🔍
Can't find your part? We source far beyond this catalog —
list any MRO part, even if it's not listed here, and we'll quote it direct from Korean makers.
Submit an RFQ →
Linear Bushings
![[THK] — ER Precision Linear Pack Stainless Slide Unit (ER513~ER1025)](https://img.prosourcemro.com/2026/05/001-1017-300x228.png)
ER type Precision Linear Pack — stainless steel precision-formed, heat-treated and ground slide unit. Balls circulate inside inner ball case between outer rail V-grooves for infinite linear motion. Inner block widths: 13~25mm. Outer rail lengths: 3 standard options per model. Rail length specified on order (+L suffix).
ER type Precision Linear Pack — stainless steel precision-formed, heat-treated and ground slide unit. Balls circulate inside inner ball case between outer rail V-grooves for infinite linear motion. Inner block widths: 13~25mm. Outer rail lengths: 3 standard options per model. Rail length specified on order (+L suffix).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ER513 | THK precision linear pack, block W=13mm, rail options 40, 60, 80mm | THK | Block Width: W=13mm | Block Height: M=4.5mm | Outer Rail Lengths: 40, 60, 80mm | Dynamic Load Rating: C=54.9N | Static Load Rating: C0=72.5N | Material: Stainless steel (precision formed, heat-treated, ground) | Motion: Infinite linear via ball circulation in V-groove rail | Rail Length: Specify on order (+L suffix, e.g. ER616 C1 +95L) | |
| ER616 | THK precision linear pack, block W=15.6mm, rail options 45, 70, 95mm | THK | Block Width: W=15.6mm | Block Height: M=6mm | Outer Rail Lengths: 45, 70, 95mm | Dynamic Load Rating: C=71.6N | Static Load Rating: C0=125N | Material: Stainless steel (precision formed, heat-treated, ground) | Motion: Infinite linear via ball circulation in V-groove rail | Rail Length: Specify on order (+L suffix, e.g. ER616 C1 +95L) | |
| ER920 | THK precision linear pack, block W=20mm, rail options 50, 80, 110mm | THK | Block Width: W=20mm | Block Height: M=8.5mm | Outer Rail Lengths: 50, 80, 110mm | Dynamic Load Rating: C=144N | Static Load Rating: C0=201N | Material: Stainless steel (precision formed, heat-treated, ground) | Motion: Infinite linear via ball circulation in V-groove rail | Rail Length: Specify on order (+L suffix, e.g. ER616 C1 +95L) | |
| ER1025 | THK precision linear pack, block W=25mm, rail options 60, 100, 140mm | THK | Block Width: W=25mm | Block Height: M=10mm | Outer Rail Lengths: 60, 100, 140mm | Dynamic Load Rating: C=215N | Static Load Rating: C0=315N | Material: Stainless steel (precision formed, heat-treated, ground) | Motion: Infinite linear via ball circulation in V-groove rail | Rail Length: Specify on order (+L suffix, e.g. ER616 C1 +95L) |
![[THK] — LG Guide Ball Bush Nut (LG4S/L, LG6S/L, LG8S/L)](https://img.prosourcemro.com/2026/05/001-971-300x214.png)
Guide Ball Bush nut with ball-recirculation groove — no rotation stop required. Higher load rating than standard linear bush. Dimensionally interchangeable with LM-type linear bush. Nut and shaft are set-free (independently orderable). Shaft diameters: 4, 6, 8mm. Short (S) and Long (L) variants. Radial clearance: 0~+10μm (standard).
Guide Ball Bush nut with ball-recirculation groove — no rotation stop required. Higher load rating than standard linear bush. Dimensionally interchangeable with LM-type linear bush. Nut and shaft are set-free (independently orderable). Shaft diameters: 4, 6, 8mm. Short (S) and Long (L) variants. Radial clearance: 0~+10μm (standard).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LG4S | THK Guide Ball Bush nut, shaft φ4mm, OD φ8mm, L=12mm (Short) | THK | Shaft Dia.: D0=4mm | Nut OD: D=8mm | Nut Length: L=12mm | Length Type: Short | Radial Clearance: 0~+10μm | Interchangeable: LM-type linear bush | |
| LG4L | THK Guide Ball Bush nut, shaft φ4mm, OD φ8mm, L=19mm (Long) | THK | Shaft Dia.: D0=4mm | Nut OD: D=8mm | Nut Length: L=19mm | Length Type: Long | Radial Clearance: 0~+10μm | Interchangeable: LM-type linear bush | |
| LG6S | THK Guide Ball Bush nut, shaft φ6mm, OD φ12mm, L=19mm (Short) | THK | Shaft Dia.: D0=6mm | Nut OD: D=12mm | Nut Length: L=19mm | Length Type: Short | Radial Clearance: 0~+10μm | Interchangeable: LM-type linear bush | |
| LG6L | THK Guide Ball Bush nut, shaft φ6mm, OD φ12mm, L=27mm (Long) | THK | Shaft Dia.: D0=6mm | Nut OD: D=12mm | Nut Length: L=27mm | Length Type: Long | Radial Clearance: 0~+10μm | Interchangeable: LM-type linear bush | |
| LG8S | THK Guide Ball Bush nut, shaft φ8mm, OD φ15mm, L=24mm (Short) | THK | Shaft Dia.: D0=8mm | Nut OD: D=15mm | Nut Length: L=24mm | Length Type: Short | Radial Clearance: 0~+10μm | Interchangeable: LM-type linear bush | |
| LG8L | THK Guide Ball Bush nut, shaft φ8mm, OD φ15mm, L=30mm (Long) | THK | Shaft Dia.: D0=8mm | Nut OD: D=15mm | Nut Length: L=30mm | Length Type: Long | Radial Clearance: 0~+10μm | Interchangeable: LM-type linear bush |
Guide Ball Bush shaft for LG-type nut. Material: SUJ2, hardness 55~63HRC. Set-free — can be ordered independently from nut. Standard lengths: 100~250mm depending on diameter. Custom lengths available on request.
Guide Ball Bush shaft for LG-type nut. Material: SUJ2, hardness 55~63HRC. Set-free — can be ordered independently from nut. Standard lengths: 100~250mm depending on diameter. Custom lengths available on request.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LG4 | THK Guide Ball Bush shaft LG4, φ4mm, max 150mm | THK | Shaft Dia.: D0=4mm (h7) | Max Length: 150mm | Standard Lengths: 100, 150mm | Material: SUJ2 | Hardness: 55~63HRC | Order: Specify length on order (+L suffix, e.g. LG4-100L) | |
| LG6 | THK Guide Ball Bush shaft LG6, φ6mm, max 200mm | THK | Shaft Dia.: D0=6mm (h7) | Max Length: 200mm | Standard Lengths: 100, 150, 200mm | Material: SUJ2 | Hardness: 55~63HRC | Order: Specify length on order (+L suffix, e.g. LG4-100L) | |
| LG8 | THK Guide Ball Bush shaft LG8, φ8mm, max 250mm | THK | Shaft Dia.: D0=8mm (h7) | Max Length: 250mm | Standard Lengths: 100, 150, 200, 250mm | Material: SUJ2 | Hardness: 55~63HRC | Order: Specify length on order (+L suffix, e.g. LG4-100L) |
![[THK] — LM Linear Bush (LM3~LM60)](https://img.prosourcemro.com/2026/05/001-972-300x236.png)
LM-type Linear Bush — most widely used metric series. High-precision cylindrical outer diameter for broad application. Shaft diameters: 3~60mm. Standard type, clearance-adjustable type (-AJ), and open type (-OP) available. Synthetic resin retainer standard (max 80°C); metal retainer (LM-GA type) for higher temperatures. Oil hole option available (suffix OH). Compatible with LG-type Guide Ball Bush shaft.
LM-type Linear Bush — most widely used metric series. High-precision cylindrical outer diameter for broad application. Shaft diameters: 3~60mm. Standard type, clearance-adjustable type (-AJ), and open type (-OP) available. Synthetic resin retainer standard (max 80°C); metal retainer (LM-GA type) for higher temperatures. Oil hole option available (suffix OH). Compatible with LG-type Guide Ball Bush shaft.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LM3 | THK Linear Bush, shaft φ3mm, OD φ7mm, L=10mm | THK | Shaft Dia.: D0=3mm | Outer Dia.: D=7mm | Length: L=10mm | Variants: Standard only | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM4 | THK Linear Bush, shaft φ4mm, OD φ8mm, L=12mm | THK | Shaft Dia.: D0=4mm | Outer Dia.: D=8mm | Length: L=12mm | Variants: Standard only | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM5 | THK Linear Bush, shaft φ5mm, OD φ10mm, L=15mm | THK | Shaft Dia.: D0=5mm | Outer Dia.: D=10mm | Length: L=15mm | Variants: Standard only | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM6 | THK Linear Bush, shaft φ6mm, OD φ12mm, L=19mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=19mm | Variants: Standard / -AJ | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM8S | THK Linear Bush, shaft φ8mm, OD φ15mm, L=17mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=17mm | Variants: Standard / -AJ (Short) | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM8 | THK Linear Bush, shaft φ8mm, OD φ15mm, L=24mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=24mm | Variants: Standard / -AJ | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM10 | THK Linear Bush, shaft φ10mm, OD φ19mm, L=29mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=29mm | Variants: Standard / -AJ | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM12 | THK Linear Bush, shaft φ12mm, OD φ21mm, L=30mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Variants: Standard / -AJ | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM13 | THK Linear Bush, shaft φ13mm, OD φ23mm, L=32mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Variants: Standard / -AJ / -OP | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM16 | THK Linear Bush, shaft φ16mm, OD φ28mm, L=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Variants: Standard / -AJ / -OP | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM20 | THK Linear Bush, shaft φ20mm, OD φ32mm, L=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Variants: Standard / -AJ / -OP | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM25 | THK Linear Bush, shaft φ25mm, OD φ40mm, L=59mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Variants: Standard / -AJ / -OP | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM30 | THK Linear Bush, shaft φ30mm, OD φ45mm, L=64mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Variants: Standard / -AJ / -OP | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM35 | THK Linear Bush, shaft φ35mm, OD φ52mm, L=70mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=70mm | Variants: Standard / -AJ / -OP | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM40 | THK Linear Bush, shaft φ40mm, OD φ60mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=80mm | Variants: Standard / -AJ / -OP | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM50 | THK Linear Bush, shaft φ50mm, OD φ80mm, L=100mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=80mm | Length: L=100mm | Variants: Standard / -AJ / -OP | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order | |
| LM60 | THK Linear Bush, shaft φ60mm, OD φ90mm, L=110mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=110mm | Variants: Standard / -AJ / -OP | Max Temp.: 80°C (standard retainer) | Retainer: Synthetic resin (standard) | Oil Hole: Add suffix OH on order |
![[THK] — LM-AJ Linear Bush Clearance Adjustable Type (LM6-AJ~LM60-AJ)](https://img.prosourcemro.com/2026/05/001-973-300x244.png)
LM-AJ type Linear Bush — clearance adjustable. Same outer dimensions as standard LM type. Outer shell has a longitudinal slot allowing inner diameter adjustment via housing. Enables easy clearance control between LM shaft and housing. Shaft diameters: 6~60mm. Synthetic resin retainer standard (max 80°C).
LM-AJ type Linear Bush — clearance adjustable. Same outer dimensions as standard LM type. Outer shell has a longitudinal slot allowing inner diameter adjustment via housing. Enables easy clearance control between LM shaft and housing. Shaft diameters: 6~60mm. Synthetic resin retainer standard (max 80°C).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LM6-AJ | THK Linear Bush clearance adjustable, shaft φ6mm, OD φ12mm, L=19mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=19mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM8S-AJ | THK Linear Bush clearance adjustable, shaft φ8mm, OD φ15mm, L=17mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=17mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM8-AJ | THK Linear Bush clearance adjustable, shaft φ8mm, OD φ15mm, L=24mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=24mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM10-AJ | THK Linear Bush clearance adjustable, shaft φ10mm, OD φ19mm, L=29mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=29mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM12-AJ | THK Linear Bush clearance adjustable, shaft φ12mm, OD φ21mm, L=30mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM13-AJ | THK Linear Bush clearance adjustable, shaft φ13mm, OD φ23mm, L=32mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM16-AJ | THK Linear Bush clearance adjustable, shaft φ16mm, OD φ28mm, L=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM20-AJ | THK Linear Bush clearance adjustable, shaft φ20mm, OD φ32mm, L=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM25-AJ | THK Linear Bush clearance adjustable, shaft φ25mm, OD φ40mm, L=59mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM30-AJ | THK Linear Bush clearance adjustable, shaft φ30mm, OD φ45mm, L=64mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM35-AJ | THK Linear Bush clearance adjustable, shaft φ35mm, OD φ52mm, L=70mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=70mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM40-AJ | THK Linear Bush clearance adjustable, shaft φ40mm, OD φ60mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=80mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM50-AJ | THK Linear Bush clearance adjustable, shaft φ50mm, OD φ80mm, L=100mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=80mm | Length: L=100mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM60-AJ | THK Linear Bush clearance adjustable, shaft φ60mm, OD φ90mm, L=110mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=110mm | Type: Clearance Adjustable (slotted outer shell) | Clearance: Adjustable via housing | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LM-GA Linear Bush Metal Retainer Type (LM6GA~LM120A)](https://img.prosourcemro.com/2026/05/001-975-300x243.png)
LM-GA type Linear Bush with metal retainer — for high-temperature environments. Same high-precision cylindrical outer diameter as standard LM type. Oil hole standard. Shaft diameters: 6~120mm. Clearance-adjustable (-AJ) and open type (-OP) variants available from LM12GA. Seal option available on order (seal max temp: 80°C).
LM-GA type Linear Bush with metal retainer — for high-temperature environments. Same high-precision cylindrical outer diameter as standard LM type. Oil hole standard. Shaft diameters: 6~120mm. Clearance-adjustable (-AJ) and open type (-OP) variants available from LM12GA. Seal option available on order (seal max temp: 80°C).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LM6GA | THK Linear Bush metal retainer, shaft φ6mm, OD φ12mm, L=19mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=19mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard only | Seal: Optional (max 80°C) | |
| LM8SGA | THK Linear Bush metal retainer, shaft φ8mm, OD φ15mm, L=17mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=17mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard only | Seal: Optional (max 80°C) | |
| LM8GA | THK Linear Bush metal retainer, shaft φ8mm, OD φ15mm, L=24mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=24mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard only | Seal: Optional (max 80°C) | |
| LM10GA | THK Linear Bush metal retainer, shaft φ10mm, OD φ19mm, L=29mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=29mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard only | Seal: Optional (max 80°C) | |
| LM12GA | THK Linear Bush metal retainer, shaft φ12mm, OD φ21mm, L=30mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) | |
| LM13GA | THK Linear Bush metal retainer, shaft φ13mm, OD φ23mm, L=32mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) | |
| LM16GA | THK Linear Bush metal retainer, shaft φ16mm, OD φ28mm, L=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) | |
| LM20GA | THK Linear Bush metal retainer, shaft φ20mm, OD φ32mm, L=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) | |
| LM25GA | THK Linear Bush metal retainer, shaft φ25mm, OD φ40mm, L=59mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) | |
| LM30GA | THK Linear Bush metal retainer, shaft φ30mm, OD φ45mm, L=64mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) | |
| LM35GA | THK Linear Bush metal retainer, shaft φ35mm, OD φ52mm, L=70mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=70mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) | |
| LM38GA | THK Linear Bush metal retainer, shaft φ38mm, OD φ57mm, L=76mm | THK | Shaft Dia.: D0=38mm | Outer Dia.: D=57mm | Length: L=76mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) | |
| LM40GA | THK Linear Bush metal retainer, shaft φ40mm, OD φ60mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=80mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) | |
| LM50GA | THK Linear Bush metal retainer, shaft φ50mm, OD φ80mm, L=100mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=80mm | Length: L=100mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) | |
| LM60GA | THK Linear Bush metal retainer, shaft φ60mm, OD φ90mm, L=110mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=110mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) | |
| LM80GA | THK Linear Bush metal retainer, shaft φ80mm, OD φ120mm, L=140mm | THK | Shaft Dia.: D0=80mm | Outer Dia.: D=120mm | Length: L=140mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) | |
| LM100GA | THK Linear Bush metal retainer, shaft φ100mm, OD φ150mm, L=175mm | THK | Shaft Dia.: D0=100mm | Outer Dia.: D=150mm | Length: L=175mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) | |
| LM120A | THK Linear Bush metal retainer, shaft φ120mm, OD φ180mm, L=200mm | THK | Shaft Dia.: D0=120mm | Outer Dia.: D=180mm | Length: L=200mm | Retainer: Metal (high-temperature use) | Oil Hole: Standard equipped | Variants: Standard / -AJ / -OP | Seal: Optional (max 80°C) |
![[THK] — LM-GA-AJ Linear Bush Metal Retainer Clearance Adjustable (LM12GA-AJ~LM120A-AJ)](https://img.prosourcemro.com/2026/05/001-976-300x242.png)
LM-GA-AJ type Linear Bush — metal retainer with clearance adjustment. Slotted outer shell allows inner diameter adjustment via housing. For high-temperature environments. Oil hole standard. Shaft diameters: 12~120mm.
LM-GA-AJ type Linear Bush — metal retainer with clearance adjustment. Slotted outer shell allows inner diameter adjustment via housing. For high-temperature environments. Oil hole standard. Shaft diameters: 12~120mm.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LM12GA-AJ | THK Linear Bush metal retainer AJ, shaft φ12mm, OD φ21mm, L=30mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped | |
| LM13GA-AJ | THK Linear Bush metal retainer AJ, shaft φ13mm, OD φ23mm, L=32mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped | |
| LM16GA-AJ | THK Linear Bush metal retainer AJ, shaft φ16mm, OD φ28mm, L=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped | |
| LM20GA-AJ | THK Linear Bush metal retainer AJ, shaft φ20mm, OD φ32mm, L=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped | |
| LM25GA-AJ | THK Linear Bush metal retainer AJ, shaft φ25mm, OD φ40mm, L=59mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped | |
| LM30GA-AJ | THK Linear Bush metal retainer AJ, shaft φ30mm, OD φ45mm, L=64mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped | |
| LM35GA-AJ | THK Linear Bush metal retainer AJ, shaft φ35mm, OD φ52mm, L=70mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=70mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped | |
| LM38GA-AJ | THK Linear Bush metal retainer AJ, shaft φ38mm, OD φ57mm, L=76mm | THK | Shaft Dia.: D0=38mm | Outer Dia.: D=57mm | Length: L=76mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped | |
| LM40GA-AJ | THK Linear Bush metal retainer AJ, shaft φ40mm, OD φ60mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=80mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped | |
| LM50GA-AJ | THK Linear Bush metal retainer AJ, shaft φ50mm, OD φ80mm, L=100mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=80mm | Length: L=100mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped | |
| LM60GA-AJ | THK Linear Bush metal retainer AJ, shaft φ60mm, OD φ90mm, L=110mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=110mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped | |
| LM80GA-AJ | THK Linear Bush metal retainer AJ, shaft φ80mm, OD φ120mm, L=140mm | THK | Shaft Dia.: D0=80mm | Outer Dia.: D=120mm | Length: L=140mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped | |
| LM100GA-AJ | THK Linear Bush metal retainer AJ, shaft φ100mm, OD φ150mm, L=175mm | THK | Shaft Dia.: D0=100mm | Outer Dia.: D=150mm | Length: L=175mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped | |
| LM120A-AJ | THK Linear Bush metal retainer AJ, shaft φ120mm, OD φ180mm, L=200mm | THK | Shaft Dia.: D0=120mm | Outer Dia.: D=180mm | Length: L=200mm | Retainer: Metal (high-temperature use) | Type: Clearance adjustable (slotted outer shell) | Oil Hole: Standard equipped |
![[THK] — LM-GA-OP Linear Bush Metal Retainer Open Type (LM12GA-OP~LM120A-OP)](https://img.prosourcemro.com/2026/05/001-977-300x242.png)
LM-GA-OP type Linear Bush — metal retainer, open type. One ball circuit (50~80°) cut away from outer shell. Usable at shaft deflection support points. Clearance adjustable. For high-temperature environments. Oil hole standard. Shaft diameters: 12~120mm.
LM-GA-OP type Linear Bush — metal retainer, open type. One ball circuit (50~80°) cut away from outer shell. Usable at shaft deflection support points. Clearance adjustable. For high-temperature environments. Oil hole standard. Shaft diameters: 12~120mm.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LM12GA-OP | THK Linear Bush metal retainer OP, shaft φ12mm, OD φ21mm, L=30mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable | |
| LM13GA-OP | THK Linear Bush metal retainer OP, shaft φ13mm, OD φ23mm, L=32mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable | |
| LM16GA-OP | THK Linear Bush metal retainer OP, shaft φ16mm, OD φ28mm, L=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable | |
| LM20GA-OP | THK Linear Bush metal retainer OP, shaft φ20mm, OD φ32mm, L=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable | |
| LM25GA-OP | THK Linear Bush metal retainer OP, shaft φ25mm, OD φ40mm, L=59mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable | |
| LM30GA-OP | THK Linear Bush metal retainer OP, shaft φ30mm, OD φ45mm, L=64mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable | |
| LM35GA-OP | THK Linear Bush metal retainer OP, shaft φ35mm, OD φ52mm, L=70mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=70mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable | |
| LM38GA-OP | THK Linear Bush metal retainer OP, shaft φ38mm, OD φ57mm, L=76mm | THK | Shaft Dia.: D0=38mm | Outer Dia.: D=57mm | Length: L=76mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable | |
| LM40GA-OP | THK Linear Bush metal retainer OP, shaft φ40mm, OD φ60mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=80mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable | |
| LM50GA-OP | THK Linear Bush metal retainer OP, shaft φ50mm, OD φ80mm, L=100mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=80mm | Length: L=100mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable | |
| LM60GA-OP | THK Linear Bush metal retainer OP, shaft φ60mm, OD φ90mm, L=110mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=110mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable | |
| LM80GA-OP | THK Linear Bush metal retainer OP, shaft φ80mm, OD φ120mm, L=140mm | THK | Shaft Dia.: D0=80mm | Outer Dia.: D=120mm | Length: L=140mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable | |
| LM100GA-OP | THK Linear Bush metal retainer OP, shaft φ100mm, OD φ150mm, L=175mm | THK | Shaft Dia.: D0=100mm | Outer Dia.: D=150mm | Length: L=175mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable | |
| LM120A-OP | THK Linear Bush metal retainer OP, shaft φ120mm, OD φ180mm, L=200mm | THK | Shaft Dia.: D0=120mm | Outer Dia.: D=180mm | Length: L=200mm | Retainer: Metal (high-temperature use) | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Oil Hole: Standard equipped | Clearance: Adjustable |
![[THK] — LM-L Linear Bush Long Type (LM3L~LM60L)](https://img.prosourcemro.com/2026/05/001-984-300x241.png)
LM-L type Linear Bush — long type with two retainers. Optimal for moment load applications. Reduces assembly man-hours. Shaft diameters: 3~60mm. Stainless steel type (LM3ML~LM30ML) available on request. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LM-L type Linear Bush — long type with two retainers. Optimal for moment load applications. Reduces assembly man-hours. Shaft diameters: 3~60mm. Stainless steel type (LM3ML~LM30ML) available on request. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LM3L | THK Linear Bush long type, shaft φ3mm, OD φ7mm, L=19mm | THK | Shaft Dia.: D0=3mm | Outer Dia.: D=7mm | Length: L=19mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM4L | THK Linear Bush long type, shaft φ4mm, OD φ8mm, L=23mm | THK | Shaft Dia.: D0=4mm | Outer Dia.: D=8mm | Length: L=23mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM5L | THK Linear Bush long type, shaft φ5mm, OD φ10mm, L=29mm | THK | Shaft Dia.: D0=5mm | Outer Dia.: D=10mm | Length: L=29mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM6L | THK Linear Bush long type, shaft φ6mm, OD φ12mm, L=35mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=35mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM8L | THK Linear Bush long type, shaft φ8mm, OD φ15mm, L=45mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=45mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM10L | THK Linear Bush long type, shaft φ10mm, OD φ19mm, L=55mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=55mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM12L | THK Linear Bush long type, shaft φ12mm, OD φ21mm, L=57mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=57mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM13L | THK Linear Bush long type, shaft φ13mm, OD φ23mm, L=61mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=61mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM16L | THK Linear Bush long type, shaft φ16mm, OD φ28mm, L=70mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=70mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM20L | THK Linear Bush long type, shaft φ20mm, OD φ32mm, L=80mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=80mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM25L | THK Linear Bush long type, shaft φ25mm, OD φ40mm, L=112mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=112mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM30L | THK Linear Bush long type, shaft φ30mm, OD φ45mm, L=123mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=123mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM35L | THK Linear Bush long type, shaft φ35mm, OD φ52mm, L=135mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=135mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM40L | THK Linear Bush long type, shaft φ40mm, OD φ60mm, L=154mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=154mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM50L | THK Linear Bush long type, shaft φ50mm, OD φ80mm, L=192mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=80mm | Length: L=192mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order | |
| LM60L | THK Linear Bush long type, shaft φ60mm, OD φ90mm, L=211mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=211mm | Type: Long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Stainless Option: LM3ML~LM30ML available on request | Oil Hole: Add suffix OH on order |
![[THK] — LM-MG Linear Bush Stainless Steel Type (LM3M~LM40MG)](https://img.prosourcemro.com/2026/05/001-978-300x263.png)
LM-MG type Linear Bush — stainless steel series of LM type. Nut and balls made of stainless steel for excellent corrosion and environmental resistance. High-precision cylindrical outer diameter. Shaft diameters: 3~40mm. Clearance-adjustable (-AJ) and open type (-MGA-OP, metal retainer only) variants available from LM6MG. Metal retainer option available for marked (*) models. Oil hole option available (suffix OH). Max temp: 80°C (standard retainer).
LM-MG type Linear Bush — stainless steel series of LM type. Nut and balls made of stainless steel for excellent corrosion and environmental resistance. High-precision cylindrical outer diameter. Shaft diameters: 3~40mm. Clearance-adjustable (-AJ) and open type (-MGA-OP, metal retainer only) variants available from LM6MG. Metal retainer option available for marked (*) models. Oil hole option available (suffix OH). Max temp: 80°C (standard retainer).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LM3M | THK Linear Bush stainless, shaft φ3mm, OD φ7mm, L=10mm | THK | Shaft Dia.: D0=3mm | Outer Dia.: D=7mm | Length: L=10mm | Material: Stainless steel (nut and balls) | Variants: Standard only | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM4M | THK Linear Bush stainless, shaft φ4mm, OD φ8mm, L=12mm | THK | Shaft Dia.: D0=4mm | Outer Dia.: D=8mm | Length: L=12mm | Material: Stainless steel (nut and balls) | Variants: Standard only | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM5M | THK Linear Bush stainless, shaft φ5mm, OD φ10mm, L=15mm | THK | Shaft Dia.: D0=5mm | Outer Dia.: D=10mm | Length: L=15mm | Material: Stainless steel (nut and balls) | Variants: Standard only | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM6MG | THK Linear Bush stainless, shaft φ6mm, OD φ12mm, L=19mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=19mm | Material: Stainless steel (nut and balls) | Variants: Standard / -AJ | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM8SMG | THK Linear Bush stainless, shaft φ8mm, OD φ15mm, L=17mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=17mm | Material: Stainless steel (nut and balls) | Variants: Standard / -AJ | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM8MG | THK Linear Bush stainless, shaft φ8mm, OD φ15mm, L=24mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=24mm | Material: Stainless steel (nut and balls) | Variants: Standard / -AJ | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM10MG | THK Linear Bush stainless, shaft φ10mm, OD φ19mm, L=29mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=29mm | Material: Stainless steel (nut and balls) | Variants: Standard / -AJ | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM12MG | THK Linear Bush stainless, shaft φ12mm, OD φ21mm, L=30mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Material: Stainless steel (nut and balls) | Variants: Standard / -AJ | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM13MG | THK Linear Bush stainless, shaft φ13mm, OD φ23mm, L=32mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Material: Stainless steel (nut and balls) | Variants: Standard / -AJ / -MGA-OP (metal retainer) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM16MG | THK Linear Bush stainless, shaft φ16mm, OD φ28mm, L=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Material: Stainless steel (nut and balls) | Variants: Standard / -AJ / -MGA-OP (metal retainer) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM20MG | THK Linear Bush stainless, shaft φ20mm, OD φ32mm, L=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Material: Stainless steel (nut and balls) | Variants: Standard / -AJ / -MGA-OP (metal retainer) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM25MG | THK Linear Bush stainless, shaft φ25mm, OD φ40mm, L=59mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Material: Stainless steel (nut and balls) | Variants: Standard / -AJ / -MGA-OP (metal retainer) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM30MG | THK Linear Bush stainless, shaft φ30mm, OD φ45mm, L=64mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Material: Stainless steel (nut and balls) | Variants: Standard / -AJ / -MGA-OP (metal retainer) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM35MG | THK Linear Bush stainless, shaft φ35mm, OD φ52mm, L=70mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=70mm | Material: Stainless steel (nut and balls) | Variants: Standard / -AJ / -MGA-OP (metal retainer) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM40MG | THK Linear Bush stainless, shaft φ40mm, OD φ60mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=80mm | Material: Stainless steel (nut and balls) | Variants: Standard / -AJ / -MGA-OP (metal retainer) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LM-MG-AJ Linear Bush Stainless Clearance Adjustable (LM6MG-AJ~LM40MG-AJ)](https://img.prosourcemro.com/2026/05/001-979-300x264.png)
LM-MG-AJ type Linear Bush — stainless steel, clearance adjustable. Slotted outer shell allows inner diameter adjustment via housing. Stainless steel nut and balls for corrosion resistance. Shaft diameters: 6~40mm. Max temp: 80°C (standard retainer).
LM-MG-AJ type Linear Bush — stainless steel, clearance adjustable. Slotted outer shell allows inner diameter adjustment via housing. Stainless steel nut and balls for corrosion resistance. Shaft diameters: 6~40mm. Max temp: 80°C (standard retainer).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LM6MG-AJ | THK Linear Bush stainless AJ, shaft φ6mm, OD φ12mm, L=19mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=19mm | Material: Stainless steel (nut and balls) | Type: Clearance adjustable (slotted outer shell) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM8SMG-AJ | THK Linear Bush stainless AJ, shaft φ8mm, OD φ15mm, L=17mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=17mm | Material: Stainless steel (nut and balls) | Type: Clearance adjustable (slotted outer shell) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM8MG-AJ | THK Linear Bush stainless AJ, shaft φ8mm, OD φ15mm, L=24mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=24mm | Material: Stainless steel (nut and balls) | Type: Clearance adjustable (slotted outer shell) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM10MG-AJ | THK Linear Bush stainless AJ, shaft φ10mm, OD φ19mm, L=29mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=29mm | Material: Stainless steel (nut and balls) | Type: Clearance adjustable (slotted outer shell) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM12MG-AJ | THK Linear Bush stainless AJ, shaft φ12mm, OD φ21mm, L=30mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Material: Stainless steel (nut and balls) | Type: Clearance adjustable (slotted outer shell) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM13MG-AJ | THK Linear Bush stainless AJ, shaft φ13mm, OD φ23mm, L=32mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Material: Stainless steel (nut and balls) | Type: Clearance adjustable (slotted outer shell) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM16MG-AJ | THK Linear Bush stainless AJ, shaft φ16mm, OD φ28mm, L=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Material: Stainless steel (nut and balls) | Type: Clearance adjustable (slotted outer shell) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM20MG-AJ | THK Linear Bush stainless AJ, shaft φ20mm, OD φ32mm, L=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Material: Stainless steel (nut and balls) | Type: Clearance adjustable (slotted outer shell) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM25MG-AJ | THK Linear Bush stainless AJ, shaft φ25mm, OD φ40mm, L=59mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Material: Stainless steel (nut and balls) | Type: Clearance adjustable (slotted outer shell) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM30MG-AJ | THK Linear Bush stainless AJ, shaft φ30mm, OD φ45mm, L=64mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Material: Stainless steel (nut and balls) | Type: Clearance adjustable (slotted outer shell) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM35MG-AJ | THK Linear Bush stainless AJ, shaft φ35mm, OD φ52mm, L=70mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=70mm | Material: Stainless steel (nut and balls) | Type: Clearance adjustable (slotted outer shell) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM40MG-AJ | THK Linear Bush stainless AJ, shaft φ40mm, OD φ60mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=80mm | Material: Stainless steel (nut and balls) | Type: Clearance adjustable (slotted outer shell) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LM-MGA-OP Linear Bush Stainless Open Type Metal Retainer (LM13MGA-OP~LM40MGA-OP)](https://img.prosourcemro.com/2026/05/001-980-300x240.png)
LM-MGA-OP type Linear Bush — stainless steel, open type, metal retainer. One ball circuit (50~80°) cut away from outer shell. Usable at shaft deflection support points. Clearance adjustable. Stainless steel nut and balls. Metal retainer only. Shaft diameters: 13~40mm.
LM-MGA-OP type Linear Bush — stainless steel, open type, metal retainer. One ball circuit (50~80°) cut away from outer shell. Usable at shaft deflection support points. Clearance adjustable. Stainless steel nut and balls. Metal retainer only. Shaft diameters: 13~40mm.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LM13MGA-OP | THK Linear Bush stainless open type, shaft φ13mm, OD φ23mm, L=32mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Material: Stainless steel (nut and balls) | Retainer: Metal only | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | |
| LM16MGA-OP | THK Linear Bush stainless open type, shaft φ16mm, OD φ28mm, L=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Material: Stainless steel (nut and balls) | Retainer: Metal only | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | |
| LM20MGA-OP | THK Linear Bush stainless open type, shaft φ20mm, OD φ32mm, L=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Material: Stainless steel (nut and balls) | Retainer: Metal only | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | |
| LM25MGA-OP | THK Linear Bush stainless open type, shaft φ25mm, OD φ40mm, L=59mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Material: Stainless steel (nut and balls) | Retainer: Metal only | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | |
| LM30MGA-OP | THK Linear Bush stainless open type, shaft φ30mm, OD φ45mm, L=64mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Material: Stainless steel (nut and balls) | Retainer: Metal only | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | |
| LM35MGA-OP | THK Linear Bush stainless open type, shaft φ35mm, OD φ52mm, L=70mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=70mm | Material: Stainless steel (nut and balls) | Retainer: Metal only | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | |
| LM40MGA-OP | THK Linear Bush stainless open type, shaft φ40mm, OD φ60mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=80mm | Material: Stainless steel (nut and balls) | Retainer: Metal only | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable |
![[THK] — LM-OP Linear Bush Open Type (LM13-OP~LM60-OP)](https://img.prosourcemro.com/2026/05/001-974-300x243.png)
LM-OP type Linear Bush — open type. One ball circuit (50~80°) is cut away from the outer shell, allowing use where the LM shaft is supported at a deflection point. Clearance easily adjustable. Shaft diameters: 13~60mm. Synthetic resin retainer standard (max 80°C).
LM-OP type Linear Bush — open type. One ball circuit (50~80°) is cut away from the outer shell, allowing use where the LM shaft is supported at a deflection point. Clearance easily adjustable. Shaft diameters: 13~60mm. Synthetic resin retainer standard (max 80°C).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LM13-OP | THK Linear Bush open type, shaft φ13mm, OD φ23mm, L=32mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM16-OP | THK Linear Bush open type, shaft φ16mm, OD φ28mm, L=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM20-OP | THK Linear Bush open type, shaft φ20mm, OD φ32mm, L=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM25-OP | THK Linear Bush open type, shaft φ25mm, OD φ40mm, L=59mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM30-OP | THK Linear Bush open type, shaft φ30mm, OD φ45mm, L=64mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM35-OP | THK Linear Bush open type, shaft φ35mm, OD φ52mm, L=70mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=70mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM40-OP | THK Linear Bush open type, shaft φ40mm, OD φ60mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=80mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM50-OP | THK Linear Bush open type, shaft φ50mm, OD φ80mm, L=100mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=80mm | Length: L=100mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM60-OP | THK Linear Bush open type, shaft φ60mm, OD φ90mm, L=110mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=110mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMCF-L Linear Bush Center Flange Long Type (LMCF6L~LMCF25L)](https://img.prosourcemro.com/2026/05/001-991-300x241.png)
LMCF-L type Linear Bush — center flange, long type. Flange positioned at center of bush body; load is distributed equally to both sides. Ideal for equal stroke in both directions. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMCF-L type Linear Bush — center flange, long type. Flange positioned at center of bush body; load is distributed equally to both sides. Ideal for equal stroke in both directions. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMCF6L | THK Linear Bush center flange long, shaft φ6mm, OD φ12mm, L=35mm, flange φ28mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=35mm | Flange OD: D1=28mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF8L | THK Linear Bush center flange long, shaft φ8mm, OD φ15mm, L=45mm, flange φ32mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=45mm | Flange OD: D1=32mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF10L | THK Linear Bush center flange long, shaft φ10mm, OD φ19mm, L=55mm, flange φ39mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=55mm | Flange OD: D1=39mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF12L | THK Linear Bush center flange long, shaft φ12mm, OD φ21mm, L=57mm, flange φ42mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=57mm | Flange OD: D1=42mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF13L | THK Linear Bush center flange long, shaft φ13mm, OD φ23mm, L=61mm, flange φ43mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=61mm | Flange OD: D1=43mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF16L | THK Linear Bush center flange long, shaft φ16mm, OD φ28mm, L=70mm, flange φ48mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=70mm | Flange OD: D1=48mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF20L | THK Linear Bush center flange long, shaft φ20mm, OD φ32mm, L=80mm, flange φ54mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=80mm | Flange OD: D1=54mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF25L | THK Linear Bush center flange long, shaft φ25mm, OD φ40mm, L=112mm, flange φ62mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=112mm | Flange OD: D1=62mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMCH-L Linear Bush Center Small Plate Flange Long Type (LMCH6L~LMCH25L)](https://img.prosourcemro.com/2026/05/001-1003-300x239.png)
LMCH-L type Linear Bush — center small plate flange, long type. Lower center height than LMCF type for ultra-compact design. Flange at center of bush body for equal load distribution both sides. Two retainers for optimal moment load performance. 2 ball circuits in flat direction for improved service life. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMCH-L type Linear Bush — center small plate flange, long type. Lower center height than LMCF type for ultra-compact design. Flange at center of bush body for equal load distribution both sides. Two retainers for optimal moment load performance. 2 ball circuits in flat direction for improved service life. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMCH6L | THK Linear Bush center small plate flange long, shaft φ6mm, OD φ12mm, L=35mm, K=18mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=35mm | Flange OD: D1=28mm | Square Width: K=18mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH8L | THK Linear Bush center small plate flange long, shaft φ8mm, OD φ15mm, L=45mm, K=21mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=45mm | Flange OD: D1=32mm | Square Width: K=21mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH10L | THK Linear Bush center small plate flange long, shaft φ10mm, OD φ19mm, L=55mm, K=25mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=55mm | Flange OD: D1=39mm | Square Width: K=25mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH12L | THK Linear Bush center small plate flange long, shaft φ12mm, OD φ21mm, L=57mm, K=27mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=57mm | Flange OD: D1=42mm | Square Width: K=27mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH13L | THK Linear Bush center small plate flange long, shaft φ13mm, OD φ23mm, L=61mm, K=29mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=61mm | Flange OD: D1=43mm | Square Width: K=29mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH16L | THK Linear Bush center small plate flange long, shaft φ16mm, OD φ28mm, L=70mm, K=34mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=70mm | Flange OD: D1=48mm | Square Width: K=34mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH20L | THK Linear Bush center small plate flange long, shaft φ20mm, OD φ32mm, L=80mm, K=38mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=80mm | Flange OD: D1=54mm | Square Width: K=38mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH25L | THK Linear Bush center small plate flange long, shaft φ25mm, OD φ40mm, L=112mm, K=46mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=112mm | Flange OD: D1=62mm | Square Width: K=46mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMCK-L Linear Bush Center Square Flange Long Type (LMCK6L~LMCK25L)](https://img.prosourcemro.com/2026/05/001-1000-300x239.png)
LMCK-L type Linear Bush — center square flange, long type. 4-flat version of LMCF-L; lower center height than round center flange for compact design. Flange at center of bush body for equal load distribution both sides. Two retainers for optimal moment load performance. Ideal for equal stroke in both directions. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMCK-L type Linear Bush — center square flange, long type. 4-flat version of LMCF-L; lower center height than round center flange for compact design. Flange at center of bush body for equal load distribution both sides. Two retainers for optimal moment load performance. Ideal for equal stroke in both directions. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMCK6L | THK Linear Bush center square flange long, shaft φ6mm, OD φ12mm, L=35mm, K=22mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=35mm | Flange OD: D1=28mm | Square Width: K=22mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK8L | THK Linear Bush center square flange long, shaft φ8mm, OD φ15mm, L=45mm, K=25mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=45mm | Flange OD: D1=32mm | Square Width: K=25mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK10L | THK Linear Bush center square flange long, shaft φ10mm, OD φ19mm, L=55mm, K=30mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=55mm | Flange OD: D1=39mm | Square Width: K=30mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK12L | THK Linear Bush center square flange long, shaft φ12mm, OD φ21mm, L=57mm, K=32mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=57mm | Flange OD: D1=42mm | Square Width: K=32mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK13L | THK Linear Bush center square flange long, shaft φ13mm, OD φ23mm, L=61mm, K=34mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=61mm | Flange OD: D1=43mm | Square Width: K=34mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK16L | THK Linear Bush center square flange long, shaft φ16mm, OD φ28mm, L=70mm, K=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=70mm | Flange OD: D1=48mm | Square Width: K=37mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK20L | THK Linear Bush center square flange long, shaft φ20mm, OD φ32mm, L=80mm, K=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=80mm | Flange OD: D1=54mm | Square Width: K=42mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK25L | THK Linear Bush center square flange long, shaft φ25mm, OD φ40mm, L=112mm, K=50mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=112mm | Flange OD: D1=62mm | Square Width: K=50mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LME Linear Bush European Metric Series (LME5~LME80GA)](https://img.prosourcemro.com/2026/05/001-981-300x241.png)
LME type Linear Bush — European metric dimension series. High-precision cylindrical outer diameter for broad application. Shaft diameters: 5~80mm. LME5~LME60: synthetic resin retainer (max 80°C). LME80GA: metal retainer type. Clearance-adjustable (-AJ) and open type (-OP) variants available from LME16. Metal retainer option available (suffix A). Oil hole option (suffix OH).
LME type Linear Bush — European metric dimension series. High-precision cylindrical outer diameter for broad application. Shaft diameters: 5~80mm. LME5~LME60: synthetic resin retainer (max 80°C). LME80GA: metal retainer type. Clearance-adjustable (-AJ) and open type (-OP) variants available from LME16. Metal retainer option available (suffix A). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LME5 | THK Linear Bush European metric, shaft φ5mm, OD φ12mm, L=22mm | THK | Shaft Dia.: D0=5mm | Outer Dia.: D=12mm | Length: L=22mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ | Oil Hole: Add suffix OH on order | |
| LME8 | THK Linear Bush European metric, shaft φ8mm, OD φ16mm, L=25mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=16mm | Length: L=25mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ | Oil Hole: Add suffix OH on order | |
| LME12 | THK Linear Bush European metric, shaft φ12mm, OD φ22mm, L=32mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=22mm | Length: L=32mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ | Oil Hole: Add suffix OH on order | |
| LME16 | THK Linear Bush European metric, shaft φ16mm, OD φ26mm, L=36mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=26mm | Length: L=36mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME20 | THK Linear Bush European metric, shaft φ20mm, OD φ32mm, L=45mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=45mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME25 | THK Linear Bush European metric, shaft φ25mm, OD φ40mm, L=58mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=58mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME30 | THK Linear Bush European metric, shaft φ30mm, OD φ47mm, L=68mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=47mm | Length: L=68mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME40 | THK Linear Bush European metric, shaft φ40mm, OD φ62mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=62mm | Length: L=80mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME50 | THK Linear Bush European metric, shaft φ50mm, OD φ75mm, L=100mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=75mm | Length: L=100mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME60 | THK Linear Bush European metric, shaft φ60mm, OD φ90mm, L=125mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=125mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME80GA | THK Linear Bush European metric, shaft φ80mm, OD φ120mm, L=165mm | THK | Shaft Dia.: D0=80mm | Outer Dia.: D=120mm | Length: L=165mm | Retainer: Metal | Variants: Standard / -AJ / -OP (metal retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LME-AJ Linear Bush European Metric Clearance Adjustable (LME5-AJ~LME80GA-AJ)](https://img.prosourcemro.com/2026/05/001-982-300x241.png)
LME-AJ type Linear Bush — European metric series, clearance adjustable. Slotted outer shell allows inner diameter adjustment via housing. Shaft diameters: 5~80mm. LME5-AJ~LME60-AJ: synthetic resin retainer (max 80°C). LME80GA-AJ: metal retainer type.
LME-AJ type Linear Bush — European metric series, clearance adjustable. Slotted outer shell allows inner diameter adjustment via housing. Shaft diameters: 5~80mm. LME5-AJ~LME60-AJ: synthetic resin retainer (max 80°C). LME80GA-AJ: metal retainer type.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LME5-AJ | THK Linear Bush European metric AJ, shaft φ5mm, OD φ12mm, L=22mm | THK | Shaft Dia.: D0=5mm | Outer Dia.: D=12mm | Length: L=22mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME8-AJ | THK Linear Bush European metric AJ, shaft φ8mm, OD φ16mm, L=25mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=16mm | Length: L=25mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME12-AJ | THK Linear Bush European metric AJ, shaft φ12mm, OD φ22mm, L=32mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=22mm | Length: L=32mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME16-AJ | THK Linear Bush European metric AJ, shaft φ16mm, OD φ26mm, L=36mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=26mm | Length: L=36mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME20-AJ | THK Linear Bush European metric AJ, shaft φ20mm, OD φ32mm, L=45mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=45mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME25-AJ | THK Linear Bush European metric AJ, shaft φ25mm, OD φ40mm, L=58mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=58mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME30-AJ | THK Linear Bush European metric AJ, shaft φ30mm, OD φ47mm, L=68mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=47mm | Length: L=68mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME40-AJ | THK Linear Bush European metric AJ, shaft φ40mm, OD φ62mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=62mm | Length: L=80mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME50-AJ | THK Linear Bush European metric AJ, shaft φ50mm, OD φ75mm, L=100mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=75mm | Length: L=100mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME60-AJ | THK Linear Bush European metric AJ, shaft φ60mm, OD φ90mm, L=125mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=125mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME80GA-AJ | THK Linear Bush European metric AJ, shaft φ80mm, OD φ120mm, L=165mm | THK | Shaft Dia.: D0=80mm | Outer Dia.: D=120mm | Length: L=165mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Metal | Oil Hole: Add suffix OH on order |
![[THK] — LME-OP Linear Bush European Metric Open Type (LME16-OP~LME80GA-OP)](https://img.prosourcemro.com/2026/05/001-983-300x241.png)
LME-OP type Linear Bush — European metric series, open type. One ball circuit cut away from outer shell. Usable at shaft deflection support points. Clearance adjustable. Shaft diameters: 16~80mm. LME16-OP~LME60-OP: synthetic resin retainer (max 80°C). LME80GA-OP: metal retainer type.
LME-OP type Linear Bush — European metric series, open type. One ball circuit cut away from outer shell. Usable at shaft deflection support points. Clearance adjustable. Shaft diameters: 16~80mm. LME16-OP~LME60-OP: synthetic resin retainer (max 80°C). LME80GA-OP: metal retainer type.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LME16-OP | THK Linear Bush European metric OP, shaft φ16mm, OD φ26mm, L=36mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=26mm | Length: L=36mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME20-OP | THK Linear Bush European metric OP, shaft φ20mm, OD φ32mm, L=45mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=45mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME25-OP | THK Linear Bush European metric OP, shaft φ25mm, OD φ40mm, L=58mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=58mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME30-OP | THK Linear Bush European metric OP, shaft φ30mm, OD φ47mm, L=68mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=47mm | Length: L=68mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME40-OP | THK Linear Bush European metric OP, shaft φ40mm, OD φ62mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=62mm | Length: L=80mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME50-OP | THK Linear Bush European metric OP, shaft φ50mm, OD φ75mm, L=100mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=75mm | Length: L=100mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME60-OP | THK Linear Bush European metric OP, shaft φ60mm, OD φ90mm, L=125mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=125mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME80GA-OP | THK Linear Bush European metric OP, shaft φ80mm, OD φ120mm, L=165mm | THK | Shaft Dia.: D0=80mm | Outer Dia.: D=120mm | Length: L=165mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Metal | Clearance: Adjustable | Oil Hole: Add suffix OH on order |
![[THK] — LMF Linear Bush Flange Type (LMF6~LMF60)](https://img.prosourcemro.com/2026/05/001-985-300x241.png)
LMF type Linear Bush — flange integrated type. Nut and flange in one piece; mounts directly to housing with bolts. Shaft diameters: 6~60mm. Short type (LMF8S) available for φ8mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMF type Linear Bush — flange integrated type. Nut and flange in one piece; mounts directly to housing with bolts. Shaft diameters: 6~60mm. Short type (LMF8S) available for φ8mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMF6 | THK Linear Bush flange type, shaft φ6mm, OD φ12mm, L=19mm, flange φ28mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=19mm | Flange OD: D1=28mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF8S | THK Linear Bush flange type, shaft φ8mm, OD φ15mm, L=17mm, flange φ32mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=17mm | Flange OD: D1=32mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF8 | THK Linear Bush flange type, shaft φ8mm, OD φ15mm, L=24mm, flange φ32mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=24mm | Flange OD: D1=32mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF10 | THK Linear Bush flange type, shaft φ10mm, OD φ19mm, L=29mm, flange φ39mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=29mm | Flange OD: D1=39mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF12 | THK Linear Bush flange type, shaft φ12mm, OD φ21mm, L=30mm, flange φ42mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Flange OD: D1=42mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF13 | THK Linear Bush flange type, shaft φ13mm, OD φ23mm, L=32mm, flange φ43mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Flange OD: D1=43mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF16 | THK Linear Bush flange type, shaft φ16mm, OD φ28mm, L=37mm, flange φ48mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Flange OD: D1=48mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF20 | THK Linear Bush flange type, shaft φ20mm, OD φ32mm, L=42mm, flange φ54mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Flange OD: D1=54mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF25 | THK Linear Bush flange type, shaft φ25mm, OD φ40mm, L=59mm, flange φ62mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Flange OD: D1=62mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF30 | THK Linear Bush flange type, shaft φ30mm, OD φ45mm, L=64mm, flange φ74mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Flange OD: D1=74mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF35 | THK Linear Bush flange type, shaft φ35mm, OD φ52mm, L=70mm, flange φ82mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=70mm | Flange OD: D1=82mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF40 | THK Linear Bush flange type, shaft φ40mm, OD φ60mm, L=80mm, flange φ96mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=80mm | Flange OD: D1=96mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF50 | THK Linear Bush flange type, shaft φ50mm, OD φ80mm, L=100mm, flange φ116mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=80mm | Length: L=100mm | Flange OD: D1=116mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF60 | THK Linear Bush flange type, shaft φ60mm, OD φ90mm, L=110mm, flange φ134mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=110mm | Flange OD: D1=134mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |