🔍
Can't find your part? We source far beyond this catalog —
list any MRO part, even if it's not listed here, and we'll quote it direct from Korean makers.
Submit an RFQ →
Servo Valves
![[YUKEN] — ESHG Servo-Piloted High-Speed Proportional Valve](https://img.prosourcemro.com/2026/05/002-156-300x214.png)
Servo-piloted high-speed proportional valve developed primarily for cost-effective control of large flow rates. The SVD-F11 / F102 servo valve serves as the pilot stage driving the main spool; main-spool positioning uses electrical feedback via a differential transformer, with a servo amplifier built into the main valve forming a minor loop within the valve itself. Spool forms 2 / 2P / 2L / 40. Valve sizes 04 / 06 / 10. Max pressure 21 MPa (size 04) / 25 MPa (sizes 06, 10). Internal/external pilot and drain configurations available. Order designation by RFQ / consultation.
Servo-piloted high-speed proportional valve developed primarily for cost-effective control of large flow rates. The SVD-F11 / F102 servo valve serves as the pilot stage driving the main spool; main-spool positioning uses electrical feedback via a differential transformer, with a servo amplifier built into the main valve forming a minor loop within the valve itself. Spool forms 2 / 2P / 2L / 40. Valve sizes 04 / 06 / 10. Max pressure 21 MPa (size 04) / 25 MPa (sizes 06, 10). Internal/external pilot and drain configurations available. Order designation by RFQ / consultation.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ESHG-04 | ESHG Servo-Piloted Proportional Valve, size 04 (RFQ) | YUKEN | Type: Servo-piloted high-speed proportional valve (SVD-F11/F102 pilot stage) | Valve Size: 04 | Max Operating Pressure: 21 MPa | Spool Forms: 2 / 2P / 2L / 40 | Feedback: Differential transformer (electrical), built-in servo amplifier (minor loop) | Pilot / Drain: Internal/external pilot, internal/external drain configurations | Ordering: Exact order designation by RFQ / consultation | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-62 | |
| ESHG-06 | ESHG Servo-Piloted Proportional Valve, size 06 (RFQ) | YUKEN | Type: Servo-piloted high-speed proportional valve (SVD-F11/F102 pilot stage) | Valve Size: 06 | Max Operating Pressure: 25 MPa | Spool Forms: 2 / 2P / 2L / 40 | Feedback: Differential transformer (electrical), built-in servo amplifier (minor loop) | Pilot / Drain: Internal/external pilot, internal/external drain configurations | Ordering: Exact order designation by RFQ / consultation | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-62 | |
| ESHG-10 | ESHG Servo-Piloted Proportional Valve, size 10 (RFQ) | YUKEN | Type: Servo-piloted high-speed proportional valve (SVD-F11/F102 pilot stage) | Valve Size: 10 | Max Operating Pressure: 25 MPa | Spool Forms: 2 / 2P / 2L / 40 | Feedback: Differential transformer (electrical), built-in servo amplifier (minor loop) | Pilot / Drain: Internal/external pilot, internal/external drain configurations | Ordering: Exact order designation by RFQ / consultation | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-62 |
![[YUKEN] — LSVG-01EH On-Board Electronic Direct Linear Servo Valve](https://img.prosourcemro.com/2026/05/002-152-300x224.png)
On-board electronic (OBE) type direct-operated linear servo valve, realizing the 'high precision, simple, convenient' concept of the LSVG and LSVHG-EH series in a direct-operated form. Hysteresis 0.1% or less; step response 3 ms; frequency response up to 260 Hz. Operates from a DC 24 V supply with command-signal input only; built-in amplifier with fault-diagnosis indicator. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Safety device PABT / PBAT / neutral; connector 6+PE / 11+PE; dry (Y-port) or wet (no Y-port) type — selectable per order.
On-board electronic (OBE) type direct-operated linear servo valve, realizing the 'high precision, simple, convenient' concept of the LSVG and LSVHG-EH series in a direct-operated form. Hysteresis 0.1% or less; step response 3 ms; frequency response up to 260 Hz. Operates from a DC 24 V supply with command-signal input only; built-in amplifier with fault-diagnosis indicator. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Safety device PABT / PBAT / neutral; connector 6+PE / 11+PE; dry (Y-port) or wet (no Y-port) type — selectable per order.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVG-01EH-4-A | LSVG-01EH OBE Direct Servo Valve, 4 L/min, input A | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 4 L/min | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 0.4 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-4-B | LSVG-01EH OBE Direct Servo Valve, 4 L/min, input B | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 4 L/min | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA input → PBAT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 0.4 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-4-C | LSVG-01EH OBE Direct Servo Valve, 4 L/min, input C | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 4 L/min | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 0.4 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-4-D | LSVG-01EH OBE Direct Servo Valve, 4 L/min, input D | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 4 L/min | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 0.4 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-4-E | LSVG-01EH OBE Direct Servo Valve, 4 L/min, input E | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 4 L/min | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA input → PABT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 0.4 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-4-F | LSVG-01EH OBE Direct Servo Valve, 4 L/min, input F | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 4 L/min | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 0.4 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-10-A | LSVG-01EH OBE Direct Servo Valve, 10 L/min, input A | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 10 L/min | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 0.8 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-10-B | LSVG-01EH OBE Direct Servo Valve, 10 L/min, input B | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 10 L/min | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA input → PBAT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 0.8 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-10-C | LSVG-01EH OBE Direct Servo Valve, 10 L/min, input C | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 10 L/min | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 0.8 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-10-D | LSVG-01EH OBE Direct Servo Valve, 10 L/min, input D | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 10 L/min | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 0.8 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-10-E | LSVG-01EH OBE Direct Servo Valve, 10 L/min, input E | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 10 L/min | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA input → PABT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 0.8 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-10-F | LSVG-01EH OBE Direct Servo Valve, 10 L/min, input F | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 10 L/min | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 0.8 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-20-A | LSVG-01EH OBE Direct Servo Valve, 20 L/min, input A | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 20 L/min | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.2 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-20-B | LSVG-01EH OBE Direct Servo Valve, 20 L/min, input B | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 20 L/min | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA input → PBAT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.2 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-20-C | LSVG-01EH OBE Direct Servo Valve, 20 L/min, input C | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 20 L/min | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.2 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-20-D | LSVG-01EH OBE Direct Servo Valve, 20 L/min, input D | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 20 L/min | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.2 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-20-E | LSVG-01EH OBE Direct Servo Valve, 20 L/min, input E | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 20 L/min | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA input → PABT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.2 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-01EH-20-F | LSVG-01EH OBE Direct Servo Valve, 20 L/min, input F | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 01 (ISO 4401-03) | Rated Flow (ΔP=7MPa): 20 L/min | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 21 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.2 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 240 Hz (230) | Frequency Resp. (−90° phase): 300 Hz (270) | Spool Rated Stroke: ±0.5 mm | Mass: 4.3 kg | Mounting Bolts: M5×55L ×4 (6.0–8.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 |
![[YUKEN] — LSVG-03 Direct Type High-Speed Linear Servo Valve](https://img.prosourcemro.com/2026/05/002-149-300x182.png)
Direct type high-speed linear servo valve using a compact, powerful linear motor as the actuator, with the moving coil, spool, and position sensor combined in series for a very simple structure. Hysteresis 0.1% or less; step response 2 ms (size 60: 3 ms); frequency response −3 dB gain up to 350 Hz. Excellent vibration resistance from the simple construction and superior contamination tolerance, usable to NAS 1638 class 10 (ISO4406 21/19/15). Max operating pressure 35 MPa. Neutral zero-lap spool. Requires dedicated AMLS linear servo amplifier.
Direct type high-speed linear servo valve using a compact, powerful linear motor as the actuator, with the moving coil, spool, and position sensor combined in series for a very simple structure. Hysteresis 0.1% or less; step response 2 ms (size 60: 3 ms); frequency response −3 dB gain up to 350 Hz. Excellent vibration resistance from the simple construction and superior contamination tolerance, usable to NAS 1638 class 10 (ISO4406 21/19/15). Max operating pressure 35 MPa. Neutral zero-lap spool. Requires dedicated AMLS linear servo amplifier.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVG-03-4-10 | LSVG-03 Direct Linear Servo Valve, 4 L/min (ΔP=7MPa) | YUKEN | Type: Direct (single-stage), neutral zero-lap | Valve Size: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 4 L/min | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Drain Port Y Back Pressure: 0.05 MPa max | Hysteresis: 0.1% max | Step Response (0↔100%): 2 ms (3) | Frequency Resp. (−3 dB gain): 350 Hz (300) | Frequency Resp. (−90° phase): 450 Hz (370) | Spool Rated Stroke: ±0.5 mm | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 5 kg | Mounting Bolts: M8×65L ×4, 30.8–37.7 N·m (M6 spec on request) | Dedicated Amplifier: AMLS-A-D48/D24 | Cable Port Direction: Top (standard) / R (right) / L (left) — select per order | Fluid: Mineral oil (standard) / Phosphate-ester (F prefix, fluoro rubber seals) | Source: Yuken Cat. I-Edit0, I-5/I-6 | |
| LSVG-03-10-10 | LSVG-03 Direct Linear Servo Valve, 10 L/min (ΔP=7MPa) | YUKEN | Type: Direct (single-stage), neutral zero-lap | Valve Size: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 10 L/min | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Drain Port Y Back Pressure: 0.05 MPa max | Hysteresis: 0.1% max | Step Response (0↔100%): 2 ms (3) | Frequency Resp. (−3 dB gain): 350 Hz (300) | Frequency Resp. (−90° phase): 450 Hz (370) | Spool Rated Stroke: ±0.5 mm | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 5 kg | Mounting Bolts: M8×65L ×4, 30.8–37.7 N·m (M6 spec on request) | Dedicated Amplifier: AMLS-A-D48/D24 | Cable Port Direction: Top (standard) / R (right) / L (left) — select per order | Fluid: Mineral oil (standard) / Phosphate-ester (F prefix, fluoro rubber seals) | Source: Yuken Cat. I-Edit0, I-5/I-6 | |
| LSVG-03-20-10 | LSVG-03 Direct Linear Servo Valve, 20 L/min (ΔP=7MPa) | YUKEN | Type: Direct (single-stage), neutral zero-lap | Valve Size: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 20 L/min | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Drain Port Y Back Pressure: 0.05 MPa max | Hysteresis: 0.1% max | Step Response (0↔100%): 2 ms (3) | Frequency Resp. (−3 dB gain): 350 Hz (300) | Frequency Resp. (−90° phase): 450 Hz (370) | Spool Rated Stroke: ±0.5 mm | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 5 kg | Mounting Bolts: M8×65L ×4, 30.8–37.7 N·m (M6 spec on request) | Dedicated Amplifier: AMLS-A-D48/D24 | Cable Port Direction: Top (standard) / R (right) / L (left) — select per order | Fluid: Mineral oil (standard) / Phosphate-ester (F prefix, fluoro rubber seals) | Source: Yuken Cat. I-Edit0, I-5/I-6 | |
| LSVG-03-40-10 | LSVG-03 Direct Linear Servo Valve, 40 L/min (ΔP=7MPa) | YUKEN | Type: Direct (single-stage), neutral zero-lap | Valve Size: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 40 L/min | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Drain Port Y Back Pressure: 0.05 MPa max | Hysteresis: 0.1% max | Step Response (0↔100%): 2 ms (3) | Frequency Resp. (−3 dB gain): 350 Hz (300) | Frequency Resp. (−90° phase): 450 Hz (370) | Spool Rated Stroke: ±0.5 mm | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 5 kg | Mounting Bolts: M8×65L ×4, 30.8–37.7 N·m (M6 spec on request) | Dedicated Amplifier: AMLS-A-D48/D24 | Cable Port Direction: Top (standard) / R (right) / L (left) — select per order | Fluid: Mineral oil (standard) / Phosphate-ester (F prefix, fluoro rubber seals) | Source: Yuken Cat. I-Edit0, I-5/I-6 | |
| LSVG-03-60-10 | LSVG-03 Direct Linear Servo Valve, 60 L/min (ΔP=7MPa) | YUKEN | Type: Direct (single-stage), neutral zero-lap | Valve Size: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 60 L/min | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Drain Port Y Back Pressure: 0.05 MPa max | Hysteresis: 0.1% max | Step Response (0↔100%): 3 ms (4) | Frequency Resp. (−3 dB gain): 330 Hz (240) | Frequency Resp. (−90° phase): 410 Hz (330) | Spool Rated Stroke: ±0.75 mm | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 5 kg | Mounting Bolts: M8×65L ×4, 30.8–37.7 N·m (M6 spec on request) | Dedicated Amplifier: AMLS-B-D48/D24 | Cable Port Direction: Top (standard) / R (right) / L (left) — select per order | Fluid: Mineral oil (standard) / Phosphate-ester (F prefix, fluoro rubber seals) | Source: Yuken Cat. I-Edit0, I-5/I-6 |
On-board electronic (OBE) type direct-operated linear servo valve, realizing the 'high precision, simple, convenient' concept of the LSVG and LSVHG-EH series in a direct-operated form. Hysteresis 0.1% or less; step response 3 ms; frequency response up to 260 Hz. Operates from a DC 24 V supply with command-signal input only; built-in amplifier with fault-diagnosis indicator. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Safety device PABT / PBAT / neutral; connector 6+PE / 11+PE; dry (Y-port) or wet (no Y-port) type — selectable per order.
On-board electronic (OBE) type direct-operated linear servo valve, realizing the 'high precision, simple, convenient' concept of the LSVG and LSVHG-EH series in a direct-operated form. Hysteresis 0.1% or less; step response 3 ms; frequency response up to 260 Hz. Operates from a DC 24 V supply with command-signal input only; built-in amplifier with fault-diagnosis indicator. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Safety device PABT / PBAT / neutral; connector 6+PE / 11+PE; dry (Y-port) or wet (no Y-port) type — selectable per order.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVG-03EH-40-A | LSVG-03EH OBE Direct Servo Valve, 40 L/min, input A | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 40 L/min | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Max Operating Pressure: 35 (31.5 for 1006/M6-bolt type) MPa | Tank Port Pressure: 35 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 260 Hz (240) | Frequency Resp. (−90° phase): 310 Hz (310) | Spool Rated Stroke: ±0.75 mm | Mass: 5.2 kg | Mounting Bolts: M8×65L ×4 (30.8–37.7 N·m); 1006 type M6×60L ×4 (13.0–16.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-03EH-40-B | LSVG-03EH OBE Direct Servo Valve, 40 L/min, input B | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 40 L/min | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA input → PBAT flow) | Max Operating Pressure: 35 (31.5 for 1006/M6-bolt type) MPa | Tank Port Pressure: 35 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 260 Hz (240) | Frequency Resp. (−90° phase): 310 Hz (310) | Spool Rated Stroke: ±0.75 mm | Mass: 5.2 kg | Mounting Bolts: M8×65L ×4 (30.8–37.7 N·m); 1006 type M6×60L ×4 (13.0–16.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-03EH-40-C | LSVG-03EH OBE Direct Servo Valve, 40 L/min, input C | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 40 L/min | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Max Operating Pressure: 35 (31.5 for 1006/M6-bolt type) MPa | Tank Port Pressure: 35 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 260 Hz (240) | Frequency Resp. (−90° phase): 310 Hz (310) | Spool Rated Stroke: ±0.75 mm | Mass: 5.2 kg | Mounting Bolts: M8×65L ×4 (30.8–37.7 N·m); 1006 type M6×60L ×4 (13.0–16.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-03EH-40-D | LSVG-03EH OBE Direct Servo Valve, 40 L/min, input D | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 40 L/min | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Max Operating Pressure: 35 (31.5 for 1006/M6-bolt type) MPa | Tank Port Pressure: 35 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 260 Hz (240) | Frequency Resp. (−90° phase): 310 Hz (310) | Spool Rated Stroke: ±0.75 mm | Mass: 5.2 kg | Mounting Bolts: M8×65L ×4 (30.8–37.7 N·m); 1006 type M6×60L ×4 (13.0–16.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-03EH-40-E | LSVG-03EH OBE Direct Servo Valve, 40 L/min, input E | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 40 L/min | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA input → PABT flow) | Max Operating Pressure: 35 (31.5 for 1006/M6-bolt type) MPa | Tank Port Pressure: 35 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 260 Hz (240) | Frequency Resp. (−90° phase): 310 Hz (310) | Spool Rated Stroke: ±0.75 mm | Mass: 5.2 kg | Mounting Bolts: M8×65L ×4 (30.8–37.7 N·m); 1006 type M6×60L ×4 (13.0–16.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-03EH-40-F | LSVG-03EH OBE Direct Servo Valve, 40 L/min, input F | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 40 L/min | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Max Operating Pressure: 35 (31.5 for 1006/M6-bolt type) MPa | Tank Port Pressure: 35 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Step Response (0↔100%): 3 ms (3.5) | Frequency Resp. (−3 dB gain): 260 Hz (240) | Frequency Resp. (−90° phase): 310 Hz (310) | Spool Rated Stroke: ±0.75 mm | Mass: 5.2 kg | Mounting Bolts: M8×65L ×4 (30.8–37.7 N·m); 1006 type M6×60L ×4 (13.0–16.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-03EH-60-A | LSVG-03EH OBE Direct Servo Valve, 60 L/min, input A | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 60 L/min | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Max Operating Pressure: 35 (31.5 for 1006/M6-bolt type) MPa | Tank Port Pressure: 35 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Step Response (0↔100%): 4 ms (4.5) | Frequency Resp. (−3 dB gain): 250 Hz (220) | Frequency Resp. (−90° phase): 260 Hz (220) | Spool Rated Stroke: ±0.75 mm | Mass: 5.2 kg | Mounting Bolts: M8×65L ×4 (30.8–37.7 N·m); 1006 type M6×60L ×4 (13.0–16.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-03EH-60-B | LSVG-03EH OBE Direct Servo Valve, 60 L/min, input B | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 60 L/min | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA input → PBAT flow) | Max Operating Pressure: 35 (31.5 for 1006/M6-bolt type) MPa | Tank Port Pressure: 35 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Step Response (0↔100%): 4 ms (4.5) | Frequency Resp. (−3 dB gain): 250 Hz (220) | Frequency Resp. (−90° phase): 260 Hz (220) | Spool Rated Stroke: ±0.75 mm | Mass: 5.2 kg | Mounting Bolts: M8×65L ×4 (30.8–37.7 N·m); 1006 type M6×60L ×4 (13.0–16.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-03EH-60-C | LSVG-03EH OBE Direct Servo Valve, 60 L/min, input C | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 60 L/min | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Max Operating Pressure: 35 (31.5 for 1006/M6-bolt type) MPa | Tank Port Pressure: 35 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Step Response (0↔100%): 4 ms (4.5) | Frequency Resp. (−3 dB gain): 250 Hz (220) | Frequency Resp. (−90° phase): 260 Hz (220) | Spool Rated Stroke: ±0.75 mm | Mass: 5.2 kg | Mounting Bolts: M8×65L ×4 (30.8–37.7 N·m); 1006 type M6×60L ×4 (13.0–16.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-03EH-60-D | LSVG-03EH OBE Direct Servo Valve, 60 L/min, input D | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 60 L/min | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Max Operating Pressure: 35 (31.5 for 1006/M6-bolt type) MPa | Tank Port Pressure: 35 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Step Response (0↔100%): 4 ms (4.5) | Frequency Resp. (−3 dB gain): 250 Hz (220) | Frequency Resp. (−90° phase): 260 Hz (220) | Spool Rated Stroke: ±0.75 mm | Mass: 5.2 kg | Mounting Bolts: M8×65L ×4 (30.8–37.7 N·m); 1006 type M6×60L ×4 (13.0–16.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-03EH-60-E | LSVG-03EH OBE Direct Servo Valve, 60 L/min, input E | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 60 L/min | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA input → PABT flow) | Max Operating Pressure: 35 (31.5 for 1006/M6-bolt type) MPa | Tank Port Pressure: 35 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Step Response (0↔100%): 4 ms (4.5) | Frequency Resp. (−3 dB gain): 250 Hz (220) | Frequency Resp. (−90° phase): 260 Hz (220) | Spool Rated Stroke: ±0.75 mm | Mass: 5.2 kg | Mounting Bolts: M8×65L ×4 (30.8–37.7 N·m); 1006 type M6×60L ×4 (13.0–16.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 | |
| LSVG-03EH-60-F | LSVG-03EH OBE Direct Servo Valve, 60 L/min, input F | YUKEN | Type: Direct (single-stage), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 60 L/min | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Max Operating Pressure: 35 (31.5 for 1006/M6-bolt type) MPa | Tank Port Pressure: 35 (7) MPa | Internal Leakage (Ps=14MPa, 32mm²/s): 1.7 L/min max | Step Response (0↔100%): 4 ms (4.5) | Frequency Resp. (−3 dB gain): 250 Hz (220) | Frequency Resp. (−90° phase): 260 Hz (220) | Spool Rated Stroke: ±0.75 mm | Mass: 5.2 kg | Mounting Bolts: M8×65L ×4 (30.8–37.7 N·m); 1006 type M6×60L ×4 (13.0–16.0 N·m) | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple), ≥100 VA | Safety Device (select): A=PABT-open / B=PBAT-open / C=neutral | Drain Port Y (select): Std=Y-port (dry, 0.05 MPa max) / W=no Y-port (wet; not for water-glycol) | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Linear Motor: 1.5 A (3.2 A max), coil 7 Ω | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-22/I-23 |
![[YUKEN] — LSVHG-03EH-210 Two-Stage OBE Linear Servo Valve (210 L/min)](https://img.prosourcemro.com/2026/05/002-153-300x250.png)
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 210 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 210 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-03EH-210-4J-A | LSVHG-03EH-210 2-Stage OBE Servo Valve, spool 4J, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 210 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-210-4J-B | LSVHG-03EH-210 2-Stage OBE Servo Valve, spool 4J, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 210 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-210-4J-C | LSVHG-03EH-210 2-Stage OBE Servo Valve, spool 4J, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 210 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-210-4J-D | LSVHG-03EH-210 2-Stage OBE Servo Valve, spool 4J, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 210 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-210-4J-E | LSVHG-03EH-210 2-Stage OBE Servo Valve, spool 4J, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 210 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-210-4J-F | LSVHG-03EH-210 2-Stage OBE Servo Valve, spool 4J, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 210 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 |
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 230 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 230 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-03EH-230-2L-A | LSVHG-03EH-230 2-Stage OBE Servo Valve, spool 2L, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 230 L/min | Spool Type: 2L | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 8 ms (10) | Frequency Resp. (−3 dB gain): 120 Hz (100) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±4 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-230-2L-B | LSVHG-03EH-230 2-Stage OBE Servo Valve, spool 2L, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 230 L/min | Spool Type: 2L | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 8 ms (10) | Frequency Resp. (−3 dB gain): 120 Hz (100) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±4 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-230-2L-C | LSVHG-03EH-230 2-Stage OBE Servo Valve, spool 2L, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 230 L/min | Spool Type: 2L | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 8 ms (10) | Frequency Resp. (−3 dB gain): 120 Hz (100) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±4 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-230-2L-D | LSVHG-03EH-230 2-Stage OBE Servo Valve, spool 2L, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 230 L/min | Spool Type: 2L | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 8 ms (10) | Frequency Resp. (−3 dB gain): 120 Hz (100) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±4 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-230-2L-E | LSVHG-03EH-230 2-Stage OBE Servo Valve, spool 2L, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 230 L/min | Spool Type: 2L | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 8 ms (10) | Frequency Resp. (−3 dB gain): 120 Hz (100) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±4 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-230-2L-F | LSVHG-03EH-230 2-Stage OBE Servo Valve, spool 2L, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 230 L/min | Spool Type: 2L | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 8 ms (10) | Frequency Resp. (−3 dB gain): 120 Hz (100) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±4 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 |
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 270 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 270 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-03EH-270-2-A | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 2, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 2 | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-2-B | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 2, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 2 | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-2-C | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 2, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 2 | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-2-D | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 2, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 2 | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-2-E | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 2, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 2 | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-2-F | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 2, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 2 | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-40-A | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 40, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-40-B | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 40, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-40-C | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 40, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-40-D | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 40, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-40-E | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 40, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-40-F | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 40, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-2P-A | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 2P, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-2P-B | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 2P, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-2P-C | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 2P, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-2P-D | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 2P, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-2P-E | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 2P, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-03EH-270-2P-F | LSVHG-03EH-270 2-Stage OBE Servo Valve, spool 2P, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 03 (ISO 4401-05) | Rated Flow (ΔP=7MPa): 270 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥9 (8) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 7 ms (9) | Frequency Resp. (−3 dB gain): 125 Hz (110) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 |
![[YUKEN] — LSVHG-03EH-S High-Performance Two-Stage OBE Linear Servo Valve (60–160 L/min)](https://img.prosourcemro.com/2026/05/002-154-300x250.png)
High-performance on-board electronic (OBE) two-stage linear servo valve. Based on the standard-type OBE linear servo valve with an added sleeve; spool and sleeve are machined together to ensure a precise 1% overlap, suiting systems that demand higher precision and durability. Hysteresis 0.1% or less; step response from 7 ms. 1% overlap spool (form S), available as 3-way (A-port) or 4-way valve. Rated flow 60/100/160 L/min. DC 24 V supply, command-signal input only, built-in fault-diagnosis indicator. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Note: 3-way version accepts input signals D/E/F only.
High-performance on-board electronic (OBE) two-stage linear servo valve. Based on the standard-type OBE linear servo valve with an added sleeve; spool and sleeve are machined together to ensure a precise 1% overlap, suiting systems that demand higher precision and durability. Hysteresis 0.1% or less; step response from 7 ms. 1% overlap spool (form S), available as 3-way (A-port) or 4-way valve. Rated flow 60/100/160 L/min. DC 24 V supply, command-signal input only, built-in fault-diagnosis indicator. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Note: 3-way version accepts input signals D/E/F only.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-03EH-60-S4-A | LSVHG-03EH-60 High-Perf OBE Servo Valve, S4 (4-way valve), input A | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 60 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 0.6 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-60-S4-B | LSVHG-03EH-60 High-Perf OBE Servo Valve, S4 (4-way valve), input B | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 60 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 0.6 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-60-S4-C | LSVHG-03EH-60 High-Perf OBE Servo Valve, S4 (4-way valve), input C | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 60 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 0.6 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-60-S4-D | LSVHG-03EH-60 High-Perf OBE Servo Valve, S4 (4-way valve), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 60 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 0.6 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-60-S4-E | LSVHG-03EH-60 High-Perf OBE Servo Valve, S4 (4-way valve), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 60 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 0.6 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-60-S4-F | LSVHG-03EH-60 High-Perf OBE Servo Valve, S4 (4-way valve), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 60 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 0.6 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-60-S3-D | LSVHG-03EH-60 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 60 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 0.3 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-60-S3-E | LSVHG-03EH-60 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 60 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 0.3 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-60-S3-F | LSVHG-03EH-60 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 60 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 0.3 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-100-S4-A | LSVHG-03EH-100 High-Perf OBE Servo Valve, S4 (4-way valve), input A | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 100 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 1.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-100-S4-B | LSVHG-03EH-100 High-Perf OBE Servo Valve, S4 (4-way valve), input B | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 100 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 1.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-100-S4-C | LSVHG-03EH-100 High-Perf OBE Servo Valve, S4 (4-way valve), input C | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 100 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 1.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-100-S4-D | LSVHG-03EH-100 High-Perf OBE Servo Valve, S4 (4-way valve), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 100 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 1.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-100-S4-E | LSVHG-03EH-100 High-Perf OBE Servo Valve, S4 (4-way valve), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 100 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 1.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-100-S4-F | LSVHG-03EH-100 High-Perf OBE Servo Valve, S4 (4-way valve), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 100 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 1.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-100-S3-D | LSVHG-03EH-100 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 100 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 0.6 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-100-S3-E | LSVHG-03EH-100 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 100 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 0.6 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-100-S3-F | LSVHG-03EH-100 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 100 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 0.6 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-160-S4-A | LSVHG-03EH-160 High-Perf OBE Servo Valve, S4 (4-way valve), input A | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 160 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 2.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-160-S4-B | LSVHG-03EH-160 High-Perf OBE Servo Valve, S4 (4-way valve), input B | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 160 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 2.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-160-S4-C | LSVHG-03EH-160 High-Perf OBE Servo Valve, S4 (4-way valve), input C | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 160 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 2.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-160-S4-D | LSVHG-03EH-160 High-Perf OBE Servo Valve, S4 (4-way valve), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 160 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 2.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-160-S4-E | LSVHG-03EH-160 High-Perf OBE Servo Valve, S4 (4-way valve), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 160 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 2.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-160-S4-F | LSVHG-03EH-160 High-Perf OBE Servo Valve, S4 (4-way valve), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 160 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 2.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-160-S3-D | LSVHG-03EH-160 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 160 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 1.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-160-S3-E | LSVHG-03EH-160 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 160 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 1.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-03EH-160-S3-F | LSVHG-03EH-160 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 03 (ISO 4401-05) | Rated Flow: 160 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (T): 21 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥4 L/min | Main Valve Internal Leakage: 1.1 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 7 ms (8) | Frequency Resp. (−3 dB gain): 110 Hz (80) | Frequency Resp. (−90° phase): 110 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 1.3 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 8.5 [11] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 |
![[YUKEN] — LSVHG-04-750 Two-Stage High-Speed Linear Servo Valve (750 L/min)](https://img.prosourcemro.com/2026/05/002-150-300x262.png)
Two-stage high-speed linear servo valve in which a direct-type high-speed linear servo valve acts as the pilot stage driving the main spool, achieving a large flow rate of 750 L/min (ΔP=7MPa). Electrical feedback control of both the pilot spool position and the main spool position realizes high precision and high response. Hysteresis 0.1% or less. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Available spool types 2 / 40 / 2P. Requires dedicated AMLS-C2 linear servo amplifier.
Two-stage high-speed linear servo valve in which a direct-type high-speed linear servo valve acts as the pilot stage driving the main spool, achieving a large flow rate of 750 L/min (ΔP=7MPa). Electrical feedback control of both the pilot spool position and the main spool position realizes high precision and high response. Hysteresis 0.1% or less. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Available spool types 2 / 40 / 2P. Requires dedicated AMLS-C2 linear servo amplifier.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-04-750-2-10 | LSVHG-04-750 2-Stage Linear Servo Valve, spool 2, 750 L/min | YUKEN | Type: Two-stage (pilot-operated), linear servo | Valve Size: 04 | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2 (10% overlap) | Max Operating Pressure: 35 MPa | Tank Port Pressure (ext./int. drain): 31.5 / 31.5 MPa | Pilot Supply Pressure: 1.5–35 MPa | Pilot Flow: ≥27 (22) L/min | Drain Port DR Back Pressure: 0.05 MPa max | Main Valve Internal Leakage: 0.8 L/min (14MPa, 32mm²/s) | Hysteresis: 0.1% max | Step Response (0↔100%): 8 ms (10) | Frequency Resp. (−3 dB gain): 150 Hz (140) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7.1 cm² | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 12 kg | Mounting Bolts: M6×55L ×2 (12.9–15.9 N·m) + M10×60L ×4 (60.6–74.1 N·m) | Dedicated Amplifier: AMLS-C2-D48/D24 | Pilot / Drain Form: Internal pilot+external drain (std) / E=external pilot / T=internal drain | Cable Port Direction: Top (std) / R / L — select per order | Safety Device: PBAT-open (std) / A=PABT-open | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-10/I-11 | |
| LSVHG-04-750-40-10 | LSVHG-04-750 2-Stage Linear Servo Valve, spool 40, 750 L/min | YUKEN | Type: Two-stage (pilot-operated), linear servo | Valve Size: 04 | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 40 (A,B,T connected at neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure (ext./int. drain): 31.5 / 31.5 MPa | Pilot Supply Pressure: 1.5–35 MPa | Pilot Flow: ≥27 (22) L/min | Drain Port DR Back Pressure: 0.05 MPa max | Main Valve Internal Leakage: 1.6 L/min (14MPa, 32mm²/s) | Hysteresis: 0.1% max | Step Response (0↔100%): 8 ms (10) | Frequency Resp. (−3 dB gain): 150 Hz (140) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7.1 cm² | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 12 kg | Mounting Bolts: M6×55L ×2 (12.9–15.9 N·m) + M10×60L ×4 (60.6–74.1 N·m) | Dedicated Amplifier: AMLS-C2-D48/D24 | Pilot / Drain Form: Internal pilot+external drain (std) / E=external pilot / T=internal drain | Cable Port Direction: Top (std) / R / L — select per order | Safety Device: PBAT-open (std) / A=PABT-open | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-10/I-11 | |
| LSVHG-04-750-2P-10 | LSVHG-04-750 2-Stage Linear Servo Valve, spool 2P, 750 L/min | YUKEN | Type: Two-stage (pilot-operated), linear servo | Valve Size: 04 | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Max Operating Pressure: 35 MPa | Tank Port Pressure (ext./int. drain): 31.5 / 31.5 MPa | Pilot Supply Pressure: 1.5–35 MPa | Pilot Flow: ≥27 (22) L/min | Drain Port DR Back Pressure: 0.05 MPa max | Main Valve Internal Leakage: 6.8 L/min (14MPa, 32mm²/s) | Hysteresis: 0.1% max | Step Response (0↔100%): 8 ms (10) | Frequency Resp. (−3 dB gain): 150 Hz (140) | Frequency Resp. (−90° phase): 110 Hz (100) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7.1 cm² | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 12 kg | Mounting Bolts: M6×55L ×2 (12.9–15.9 N·m) + M10×60L ×4 (60.6–74.1 N·m) | Dedicated Amplifier: AMLS-C2-D48/D24 | Pilot / Drain Form: Internal pilot+external drain (std) / E=external pilot / T=internal drain | Cable Port Direction: Top (std) / R / L — select per order | Safety Device: PBAT-open (std) / A=PABT-open | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-10/I-11 |
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 580 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 580 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-04EH-580-4J-A | LSVHG-04EH-580 2-Stage OBE Servo Valve, spool 4J, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 580 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-580-4J-B | LSVHG-04EH-580 2-Stage OBE Servo Valve, spool 4J, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 580 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-580-4J-C | LSVHG-04EH-580 2-Stage OBE Servo Valve, spool 4J, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 580 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-580-4J-D | LSVHG-04EH-580 2-Stage OBE Servo Valve, spool 4J, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 580 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-580-4J-E | LSVHG-04EH-580 2-Stage OBE Servo Valve, spool 4J, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 580 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-580-4J-F | LSVHG-04EH-580 2-Stage OBE Servo Valve, spool 4J, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 580 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 |
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 750 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 750 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-04EH-750-2-A | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2 | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2-B | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2 | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2-C | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2 | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2-D | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2 | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2-E | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2 | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2-F | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2 | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-40-A | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 40, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-40-B | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 40, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-40-C | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 40, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-40-D | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 40, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-40-E | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 40, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-40-F | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 40, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2P-A | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2P, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2P-B | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2P, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2P-C | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2P, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2P-D | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2P, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2P-E | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2P, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2P-F | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2P, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2L-A | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2L, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2L | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2L-B | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2L, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2L | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2L-C | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2L, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2L | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2L-D | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2L, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2L | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2L-E | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2L, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2L | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-04EH-750-2L-F | LSVHG-04EH-750 2-Stage OBE Servo Valve, spool 2L, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 04 (ISO 4401-07) | Rated Flow (ΔP=7MPa): 750 L/min | Spool Type: 2L | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥20 (17) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 7 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 |
High-performance on-board electronic (OBE) two-stage linear servo valve. Based on the standard-type OBE linear servo valve with an added sleeve; spool and sleeve are machined together to ensure a precise 1% overlap, suiting systems that demand higher precision and durability. Hysteresis 0.1% or less; step response from 7 ms. 1% overlap spool (form S), available as 3-way (A-port) or 4-way valve. Rated flow 100/200/280/450 L/min. DC 24 V supply, command-signal input only, built-in fault-diagnosis indicator. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Note: 3-way version accepts input signals D/E/F only.
High-performance on-board electronic (OBE) two-stage linear servo valve. Based on the standard-type OBE linear servo valve with an added sleeve; spool and sleeve are machined together to ensure a precise 1% overlap, suiting systems that demand higher precision and durability. Hysteresis 0.1% or less; step response from 7 ms. 1% overlap spool (form S), available as 3-way (A-port) or 4-way valve. Rated flow 100/200/280/450 L/min. DC 24 V supply, command-signal input only, built-in fault-diagnosis indicator. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Note: 3-way version accepts input signals D/E/F only.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-04EH-100-S4-A | LSVHG-04EH-100 High-Perf OBE Servo Valve, S4 (4-way valve), input A | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 100 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 0.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-100-S4-B | LSVHG-04EH-100 High-Perf OBE Servo Valve, S4 (4-way valve), input B | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 100 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 0.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-100-S4-C | LSVHG-04EH-100 High-Perf OBE Servo Valve, S4 (4-way valve), input C | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 100 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 0.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-100-S4-D | LSVHG-04EH-100 High-Perf OBE Servo Valve, S4 (4-way valve), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 100 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 0.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-100-S4-E | LSVHG-04EH-100 High-Perf OBE Servo Valve, S4 (4-way valve), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 100 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 0.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-100-S4-F | LSVHG-04EH-100 High-Perf OBE Servo Valve, S4 (4-way valve), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 100 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 0.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-100-S3-D | LSVHG-04EH-100 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 100 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 0.5 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-100-S3-E | LSVHG-04EH-100 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 100 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 0.5 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-100-S3-F | LSVHG-04EH-100 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 100 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 0.5 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-200-S4-A | LSVHG-04EH-200 High-Perf OBE Servo Valve, S4 (4-way valve), input A | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 200 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 1.7 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-200-S4-B | LSVHG-04EH-200 High-Perf OBE Servo Valve, S4 (4-way valve), input B | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 200 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 1.7 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-200-S4-C | LSVHG-04EH-200 High-Perf OBE Servo Valve, S4 (4-way valve), input C | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 200 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 1.7 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-200-S4-D | LSVHG-04EH-200 High-Perf OBE Servo Valve, S4 (4-way valve), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 200 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 1.7 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-200-S4-E | LSVHG-04EH-200 High-Perf OBE Servo Valve, S4 (4-way valve), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 200 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 1.7 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-200-S4-F | LSVHG-04EH-200 High-Perf OBE Servo Valve, S4 (4-way valve), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 200 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 1.7 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-200-S3-D | LSVHG-04EH-200 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 200 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 0.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-200-S3-E | LSVHG-04EH-200 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 200 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 0.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-200-S3-F | LSVHG-04EH-200 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 200 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 0.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-280-S4-A | LSVHG-04EH-280 High-Perf OBE Servo Valve, S4 (4-way valve), input A | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 280 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 2.5 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-280-S4-B | LSVHG-04EH-280 High-Perf OBE Servo Valve, S4 (4-way valve), input B | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 280 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 2.5 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-280-S4-C | LSVHG-04EH-280 High-Perf OBE Servo Valve, S4 (4-way valve), input C | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 280 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 2.5 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-280-S4-D | LSVHG-04EH-280 High-Perf OBE Servo Valve, S4 (4-way valve), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 280 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 2.5 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-280-S4-E | LSVHG-04EH-280 High-Perf OBE Servo Valve, S4 (4-way valve), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 280 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 2.5 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-280-S4-F | LSVHG-04EH-280 High-Perf OBE Servo Valve, S4 (4-way valve), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 280 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 2.5 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-280-S3-D | LSVHG-04EH-280 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 280 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 1.3 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-280-S3-E | LSVHG-04EH-280 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 280 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 1.3 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-280-S3-F | LSVHG-04EH-280 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 280 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 1.3 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-450-S4-A | LSVHG-04EH-450 High-Perf OBE Servo Valve, S4 (4-way valve), input A | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 450 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 5.0 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-450-S4-B | LSVHG-04EH-450 High-Perf OBE Servo Valve, S4 (4-way valve), input B | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 450 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 5.0 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-450-S4-C | LSVHG-04EH-450 High-Perf OBE Servo Valve, S4 (4-way valve), input C | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 450 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 5.0 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-450-S4-D | LSVHG-04EH-450 High-Perf OBE Servo Valve, S4 (4-way valve), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 450 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 5.0 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-450-S4-E | LSVHG-04EH-450 High-Perf OBE Servo Valve, S4 (4-way valve), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 450 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 5.0 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-450-S4-F | LSVHG-04EH-450 High-Perf OBE Servo Valve, S4 (4-way valve), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 450 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 5.0 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-450-S3-D | LSVHG-04EH-450 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 450 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 2.5 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-450-S3-E | LSVHG-04EH-450 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 450 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 2.5 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-04EH-450-S3-F | LSVHG-04EH-450 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 04 (ISO 4401-07) | Rated Flow: 450 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 31.5 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥6 L/min | Main Valve Internal Leakage: 2.5 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 11 ms (12) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 100 Hz (90) | Main Spool Rated Stroke: ±3.5 mm | Main Spool Pressure Area: 3.1 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 14 [16] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 |
Two-stage high-speed linear servo valve in which a direct-type high-speed linear servo valve acts as the pilot stage driving the main spool, achieving a large flow rate of 1300 L/min (ΔP=7MPa). Electrical feedback control of both the pilot spool position and the main spool position realizes high precision and high response. Hysteresis 0.1% or less. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Available spool types 2 / 40 / 2P. Requires dedicated AMLS-D linear servo amplifier.
Two-stage high-speed linear servo valve in which a direct-type high-speed linear servo valve acts as the pilot stage driving the main spool, achieving a large flow rate of 1300 L/min (ΔP=7MPa). Electrical feedback control of both the pilot spool position and the main spool position realizes high precision and high response. Hysteresis 0.1% or less. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Available spool types 2 / 40 / 2P. Requires dedicated AMLS-D linear servo amplifier.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-06-1300-2-10 | LSVHG-06-1300 2-Stage Linear Servo Valve, spool 2, 1300 L/min | YUKEN | Type: Two-stage (pilot-operated), linear servo | Valve Size: 06 | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2 (10% overlap) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (ext./int. drain): 25 / 25 MPa | Pilot Supply Pressure: 1.5–35 MPa | Pilot Flow: ≥34 (27) L/min | Drain Port DR Back Pressure: 0.05 MPa max | Main Valve Internal Leakage: 1 L/min (14MPa, 32mm²/s) | Hysteresis: 0.1% max | Step Response (0↔100%): 10 ms (13) | Frequency Resp. (−3 dB gain): 150 Hz (110) | Frequency Resp. (−90° phase): 100 Hz (100) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 21 kg | Mounting Bolts: M12×85L ×6 (104–127 N·m) | Dedicated Amplifier: AMLS-D-D48/D24 | Pilot / Drain Form: Internal pilot+external drain (std) / E=external pilot / T=internal drain | Cable Port Direction: Top (std) / R / L — select per order | Safety Device: PBAT-open (std) / A=PABT-open | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-10/I-11 | |
| LSVHG-06-1300-40-10 | LSVHG-06-1300 2-Stage Linear Servo Valve, spool 40, 1300 L/min | YUKEN | Type: Two-stage (pilot-operated), linear servo | Valve Size: 06 | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 40 (A,B,T connected at neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (ext./int. drain): 25 / 25 MPa | Pilot Supply Pressure: 1.5–35 MPa | Pilot Flow: ≥34 (27) L/min | Drain Port DR Back Pressure: 0.05 MPa max | Main Valve Internal Leakage: 2 L/min (14MPa, 32mm²/s) | Hysteresis: 0.1% max | Step Response (0↔100%): 10 ms (13) | Frequency Resp. (−3 dB gain): 150 Hz (110) | Frequency Resp. (−90° phase): 100 Hz (100) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 21 kg | Mounting Bolts: M12×85L ×6 (104–127 N·m) | Dedicated Amplifier: AMLS-D-D48/D24 | Pilot / Drain Form: Internal pilot+external drain (std) / E=external pilot / T=internal drain | Cable Port Direction: Top (std) / R / L — select per order | Safety Device: PBAT-open (std) / A=PABT-open | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-10/I-11 | |
| LSVHG-06-1300-2P-10 | LSVHG-06-1300 2-Stage Linear Servo Valve, spool 2P, 1300 L/min | YUKEN | Type: Two-stage (pilot-operated), linear servo | Valve Size: 06 | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure (ext./int. drain): 25 / 25 MPa | Pilot Supply Pressure: 1.5–35 MPa | Pilot Flow: ≥34 (27) L/min | Drain Port DR Back Pressure: 0.05 MPa max | Main Valve Internal Leakage: 8 L/min (14MPa, 32mm²/s) | Hysteresis: 0.1% max | Step Response (0↔100%): 10 ms (13) | Frequency Resp. (−3 dB gain): 150 Hz (110) | Frequency Resp. (−90° phase): 100 Hz (100) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 21 kg | Mounting Bolts: M12×85L ×6 (104–127 N·m) | Dedicated Amplifier: AMLS-D-D48/D24 | Pilot / Drain Form: Internal pilot+external drain (std) / E=external pilot / T=internal drain | Cable Port Direction: Top (std) / R / L — select per order | Safety Device: PBAT-open (std) / A=PABT-open | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-10/I-11 |
Two-stage high-speed linear servo valve in which a direct-type high-speed linear servo valve acts as the pilot stage driving the main spool, achieving a large flow rate of 900 L/min (ΔP=7MPa). Electrical feedback control of both the pilot spool position and the main spool position realizes high precision and high response. Hysteresis 0.1% or less. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Available spool types 2 / 40 / 2P. Requires dedicated AMLS-C linear servo amplifier.
Two-stage high-speed linear servo valve in which a direct-type high-speed linear servo valve acts as the pilot stage driving the main spool, achieving a large flow rate of 900 L/min (ΔP=7MPa). Electrical feedback control of both the pilot spool position and the main spool position realizes high precision and high response. Hysteresis 0.1% or less. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Available spool types 2 / 40 / 2P. Requires dedicated AMLS-C linear servo amplifier.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-06-900-2-10 | LSVHG-06-900 2-Stage Linear Servo Valve, spool 2, 900 L/min | YUKEN | Type: Two-stage (pilot-operated), linear servo | Valve Size: 06 | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2 (10% overlap) | Max Operating Pressure: 35 MPa | Tank Port Pressure (ext./int. drain): 35 / 35 MPa | Pilot Supply Pressure: 1.5–35 MPa | Pilot Flow: ≥30 (24) L/min | Drain Port DR Back Pressure: 0.05 MPa max | Main Valve Internal Leakage: 0.9 L/min (14MPa, 32mm²/s) | Hysteresis: 0.1% max | Step Response (0↔100%): 8 ms (10) | Frequency Resp. (−3 dB gain): 160 Hz (130) | Frequency Resp. (−90° phase): 105 Hz (100) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 20 kg | Mounting Bolts: M12×85L ×6 (104–127 N·m) | Dedicated Amplifier: AMLS-C-D48/D24 | Pilot / Drain Form: Internal pilot+external drain (std) / E=external pilot / T=internal drain | Cable Port Direction: Top (std) / R / L — select per order | Safety Device: PBAT-open (std) / A=PABT-open | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-10/I-11 | |
| LSVHG-06-900-40-10 | LSVHG-06-900 2-Stage Linear Servo Valve, spool 40, 900 L/min | YUKEN | Type: Two-stage (pilot-operated), linear servo | Valve Size: 06 | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 40 (A,B,T connected at neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure (ext./int. drain): 35 / 35 MPa | Pilot Supply Pressure: 1.5–35 MPa | Pilot Flow: ≥30 (24) L/min | Drain Port DR Back Pressure: 0.05 MPa max | Main Valve Internal Leakage: 1.8 L/min (14MPa, 32mm²/s) | Hysteresis: 0.1% max | Step Response (0↔100%): 8 ms (10) | Frequency Resp. (−3 dB gain): 160 Hz (130) | Frequency Resp. (−90° phase): 105 Hz (100) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 20 kg | Mounting Bolts: M12×85L ×6 (104–127 N·m) | Dedicated Amplifier: AMLS-C-D48/D24 | Pilot / Drain Form: Internal pilot+external drain (std) / E=external pilot / T=internal drain | Cable Port Direction: Top (std) / R / L — select per order | Safety Device: PBAT-open (std) / A=PABT-open | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-10/I-11 | |
| LSVHG-06-900-2P-10 | LSVHG-06-900 2-Stage Linear Servo Valve, spool 2P, 900 L/min | YUKEN | Type: Two-stage (pilot-operated), linear servo | Valve Size: 06 | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Max Operating Pressure: 35 MPa | Tank Port Pressure (ext./int. drain): 35 / 35 MPa | Pilot Supply Pressure: 1.5–35 MPa | Pilot Flow: ≥30 (24) L/min | Drain Port DR Back Pressure: 0.05 MPa max | Main Valve Internal Leakage: 7 L/min (14MPa, 32mm²/s) | Hysteresis: 0.1% max | Step Response (0↔100%): 8 ms (10) | Frequency Resp. (−3 dB gain): 160 Hz (130) | Frequency Resp. (−90° phase): 105 Hz (100) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 20 kg | Mounting Bolts: M12×85L ×6 (104–127 N·m) | Dedicated Amplifier: AMLS-C-D48/D24 | Pilot / Drain Form: Internal pilot+external drain (std) / E=external pilot / T=internal drain | Cable Port Direction: Top (std) / R / L — select per order | Safety Device: PBAT-open (std) / A=PABT-open | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-10/I-11 |
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 1300 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 1300 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-06EH-1300-2-A | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2 | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2-B | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2 | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2-C | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2 | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2-D | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2 | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2-E | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2 | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2-F | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2 | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-40-A | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 40, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-40-B | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 40, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-40-C | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 40, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-40-D | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 40, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-40-E | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 40, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-40-F | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 40, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2P-A | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2P, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2P-B | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2P, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2P-C | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2P, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2P-D | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2P, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2P-E | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2P, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2P-F | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2P, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2L-A | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2L, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2L | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2L-B | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2L, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2L | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2L-C | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2L, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2L | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2L-D | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2L, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2L | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2L-E | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2L, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2L | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-2L-F | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 2L, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 2L | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 75 Hz (70) | Frequency Resp. (−90° phase): 70 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-4J-A | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 4J, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-4J-B | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 4J, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-4J-C | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 4J, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-4J-D | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 4J, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-4J-E | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 4J, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-1300-4J-F | LSVHG-06EH-1300 2-Stage OBE Servo Valve, spool 4J, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 1300 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 |
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 820 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 820 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-06EH-820-4J-A | LSVHG-06EH-820 2-Stage OBE Servo Valve, spool 4J, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 820 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-820-4J-B | LSVHG-06EH-820 2-Stage OBE Servo Valve, spool 4J, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 820 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-820-4J-C | LSVHG-06EH-820 2-Stage OBE Servo Valve, spool 4J, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 820 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-820-4J-D | LSVHG-06EH-820 2-Stage OBE Servo Valve, spool 4J, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 820 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-820-4J-E | LSVHG-06EH-820 2-Stage OBE Servo Valve, spool 4J, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 820 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-820-4J-F | LSVHG-06EH-820 2-Stage OBE Servo Valve, spool 4J, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 820 L/min | Spool Type: 4J (A,B,T connected, neutral; +100% input: A/B/C→P→A, D/E/F→P→B) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): input A/B/C → A (PABT full-open); input D/E/F → blank (PBAT full-open) or EC (solenoid, neutral) | Max Operating Pressure: 31.5 MPa | Tank Port Pressure: 25 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥23 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | 4J Characteristic: see characteristic curves (I-44/46/48) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 |
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 900 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
On-board electronic (OBE) two-stage linear servo valve, based on the two-stage high-speed linear servo valve with a miniaturized pilot stage and a compact integrated dedicated amplifier, realizing 'high precision, simple, convenient'. Rated flow 900 L/min. Hysteresis 0.1% or less. DC 24 V supply with command-signal input only; built-in fault-diagnosis indicator. Dry and wet pilot types selectable. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Input-signal versions ±10 V / 4–20 mA / ±10 mA with spool monitor.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-06EH-900-2-A | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2 | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2-B | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2 | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2-C | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2 | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2-D | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2 | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2-E | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2 | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2-F | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2 | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): EC (solenoid valve attached, neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-40-A | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 40, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-40-B | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 40, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-40-C | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 40, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-40-D | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 40, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-40-E | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 40, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-40-F | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 40, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 40 (A,B,T connected at neutral) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2P-A | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2P, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2P-B | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2P, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2P-C | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2P, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2P-D | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2P, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2P-E | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2P, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2P-F | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2P, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): blank=PBAT full-open / A=PABT full-open (no solenoid) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2L-A | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2L, input A | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2L | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2L-B | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2L, input B | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2L | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2L-C | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2L, input C | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2L | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2L-D | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2L, input D | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2L | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2L-E | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2L, input E | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2L | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 | |
| LSVHG-06EH-900-2L-F | LSVHG-06EH-900 2-Stage OBE Servo Valve, spool 2L, input F | YUKEN | Type: Two-stage (pilot-operated), on-board electronic (OBE) amp-mounted | Valve Frame: 06 (ISO 4401-08) | Rated Flow (ΔP=7MPa): 900 L/min | Spool Type: 2L | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (per spool): EA (solenoid, PBAT 10% open) / EB (solenoid, PABT 10% open) | Max Operating Pressure: 35 MPa | Tank Port Pressure: 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥22 (19) L/min | Drain Port DR Back Pressure: 0.05 MPa max (W type: no DR port, wet) | Step Response (0↔100%): 11 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (90) | Frequency Resp. (−90° phase): 90 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V (DC 21.6–26.4 V incl. ripple) | Linear Motor: 2.1 A max, coil 9.6 Ω | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain | Connector (select): 1=6+PE / 2=11+PE (Enable, valve-ready, alarm output) | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-31/I-32/I-33 |
High-performance on-board electronic (OBE) two-stage linear servo valve. Based on the standard-type OBE linear servo valve with an added sleeve; spool and sleeve are machined together to ensure a precise 1% overlap, suiting systems that demand higher precision and durability. Hysteresis 0.1% or less; step response from 7 ms. 1% overlap spool (form S), available as 3-way (A-port) or 4-way valve. Rated flow 500/900 L/min. DC 24 V supply, command-signal input only, built-in fault-diagnosis indicator. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Note: 3-way version accepts input signals D/E/F only.
High-performance on-board electronic (OBE) two-stage linear servo valve. Based on the standard-type OBE linear servo valve with an added sleeve; spool and sleeve are machined together to ensure a precise 1% overlap, suiting systems that demand higher precision and durability. Hysteresis 0.1% or less; step response from 7 ms. 1% overlap spool (form S), available as 3-way (A-port) or 4-way valve. Rated flow 500/900 L/min. DC 24 V supply, command-signal input only, built-in fault-diagnosis indicator. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Note: 3-way version accepts input signals D/E/F only.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-06EH-500-S4-A | LSVHG-06EH-500 High-Perf OBE Servo Valve, S4 (4-way valve), input A | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 500 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 1.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-500-S4-B | LSVHG-06EH-500 High-Perf OBE Servo Valve, S4 (4-way valve), input B | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 500 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 1.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-500-S4-C | LSVHG-06EH-500 High-Perf OBE Servo Valve, S4 (4-way valve), input C | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 500 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 1.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-500-S4-D | LSVHG-06EH-500 High-Perf OBE Servo Valve, S4 (4-way valve), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 500 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 1.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-500-S4-E | LSVHG-06EH-500 High-Perf OBE Servo Valve, S4 (4-way valve), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 500 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 1.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-500-S4-F | LSVHG-06EH-500 High-Perf OBE Servo Valve, S4 (4-way valve), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 500 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 1.9 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-500-S3-D | LSVHG-06EH-500 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 500 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 1.0 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-500-S3-E | LSVHG-06EH-500 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 500 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 1.0 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-500-S3-F | LSVHG-06EH-500 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 500 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 1.0 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-900-S4-A | LSVHG-06EH-900 High-Perf OBE Servo Valve, S4 (4-way valve), input A | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 900 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: A: Voltage ±10 V (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 4.8 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-900-S4-B | LSVHG-06EH-900 High-Perf OBE Servo Valve, S4 (4-way valve), input B | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 900 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: B: Current 4–20 mA (12–20 mA → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 4.8 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-900-S4-C | LSVHG-06EH-900 High-Perf OBE Servo Valve, S4 (4-way valve), input C | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 900 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: C: Current ±10 mA (+input → PBAT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 4.8 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-900-S4-D | LSVHG-06EH-900 High-Perf OBE Servo Valve, S4 (4-way valve), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 900 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 4.8 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-900-S4-E | LSVHG-06EH-900 High-Perf OBE Servo Valve, S4 (4-way valve), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 900 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 4.8 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-900-S4-F | LSVHG-06EH-900 High-Perf OBE Servo Valve, S4 (4-way valve), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 900 L/min (ΔP=7MPa) | Spool / Control: S (1% overlap) / 4-way valve | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open / A=PABT full-open / EA=sol PBAT 10% / EB=sol PABT 10% | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 4.8 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-900-S3-D | LSVHG-06EH-900 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input D | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 900 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: D: Voltage ±10 V (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 2.4 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-900-S3-E | LSVHG-06EH-900 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input E | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 900 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: E: Current 4–20 mA (12–20 mA → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 2.4 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 | |
| LSVHG-06EH-900-S3-F | LSVHG-06EH-900 High-Perf OBE Servo Valve, S3 (3-way valve (A-port, ΔP=3.5MPa rating)), input F | YUKEN | Type: Two-stage (pilot-operated) OBE, high-performance (sleeve-type, 1% overlap) | Valve Frame: 06 (ISO 4401-08) | Rated Flow: 900 L/min (ΔP=3.5MPa) | Spool / Control: S (1% overlap) / 3-way valve (A-port, ΔP=3.5MPa rating) | Input Signal / Spool Monitor: F: Current ±10 mA (+input → PABT flow) | Safety Device (select): blank=PBAT full-open (no solenoid) / EB=sol PABT 10% [★ 3-way: input D/E/F only] | Max Operating Pressure: 35 MPa | Tank Port Pressure (T): 35 MPa | Pilot Supply Pressure: 1.5–21 MPa | Pilot Flow: ≥21 L/min | Main Valve Internal Leakage: 2.4 L/min (14MPa, 32mm²/s) | Step Response (0↔100%): 12 ms (13) | Frequency Resp. (−3 dB gain): 100 Hz (80) | Frequency Resp. (−90° phase): 95 Hz (90) | Main Spool Rated Stroke: ±5 mm | Main Spool Pressure Area: 8 cm² | Built-in Amplifier: On-board (OBE), DC 24 V | Pilot / Drain Form: Internal pilot+ext drain (std) / E=ext pilot / T=int drain / W=no DR port (wet) | Connector (select): 1=6+PE / 2=11+PE | Hysteresis: 0.1% max | Protection: IP65 | Ambient Temp: 0 to +50 °C | Mass: 20 [24] kg ([ ] = with safety solenoid valve) | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals); W type not for water-glycol | Source: Yuken Cat. I-Edit0, I-52/I-53 |
Two-stage high-speed linear servo valve in which a direct-type high-speed linear servo valve acts as the pilot stage driving the main spool, achieving a large flow rate of 3800 L/min (ΔP=7MPa). Electrical feedback control of both the pilot spool position and the main spool position realizes high precision and high response. Hysteresis 0.1% or less. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Available spool types 2 / 40 / 2P. Requires dedicated AMLS-D linear servo amplifier.
Two-stage high-speed linear servo valve in which a direct-type high-speed linear servo valve acts as the pilot stage driving the main spool, achieving a large flow rate of 3800 L/min (ΔP=7MPa). Electrical feedback control of both the pilot spool position and the main spool position realizes high precision and high response. Hysteresis 0.1% or less. Usable to NAS 1638 class 10 (ISO4406 21/19/15). Available spool types 2 / 40 / 2P. Requires dedicated AMLS-D linear servo amplifier.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LSVHG-10-3800-2-20 | LSVHG-10-3800 2-Stage Linear Servo Valve, spool 2, 3800 L/min | YUKEN | Type: Two-stage (pilot-operated), linear servo | Valve Size: 10 | Rated Flow (ΔP=7MPa): 3800 L/min | Spool Type: 2 (10% overlap) | Max Operating Pressure: 35 MPa | Tank Port Pressure (ext./int. drain): 28 / 28 MPa | Pilot Supply Pressure: 1.5–25 MPa | Pilot Flow: ≥32 (27) L/min | Drain Port DR Back Pressure: 0.05 MPa max | Main Valve Internal Leakage: 3 L/min (14MPa, 32mm²/s) | Hysteresis: 0.1% max | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 100 Hz (60) | Frequency Resp. (−90° phase): 85 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 11.3 cm² | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 78 kg | Mounting Bolts: M20×90L ×6 (494–603 N·m) | Dedicated Amplifier: AMLS-D-D48/D24 | Pilot / Drain Form: Internal pilot+external drain (std) / E=external pilot / T=internal drain | Cable Port Direction: Top (std) / R / L — select per order | Safety Device: PBAT-open (std) / A=PABT-open | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-10/I-11 | |
| LSVHG-10-3800-40-20 | LSVHG-10-3800 2-Stage Linear Servo Valve, spool 40, 3800 L/min | YUKEN | Type: Two-stage (pilot-operated), linear servo | Valve Size: 10 | Rated Flow (ΔP=7MPa): 3800 L/min | Spool Type: 40 (A,B,T connected at neutral) | Max Operating Pressure: 35 MPa | Tank Port Pressure (ext./int. drain): 28 / 28 MPa | Pilot Supply Pressure: 1.5–25 MPa | Pilot Flow: ≥32 (27) L/min | Drain Port DR Back Pressure: 0.05 MPa max | Main Valve Internal Leakage: 6 L/min (14MPa, 32mm²/s) | Hysteresis: 0.1% max | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 100 Hz (60) | Frequency Resp. (−90° phase): 85 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 11.3 cm² | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 78 kg | Mounting Bolts: M20×90L ×6 (494–603 N·m) | Dedicated Amplifier: AMLS-D-D48/D24 | Pilot / Drain Form: Internal pilot+external drain (std) / E=external pilot / T=internal drain | Cable Port Direction: Top (std) / R / L — select per order | Safety Device: PBAT-open (std) / A=PABT-open | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-10/I-11 | |
| LSVHG-10-3800-2P-20 | LSVHG-10-3800 2-Stage Linear Servo Valve, spool 2P, 3800 L/min | YUKEN | Type: Two-stage (pilot-operated), linear servo | Valve Size: 10 | Rated Flow (ΔP=7MPa): 3800 L/min | Spool Type: 2P (zero-lap, dual flow gain) | Max Operating Pressure: 35 MPa | Tank Port Pressure (ext./int. drain): 28 / 28 MPa | Pilot Supply Pressure: 1.5–25 MPa | Pilot Flow: ≥32 (27) L/min | Drain Port DR Back Pressure: 0.05 MPa max | Main Valve Internal Leakage: 10 L/min (14MPa, 32mm²/s) | Hysteresis: 0.1% max | Step Response (0↔100%): 15 ms (18) | Frequency Resp. (−3 dB gain): 100 Hz (60) | Frequency Resp. (−90° phase): 85 Hz (75) | Main Spool Rated Stroke: ±7 mm | Main Spool Pressure Area: 11.3 cm² | Linear Motor: 2 A (6 A max), coil 4.5 Ω @20°C | Protection: IP64 | Ambient Temp: −15 to +60 °C | Mass: 78 kg | Mounting Bolts: M20×90L ×6 (494–603 N·m) | Dedicated Amplifier: AMLS-D-D48/D24 | Pilot / Drain Form: Internal pilot+external drain (std) / E=external pilot / T=internal drain | Cable Port Direction: Top (std) / R / L — select per order | Safety Device: PBAT-open (std) / A=PABT-open | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-10/I-11 |
Mechanical servo valve developed by Yuken for control of machine tools, welding equipment, and similar machinery. Built on high machining precision to enable high-accuracy operation. Valve sizes 4 / 10 / 20 / 40 (rated flow). Max pressure 7 MPa. External-drain, internal-drain, and external-pilot configurations available. Order designation by RFQ / consultation.
Mechanical servo valve developed by Yuken for control of machine tools, welding equipment, and similar machinery. Built on high machining precision to enable high-accuracy operation. Valve sizes 4 / 10 / 20 / 40 (rated flow). Max pressure 7 MPa. External-drain, internal-drain, and external-pilot configurations available. Order designation by RFQ / consultation.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| SVC-F1-4 | SVC-F1 Mechanical Servo Valve, 4 L/min (RFQ) | YUKEN | Type: Mechanical servo valve | Rated Flow: 4 L/min | Max Operating Pressure: 7 MPa | Drain / Pilot: External-drain / internal-drain / external-pilot configurations | Application: Machine tools, welding equipment, high-precision control | Ordering: Exact order designation by RFQ / consultation | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-62 | |
| SVC-F1-10 | SVC-F1 Mechanical Servo Valve, 10 L/min (RFQ) | YUKEN | Type: Mechanical servo valve | Rated Flow: 10 L/min | Max Operating Pressure: 7 MPa | Drain / Pilot: External-drain / internal-drain / external-pilot configurations | Application: Machine tools, welding equipment, high-precision control | Ordering: Exact order designation by RFQ / consultation | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-62 | |
| SVC-F1-20 | SVC-F1 Mechanical Servo Valve, 20 L/min (RFQ) | YUKEN | Type: Mechanical servo valve | Rated Flow: 20 L/min | Max Operating Pressure: 7 MPa | Drain / Pilot: External-drain / internal-drain / external-pilot configurations | Application: Machine tools, welding equipment, high-precision control | Ordering: Exact order designation by RFQ / consultation | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-62 | |
| SVC-F1-40 | SVC-F1 Mechanical Servo Valve, 40 L/min (RFQ) | YUKEN | Type: Mechanical servo valve | Rated Flow: 40 L/min | Max Operating Pressure: 7 MPa | Drain / Pilot: External-drain / internal-drain / external-pilot configurations | Application: Machine tools, welding equipment, high-precision control | Ordering: Exact order designation by RFQ / consultation | Fluid: Mineral oil (std) / Phosphate-ester (F prefix, fluoro seals) | Source: Yuken Cat. I-Edit0, I-62 |