Hand Tools

NT SL-700GP Safety Cutter Knife is a retractable-blade cutting tool designed for controlled, reduced-injury cutting tasks, sourced direct from Korea. Safety cutters of this type are widely used in warehouse, packaging, and logistics environments where workers need to open cartons, cut strapping, or slice film without the exposed-blade hazards of conventional utility knives. Request a quote today for export-ready supply, competitive Korea-direct pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The NT STL-ONE Utility Knife is a snap-off blade cutter designed for clean, controlled cutting tasks, sourced direct from Korea. Utility knives of this type are widely used across packaging, construction, and general workshop environments where precise scoring and trimming of materials like cardboard, vinyl, and thin sheet goods is needed. Request a quote today for export-ready supply of NT cutting tools at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The NT SW-600GP is a design utility knife built for precise, controlled cutting tasks, sourced direct from Korea. Utility knives of this type are commonly used by designers, architects, and hobbyists for clean scoring, trimming, and detail cutting across paper, film, cardboard, and similar materials. Request a quote today to access export-ready supply of this professional cutting tool at competitive pricing through a KITA-registered Korean exporter.

The NT VS-1P Multi-Purpose Knife is a versatile cutting tool designed for clean, controlled slicing across a range of materials, sourced direct from Korea. Utility knives in this category are commonly used in packaging, warehousing, and light fabrication environments where a reliable handheld cutter is an everyday necessity. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The OH AH-10 Aluminum Hammer is a lightweight striking tool designed for applications where minimizing weight and reducing surface marring are priorities, sourced direct from Korea. Aluminum hammers are commonly used in automotive assembly, aerospace maintenance, and general fabrication work where a softer strike is needed to avoid damaging sensitive components or finished surfaces. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The OH AH-11G Anchor Hammer is a specialty striking tool designed for driving and setting anchors in masonry and concrete applications, sourced direct from Korea. Anchor hammers of this type are commonly used by construction crews and contractors when installing fasteners, wedge anchors, or sleeve anchors into hard substrate materials. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The OH ASB-06S Scaffold Hammer is a purpose-built striking tool designed for scaffold assembly and disassembly work, sourced direct from Korea. Scaffold hammers of this type are commonly used by construction crews and scaffolding contractors to drive and remove wedge pins, couplers, and locking bolts at height, where a combined hammer-and-hook head design improves efficiency and safety. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The OH CBB-750 Barracuda Pry Bar is a heavy-duty hand tool designed for prying, lifting, and demolition tasks, sourced direct from Korea. Pry bars of this type are commonly used by construction crews, maintenance technicians, and industrial workers to remove fasteners, separate assemblies, or shift heavy materials with controlled leverage. Request a quote today for export-ready supply of the CBB-750 at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The OH CBH-450 Pry Bar Level is a hand tool combining prying and leveling functions in a single unit, sourced direct from Korea. Pry bar levels are commonly used in construction and renovation work where tradespeople need to align, lift, or shift materials while checking for true horizontal or vertical positioning. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The OH CBK-1500 Steel Pry Bar is a heavy-duty hand tool designed for prying, lifting, and demolition work, sourced direct from Korea. Pry bars of this type are commonly used by construction crews, maintenance technicians, and industrial workers to remove nails, separate bonded materials, and shift heavy components in tight spaces. Request a quote today for export-ready supply of the OH CBK-1500 at competitive pricing through a KITA-registered Korean exporter.

OH CH-05 Combination Hammer is a versatile striking tool designed for driving, shaping, and demolition tasks, sourced direct from Korea. Combination hammers are commonly used across construction, metalworking, and general maintenance where a single tool needs to handle both soft and hard-face striking applications. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

OH CH-10LT Claw Hammer with a polypropylene handle delivers reliable striking and nail-pulling performance, sourced direct from Korea. Claw hammers are a staple on construction sites, carpentry workshops, and general maintenance operations where driving and removing nails is an everyday task. Request a quote today for export-ready supply, competitive pricing, and dependable fulfillment through a KITA-registered Korean exporter.

The OH CIS-06 Sledgehammer with a steel handle delivers high-impact striking force for heavy-duty demolition and driving tasks, sourced direct from Korea. Sledgehammers of this type are commonly used in construction, mining, and industrial settings to break up concrete, drive stakes, or dislodge heavy components where significant force is required. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

OH CO-05 Copper Hammer is a non-sparking striking tool designed to deliver controlled force without damaging sensitive surfaces or creating ignition risks, sourced direct from Korea. Copper hammers are commonly used in petrochemical, oil and gas, and heavy industrial environments where spark-free operation is critical, as well as for seating precision components without marring finished metal. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The OH CO-30G Copper Mallet with fiber handle delivers controlled, non-sparking strikes for assembly and maintenance work, sourced direct from Korea. Copper mallets are commonly used in environments where avoiding damage to finished surfaces or preventing spark ignition near flammable materials is critical, making them a go-to choice for petrochemical, marine, and precision manufacturing facilities. Request a quote today to access export-ready supply of this and other OH hand tools through a KITA-registered Korean exporter offering competitive international pricing.

The OH CUS-05G Urethane Combo Hammer with fiberglass handle is a dual-face striking tool designed for applications requiring both a soft urethane face and a harder striking surface, sourced direct from Korea. Combo hammers of this type are commonly used in assembly, fabrication, and forming work where operators need to drive or seat components without damaging finished surfaces or delicate workpieces. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The OH CUS-05GH is a urethane replacement hammer head designed to deliver non-marring strikes on finished surfaces, sourced direct from Korea. Urethane hammer heads are commonly used in assembly, fabrication, and woodworking applications where protecting workpiece surfaces from damage is a priority. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The OH EZ-05G Combination Nail Ball Hammer is a dual-purpose striking tool designed for both nail driving and ball-peen work, sourced direct from Korea. Combination hammers of this type are commonly used by general contractors, maintenance technicians, and fabricators who need versatility on the job site without carrying multiple tools. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

OH FH-05 Copper Hammer is a non-sparking striking tool designed to deliver impact without damaging sensitive surfaces or igniting flammable atmospheres, sourced direct from Korea. Copper hammers like this are commonly used in petrochemical plants, refineries, and maintenance workshops where spark hazards are a concern, as well as for seating or removing parts where steel would cause surface damage. Request a quote today for export-ready supply, competitive ex-works pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The OH FH-10LT Lighton Copper Hammer is a non-sparking striking tool designed for impact work in sensitive environments, sourced direct from Korea. Copper hammers are commonly used in applications where ferrous tools risk igniting flammable materials, such as in petrochemical facilities, refineries, and explosive-handling areas. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.