🔍 Can't find your part? We source far beyond this catalog — list any MRO part, even if it's not listed here, and we'll quote it direct from Korean makers.

Servo Pumps

6 products servo-pumps ✕

[Yuken] — AMSR Controller for ASR Series AC Servo Pumps

AMSR Controller. Used to drive Yuken ASR series AC servo motor driven pumps; optimally designed for ASR pump drive to maximize pump performance (included with the ASR series pump). Command signal input 0 to +10V DC, 8ch sequence input / 6ch sequence output. Amplifier capacity codes C/DE/FGI/HJL/KMO. Configured-to-order (RFQ): supply voltage (2 AC200V / 4 AC400V), function select (A standalone / B summation), parameter number.

Brand: Yuken Category: Controllers 5 models

Product Code	Description	Brand	Spec
AMSR-C-00-10	AMSR controller C (5.0kW), for ASR1 (C), ASR2 (C)	Yuken	Amplifier Capacity Code: C (5.0 kW) \| Command Signal Input: 0 to +10V DC, input impedance 10 kohm \| Monitor Output: 0 to +10V DC \| Sequence I/O: 8ch photocoupler input / 6ch open-collector output \| Main Circuit Power: 3-phase AC200V / AC400V 50/60Hz (200V: AC170-253V, 400V: AC323-528V, freq +/-5%) \| Power Supply Capacity: 6.8 kVA \| Regenerative Resistor (DB): Built-in \| Cooling: Forced air-cooled, open (IP00) \| Ambient: 0 to +50C (no freezing), <=90%RH (no condensation) \| Protection: Overcurrent / servo-motor overheat / undervoltage / excessive-error / regen overvoltage / encoder fault / momentary power-loss / overload / regen fault / overspeed \| Mass (approx): 4.6 kg \| Applicable Pumps: ASR1 (C), ASR2 (C) \| Design No: 10 \| Options: Supply voltage (2 AC200V / 4 AC400V; DE = AC200V only), function select (A standalone / B summation), parameter number = RFQ
AMSR-DE-00-10	AMSR controller DE (7.0kW), for ASR3 (E)	Yuken	Amplifier Capacity Code: DE (7.0 kW) \| Command Signal Input: 0 to +10V DC, input impedance 10 kohm \| Monitor Output: 0 to +10V DC \| Sequence I/O: 8ch photocoupler input / 6ch open-collector output \| Main Circuit Power: 3-phase AC200V 50/60Hz (200V: AC170-253V, 400V: AC323-528V, freq +/-5%) \| Power Supply Capacity: 8.6 kVA \| Regenerative Resistor (DB): Built-in \| Cooling: Forced air-cooled, open (IP00) \| Ambient: 0 to +50C (no freezing), <=90%RH (no condensation) \| Protection: Overcurrent / servo-motor overheat / undervoltage / excessive-error / regen overvoltage / encoder fault / momentary power-loss / overload / regen fault / overspeed \| Mass (approx): 6.2 kg \| Applicable Pumps: ASR3 (E) \| Design No: 10 \| Options: Supply voltage (2 AC200V / 4 AC400V; DE = AC200V only), function select (A standalone / B summation), parameter number = RFQ
AMSR-FGI-00-10	AMSR controller FGI (11.0kW), for ASR3 (G), ASR5 (G)	Yuken	Amplifier Capacity Code: FGI (11.0 kW) \| Command Signal Input: 0 to +10V DC, input impedance 10 kohm \| Monitor Output: 0 to +10V DC \| Sequence I/O: 8ch photocoupler input / 6ch open-collector output \| Main Circuit Power: 3-phase AC200V / AC400V 50/60Hz (200V: AC170-253V, 400V: AC323-528V, freq +/-5%) \| Power Supply Capacity: 12 kVA \| Regenerative Resistor (DB): External \| Cooling: Forced air-cooled, open (IP00) \| Ambient: 0 to +50C (no freezing), <=90%RH (no condensation) \| Protection: Overcurrent / servo-motor overheat / undervoltage / excessive-error / regen overvoltage / encoder fault / momentary power-loss / overload / regen fault / overspeed \| Mass (approx): 18 kg \| Applicable Pumps: ASR3 (G), ASR5 (G) \| Design No: 10 \| Options: Supply voltage (2 AC200V / 4 AC400V; DE = AC200V only), function select (A standalone / B summation), parameter number = RFQ
AMSR-HJL-00-10	AMSR controller HJL (15.0kW), for ASR5 (J), ASR10 (J)	Yuken	Amplifier Capacity Code: HJL (15.0 kW) \| Command Signal Input: 0 to +10V DC, input impedance 10 kohm \| Monitor Output: 0 to +10V DC \| Sequence I/O: 8ch photocoupler input / 6ch open-collector output \| Main Circuit Power: 3-phase AC200V / AC400V 50/60Hz (200V: AC170-253V, 400V: AC323-528V, freq +/-5%) \| Power Supply Capacity: 16 kVA \| Regenerative Resistor (DB): External \| Cooling: Forced air-cooled, open (IP00) \| Ambient: 0 to +50C (no freezing), <=90%RH (no condensation) \| Protection: Overcurrent / servo-motor overheat / undervoltage / excessive-error / regen overvoltage / encoder fault / momentary power-loss / overload / regen fault / overspeed \| Mass (approx): 18 kg \| Applicable Pumps: ASR5 (J), ASR10 (J) \| Design No: 10 \| Options: Supply voltage (2 AC200V / 4 AC400V; DE = AC200V only), function select (A standalone / B summation), parameter number = RFQ
AMSR-KMO-00-10	AMSR controller KMO (22.0kW), for ASR10 (M)	Yuken	Amplifier Capacity Code: KMO (22.0 kW) \| Command Signal Input: 0 to +10V DC, input impedance 10 kohm \| Monitor Output: 0 to +10V DC \| Sequence I/O: 8ch photocoupler input / 6ch open-collector output \| Main Circuit Power: 3-phase AC200V / AC400V 50/60Hz (200V: AC170-253V, 400V: AC323-528V, freq +/-5%) \| Power Supply Capacity: 22 kVA \| Regenerative Resistor (DB): External \| Cooling: Forced air-cooled, open (IP00) \| Ambient: 0 to +50C (no freezing), <=90%RH (no condensation) \| Protection: Overcurrent / servo-motor overheat / undervoltage / excessive-error / regen overvoltage / encoder fault / momentary power-loss / overload / regen fault / overspeed \| Mass (approx): 19 kg \| Applicable Pumps: ASR10 (M) \| Design No: 10 \| Options: Supply voltage (2 AC200V / 4 AC400V; DE = AC200V only), function select (A standalone / B summation), parameter number = RFQ

[Yuken] — ASR1 AC Servo Motor Driven Pump (4.5 kW, 39.5 L/min, 21 MPa)

'ASR' Series AC Servo Motor Driven Pumps (ASR1). Max flow: 39.5 L/min. Max working pressure: 21 MPa. AC servo motor output: 4.5 kW. Available in 1-displacement and 2-displacement types. Flow/pressure controlled to high precision by the dedicated AMSR controller. Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number.

Brand: Yuken Category: Servo Pumps 2 models

Product Code	Description	Brand	Spec
ASR1-C-HX-12	ASR1 servo pump, 4.5kW, 1-displacement (single), 21 MPa	Yuken	Series: ASR1 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: C (4.5 kW) \| Displacement Type: X = 1-displacement (single) \| Max Flow: 39.5 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 31.6 L/min/5V (max 39.5 L/min/6.25V) \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 4.5 kW \| Insulation Class: F \| Cooling: Totally enclosed, self-cooled \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 54 kg \| Matched Controller: AMSR-C series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)
ASR1-C-HW-12	ASR1 servo pump, 4.5kW, 2-displacement (dual), 21 MPa	Yuken	Series: ASR1 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: C (4.5 kW) \| Displacement Type: W = 2-displacement (dual) \| Max Flow: 39.5 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 31.6 L/min/5V (max 39.5 L/min/6.25V) \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 4.5 kW \| Insulation Class: F \| Cooling: Totally enclosed, self-cooled \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 55 kg \| Matched Controller: AMSR-C series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)

[Yuken] — ASR10 AC Servo Motor Driven Pump (11/15 kW, 200 L/min, 21 MPa)

'ASR' Series AC Servo Motor Driven Pumps (ASR10). Max flow: 200 L/min. Max working pressure: 21 MPa. AC servo motor output: 11/15 kW. Available in 1-displacement and 2-displacement types. Flow/pressure controlled to high precision by the dedicated AMSR controller. Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number.

Brand: Yuken Category: Servo Pumps 4 models

Product Code	Description	Brand	Spec
ASR10-J-HX-12	ASR10 servo pump, 11kW, 1-displacement (single), 21 MPa	Yuken	Series: ASR10 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: J (11 kW) \| Displacement Type: X = 1-displacement (single) \| Max Flow: 200 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 200 L/min/5V \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 11 kW \| Insulation Class: F \| Cooling: Totally enclosed, forced air-cooled (fan 62W@50Hz / 76W@60Hz) \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 213 kg \| Matched Controller: AMSR-HJL series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)
ASR10-J-HW-12	ASR10 servo pump, 11kW, 2-displacement (dual), 21 MPa	Yuken	Series: ASR10 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: J (11 kW) \| Displacement Type: W = 2-displacement (dual) \| Max Flow: 200 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 200 L/min/5V \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 11 kW \| Insulation Class: F \| Cooling: Totally enclosed, forced air-cooled (fan 62W@50Hz / 76W@60Hz) \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 214 kg \| Matched Controller: AMSR-HJL series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)
ASR10-M-HX-12	ASR10 servo pump, 15kW, 1-displacement (single), 21 MPa	Yuken	Series: ASR10 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: M (15 kW) \| Displacement Type: X = 1-displacement (single) \| Max Flow: 200 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 200 L/min/5V \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 15 kW \| Insulation Class: F \| Cooling: Totally enclosed, forced air-cooled (fan 62W@50Hz / 76W@60Hz) \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 233 kg \| Matched Controller: AMSR-KMO series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)
ASR10-M-HW-12	ASR10 servo pump, 15kW, 2-displacement (dual), 21 MPa	Yuken	Series: ASR10 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: M (15 kW) \| Displacement Type: W = 2-displacement (dual) \| Max Flow: 200 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 200 L/min/5V \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 15 kW \| Insulation Class: F \| Cooling: Totally enclosed, forced air-cooled (fan 62W@50Hz / 76W@60Hz) \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 234 kg \| Matched Controller: AMSR-KMO series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)

[Yuken] — ASR2 AC Servo Motor Driven Pump (4.5 kW, 55.5 L/min, 16 MPa)

'ASR' Series AC Servo Motor Driven Pumps (ASR2). Max flow: 55.5 L/min. Max working pressure: 16 MPa. AC servo motor output: 4.5 kW. Available in 1-displacement and 2-displacement types. Flow/pressure controlled to high precision by the dedicated AMSR controller. Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number.

Brand: Yuken Category: Servo Pumps 2 models

Product Code	Description	Brand	Spec
ASR2-C-CX-12	ASR2 servo pump, 4.5kW, 1-displacement (single), 16 MPa	Yuken	Series: ASR2 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: C (4.5 kW) \| Displacement Type: X = 1-displacement (single) \| Max Flow: 55.5 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 44.4 L/min/5V (max 55.5 L/min/6.25V) \| Max Working Pressure: 16 MPa (code C) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 16 MPa/4.57V \| AC Servo Motor Output: 4.5 kW \| Insulation Class: F \| Cooling: Totally enclosed, self-cooled \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 54 kg \| Matched Controller: AMSR-C series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)
ASR2-C-CW-12	ASR2 servo pump, 4.5kW, 2-displacement (dual), 16 MPa	Yuken	Series: ASR2 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: C (4.5 kW) \| Displacement Type: W = 2-displacement (dual) \| Max Flow: 55.5 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 44.4 L/min/5V (max 55.5 L/min/6.25V) \| Max Working Pressure: 16 MPa (code C) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 16 MPa/4.57V \| AC Servo Motor Output: 4.5 kW \| Insulation Class: F \| Cooling: Totally enclosed, self-cooled \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 55 kg \| Matched Controller: AMSR-C series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)

[Yuken] — ASR3 AC Servo Motor Driven Pump (6/8 kW, 92.2 L/min, 21 MPa)

'ASR' Series AC Servo Motor Driven Pumps (ASR3). Max flow: 92.2 L/min. Max working pressure: 21 MPa. AC servo motor output: 6/8 kW. Available in 1-displacement and 2-displacement types. Flow/pressure controlled to high precision by the dedicated AMSR controller. Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number.

Brand: Yuken Category: Servo Pumps 4 models

Product Code	Description	Brand	Spec
ASR3-E-HX-12	ASR3 servo pump, 6kW, 1-displacement (single), 21 MPa	Yuken	Series: ASR3 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: E (6 kW) \| Displacement Type: X = 1-displacement (single) \| Max Flow: 92.2 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 73.8 L/min/5V (max 92.2 L/min/6.25V) \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 6 kW \| Insulation Class: F \| Cooling: Totally enclosed, self-cooled \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 80 kg \| Matched Controller: AMSR-DE series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)
ASR3-E-HW-12	ASR3 servo pump, 6kW, 2-displacement (dual), 21 MPa	Yuken	Series: ASR3 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: E (6 kW) \| Displacement Type: W = 2-displacement (dual) \| Max Flow: 92.2 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 73.8 L/min/5V (max 92.2 L/min/6.25V) \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 6 kW \| Insulation Class: F \| Cooling: Totally enclosed, self-cooled \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 82 kg \| Matched Controller: AMSR-DE series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)
ASR3-G-HX-12	ASR3 servo pump, 8kW, 1-displacement (single), 21 MPa	Yuken	Series: ASR3 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: G (8 kW) \| Displacement Type: X = 1-displacement (single) \| Max Flow: 92.2 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 73.8 L/min/5V (max 92.2 L/min/6.25V) \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 8 kW \| Insulation Class: F \| Cooling: Totally enclosed, self-cooled \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 87 kg \| Matched Controller: AMSR-FGI series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)
ASR3-G-HW-12	ASR3 servo pump, 8kW, 2-displacement (dual), 21 MPa	Yuken	Series: ASR3 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: G (8 kW) \| Displacement Type: W = 2-displacement (dual) \| Max Flow: 92.2 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 73.8 L/min/5V (max 92.2 L/min/6.25V) \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 8 kW \| Insulation Class: F \| Cooling: Totally enclosed, self-cooled \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 89 kg \| Matched Controller: AMSR-FGI series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)

[Yuken] — ASR5 AC Servo Motor Driven Pump (8/11 kW, 129.3 L/min, 21 MPa)

'ASR' Series AC Servo Motor Driven Pumps (ASR5). Max flow: 129.3 L/min. Max working pressure: 21 MPa. AC servo motor output: 8/11 kW. Available in 1-displacement and 2-displacement types. Flow/pressure controlled to high precision by the dedicated AMSR controller. Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number.

Brand: Yuken Category: Servo Pumps 4 models

Product Code	Description	Brand	Spec
ASR5-G-HX-12	ASR5 servo pump, 8kW, 1-displacement (single), 21 MPa	Yuken	Series: ASR5 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: G (8 kW) \| Displacement Type: X = 1-displacement (single) \| Max Flow: 129.3 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 112.4 L/min/5V (max 129.3 L/min/5.75V) \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 8 kW \| Insulation Class: F \| Cooling: Totally enclosed, self-cooled \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 94 kg \| Matched Controller: AMSR-FGI series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)
ASR5-G-HW-12	ASR5 servo pump, 8kW, 2-displacement (dual), 21 MPa	Yuken	Series: ASR5 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: G (8 kW) \| Displacement Type: W = 2-displacement (dual) \| Max Flow: 129.3 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 112.4 L/min/5V (max 129.3 L/min/5.75V) \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 8 kW \| Insulation Class: F \| Cooling: Totally enclosed, self-cooled \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 96 kg \| Matched Controller: AMSR-FGI series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)
ASR5-J-HX-12	ASR5 servo pump, 11kW, 1-displacement (single), 21 MPa	Yuken	Series: ASR5 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: J (11 kW) \| Displacement Type: X = 1-displacement (single) \| Max Flow: 129.3 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 112.4 L/min/5V (max 129.3 L/min/5.75V) \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 11 kW \| Insulation Class: F \| Cooling: Totally enclosed, forced air-cooled (fan 62W@50Hz / 76W@60Hz) \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 175.5 kg \| Matched Controller: AMSR-HJL series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)
ASR5-J-HW-12	ASR5 servo pump, 11kW, 2-displacement (dual), 21 MPa	Yuken	Series: ASR5 \| Type: AC Servo Motor Driven Piston Pump (system: pump + AMSR controller + regenerative resistor) \| Power Capacity Code: J (11 kW) \| Displacement Type: W = 2-displacement (dual) \| Max Flow: 129.3 L/min \| Min Control Flow: 1% \| Flow Hysteresis/Repeatability: <=1% / <=1% \| Flow Command Signal: 112.4 L/min/5V (max 129.3 L/min/5.75V) \| Max Working Pressure: 21 MPa (code H) \| Min Adjustable Pressure: 0.1 MPa \| Pressure Command Signal: 17.5 MPa/5V (max 21 MPa/6V) \| AC Servo Motor Output: 11 kW \| Insulation Class: F \| Cooling: Totally enclosed, forced air-cooled (fan 62W@50Hz / 76W@60Hz) \| Ambient: 0 to +40C (no freezing), <=80%RH (no condensation) \| Mass (approx): 177.5 kg \| Matched Controller: AMSR-HJL series \| Design No: 12 \| Options: Configured-to-order (RFQ): supply voltage (no-code AC200V / 4 AC400V), port direction, solenoid valve coil voltage, electrical wiring type, function select (A standalone / B summation), parameter number \| Note: Maintenance/pump-only orders prefix 'N-' (function & parameter set to no-code)