (0.3 m) | Component: Set (Emitter + Receiver) | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 140 g (set) | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT61L-L-M1TJ 0.3M | E3ZR-CT NPN, Light ON, Emitter only, M12 Smartclick Pre-wired Connector (0.3 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: NPN open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Light ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: M12 Smartclick Pre-wired Connector (0.3 m) | Component: Emitter only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 140 g (set) | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT61L-D-M1TJ 0.3M | E3ZR-CT NPN, Light ON, Receiver only, M12 Smartclick Pre-wired Connector (0.3 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: NPN open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Light ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: M12 Smartclick Pre-wired Connector (0.3 m) | Component: Receiver only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 140 g (set) | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT61D 2M | E3ZR-CT NPN, Dark ON, Set (Emitter + Receiver), Pre-wired (2 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: NPN open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Dark ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: Pre-wired (2 m) | Component: Set (Emitter + Receiver) | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 200 g (set) | Compatible Connector: — | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT61D-L 2M | E3ZR-CT NPN, Dark ON, Emitter only, Pre-wired (2 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: NPN open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Dark ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: Pre-wired (2 m) | Component: Emitter only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 200 g (set) | Compatible Connector: — | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT61D-D 2M | E3ZR-CT NPN, Dark ON, Receiver only, Pre-wired (2 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: NPN open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Dark ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: Pre-wired (2 m) | Component: Receiver only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 200 g (set) | Compatible Connector: — | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT61D-M1TJ 0.3M | E3ZR-CT NPN, Dark ON, Set (Emitter + Receiver), M12 Smartclick Pre-wired Connector (0.3 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: NPN open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Dark ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: M12 Smartclick Pre-wired Connector (0.3 m) | Component: Set (Emitter + Receiver) | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 140 g (set) | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT61D-L-M1TJ 0.3M | E3ZR-CT NPN, Dark ON, Emitter only, M12 Smartclick Pre-wired Connector (0.3 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: NPN open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Dark ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: M12 Smartclick Pre-wired Connector (0.3 m) | Component: Emitter only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 140 g (set) | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT61D-D-M1TJ 0.3M | E3ZR-CT NPN, Dark ON, Receiver only, M12 Smartclick Pre-wired Connector (0.3 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: NPN open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Dark ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: M12 Smartclick Pre-wired Connector (0.3 m) | Component: Receiver only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 140 g (set) | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT81L 2M | E3ZR-CT PNP, Light ON, Set (Emitter + Receiver), Pre-wired (2 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: PNP open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Light ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: Pre-wired (2 m) | Component: Set (Emitter + Receiver) | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 200 g (set) | Compatible Connector: — | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT81L-L 2M | E3ZR-CT PNP, Light ON, Emitter only, Pre-wired (2 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: PNP open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Light ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: Pre-wired (2 m) | Component: Emitter only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 200 g (set) | Compatible Connector: — | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT81L-D 2M | E3ZR-CT PNP, Light ON, Receiver only, Pre-wired (2 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: PNP open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Light ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: Pre-wired (2 m) | Component: Receiver only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 200 g (set) | Compatible Connector: — | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT81L-M1TJ 0.3M | E3ZR-CT PNP, Light ON, Set (Emitter + Receiver), M12 Smartclick Pre-wired Connector (0.3 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: PNP open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Light ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: M12 Smartclick Pre-wired Connector (0.3 m) | Component: Set (Emitter + Receiver) | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 140 g (set) | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT81L-L-M1TJ 0.3M | E3ZR-CT PNP, Light ON, Emitter only, M12 Smartclick Pre-wired Connector (0.3 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: PNP open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Light ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: M12 Smartclick Pre-wired Connector (0.3 m) | Component: Emitter only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 140 g (set) | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT81L-D-M1TJ 0.3M | E3ZR-CT PNP, Light ON, Receiver only, M12 Smartclick Pre-wired Connector (0.3 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: PNP open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Light ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: M12 Smartclick Pre-wired Connector (0.3 m) | Component: Receiver only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 140 g (set) | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT81D 2M | E3ZR-CT PNP, Dark ON, Set (Emitter + Receiver), Pre-wired (2 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: PNP open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Dark ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: Pre-wired (2 m) | Component: Set (Emitter + Receiver) | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 200 g (set) | Compatible Connector: — | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT81D-L 2M | E3ZR-CT PNP, Dark ON, Emitter only, Pre-wired (2 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: PNP open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Dark ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: Pre-wired (2 m) | Component: Emitter only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 200 g (set) | Compatible Connector: — | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT81D-D 2M | E3ZR-CT PNP, Dark ON, Receiver only, Pre-wired (2 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: PNP open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Dark ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: Pre-wired (2 m) | Component: Receiver only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 200 g (set) | Compatible Connector: — | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT81D-M1TJ 0.3M | E3ZR-CT PNP, Dark ON, Set (Emitter + Receiver), M12 Smartclick Pre-wired Connector (0.3 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: PNP open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Dark ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: M12 Smartclick Pre-wired Connector (0.3 m) | Component: Set (Emitter + Receiver) | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 140 g (set) | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT81D-L-M1TJ 0.3M | E3ZR-CT PNP, Dark ON, Emitter only, M12 Smartclick Pre-wired Connector (0.3 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: PNP open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Dark ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: M12 Smartclick Pre-wired Connector (0.3 m) | Component: Emitter only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 140 g (set) | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max | ||
| E3ZR-CT81D-D-M1TJ 0.3M | E3ZR-CT PNP, Dark ON, Receiver only, M12 Smartclick Pre-wired Connector (0.3 m) | OMRON | Sensing Method: Through-beam | Sensing Distance: 30 m | Standard Sensing Object: Opaque 12 mm dia. min | Directional Angle: 3° to 15° (emitter and receiver, rated sensing distance) | Light Source (Wavelength): Red LED (624 nm) | Power Supply: 12-24 VDC ±10%, ripple p-p 10% max | Current Consumption: 35 mA max total (Emitter 15 mA / Receiver 20 mA) | Output Type: PNP open-collector (26.4 VDC max, 100 mA max, residual 2 V max) | Operation Mode: Dark ON | Response Time: 1 ms max (operate/reset) | Protection Circuits: Reverse polarity / Output short-circuit / Reverse output polarity | Sensitivity Adjustment: None | Ambient Illumination: Incandescent 5,000 lx max / Sunlight 10,000 lx max (receiver side) | Ambient Temperature: Operating −25 to +55 °C / Storage −40 to +70 °C | Ambient Humidity: 35-85% operating / 35-95% storage | Insulation Resistance: 20 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1,000 m/s² 3 times each X/Y/Z | Connection: M12 Smartclick Pre-wired Connector (0.3 m) | Component: Receiver only | Housing Material: SUS316L stainless steel | Lens Material: Methacrylate resin (oil-resistant high molecular weight) | Cable Material: Fluororesin | Indicators: Operation (orange) + Stability (green); Emitter has Power indicator (green) only | Weight (Packed): approx. 140 g (set) | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Sealing: Laser welding (metal-to-metal joints) + HNBR/fluororubber O-rings (metal-to-non-metal) | Degree of Protection: IP67 + IP67G | Extended Cable Length: 5 m version available with '5M' suffix | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max |
