[OMRON] — E2ER Oil-resistant Proximity Sensor (Standard, Shielded, Fluororesin Cable)
Proximity Omron

[OMRON] — E2ER Oil-resistant Proximity Sensor (Standard, Shielded, Fluororesin Cable)

Family ID: OMRON-E2ER

OMRON E2ER Oil-resistant Shielded Proximity Sensor — Environment-resistant Series. Fluororesin cable sheath and heat-welded joint seal block cutting oil ingress for 4-year stable operation. Sizes M8/M12/M18/M30 with sensing distances 2/3/7/10 mm. 10-30 VDC, 100 mA load, NO (D1) or NC (D2) operation. IP67G (JIS C 0920 Annex 1). Operating temperature −25 to +70 °C. Pre-wired (2 m fluororesin cable) or M12 Smartclick Pre-wired Connector (0.3 m) variants. Verified against 13 representative water-soluble and 6 water-insoluble cutting oils.

16 product codes available in this family

RFQ Cart (0)

Product Codes & Specifications

Product Code Description Brand Spec
E2ER-X2D1 2M E2ER M8 shielded proximity, 2 mm ±10%, NO, Pre-wired (2 m) OMRON Size: M8 | Type: Shielded (standard) | Sensing Distance: 2 mm ±10% | Set Distance: 0-1.6 mm | Differential Travel: 15% max (M8) / 10% max (M12-M30) | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 8×8×1 mm | Response Frequency: 1.5 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NO (1: Operation indicator red + Setting indicator green) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: Pre-wired (2 m) | Cable Specification: 3.6 mm fluoro-insulated (0.2 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±15% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 500 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Stainless steel (SUS303) | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: — | Weight (Packed): approx. 65 g | Compatible Connector: — | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X2D1-M1TGJ 0.3M E2ER M8 shielded proximity, 2 mm ±10%, NO, M12 Pre-wired Smartclick Connector (0.3 m) OMRON Size: M8 | Type: Shielded (standard) | Sensing Distance: 2 mm ±10% | Set Distance: 0-1.6 mm | Differential Travel: 15% max (M8) / 10% max (M12-M30) | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 8×8×1 mm | Response Frequency: 1.5 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NO (1: Operation indicator red + Setting indicator green) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: M12 Pre-wired Smartclick Connector (0.3 m) | Cable Specification: 3.6 mm fluoro-insulated (0.2 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±15% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 500 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Stainless steel (SUS303) | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: — | Weight (Packed): approx. 30 g | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X2D2 2M E2ER M8 shielded proximity, 2 mm ±10%, NC, Pre-wired (2 m) OMRON Size: M8 | Type: Shielded (standard) | Sensing Distance: 2 mm ±10% | Set Distance: 0-1.6 mm | Differential Travel: 15% max (M8) / 10% max (M12-M30) | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 8×8×1 mm | Response Frequency: 1.5 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NC (2: Operation indicator red only) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: Pre-wired (2 m) | Cable Specification: 3.6 mm fluoro-insulated (0.2 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±15% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 500 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Stainless steel (SUS303) | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: — | Weight (Packed): approx. 65 g | Compatible Connector: — | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X2D2-M1TGJ 0.3M E2ER M8 shielded proximity, 2 mm ±10%, NC, M12 Pre-wired Smartclick Connector (0.3 m) OMRON Size: M8 | Type: Shielded (standard) | Sensing Distance: 2 mm ±10% | Set Distance: 0-1.6 mm | Differential Travel: 15% max (M8) / 10% max (M12-M30) | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 8×8×1 mm | Response Frequency: 1.5 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NC (2: Operation indicator red only) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: M12 Pre-wired Smartclick Connector (0.3 m) | Cable Specification: 3.6 mm fluoro-insulated (0.2 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±15% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 500 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Stainless steel (SUS303) | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: — | Weight (Packed): approx. 30 g | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X3D1 2M E2ER M12 shielded proximity, 3 mm ±10%, NO, Pre-wired (2 m) OMRON Size: M12 | Type: Shielded (standard) | Sensing Distance: 3 mm ±10% | Set Distance: 0-2.4 mm | Differential Travel: 10% max of sensing distance | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 12×12×1 mm | Response Frequency: 1 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NO (1: Operation indicator red + Setting indicator green) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: Pre-wired (2 m) | Cable Specification: 3.6 mm fluoro-insulated (0.2 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±10% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1000 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Nickel-plated brass | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: Nickel-plated brass | Weight (Packed): approx. 75 g | Compatible Connector: — | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X3D1-M1TGJ 0.3M E2ER M12 shielded proximity, 3 mm ±10%, NO, M12 Pre-wired Smartclick Connector (0.3 m) OMRON Size: M12 | Type: Shielded (standard) | Sensing Distance: 3 mm ±10% | Set Distance: 0-2.4 mm | Differential Travel: 10% max of sensing distance | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 12×12×1 mm | Response Frequency: 1 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NO (1: Operation indicator red + Setting indicator green) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: M12 Pre-wired Smartclick Connector (0.3 m) | Cable Specification: 3.6 mm fluoro-insulated (0.2 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±10% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1000 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Nickel-plated brass | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: Nickel-plated brass | Weight (Packed): approx. 40 g | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X3D2 2M E2ER M12 shielded proximity, 3 mm ±10%, NC, Pre-wired (2 m) OMRON Size: M12 | Type: Shielded (standard) | Sensing Distance: 3 mm ±10% | Set Distance: 0-2.4 mm | Differential Travel: 10% max of sensing distance | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 12×12×1 mm | Response Frequency: 1 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NC (2: Operation indicator red only) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: Pre-wired (2 m) | Cable Specification: 3.6 mm fluoro-insulated (0.2 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±10% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1000 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Nickel-plated brass | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: Nickel-plated brass | Weight (Packed): approx. 75 g | Compatible Connector: — | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X3D2-M1TGJ 0.3M E2ER M12 shielded proximity, 3 mm ±10%, NC, M12 Pre-wired Smartclick Connector (0.3 m) OMRON Size: M12 | Type: Shielded (standard) | Sensing Distance: 3 mm ±10% | Set Distance: 0-2.4 mm | Differential Travel: 10% max of sensing distance | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 12×12×1 mm | Response Frequency: 1 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NC (2: Operation indicator red only) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: M12 Pre-wired Smartclick Connector (0.3 m) | Cable Specification: 3.6 mm fluoro-insulated (0.2 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±10% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1000 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Nickel-plated brass | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: Nickel-plated brass | Weight (Packed): approx. 40 g | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X7D1 2M E2ER M18 shielded proximity, 7 mm ±10%, NO, Pre-wired (2 m) OMRON Size: M18 | Type: Shielded (standard) | Sensing Distance: 7 mm ±10% | Set Distance: 0-5.6 mm | Differential Travel: 10% max of sensing distance | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 18×18×1 mm | Response Frequency: 0.5 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NO (1: Operation indicator red + Setting indicator green) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: Pre-wired (2 m) | Cable Specification: 5.0 mm fluoro-insulated (0.5 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±10% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1000 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Nickel-plated brass | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: Nickel-plated brass | Weight (Packed): approx. 145 g | Compatible Connector: — | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X7D1-M1TGJ 0.3M E2ER M18 shielded proximity, 7 mm ±10%, NO, M12 Pre-wired Smartclick Connector (0.3 m) OMRON Size: M18 | Type: Shielded (standard) | Sensing Distance: 7 mm ±10% | Set Distance: 0-5.6 mm | Differential Travel: 10% max of sensing distance | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 18×18×1 mm | Response Frequency: 0.5 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NO (1: Operation indicator red + Setting indicator green) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: M12 Pre-wired Smartclick Connector (0.3 m) | Cable Specification: 5.0 mm fluoro-insulated (0.5 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±10% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1000 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Nickel-plated brass | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: Nickel-plated brass | Weight (Packed): approx. 90 g | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X7D2 2M E2ER M18 shielded proximity, 7 mm ±10%, NC, Pre-wired (2 m) OMRON Size: M18 | Type: Shielded (standard) | Sensing Distance: 7 mm ±10% | Set Distance: 0-5.6 mm | Differential Travel: 10% max of sensing distance | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 18×18×1 mm | Response Frequency: 0.5 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NC (2: Operation indicator red only) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: Pre-wired (2 m) | Cable Specification: 5.0 mm fluoro-insulated (0.5 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±10% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1000 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Nickel-plated brass | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: Nickel-plated brass | Weight (Packed): approx. 145 g | Compatible Connector: — | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X7D2-M1TGJ 0.3M E2ER M18 shielded proximity, 7 mm ±10%, NC, M12 Pre-wired Smartclick Connector (0.3 m) OMRON Size: M18 | Type: Shielded (standard) | Sensing Distance: 7 mm ±10% | Set Distance: 0-5.6 mm | Differential Travel: 10% max of sensing distance | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 18×18×1 mm | Response Frequency: 0.5 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NC (2: Operation indicator red only) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: M12 Pre-wired Smartclick Connector (0.3 m) | Cable Specification: 5.0 mm fluoro-insulated (0.5 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±10% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1000 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Nickel-plated brass | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: Nickel-plated brass | Weight (Packed): approx. 90 g | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X10D1 2M E2ER M30 shielded proximity, 10 mm ±10%, NO, Pre-wired (2 m) OMRON Size: M30 | Type: Shielded (standard) | Sensing Distance: 10 mm ±10% | Set Distance: 0-8 mm | Differential Travel: 10% max of sensing distance | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 30×30×1 mm | Response Frequency: 0.4 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NO (1: Operation indicator red + Setting indicator green) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: Pre-wired (2 m) | Cable Specification: 5.0 mm fluoro-insulated (0.5 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±10% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1000 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Nickel-plated brass | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: Nickel-plated brass | Weight (Packed): approx. 215 g | Compatible Connector: — | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X10D1-M1TGJ 0.3M E2ER M30 shielded proximity, 10 mm ±10%, NO, M12 Pre-wired Smartclick Connector (0.3 m) OMRON Size: M30 | Type: Shielded (standard) | Sensing Distance: 10 mm ±10% | Set Distance: 0-8 mm | Differential Travel: 10% max of sensing distance | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 30×30×1 mm | Response Frequency: 0.4 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NO (1: Operation indicator red + Setting indicator green) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: M12 Pre-wired Smartclick Connector (0.3 m) | Cable Specification: 5.0 mm fluoro-insulated (0.5 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±10% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1000 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Nickel-plated brass | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: Nickel-plated brass | Weight (Packed): approx. 155 g | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X10D2 2M E2ER M30 shielded proximity, 10 mm ±10%, NC, Pre-wired (2 m) OMRON Size: M30 | Type: Shielded (standard) | Sensing Distance: 10 mm ±10% | Set Distance: 0-8 mm | Differential Travel: 10% max of sensing distance | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 30×30×1 mm | Response Frequency: 0.4 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NC (2: Operation indicator red only) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: Pre-wired (2 m) | Cable Specification: 5.0 mm fluoro-insulated (0.5 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±10% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1000 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Nickel-plated brass | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: Nickel-plated brass | Weight (Packed): approx. 215 g | Compatible Connector: — | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max
E2ER-X10D2-M1TGJ 0.3M E2ER M30 shielded proximity, 10 mm ±10%, NC, M12 Pre-wired Smartclick Connector (0.3 m) OMRON Size: M30 | Type: Shielded (standard) | Sensing Distance: 10 mm ±10% | Set Distance: 0-8 mm | Differential Travel: 10% max of sensing distance | Detectable Object: Ferrous metal (sensing distance decreases with non-ferrous metal) | Standard Sensing Object: Iron 30×30×1 mm | Response Frequency: 0.4 kHz | Power Supply: 10-30 VDC (10% ripple p-p) | Leakage Current: 0.8 mA max | Load Current: 3-100 mA | Residual Voltage: 3 V max (100 mA load, 2 m cable) | Operation Mode: NC (2: Operation indicator red only) | Protection Circuits: Surge suppressor / Load short-circuit protection | Connection: M12 Pre-wired Smartclick Connector (0.3 m) | Cable Specification: 5.0 mm fluoro-insulated (0.5 mm² conductor) | Ambient Temperature: Operating −25 to +70 °C / Storage −40 to +85 °C | Ambient Humidity: 35-95% RH (operating and storage) | Temperature Influence: ±10% max at 23 °C in −25 to +70 °C range | Voltage Influence: ±1% max at rated voltage ±15% | Insulation Resistance: 50 MΩ min at 500 VDC | Dielectric Strength: 1,000 VAC 50/60 Hz 1 min | Vibration Resistance: 10-55 Hz 1.5 mm double amplitude, 2 h each X/Y/Z | Shock Resistance: 1000 m/s² 10 times each X/Y/Z | Degree of Protection: IP67 (IEC 60529) + IP67G (JIS C 0920 Annex 1) | Case Material: Nickel-plated brass | Sensing Surface: Polybutylene terephthalate (PBT) | Clamping Nuts: Nickel-plated brass | Weight (Packed): approx. 155 g | Compatible Connector: XS5FR-D423-D80-RB1 (2 m) / -G80-RB1 (5 m) / -J80-RB1 (10 m), sold separately | Extended Cable Length: 5 m version available with '5M' suffix (e.g., E2ER-X2D1 5M) | Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) | Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils | Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards | Applicable Oil Types: JIS K 2241:2000 specified cutting oils | Evaluation Temperature: 35 °C max

Related Products

[OMRON] — E2E NEXT Standard Distance Proximity Sensor (M18, Unshielded, DC 2-Wire) 11 codes
[AUTONICS] PR Series Cylindrical Inductive Proximity Sensors 41 codes
[OMRON] — E2E NEXT Standard Distance Proximity Sensor (M18, Shielded, DC 2-Wire) 11 codes
[AUTONICS] PFI Series Rectangular Flat-Type Inductive Proximity Sensors 6 codes
[OMRON] — E2E NEXT Standard Distance Proximity Sensor (M30, Unshielded, DC 2-Wire) 11 codes
[OMRON] — E2J Flat Capacitive Separate Amplifier Proximity Sensor Head (10mm/20mm, Robot Hand) 2 codes
[OMRON] — E2EW Welding Proximity Sensor BASIC Double (M12/M18/M30, DC 3-Wire) 36 codes
[OMRON] — E2E NEXT BASIC Single distance Proximity Sensor (M18, Shielded, DC 3-Wire, IO-Link, NPN/PNP) 56 codes
[OMRON] — E2B M8 Cylindrical Proximity Sensor (Single/Double, Shielded/Unshielded, SUS, PNP/NPN) 96 codes
[OMRON] — E2E NEXT PREMIUM Triple distance Proximity Sensor (M12, Shielded, DC 3-Wire, IO-Link, NPN/PNP) 56 codes
[OMRON] — E2E NEXT PREMIUM Quadruple distance Proximity Sensor (M12, Shielded, DC 3-Wire, IO-Link, NPN/PNP) 56 codes
[OMRON] — E2E NEXT Double Distance Proximity Sensor (M12, Shielded, DC 2-Wire, No Polarity) 4 codes
[OMRON] — E2E AC 2-Wire Proximity Sensor (Shielded, M12/M18/M30, NO/NC) 12 codes
[OMRON] — E2EW-Q Spatter-resistant Welding Proximity Sensor PREMIUM Quadruple (M12/M18/M30, DC 3-Wire) 72 codes
[OMRON] — E2E NEXT PREMIUM Quadruple distance Proximity Sensor (M18, Shielded, DC 3-Wire, IO-Link, NPN/PNP) 56 codes
[OMRON] — E2E Small-diameter Proximity Sensor (M4, Shielded, 0.8 mm, NPN/PNP) 12 codes
[OMRON] — E2E NEXT PREMIUM Quadruple distance Proximity Sensor (M8, Shielded, DC 3-Wire, IO-Link, NPN/PNP) 68 codes
[OMRON] — E2E NEXT PREMIUM Quadruple distance Proximity Sensor (M18, Unshielded, DC 3-Wire, IO-Link, NPN/PNP) 56 codes
[OMRON] — E2EW-Q Spatter-resistant Welding Proximity Sensor BASIC Single (M8/M12/M18/M30, DC 3-Wire) 37 codes
[OMRON] — E2E NEXT BASIC Double distance Proximity Sensor (M8, Shielded, DC 3-Wire, IO-Link, NPN/PNP) 68 codes