[YUKEN] — LSVHG-06EH-900 Two-Stage OBE Linear Servo Valve (900 L/min)
Servo Valves Yuken

[YUKEN] — LSVHG-06EH-900 Two-Stage OBE Linear Servo Valve (900 L/min)

Family ID: YK-LSVHG06EH-900

On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 900 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.

24 product codes available in this family

RFQ Cart (0)

Product Codes & Specifications

Product Code Description Brand Spec
LSVHG-06EH-900-2-A LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2, input A YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2 | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2-B LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2, input B YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2 | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2-C LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2, input C YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2 | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2-D LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2, input D YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2 | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2-E LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2, input E YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2 | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2-F LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2, input F YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2 | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-40-A LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 40, input A YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-40-B LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 40, input B YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-40-C LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 40, input C YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-40-D LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 40, input D YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-40-E LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 40, input E YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-40-F LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 40, input F YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2P-A LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2P, input A YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2P-B LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2P, input B YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2P-C LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2P, input C YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2P-D LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2P, input D YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2P-E LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2P, input E YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2P-F LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2P, input F YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2L-A LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2L, input A YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2L | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2L-B LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2L, input B YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2L | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2L-C LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2L, input C YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2L | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2L-D LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2L, input D YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2L | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2L-E LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2L, input E YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2L | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33
LSVHG-06EH-900-2L-F LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2L, input F YUKEN Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2L | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33

Related Products

[YUKEN] — ESHG Servo-Piloted High-Speed Proportional Valve 3 codes
[YUKEN] — LSVHG-04EH-S High-Performance Two-Stage OBE Linear Servo Valve (100–450 L/min) 36 codes
[YUKEN] — LSVHG-03EH-230 Two-Stage OBE Linear Servo Valve (230 L/min) 6 codes
[YUKEN] — LSVG-03 Direct Type High-Speed Linear Servo Valve 5 codes
[YUKEN] — LSVHG-04-750 Two-Stage High-Speed Linear Servo Valve (750 L/min) 3 codes
[YUKEN] — LSVHG-06-1300 Two-Stage High-Speed Linear Servo Valve (1300 L/min) 3 codes
[YUKEN] — LSVG-03EH On-Board Electronic Direct Linear Servo Valve 12 codes
[YUKEN] — LSVHG-06EH-820 Two-Stage OBE Linear Servo Valve (820 L/min) 6 codes
[YUKEN] — LSVHG-10-3800 Two-Stage High-Speed Linear Servo Valve (3800 L/min) 3 codes
[YUKEN] — LSVHG-03EH-210 Two-Stage OBE Linear Servo Valve (210 L/min) 6 codes
[YUKEN] — SVC-F1 Mechanical Servo Valve 4 codes
[YUKEN] — LSVG-01EH On-Board Electronic Direct Linear Servo Valve 18 codes
[YUKEN] — LSVHG-06-900 Two-Stage High-Speed Linear Servo Valve (900 L/min) 3 codes
[YUKEN] — LSVHG-03EH-270 Two-Stage OBE Linear Servo Valve (270 L/min) 18 codes
[YUKEN] — LSVHG-04EH-750 Two-Stage OBE Linear Servo Valve (750 L/min) 24 codes
[YUKEN] — LSVHG-06EH-1300 Two-Stage OBE Linear Servo Valve (1300 L/min) 30 codes
[YUKEN] — LSVHG-04EH-580 Two-Stage OBE Linear Servo Valve (580 L/min) 6 codes
[YUKEN] — LSVHG-06EH-S High-Performance Two-Stage OBE Linear Servo Valve (500–900 L/min) 18 codes
[YUKEN] — LSVHG-03EH-S High-Performance Two-Stage OBE Linear Servo Valve (60–160 L/min) 27 codes
[YUKEN] — SVD-F11 Electro-Hydraulic Two-Stage Servo Valve 5 codes