Rulers & Levels

The BlueTec BD-45180 Steel Ruler Combination Square Set is a versatile layout and measurement tool designed for precise angle marking, squareness checking, and depth gauging, sourced direct from Korea. Machinists, woodworkers, and fabricators rely on combination square sets like this to ensure accurate 45° and 90° reference angles across a wide range of layout and inspection tasks. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

BlueTec BD-700A Steel Ruler Taper Gauge is a precision hand measurement tool designed to determine slot widths, gap clearances, and taper dimensions, sourced direct from Korea. Machinists, toolroom technicians, and quality control inspectors rely on taper gauges like this to quickly verify whether a gap or opening falls within acceptable tolerance during fabrication, assembly, and incoming inspection workflows. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

BlueTec BD-700S Steel Ruler Taper Gauge Set is a precision hand measurement tool combining a steel rule with taper gauge functionality, sourced direct from Korea. Taper gauges are commonly used by machinists, fabricators, and maintenance technicians to quickly measure slot widths, gap clearances, and tapered openings in metal components and assemblies. Request a quote today to access export-ready supply of this measuring set at competitive pricing through a KITA-registered Korean exporter.

BlueTec BD-ALS150 Steel Ruler Square Level is a combination measuring and leveling tool designed for precise layout, marking, and right-angle verification, sourced direct from Korea. Steel ruler squares with integrated levels are commonly used in metalworking, carpentry, and fabrication settings where both flatness and angular accuracy need to be confirmed in a single step. Request a quote today for export-ready supply of this BlueTec measuring tool, competitively priced through a KITA-registered Korean exporter.

BlueTec BD-AR150 Steel Ruler Aluminum Straightedge is a precision measuring and layout tool designed for accurate straight-line marking and length measurement, sourced direct from Korea. Aluminum straightedges like this are commonly used by machinists, fabricators, and draftsmen to verify flatness, guide cutting tools, and lay out reference lines on workpieces or drawing surfaces. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

BlueTec BD-AS018 Steel Ruler Triangle Protractor is a precision angle-measuring and layout tool combining a steel ruler with a triangular protractor head, sourced direct from Korea. Fabricators, machinists, and drafters rely on this type of combination tool for marking consistent angles, checking geometry, and transferring measurements across metal, wood, and composite workpieces. Request a quote today to access export-ready stock, competitive wholesale pricing, and reliable supply through a KITA-registered Korean exporter.

BlueTec BD-ASQ150 Steel Ruler Right Angle Ruler in zinc construction delivers precise 90-degree measurement and marking for layout work, sourced direct from Korea. Zinc-body try squares like this are a shop-floor staple for carpenters, metalworkers, and fabricators who need a reliable reference edge when scribing lines, checking squareness, or setting up workpieces. Request a quote today for export-ready supply with competitive pricing through a KITA-registered Korean exporter.

BlueTec BD-CA150 Steel Ruler Right Angle Ruler is a graduated aluminum layout tool for marking and verifying 90-degree angles, sourced direct from Korea. Fabricators, carpenters, and sheet metal workers rely on right angle rulers to ensure square cuts, consistent layouts, and accurate assembly alignment across a wide range of materials. Request a quote today for export-ready supply of this precision layout tool at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The BlueTec BD-CSQ300 Steel Ruler Combination Square is a precision layout and measurement tool designed for accurate angle marking, depth gauging, and 90°/45° checks, sourced direct from Korea. Combination squares are widely used by machinists, carpenters, and fabricators who need reliable squareness checks and scribe line references across metal, wood, and composite workpieces. Request a quote today for export-ready supply with competitive pricing, fulfilled through a KITA-registered Korean exporter.

BlueTec BD-FJ150 Steel Ruler (Matte) is a precision measuring tool designed for accurate straight-line measurement and marking, sourced direct from Korea. Matte-finish steel rulers are a staple in fabrication shops, machine rooms, and drafting environments where glare reduction matters for reading fine graduations under workshop lighting. Request a quote today for export-ready supply at competitive pricing through our KITA-registered Korean exporter.

The BlueTec BD-IC25 Steel Ruler Ink Pot is a manual marking tool designed for precise straight-line inking along steel ruler edges, sourced direct from Korea. Commonly used in woodworking, metalworking, and pattern layout tasks, it allows tradespeople and fabricators to draw clean, consistent ink lines on workpieces without the inconsistency of freehand marking. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

BlueTec BD-No.19 Steel Ruler Protractor is a combination measuring tool that integrates a rigid steel ruler with an angle-measuring protractor, sourced direct from Korea. Machinists, fabricators, and layout technicians rely on this type of tool to mark, check, and transfer angles with precision during metal fabrication, woodworking, and general workshop tasks. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The BlueTec BD-No.19B Steel Ruler Protractor is a combination measuring and angle-marking tool sourced direct from Korea. Steel ruler protractors like this are commonly used in metalworking, fabrication, and woodworking shops to measure linear dimensions and set precise angles during layout and scribing tasks. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The BlueTec BD-PB300 Steel Ruler Plumb Bob is a dual-function measuring tool combining a steel rule with a plumb bob for quick vertical alignment checks, sourced direct from Korea. Commonly used in construction, carpentry, and general layout work, it allows tradespeople to confirm plumb lines and take linear measurements with a single compact instrument. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The BlueTec BD-PT60950 Steel Ruler Micrometer is a precision hand measurement tool combining ruler and micrometer functionality, sourced direct from Korea. Machinists, toolmakers, and quality control technicians rely on this type of instrument for accurate linear measurements in workshop, production floor, and inspection environments. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

BlueTec BD-SB200 Steel Ruler delivers precise linear measurement for workshop and layout tasks, sourced direct from Korea. Steel rules are a standard hand tool across fabrication, machining, and carpentry for scribing lines, checking dimensions, and guiding cuts. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

BlueTec BD-SL11T Steel Ruler Try Square delivers precise 90-degree reference angles for layout and inspection work, sourced direct from Korea. Machinists, carpenters, and fabricators rely on try squares to verify squareness on workpieces, mark perpendicular cut lines, and check assembled components for true right angles. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

BlueTec BD-SQ150B Steel Ruler Right Angle Square with black painted finish delivers precise 90-degree reference and straight-edge measurement, sourced direct from Korea. Machinists, fabricators, and woodworkers rely on steel squares like this to verify squareness, mark layout lines, and check perpendicularity across metal, wood, and composite workpieces. Request a quote today for export-ready supply, competitive bulk pricing, and dependable fulfillment through a KITA-registered Korean exporter.

BlueTec BD-SQ300 Steel Ruler Right Angle Square in a matte finish delivers precise 90-degree reference and straight-edge measurement, sourced direct from Korea. Machinists, fabricators, and woodworkers rely on steel squares like this to verify squareness during layout, assembly, and quality inspection across metal and woodworking applications. Request a quote today for export-ready supply of this and other BlueTec measuring tools at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The BlueTec BD-SQ300B Steel Ruler Right Angle Square with black painted finish is a precision layout and marking tool sourced direct from Korea. Steel squares of this type are essential for woodworkers, metalworkers, and fabricators who need reliable 90-degree reference points when scribing lines, checking squareness, or setting up workpieces. Request a quote today to access export-ready supply, competitive pricing, and the assurance of ordering through a KITA-registered Korean exporter.