🔍 Can't find your part? We source far beyond this catalog — list any MRO part, even if it's not listed here, and we'll quote it direct from Korean makers.

Gearheads

20 products gearheads ✕

[GGM] — K10H□B Gearhead for □104 200W Geared Motors (□104mm, 1/3–1/200, No Decimal, Cap 40 N·m, ø18 Tapped Keyed Shaft)

GGM K10H-B parallel-shaft gearhead for □104mm 200W GGM geared motors, sold separately. 24 gear ratios 1/3–1/200 (no decimal gearhead), ø18 (h7) keyed output shaft with M6×P1.0 tap hole, mounting 4-ø8.5 / ø120 B.C. / M8 P1.25, max permissible torque 40 N·m / 400 kgf·cm.

Brand: GGM Category: Gearheads 24 models

Product Code	Description	Brand	Spec
K10H3B	GGM K10H gearhead K10H3B — ratio 1/3, output 500/600 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/3 \| Output Speed: 500 rpm @50Hz / 600 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H3.6B	GGM K10H gearhead K10H3.6B — ratio 1/3.6, output 416/500 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/3.6 \| Output Speed: 416 rpm @50Hz / 500 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H5B	GGM K10H gearhead K10H5B — ratio 1/5, output 300/360 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/5 \| Output Speed: 300 rpm @50Hz / 360 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H6B	GGM K10H gearhead K10H6B — ratio 1/6, output 250/300 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/6 \| Output Speed: 250 rpm @50Hz / 300 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H7.5B	GGM K10H gearhead K10H7.5B — ratio 1/7.5, output 200/240 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/7.5 \| Output Speed: 200 rpm @50Hz / 240 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H9B	GGM K10H gearhead K10H9B — ratio 1/9, output 166/200 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/9 \| Output Speed: 166 rpm @50Hz / 200 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H10B	GGM K10H gearhead K10H10B — ratio 1/10, output 150/180 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/10 \| Output Speed: 150 rpm @50Hz / 180 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H12.5B	GGM K10H gearhead K10H12.5B — ratio 1/12.5, output 120/144 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/12.5 \| Output Speed: 120 rpm @50Hz / 144 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H15B	GGM K10H gearhead K10H15B — ratio 1/15, output 100/120 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/15 \| Output Speed: 100 rpm @50Hz / 120 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H18B	GGM K10H gearhead K10H18B — ratio 1/18, output 83/100 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/18 \| Output Speed: 83 rpm @50Hz / 100 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H20B	GGM K10H gearhead K10H20B — ratio 1/20, output 75/90 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/20 \| Output Speed: 75 rpm @50Hz / 90 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H25B	GGM K10H gearhead K10H25B — ratio 1/25, output 60/72 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/25 \| Output Speed: 60 rpm @50Hz / 72 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H30B	GGM K10H gearhead K10H30B — ratio 1/30, output 50/60 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/30 \| Output Speed: 50 rpm @50Hz / 60 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H36B	GGM K10H gearhead K10H36B — ratio 1/36, output 41/50 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/36 \| Output Speed: 41 rpm @50Hz / 50 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H40B	GGM K10H gearhead K10H40B — ratio 1/40, output 37/45 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/40 \| Output Speed: 37 rpm @50Hz / 45 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H50B	GGM K10H gearhead K10H50B — ratio 1/50, output 30/36 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/50 \| Output Speed: 30 rpm @50Hz / 36 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H60B	GGM K10H gearhead K10H60B — ratio 1/60, output 25/30 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/60 \| Output Speed: 25 rpm @50Hz / 30 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H75B	GGM K10H gearhead K10H75B — ratio 1/75, output 20/24 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/75 \| Output Speed: 20 rpm @50Hz / 24 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H90B	GGM K10H gearhead K10H90B — ratio 1/90, output 16/20 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/90 \| Output Speed: 16 rpm @50Hz / 20 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H100B	GGM K10H gearhead K10H100B — ratio 1/100, output 15/18 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/100 \| Output Speed: 15 rpm @50Hz / 18 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H120B	GGM K10H gearhead K10H120B — ratio 1/120, output 13/15 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/120 \| Output Speed: 13 rpm @50Hz / 15 rpm @60Hz (4-pole AC input) [50Hz speed printed 13 — catalog anomaly, expected 12.5] \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H150B	GGM K10H gearhead K10H150B — ratio 1/150, output 10/12 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/150 \| Output Speed: 10 rpm @50Hz / 12 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H180B	GGM K10H gearhead K10H180B — ratio 1/180, output 8.3/10 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/180 \| Output Speed: 8.3 rpm @50Hz / 10 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm
K10H200B	GGM K10H gearhead K10H200B — ratio 1/200, output 7.5/9 rpm (50/60Hz), □104mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/200 \| Output Speed: 7.5 rpm @50Hz / 9 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 40 N·m / 400 kgf·cm

[GGM] — K10H□BTH Flat Hollow-Shaft Gearhead (for K10 200/400W Brushless Motor Unit, ø25 hollow, 1/5~1/100)

GGM K10H□BTH flat hollow-shaft gearhead for K10 200/400W brushless motor units, with ø25 hollow output bore (H8), ø94 pilot flange and M8×100 fixing bolt set (included). Deceleration ratios 1/5 to 1/100 (7 steps), allowed output torque up to 110 N·m, 85% efficiency; motor sold separately.

Brand: GGM Category: Gearheads 7 models

Product Code	Description	Brand	Spec
K10H5BTH	GGM K10H□BTH flat hollow-shaft gearhead, ratio 1/5, ø25 hollow bore, for K10 200/400W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K10 Brushless Motor Unit) \| Deceleration Ratio: 1/5 \| Output Speed Range: 20~600 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 2.8 N·m (200W) / 5.5 N·m (400W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1230 N (at 10mm from shaft end) \| Allowed Thrust Load: 800 N \| Output Shaft: ø25 hollow bore (H8), key type \| Flange: ø94 (h7), pilot ø58 (h8), P.C.D ø120 \| Fixing Bolt: M8 P1.25×100 (set included)
K10H10BTH	GGM K10H□BTH flat hollow-shaft gearhead, ratio 1/10, ø25 hollow bore, for K10 200/400W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K10 Brushless Motor Unit) \| Deceleration Ratio: 1/10 \| Output Speed Range: 10~300 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 5.5 N·m (200W) / 11.1 N·m (400W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1230 N (at 10mm from shaft end) \| Allowed Thrust Load: 800 N \| Output Shaft: ø25 hollow bore (H8), key type \| Flange: ø94 (h7), pilot ø58 (h8), P.C.D ø120 \| Fixing Bolt: M8 P1.25×100 (set included)
K10H15BTH	GGM K10H□BTH flat hollow-shaft gearhead, ratio 1/15, ø25 hollow bore, for K10 200/400W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K10 Brushless Motor Unit) \| Deceleration Ratio: 1/15 \| Output Speed Range: 6.7~200 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 8.3 N·m (200W) / 16.6 N·m (400W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1680 N (at 10mm from shaft end) \| Allowed Thrust Load: 800 N \| Output Shaft: ø25 hollow bore (H8), key type \| Flange: ø94 (h7), pilot ø58 (h8), P.C.D ø120 \| Fixing Bolt: M8 P1.25×100 (set included)
K10H20BTH	GGM K10H□BTH flat hollow-shaft gearhead, ratio 1/20, ø25 hollow bore, for K10 200/400W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K10 Brushless Motor Unit) \| Deceleration Ratio: 1/20 \| Output Speed Range: 5~150 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 11.1 N·m (200W) / 22.1 N·m (400W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1680 N (at 10mm from shaft end) \| Allowed Thrust Load: 800 N \| Output Shaft: ø25 hollow bore (H8), key type \| Flange: ø94 (h7), pilot ø58 (h8), P.C.D ø120 \| Fixing Bolt: M8 P1.25×100 (set included)
K10H30BTH	GGM K10H□BTH flat hollow-shaft gearhead, ratio 1/30, ø25 hollow bore, for K10 200/400W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K10 Brushless Motor Unit) \| Deceleration Ratio: 1/30 \| Output Speed Range: 3.3~100 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 16.6 N·m (200W) / 33.2 N·m (400W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 2040 N (at 10mm from shaft end) \| Allowed Thrust Load: 800 N \| Output Shaft: ø25 hollow bore (H8), key type \| Flange: ø94 (h7), pilot ø58 (h8), P.C.D ø120 \| Fixing Bolt: M8 P1.25×100 (set included)
K10H50BTH	GGM K10H□BTH flat hollow-shaft gearhead, ratio 1/50, ø25 hollow bore, for K10 200/400W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K10 Brushless Motor Unit) \| Deceleration Ratio: 1/50 \| Output Speed Range: 2~60 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 27.6 N·m (200W) / 55.3 N·m (400W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 2040 N (at 10mm from shaft end) \| Allowed Thrust Load: 800 N \| Output Shaft: ø25 hollow bore (H8), key type \| Flange: ø94 (h7), pilot ø58 (h8), P.C.D ø120 \| Fixing Bolt: M8 P1.25×100 (set included)
K10H100BTH	GGM K10H□BTH flat hollow-shaft gearhead, ratio 1/100, ø25 hollow bore, for K10 200/400W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K10 Brushless Motor Unit) \| Deceleration Ratio: 1/100 \| Output Speed Range: 1~30 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 55.3 N·m (200W) / 110 N·m (400W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 2040 N (at 10mm from shaft end) \| Allowed Thrust Load: 800 N \| Output Shaft: ø25 hollow bore (H8), key type \| Flange: ø94 (h7), pilot ø58 (h8), P.C.D ø120 \| Fixing Bolt: M8 P1.25×100 (set included)

[GGM] — K6G Gearhead for □60 Motors (1/3–1/250, max 3 N·m / 30 kgf·cm)

GGM K6G parallel-shaft gearhead for □60 K6 AC-induction and K6D DC motors, 25 gear ratios from 1/3 to 1/250 plus a K6G10BX 1/10 decimal gearhead. Max permissible output torque 3 N·m (30 kgf·cm); output speed = motor speed ÷ ratio. Sold separately.

Brand: GGM Category: Gearheads 26 models

Product Code	Description	Brand	Spec
K6G3B	K6G gearhead, 1/3, output 500/600 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/3 \| Output Speed (4-pole AC input): 500 rpm (50Hz) / 600 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G3.6B	K6G gearhead, 1/3.6, output 416/500 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/3.6 \| Output Speed (4-pole AC input): 416 rpm (50Hz) / 500 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G5B	K6G gearhead, 1/5, output 300/360 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/5 \| Output Speed (4-pole AC input): 300 rpm (50Hz) / 360 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G6B	K6G gearhead, 1/6, output 250/300 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/6 \| Output Speed (4-pole AC input): 250 rpm (50Hz) / 300 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G7.5B	K6G gearhead, 1/7.5, output 200/240 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/7.5 \| Output Speed (4-pole AC input): 200 rpm (50Hz) / 240 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G9B	K6G gearhead, 1/9, output 166/200 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/9 \| Output Speed (4-pole AC input): 166 rpm (50Hz) / 200 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G10B	K6G gearhead, 1/10, output 150/180 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/10 \| Output Speed (4-pole AC input): 150 rpm (50Hz) / 180 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G12.5B	K6G gearhead, 1/12.5, output 120/144 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/12.5 \| Output Speed (4-pole AC input): 120 rpm (50Hz) / 144 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G15B	K6G gearhead, 1/15, output 100/120 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/15 \| Output Speed (4-pole AC input): 100 rpm (50Hz) / 120 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G18B	K6G gearhead, 1/18, output 83/100 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/18 \| Output Speed (4-pole AC input): 83 rpm (50Hz) / 100 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G20B	K6G gearhead, 1/20, output 75/90 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/20 \| Output Speed (4-pole AC input): 75 rpm (50Hz) / 90 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G25B	K6G gearhead, 1/25, output 60/72 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/25 \| Output Speed (4-pole AC input): 60 rpm (50Hz) / 72 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G30B	K6G gearhead, 1/30, output 50/60 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/30 \| Output Speed (4-pole AC input): 50 rpm (50Hz) / 60 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G36B	K6G gearhead, 1/36, output 41/50 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/36 \| Output Speed (4-pole AC input): 41 rpm (50Hz) / 50 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G40B	K6G gearhead, 1/40, output 37/45 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/40 \| Output Speed (4-pole AC input): 37 rpm (50Hz) / 45 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G50B	K6G gearhead, 1/50, output 30/36 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/50 \| Output Speed (4-pole AC input): 30 rpm (50Hz) / 36 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G60B	K6G gearhead, 1/60, output 25/30 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/60 \| Output Speed (4-pole AC input): 25 rpm (50Hz) / 30 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G75B	K6G gearhead, 1/75, output 20/24 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/75 \| Output Speed (4-pole AC input): 20 rpm (50Hz) / 24 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G90B	K6G gearhead, 1/90, output 16/20 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/90 \| Output Speed (4-pole AC input): 16 rpm (50Hz) / 20 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G100B	K6G gearhead, 1/100, output 15/18 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/100 \| Output Speed (4-pole AC input): 15 rpm (50Hz) / 18 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G120B	K6G gearhead, 1/120, output 12.5/15 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/120 \| Output Speed (4-pole AC input): 12.5 rpm (50Hz) / 15 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G150B	K6G gearhead, 1/150, output 10/12 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/150 \| Output Speed (4-pole AC input): 10 rpm (50Hz) / 12 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G180B	K6G gearhead, 1/180, output 8.3/10 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/180 \| Output Speed (4-pole AC input): 8.3 rpm (50Hz) / 10 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G200B	K6G gearhead, 1/200, output 7.5/9 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/200 \| Output Speed (4-pole AC input): 7.5 rpm (50Hz) / 9 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G250B	K6G gearhead, 1/250, output 6/7.2 rpm @ 50/60Hz (4-pole AC), max 30 kgf·cm	GGM	Gear Ratio: 1/250 \| Output Speed (4-pole AC input): 6 rpm (50Hz) / 7.2 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm)
K6G10BX	K6G10BX decimal gearhead, 1/10, in-line between motor and gearhead, max 30 kgf·cm	GGM	Gear Ratio: 1/10 (decimal, in-line) \| Output Speed (4-pole AC input): 150 rpm (50Hz) / 180 rpm (60Hz) \| Max Permissible Output Torque: 3 N·m (30 kgf·cm) \| Use: mounted between motor and gearhead to extend reduction range

[GGM] — K6H□B Solid-Shaft Gearhead (for K6 30W Brushless Motor Unit, ø10 solid, 1/5~1/200)

GGM K6H□B inline solid-shaft gearhead for K6 30W brushless AC/DC motor units, with ø10 keyed output shaft and □60 flange (ø70 P.C.D). Deceleration ratios 1/5 to 1/200 (8 steps), allowed output torque up to 6 N·m, 81–90% efficiency; motor sold separately.

Brand: GGM Category: Gearheads 8 models

Product Code	Description	Brand	Spec
K6H5B	GGM K6H□B inline solid-shaft gearhead, ratio 1/5, ø10 keyed shaft, for K6 30W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/5 \| Output Speed Range: 20~600 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 0.45 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 90% \| Allowed Overhang Load: 100 N (at 10mm from shaft end) \| Allowed Thrust Load: 40 N \| Output Shaft: ø10 solid, key type \| Flange: □60, P.C.D ø70 \| Fixing Bolt: M4 P0.7×50 (set included)
K6H10B	GGM K6H□B inline solid-shaft gearhead, ratio 1/10, ø10 keyed shaft, for K6 30W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/10 \| Output Speed Range: 10~300 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 0.9 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 90% \| Allowed Overhang Load: 150 N (at 10mm from shaft end) \| Allowed Thrust Load: 40 N \| Output Shaft: ø10 solid, key type \| Flange: □60, P.C.D ø70 \| Fixing Bolt: M4 P0.7×50 (set included)
K6H15B	GGM K6H□B inline solid-shaft gearhead, ratio 1/15, ø10 keyed shaft, for K6 30W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/15 \| Output Speed Range: 6.7~200 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 1.4 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 90% \| Allowed Overhang Load: 150 N (at 10mm from shaft end) \| Allowed Thrust Load: 40 N \| Output Shaft: ø10 solid, key type \| Flange: □60, P.C.D ø70 \| Fixing Bolt: M4 P0.7×50 (set included)
K6H20B	GGM K6H□B inline solid-shaft gearhead, ratio 1/20, ø10 keyed shaft, for K6 30W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/20 \| Output Speed Range: 5~150 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 1.8 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 90% \| Allowed Overhang Load: 150 N (at 10mm from shaft end) \| Allowed Thrust Load: 40 N \| Output Shaft: ø10 solid, key type \| Flange: □60, P.C.D ø70 \| Fixing Bolt: M4 P0.7×50 (set included)
K6H30B	GGM K6H□B inline solid-shaft gearhead, ratio 1/30, ø10 keyed shaft, for K6 30W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/30 \| Output Speed Range: 3.3~100 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 2.6 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 86% \| Allowed Overhang Load: 200 N (at 10mm from shaft end) \| Allowed Thrust Load: 40 N \| Output Shaft: ø10 solid, key type \| Flange: □60, P.C.D ø70 \| Fixing Bolt: M4 P0.7×55 (set included)
K6H50B	GGM K6H□B inline solid-shaft gearhead, ratio 1/50, ø10 keyed shaft, for K6 30W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/50 \| Output Speed Range: 2~60 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 4.3 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 86% \| Allowed Overhang Load: 200 N (at 10mm from shaft end) \| Allowed Thrust Load: 40 N \| Output Shaft: ø10 solid, key type \| Flange: □60, P.C.D ø70 \| Fixing Bolt: M4 P0.7×55 (set included)
K6H100B	GGM K6H□B inline solid-shaft gearhead, ratio 1/100, ø10 keyed shaft, for K6 30W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/100 \| Output Speed Range: 1~30 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 6 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 86% \| Allowed Overhang Load: 200 N (at 10mm from shaft end) \| Allowed Thrust Load: 40 N \| Output Shaft: ø10 solid, key type \| Flange: □60, P.C.D ø70 \| Fixing Bolt: M4 P0.7×55 (set included)
K6H200B	GGM K6H□B inline solid-shaft gearhead, ratio 1/200, ø10 keyed shaft, for K6 30W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/200 \| Output Speed Range: 0.5~15 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 6 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 81% \| Allowed Overhang Load: 200 N (at 10mm from shaft end) \| Allowed Thrust Load: 40 N \| Output Shaft: ø10 solid, key type \| Flange: □60, P.C.D ø70 \| Fixing Bolt: M4 P0.7×60 (set included)

[GGM] — K6H□BTH Flat Hollow-Shaft Gearhead (for K6 30W Brushless Motor Unit, ø12 hollow, 1/5~1/200)

GGM K6H□BTH flat hollow-shaft gearhead for K6 30W brushless AC/DC motor units, with ø12 hollow output bore (H8), ø54 pilot flange and M5×65 fixing bolt set (included). Deceleration ratios 1/5 to 1/200 (8 steps), allowed output torque up to 17 N·m, 80–85% efficiency; motor sold separately.

Brand: GGM Category: Gearheads 8 models

Product Code	Description	Brand	Spec
K6H5BTH	GGM K6H□BTH flat hollow-shaft gearhead, ratio 1/5, ø12 hollow bore, for K6 30W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/5 \| Output Speed Range: 20~600 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 0.4 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 80% \| Allowed Overhang Load: 450 N (at 10mm from shaft end) \| Allowed Thrust Load: 200 N \| Output Shaft: ø12 hollow bore (H8), key type \| Flange: ø54 (h7), P.C.D ø70 \| Fixing Bolt: M5 P0.8×65 (set included)
K6H10BTH	GGM K6H□BTH flat hollow-shaft gearhead, ratio 1/10, ø12 hollow bore, for K6 30W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/10 \| Output Speed Range: 10~300 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 0.85 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 450 N (at 10mm from shaft end) \| Allowed Thrust Load: 200 N \| Output Shaft: ø12 hollow bore (H8), key type \| Flange: ø54 (h7), P.C.D ø70 \| Fixing Bolt: M5 P0.8×65 (set included)
K6H15BTH	GGM K6H□BTH flat hollow-shaft gearhead, ratio 1/15, ø12 hollow bore, for K6 30W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/15 \| Output Speed Range: 6.7~200 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 1.3 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 500 N (at 10mm from shaft end) \| Allowed Thrust Load: 200 N \| Output Shaft: ø12 hollow bore (H8), key type \| Flange: ø54 (h7), P.C.D ø70 \| Fixing Bolt: M5 P0.8×65 (set included)
K6H20BTH	GGM K6H□BTH flat hollow-shaft gearhead, ratio 1/20, ø12 hollow bore, for K6 30W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/20 \| Output Speed Range: 5~150 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 1.7 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 500 N (at 10mm from shaft end) \| Allowed Thrust Load: 200 N \| Output Shaft: ø12 hollow bore (H8), key type \| Flange: ø54 (h7), P.C.D ø70 \| Fixing Bolt: M5 P0.8×65 (set included)
K6H30BTH	GGM K6H□BTH flat hollow-shaft gearhead, ratio 1/30, ø12 hollow bore, for K6 30W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/30 \| Output Speed Range: 3.3~100 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 2.6 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 500 N (at 10mm from shaft end) \| Allowed Thrust Load: 200 N \| Output Shaft: ø12 hollow bore (H8), key type \| Flange: ø54 (h7), P.C.D ø70 \| Fixing Bolt: M5 P0.8×65 (set included)
K6H50BTH	GGM K6H□BTH flat hollow-shaft gearhead, ratio 1/50, ø12 hollow bore, for K6 30W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/50 \| Output Speed Range: 2~60 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 4.3 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 500 N (at 10mm from shaft end) \| Allowed Thrust Load: 200 N \| Output Shaft: ø12 hollow bore (H8), key type \| Flange: ø54 (h7), P.C.D ø70 \| Fixing Bolt: M5 P0.8×65 (set included)
K6H100BTH	GGM K6H□BTH flat hollow-shaft gearhead, ratio 1/100, ø12 hollow bore, for K6 30W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/100 \| Output Speed Range: 1~30 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 8.5 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 500 N (at 10mm from shaft end) \| Allowed Thrust Load: 200 N \| Output Shaft: ø12 hollow bore (H8), key type \| Flange: ø54 (h7), P.C.D ø70 \| Fixing Bolt: M5 P0.8×65 (set included)
K6H200BTH	GGM K6H□BTH flat hollow-shaft gearhead, ratio 1/200, ø12 hollow bore, for K6 30W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K6 Brushless Motor Unit) \| Deceleration Ratio: 1/200 \| Output Speed Range: 0.5~15 r/min (with K6BH 100-3000 r/min motor) \| Allowed Output Torque: 17 N·m (K6 30W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 500 N (at 10mm from shaft end) \| Allowed Thrust Load: 200 N \| Output Shaft: ø12 hollow bore (H8), key type \| Flange: ø54 (h7), P.C.D ø70 \| Fixing Bolt: M5 P0.8×65 (set included)

[GGM] — K7G Gearhead for □70 15W Geared Motors (□70mm, 1/3–1/200 + Decimal, Cap 5 N·m, ø10 Keyed Shaft)

GGM K7G parallel-shaft gearhead for □70mm 15W GGM geared motors (induction, reversible, brake, speed-control), sold separately from the motor. 24 gear ratios 1/3–1/200 plus decimal gearhead K7G10BX (1/10), ø10 (h7) keyed output shaft, max permissible torque 5 N·m / 50 kgf·cm.

Brand: GGM Category: Gearheads 25 models

Product Code	Description	Brand	Spec
K7G3B	GGM K7G gearhead K7G3B — ratio 1/3, output 500/600 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/3 \| Output Speed: 500 rpm @50Hz / 600 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G3.6B	GGM K7G gearhead K7G3.6B — ratio 1/3.6, output 416/500 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/3.6 \| Output Speed: 416 rpm @50Hz / 500 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G5B	GGM K7G gearhead K7G5B — ratio 1/5, output 300/360 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/5 \| Output Speed: 300 rpm @50Hz / 360 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G6B	GGM K7G gearhead K7G6B — ratio 1/6, output 250/300 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/6 \| Output Speed: 250 rpm @50Hz / 300 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G7.5B	GGM K7G gearhead K7G7.5B — ratio 1/7.5, output 200/240 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/7.5 \| Output Speed: 200 rpm @50Hz / 240 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G9B	GGM K7G gearhead K7G9B — ratio 1/9, output 166/200 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/9 \| Output Speed: 166 rpm @50Hz / 200 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G10B	GGM K7G gearhead K7G10B — ratio 1/10, output 150/180 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/10 \| Output Speed: 150 rpm @50Hz / 180 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G12.5B	GGM K7G gearhead K7G12.5B — ratio 1/12.5, output 120/144 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/12.5 \| Output Speed: 120 rpm @50Hz / 144 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G15B	GGM K7G gearhead K7G15B — ratio 1/15, output 100/120 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/15 \| Output Speed: 100 rpm @50Hz / 120 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G18B	GGM K7G gearhead K7G18B — ratio 1/18, output 83/100 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/18 \| Output Speed: 83 rpm @50Hz / 100 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G20B	GGM K7G gearhead K7G20B — ratio 1/20, output 75/90 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/20 \| Output Speed: 75 rpm @50Hz / 90 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G25B	GGM K7G gearhead K7G25B — ratio 1/25, output 60/72 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/25 \| Output Speed: 60 rpm @50Hz / 72 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G30B	GGM K7G gearhead K7G30B — ratio 1/30, output 50/60 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/30 \| Output Speed: 50 rpm @50Hz / 60 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G36B	GGM K7G gearhead K7G36B — ratio 1/36, output 41/50 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/36 \| Output Speed: 41 rpm @50Hz / 50 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G40B	GGM K7G gearhead K7G40B — ratio 1/40, output 37/45 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/40 \| Output Speed: 37 rpm @50Hz / 45 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G50B	GGM K7G gearhead K7G50B — ratio 1/50, output 30/36 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/50 \| Output Speed: 30 rpm @50Hz / 36 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G60B	GGM K7G gearhead K7G60B — ratio 1/60, output 25/30 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/60 \| Output Speed: 25 rpm @50Hz / 30 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G75B	GGM K7G gearhead K7G75B — ratio 1/75, output 20/24 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/75 \| Output Speed: 20 rpm @50Hz / 24 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G90B	GGM K7G gearhead K7G90B — ratio 1/90, output 16/20 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/90 \| Output Speed: 16 rpm @50Hz / 20 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G100B	GGM K7G gearhead K7G100B — ratio 1/100, output 15/18 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/100 \| Output Speed: 15 rpm @50Hz / 18 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G120B	GGM K7G gearhead K7G120B — ratio 1/120, output 12.5/15 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/120 \| Output Speed: 12.5 rpm @50Hz / 15 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G150B	GGM K7G gearhead K7G150B — ratio 1/150, output 10/12 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/150 \| Output Speed: 10 rpm @50Hz / 12 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G180B	GGM K7G gearhead K7G180B — ratio 1/180, output 8.3/10 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/180 \| Output Speed: 8.3 rpm @50Hz / 10 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G200B	GGM K7G gearhead K7G200B — ratio 1/200, output 7.5/9 rpm (50/60Hz), □70mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/200 \| Output Speed: 7.5 rpm @50Hz / 9 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 5 N·m / 50 kgf·cm
K7G10BX	GGM K7G decimal gearhead K7G10BX — 1/10 sub-ratio, ø6 output, □70mm	GGM	Type: Decimal Gearhead \| Gear Ratio: 1/10 (sub-ratio) \| Output Shaft: ø6 (h7) \| Max Permissible Torque: 5 N·m / 50 kgf·cm \| Note: Installed between motor and gearhead for ratios finer than 1/3

[GGM] — K8G Gearhead for □80 25/40W Geared Motors (□80mm, 1/3–1/250 + Decimal, Cap 8 N·m, ø10 Keyed Shaft)

GGM K8G parallel-shaft gearhead for □80mm 25W/40W GGM geared motors (induction, reversible, brake, speed-control), sold separately from the motor. 25 gear ratios 1/3–1/250 plus decimal gearhead K8G10BX (1/10), ø10 (h7) keyed output shaft, max permissible torque 8 N·m / 80 kgf·cm.

Brand: GGM Category: Gearheads 26 models

Product Code	Description	Brand	Spec
K8G3B	GGM K8G gearhead K8G3B — ratio 1/3, output 500/600 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/3 \| Output Speed: 500 rpm @50Hz / 600 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G3.6B	GGM K8G gearhead K8G3.6B — ratio 1/3.6, output 416/500 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/3.6 \| Output Speed: 416 rpm @50Hz / 500 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G5B	GGM K8G gearhead K8G5B — ratio 1/5, output 300/360 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/5 \| Output Speed: 300 rpm @50Hz / 360 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G6B	GGM K8G gearhead K8G6B — ratio 1/6, output 250/300 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/6 \| Output Speed: 250 rpm @50Hz / 300 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G7.5B	GGM K8G gearhead K8G7.5B — ratio 1/7.5, output 200/240 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/7.5 \| Output Speed: 200 rpm @50Hz / 240 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G9B	GGM K8G gearhead K8G9B — ratio 1/9, output 166/200 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/9 \| Output Speed: 166 rpm @50Hz / 200 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G10B	GGM K8G gearhead K8G10B — ratio 1/10, output 150/180 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/10 \| Output Speed: 150 rpm @50Hz / 180 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G12.5B	GGM K8G gearhead K8G12.5B — ratio 1/12.5, output 120/144 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/12.5 \| Output Speed: 120 rpm @50Hz / 144 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G15B	GGM K8G gearhead K8G15B — ratio 1/15, output 100/120 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/15 \| Output Speed: 100 rpm @50Hz / 120 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G18B	GGM K8G gearhead K8G18B — ratio 1/18, output 83/100 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/18 \| Output Speed: 83 rpm @50Hz / 100 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G20B	GGM K8G gearhead K8G20B — ratio 1/20, output 75/90 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/20 \| Output Speed: 75 rpm @50Hz / 90 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G25B	GGM K8G gearhead K8G25B — ratio 1/25, output 60/72 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/25 \| Output Speed: 60 rpm @50Hz / 72 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G30B	GGM K8G gearhead K8G30B — ratio 1/30, output 50/60 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/30 \| Output Speed: 50 rpm @50Hz / 60 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G36B	GGM K8G gearhead K8G36B — ratio 1/36, output 41/50 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/36 \| Output Speed: 41 rpm @50Hz / 50 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G40B	GGM K8G gearhead K8G40B — ratio 1/40, output 37/45 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/40 \| Output Speed: 37 rpm @50Hz / 45 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G50B	GGM K8G gearhead K8G50B — ratio 1/50, output 30/36 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/50 \| Output Speed: 30 rpm @50Hz / 36 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G60B	GGM K8G gearhead K8G60B — ratio 1/60, output 25/30 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/60 \| Output Speed: 25 rpm @50Hz / 30 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G75B	GGM K8G gearhead K8G75B — ratio 1/75, output 20/24 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/75 \| Output Speed: 20 rpm @50Hz / 24 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G90B	GGM K8G gearhead K8G90B — ratio 1/90, output 16/20 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/90 \| Output Speed: 16 rpm @50Hz / 20 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G100B	GGM K8G gearhead K8G100B — ratio 1/100, output 15/18 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/100 \| Output Speed: 15 rpm @50Hz / 18 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G120B	GGM K8G gearhead K8G120B — ratio 1/120, output 12.5/15 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/120 \| Output Speed: 12.5 rpm @50Hz / 15 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G150B	GGM K8G gearhead K8G150B — ratio 1/150, output 10/12 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/150 \| Output Speed: 10 rpm @50Hz / 12 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G180B	GGM K8G gearhead K8G180B — ratio 1/180, output 8.3/10 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/180 \| Output Speed: 8.3 rpm @50Hz / 10 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G200B	GGM K8G gearhead K8G200B — ratio 1/200, output 7.5/9 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/200 \| Output Speed: 7.5 rpm @50Hz / 9 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G250B	GGM K8G gearhead K8G250B — ratio 1/250, output 6/7.2 rpm (50/60Hz), □80mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/250 \| Output Speed: 6 rpm @50Hz / 7.2 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm
K8G10BX	GGM K8G decimal gearhead K8G10BX — 1/10 sub-ratio, □80mm	GGM	Type: Decimal Gearhead \| Gear Ratio: 1/10 (sub-ratio) \| Max Permissible Torque: 8 N·m / 80 kgf·cm (6 N·m / 60 kgf·cm with 1/25–1/40 gearhead) \| Note: Installed between motor and gearhead for ratios finer than 1/3

[GGM] — K8G□BRH Right-Angle Hollow-Shaft Gearhead for □80 25W Geared Motors (□80mm, 1/3–1/180, ø15 Hollow Bore, Cap 8 N·m)

GGM K8G-BRH right-angle hollow-shaft gearhead for □80mm 25W GGM geared motors, sold separately. ø15 (H8) keyed hollow output bore; output rotates opposite to the motor. 20 gear ratios 1/3–1/180 (no decimal gearhead), max permissible torque 8 N·m / 80 kgf·cm.

Brand: GGM Category: Gearheads 20 models

Product Code	Description	Brand	Spec
K8G3BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G3BRH — ratio 1/3, output 500/600 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/3 \| Output Speed: 500 rpm @50Hz / 600 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G3.6BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G3.6BRH — ratio 1/3.6, output 416/500 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/3.6 \| Output Speed: 416 rpm @50Hz / 500 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G5BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G5BRH — ratio 1/5, output 300/360 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/5 \| Output Speed: 300 rpm @50Hz / 360 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G6BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G6BRH — ratio 1/6, output 250/300 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/6 \| Output Speed: 250 rpm @50Hz / 300 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G7.5BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G7.5BRH — ratio 1/7.5, output 200/240 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/7.5 \| Output Speed: 200 rpm @50Hz / 240 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G9BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G9BRH — ratio 1/9, output 166/200 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/9 \| Output Speed: 166 rpm @50Hz / 200 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G12.5BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G12.5BRH — ratio 1/12.5, output 120/144 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/12.5 \| Output Speed: 120 rpm @50Hz / 144 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G15BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G15BRH — ratio 1/15, output 100/120 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/15 \| Output Speed: 100 rpm @50Hz / 120 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G18BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G18BRH — ratio 1/18, output 83/100 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/18 \| Output Speed: 83 rpm @50Hz / 100 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G25BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G25BRH — ratio 1/25, output 60/72 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/25 \| Output Speed: 60 rpm @50Hz / 72 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G30BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G30BRH — ratio 1/30, output 50/60 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/30 \| Output Speed: 50 rpm @50Hz / 60 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G36BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G36BRH — ratio 1/36, output 42/50 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/36 \| Output Speed: 42 rpm @50Hz / 50 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G50BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G50BRH — ratio 1/50, output 30/36 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/50 \| Output Speed: 30 rpm @50Hz / 36 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G60BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G60BRH — ratio 1/60, output 25/30 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/60 \| Output Speed: 25 rpm @50Hz / 30 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G75BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G75BRH — ratio 1/75, output 20/24 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/75 \| Output Speed: 20 rpm @50Hz / 24 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G90BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G90BRH — ratio 1/90, output 17/20 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/90 \| Output Speed: 17 rpm @50Hz / 20 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G100BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G100BRH — ratio 1/100, output 15/18 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/100 \| Output Speed: 15 rpm @50Hz / 18 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G120BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G120BRH — ratio 1/120, output 12.5/15 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/120 \| Output Speed: 12.5 rpm @50Hz / 15 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G150BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G150BRH — ratio 1/150, output 10/12 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/150 \| Output Speed: 10 rpm @50Hz / 12 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)
K8G180BRH	GGM K8G-BRH right-angle hollow-shaft gearhead K8G180BRH — ratio 1/180, output 8.3/10 rpm (50/60Hz), □80mm	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Gear Ratio: 1/180 \| Output Speed: 8.3 rpm @50Hz / 10 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 8 N·m / 80 kgf·cm \| Output Rotation: Opposite to motor (right-angle)

[GGM] — K8G□BRS Right-Angle Solid-Shaft Gearhead (□80, for 25W motor, 8 N·m, 1/3~1/180)

GGM K8G□BRS right-angle solid-shaft gearhead for □80 frame 25W induction motors, with ø10 keyed output shaft (h7) and M5 mounting bolts. Gear ratios 1/3 to 1/180 (20 steps), output speed 8.3–500 rpm, max permissible torque 8 N·m; motor sold separately.

Brand: GGM Category: Gearheads 20 models

Product Code	Description	Brand	Spec
K8G3BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/3, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/3 \| Output Speed: 500 rpm (50Hz) / 600 rpm (60Hz) \| Rated Torque: 0.28 N·m (50Hz) / 0.23 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G3.6BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/3.6, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/3.6 \| Output Speed: 416 rpm (50Hz) / 500 rpm (60Hz) \| Rated Torque: 0.33 N·m (50Hz) / 0.28 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G5BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/5, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/5 \| Output Speed: 300 rpm (50Hz) / 360 rpm (60Hz) \| Rated Torque: 0.46 N·m (50Hz) / 0.39 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G6BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/6, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/6 \| Output Speed: 250 rpm (50Hz) / 300 rpm (60Hz) \| Rated Torque: 0.56 N·m (50Hz) / 0.47 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G7.5BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/7.5, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/7.5 \| Output Speed: 200 rpm (50Hz) / 240 rpm (60Hz) \| Rated Torque: 0.69 N·m (50Hz) / 0.58 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G9BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/9, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/9 \| Output Speed: 166 rpm (50Hz) / 200 rpm (60Hz) \| Rated Torque: 0.83 N·m (50Hz) / 0.70 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G12.5BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/12.5, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/12.5 \| Output Speed: 120 rpm (50Hz) / 144 rpm (60Hz) \| Rated Torque: 1.57 N·m (50Hz) / 1.32 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G15BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/15, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/15 \| Output Speed: 100 rpm (50Hz) / 120 rpm (60Hz) \| Rated Torque: 1.89 N·m (50Hz) / 1.58 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G18BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/18, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/18 \| Output Speed: 83 rpm (50Hz) / 100 rpm (60Hz) \| Rated Torque: 2.26 N·m (50Hz) / 1.90 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G25BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/25, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/25 \| Output Speed: 60 rpm (50Hz) / 72 rpm (60Hz) \| Rated Torque: 3.15 N·m (50Hz) / 2.64 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G30BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/30, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/30 \| Output Speed: 50 rpm (50Hz) / 60 rpm (60Hz) \| Rated Torque: 3.77 N·m (50Hz) / 3.16 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G36BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/36, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/36 \| Output Speed: 42 rpm (50Hz) / 50 rpm (60Hz) \| Rated Torque: 4.53 N·m (50Hz) / 3.79 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G50BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/50, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/50 \| Output Speed: 30 rpm (50Hz) / 36 rpm (60Hz) \| Rated Torque: 6.29 N·m (50Hz) / 5.27 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G60BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/60, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/60 \| Output Speed: 25 rpm (50Hz) / 30 rpm (60Hz) \| Rated Torque: 7.55 N·m (50Hz) / 6.32 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G75BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/75, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/75 \| Output Speed: 20 rpm (50Hz) / 24 rpm (60Hz) \| Rated Torque: 8 N·m (50Hz) / 7.91 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G90BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/90, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/90 \| Output Speed: 17 rpm (50Hz) / 20 rpm (60Hz) \| Rated Torque: 8 N·m (50Hz) / 8 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G100BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/100, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/100 \| Output Speed: 15 rpm (50Hz) / 18 rpm (60Hz) \| Rated Torque: 8 N·m (50Hz) / 8 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G120BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/120, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/120 \| Output Speed: 12.5 rpm (50Hz) / 15.0 rpm (60Hz) \| Rated Torque: 8 N·m (50Hz) / 8 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G150BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/150, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/150 \| Output Speed: 10 rpm (50Hz) / 12 rpm (60Hz) \| Rated Torque: 8 N·m (50Hz) / 8 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8
K8G180BRS	GGM K8G□BRS right-angle solid-shaft gearhead, ratio 1/180, ø10 keyed shaft, □80/25W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □80 (for 25W, K8I□25N□) \| Gear Ratio: 1/180 \| Output Speed: 8.3 rpm (50Hz) / 10.0 rpm (60Hz) \| Rated Torque: 8 N·m (50Hz) / 8 N·m (60Hz) \| Max Permissible Torque: 8 N·m (80 kgf·cm) \| Output Shaft: ø10 solid, key type \| Mounting: M5 P0.8

[GGM] — K8H□B Solid-Shaft Gearhead (for K8 50/60W Brushless Motor Unit, ø15 solid, 1/5~1/200)

GGM K8H□B inline solid-shaft gearhead for K8 50/60W brushless motor units, with ø15 keyed output shaft and □80 flange (ø94 P.C.D). Deceleration ratios 1/5 to 1/200 (8 steps), allowed output torque up to 16 N·m, 81–90% efficiency; motor sold separately.

Brand: GGM Category: Gearheads 8 models

Product Code	Description	Brand	Spec
K8H5B	GGM K8H□B inline solid-shaft gearhead, ratio 1/5, ø15 keyed shaft, for K8 50/60W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/5 \| Output Speed Range: 20~600 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 0.9 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 90% \| Allowed Overhang Load: 200 N (at 10mm from shaft end) \| Allowed Thrust Load: 100 N \| Output Shaft: ø15 solid, key type \| Flange: □80, P.C.D ø94 \| Fixing Bolt: M6 P1.0×65 (set included)
K8H10B	GGM K8H□B inline solid-shaft gearhead, ratio 1/10, ø15 keyed shaft, for K8 50/60W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/10 \| Output Speed Range: 10~300 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 1.8 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 90% \| Allowed Overhang Load: 300 N (at 10mm from shaft end) \| Allowed Thrust Load: 100 N \| Output Shaft: ø15 solid, key type \| Flange: □80, P.C.D ø94 \| Fixing Bolt: M6 P1.0×65 (set included)
K8H15B	GGM K8H□B inline solid-shaft gearhead, ratio 1/15, ø15 keyed shaft, for K8 50/60W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/15 \| Output Speed Range: 6.7~200 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 2.7 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 90% \| Allowed Overhang Load: 300 N (at 10mm from shaft end) \| Allowed Thrust Load: 100 N \| Output Shaft: ø15 solid, key type \| Flange: □80, P.C.D ø94 \| Fixing Bolt: M6 P1.0×65 (set included)
K8H20B	GGM K8H□B inline solid-shaft gearhead, ratio 1/20, ø15 keyed shaft, for K8 50/60W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/20 \| Output Speed Range: 5~150 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 3.6 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 90% \| Allowed Overhang Load: 300 N (at 10mm from shaft end) \| Allowed Thrust Load: 100 N \| Output Shaft: ø15 solid, key type \| Flange: □80, P.C.D ø94 \| Fixing Bolt: M6 P1.0×65 (set included)
K8H30B	GGM K8H□B inline solid-shaft gearhead, ratio 1/30, ø15 keyed shaft, for K8 50/60W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/30 \| Output Speed Range: 3.3~100 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 5.2 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 86% \| Allowed Overhang Load: 450 N (at 10mm from shaft end) \| Allowed Thrust Load: 100 N \| Output Shaft: ø15 solid, key type \| Flange: □80, P.C.D ø94 \| Fixing Bolt: M6 P1.0×70 (set included)
K8H50B	GGM K8H□B inline solid-shaft gearhead, ratio 1/50, ø15 keyed shaft, for K8 50/60W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/50 \| Output Speed Range: 2~60 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 8.6 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 86% \| Allowed Overhang Load: 450 N (at 10mm from shaft end) \| Allowed Thrust Load: 100 N \| Output Shaft: ø15 solid, key type \| Flange: □80, P.C.D ø94 \| Fixing Bolt: M6 P1.0×70 (set included)
K8H100B	GGM K8H□B inline solid-shaft gearhead, ratio 1/100, ø15 keyed shaft, for K8 50/60W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/100 \| Output Speed Range: 1~30 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 16 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 86% \| Allowed Overhang Load: 450 N (at 10mm from shaft end) \| Allowed Thrust Load: 100 N \| Output Shaft: ø15 solid, key type \| Flange: □80, P.C.D ø94 \| Fixing Bolt: M6 P1.0×70 (set included)
K8H200B	GGM K8H□B inline solid-shaft gearhead, ratio 1/200, ø15 keyed shaft, for K8 50/60W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/200 \| Output Speed Range: 0.5~15 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 16 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 81% \| Allowed Overhang Load: 450 N (at 10mm from shaft end) \| Allowed Thrust Load: 100 N \| Output Shaft: ø15 solid, key type \| Flange: □80, P.C.D ø94 \| Fixing Bolt: M6 P1.0×75 (set included)

[GGM] — K8H□BTH Flat Hollow-Shaft Gearhead (for K8 50/60W Brushless Motor Unit, ø15 hollow, 1/5~1/200)

GGM K8H□BTH flat hollow-shaft gearhead for K8 50/60W brushless motor units, with ø15 hollow output bore (H8), ø72 pilot flange and M6×70 fixing bolt set (included). Deceleration ratios 1/5 to 1/200 (8 steps), allowed output torque up to 34 N·m, 85% efficiency; motor sold separately.

Brand: GGM Category: Gearheads 8 models

Product Code	Description	Brand	Spec
K8H5BTH	GGM K8H□BTH flat hollow-shaft gearhead, ratio 1/5, ø15 hollow bore, for K8 50/60W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/5 \| Output Speed Range: 20~600 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 0.85 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 800 N (at 10mm from shaft end) \| Allowed Thrust Load: 400 N \| Output Shaft: ø15 hollow bore (H8), key type \| Flange: ø72 (h7), P.C.D ø94 \| Fixing Bolt: M6 P1.0×70 (set included)
K8H10BTH	GGM K8H□BTH flat hollow-shaft gearhead, ratio 1/10, ø15 hollow bore, for K8 50/60W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/10 \| Output Speed Range: 10~300 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 1.7 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 800 N (at 10mm from shaft end) \| Allowed Thrust Load: 400 N \| Output Shaft: ø15 hollow bore (H8), key type \| Flange: ø72 (h7), P.C.D ø94 \| Fixing Bolt: M6 P1.0×70 (set included)
K8H15BTH	GGM K8H□BTH flat hollow-shaft gearhead, ratio 1/15, ø15 hollow bore, for K8 50/60W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/15 \| Output Speed Range: 6.7~200 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 2.6 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1200 N (at 10mm from shaft end) \| Allowed Thrust Load: 400 N \| Output Shaft: ø15 hollow bore (H8), key type \| Flange: ø72 (h7), P.C.D ø94 \| Fixing Bolt: M6 P1.0×70 (set included)
K8H20BTH	GGM K8H□BTH flat hollow-shaft gearhead, ratio 1/20, ø15 hollow bore, for K8 50/60W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/20 \| Output Speed Range: 5~150 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 3.4 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1200 N (at 10mm from shaft end) \| Allowed Thrust Load: 400 N \| Output Shaft: ø15 hollow bore (H8), key type \| Flange: ø72 (h7), P.C.D ø94 \| Fixing Bolt: M6 P1.0×70 (set included)
K8H30BTH	GGM K8H□BTH flat hollow-shaft gearhead, ratio 1/30, ø15 hollow bore, for K8 50/60W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/30 \| Output Speed Range: 3.3~100 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 5.1 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1200 N (at 10mm from shaft end) \| Allowed Thrust Load: 400 N \| Output Shaft: ø15 hollow bore (H8), key type \| Flange: ø72 (h7), P.C.D ø94 \| Fixing Bolt: M6 P1.0×70 (set included)
K8H50BTH	GGM K8H□BTH flat hollow-shaft gearhead, ratio 1/50, ø15 hollow bore, for K8 50/60W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/50 \| Output Speed Range: 2~60 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 8.5 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1200 N (at 10mm from shaft end) \| Allowed Thrust Load: 400 N \| Output Shaft: ø15 hollow bore (H8), key type \| Flange: ø72 (h7), P.C.D ø94 \| Fixing Bolt: M6 P1.0×70 (set included)
K8H100BTH	GGM K8H□BTH flat hollow-shaft gearhead, ratio 1/100, ø15 hollow bore, for K8 50/60W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/100 \| Output Speed Range: 1~30 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 17 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1200 N (at 10mm from shaft end) \| Allowed Thrust Load: 400 N \| Output Shaft: ø15 hollow bore (H8), key type \| Flange: ø72 (h7), P.C.D ø94 \| Fixing Bolt: M6 P1.0×70 (set included)
K8H200BTH	GGM K8H□BTH flat hollow-shaft gearhead, ratio 1/200, ø15 hollow bore, for K8 50/60W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K8 Brushless Motor Unit) \| Deceleration Ratio: 1/200 \| Output Speed Range: 0.5~15 r/min (with K8BH 100-3000 r/min motor) \| Allowed Output Torque: 34 N·m (K8 50/60W brushless, AC type) \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1200 N (at 10mm from shaft end) \| Allowed Thrust Load: 400 N \| Output Shaft: ø15 hollow bore (H8), key type \| Flange: ø72 (h7), P.C.D ø94 \| Fixing Bolt: M6 P1.0×70 (set included)

[GGM] — K9G Gearhead for □90 40W Geared Motors (□90mm, 1/3–1/200 + Decimal, Cap 10 N·m, ø12 Keyed Shaft)

GGM K9G parallel-shaft gearhead for □90mm 40W GGM geared motors (induction, reversible, brake, speed-control), sold separately from the motor. 24 gear ratios 1/3–1/200 plus decimal gearhead K9G10BX (1/10), ø12 (h7) keyed output shaft, max permissible torque 10 N·m / 100 kgf·cm.

Brand: GGM Category: Gearheads 25 models

Product Code	Description	Brand	Spec
K9G3B	GGM K9G gearhead K9G3B — ratio 1/3, output 500/600 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/3 \| Output Speed: 500 rpm @50Hz / 600 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G3.6B	GGM K9G gearhead K9G3.6B — ratio 1/3.6, output 416/500 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/3.6 \| Output Speed: 416 rpm @50Hz / 500 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G5B	GGM K9G gearhead K9G5B — ratio 1/5, output 300/360 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/5 \| Output Speed: 300 rpm @50Hz / 360 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G6B	GGM K9G gearhead K9G6B — ratio 1/6, output 250/300 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/6 \| Output Speed: 250 rpm @50Hz / 300 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G7.5B	GGM K9G gearhead K9G7.5B — ratio 1/7.5, output 200/240 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/7.5 \| Output Speed: 200 rpm @50Hz / 240 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G9B	GGM K9G gearhead K9G9B — ratio 1/9, output 166/200 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/9 \| Output Speed: 166 rpm @50Hz / 200 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G10B	GGM K9G gearhead K9G10B — ratio 1/10, output 150/180 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/10 \| Output Speed: 150 rpm @50Hz / 180 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G12.5B	GGM K9G gearhead K9G12.5B — ratio 1/12.5, output 120/144 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/12.5 \| Output Speed: 120 rpm @50Hz / 144 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G15B	GGM K9G gearhead K9G15B — ratio 1/15, output 100/120 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/15 \| Output Speed: 100 rpm @50Hz / 120 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G18B	GGM K9G gearhead K9G18B — ratio 1/18, output 83/100 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/18 \| Output Speed: 83 rpm @50Hz / 100 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G20B	GGM K9G gearhead K9G20B — ratio 1/20, output 75/90 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/20 \| Output Speed: 75 rpm @50Hz / 90 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G25B	GGM K9G gearhead K9G25B — ratio 1/25, output 60/72 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/25 \| Output Speed: 60 rpm @50Hz / 72 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G30B	GGM K9G gearhead K9G30B — ratio 1/30, output 50/60 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/30 \| Output Speed: 50 rpm @50Hz / 60 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G36B	GGM K9G gearhead K9G36B — ratio 1/36, output 41/50 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/36 \| Output Speed: 41 rpm @50Hz / 50 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G40B	GGM K9G gearhead K9G40B — ratio 1/40, output 37/45 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/40 \| Output Speed: 37 rpm @50Hz / 45 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G50B	GGM K9G gearhead K9G50B — ratio 1/50, output 30/36 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/50 \| Output Speed: 30 rpm @50Hz / 36 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G60B	GGM K9G gearhead K9G60B — ratio 1/60, output 25/30 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/60 \| Output Speed: 25 rpm @50Hz / 30 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G75B	GGM K9G gearhead K9G75B — ratio 1/75, output 20/24 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/75 \| Output Speed: 20 rpm @50Hz / 24 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G90B	GGM K9G gearhead K9G90B — ratio 1/90, output 16/20 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/90 \| Output Speed: 16 rpm @50Hz / 20 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G100B	GGM K9G gearhead K9G100B — ratio 1/100, output 15/18 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/100 \| Output Speed: 15 rpm @50Hz / 18 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G120B	GGM K9G gearhead K9G120B — ratio 1/120, output 12.5/15 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/120 \| Output Speed: 12.5 rpm @50Hz / 15 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G150B	GGM K9G gearhead K9G150B — ratio 1/150, output 10/12 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/150 \| Output Speed: 10 rpm @50Hz / 12 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G180B	GGM K9G gearhead K9G180B — ratio 1/180, output 8.3/10 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/180 \| Output Speed: 8.3 rpm @50Hz / 10 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G200B	GGM K9G gearhead K9G200B — ratio 1/200, output 7.5/9 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/200 \| Output Speed: 7.5 rpm @50Hz / 9 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 10 N·m / 100 kgf·cm
K9G10BX	GGM K9G decimal gearhead K9G10BX — 1/10 sub-ratio, □90mm	GGM	Type: Decimal Gearhead \| Gear Ratio: 1/10 (sub-ratio) \| Max Permissible Torque: 10 N·m / 100 kgf·cm \| Note: Installed between motor and gearhead for ratios finer than 1/3

[GGM] — K9H□B Solid-Shaft Gearhead (for K9 90/150W Brushless Motor Unit, ø18 solid, 1/5~1/200)

GGM K9H□B inline solid-shaft gearhead for K9 90/150W brushless motor units, with ø18 keyed output shaft and □90 flange (ø104 P.C.D). Deceleration ratios 1/5 to 1/200 (8 steps), allowed output torque up to 30 N·m, 81–90% efficiency; motor sold separately.

Brand: GGM Category: Gearheads 8 models

Product Code	Description	Brand	Spec
K9H5B	GGM K9H□B inline solid-shaft gearhead, ratio 1/5, ø18 keyed shaft, for K9 90/150W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/5 \| Output Speed Range: 20~600 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 1.35 N·m (90W) / 2.2 N·m (150W) brushless, AC type \| Gearhead Efficiency: 90% \| Allowed Overhang Load: 300 N (at 10mm from shaft end) \| Allowed Thrust Load: 150 N \| Output Shaft: ø18 solid, key type \| Flange: □90, P.C.D ø104 \| Fixing Bolt: M8 P1.25×75 (set included)
K9H10B	GGM K9H□B inline solid-shaft gearhead, ratio 1/10, ø18 keyed shaft, for K9 90/150W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/10 \| Output Speed Range: 10~300 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 2.7 N·m (90W) / 4.4 N·m (150W) brushless, AC type \| Gearhead Efficiency: 90% \| Allowed Overhang Load: 400 N (at 10mm from shaft end) \| Allowed Thrust Load: 150 N \| Output Shaft: ø18 solid, key type \| Flange: □90, P.C.D ø104 \| Fixing Bolt: M8 P1.25×75 (set included)
K9H15B	GGM K9H□B inline solid-shaft gearhead, ratio 1/15, ø18 keyed shaft, for K9 90/150W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/15 \| Output Speed Range: 6.7~200 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 4.1 N·m (90W) / 6.6 N·m (150W) brushless, AC type \| Gearhead Efficiency: 90% \| Allowed Overhang Load: 400 N (at 10mm from shaft end) \| Allowed Thrust Load: 150 N \| Output Shaft: ø18 solid, key type \| Flange: □90, P.C.D ø104 \| Fixing Bolt: M8 P1.25×75 (set included)
K9H20B	GGM K9H□B inline solid-shaft gearhead, ratio 1/20, ø18 keyed shaft, for K9 90/150W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/20 \| Output Speed Range: 5~150 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 5.4 N·m (90W) / 8.8 N·m (150W) brushless, AC type \| Gearhead Efficiency: 90% \| Allowed Overhang Load: 400 N (at 10mm from shaft end) \| Allowed Thrust Load: 150 N \| Output Shaft: ø18 solid, key type \| Flange: □90, P.C.D ø104 \| Fixing Bolt: M8 P1.25×75 (set included)
K9H30B	GGM K9H□B inline solid-shaft gearhead, ratio 1/30, ø18 keyed shaft, for K9 90/150W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/30 \| Output Speed Range: 3.3~100 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 7.7 N·m (90W) / 12.6 N·m (150W) brushless, AC type \| Gearhead Efficiency: 86% \| Allowed Overhang Load: 500 N (at 10mm from shaft end) \| Allowed Thrust Load: 150 N \| Output Shaft: ø18 solid, key type \| Flange: □90, P.C.D ø104 \| Fixing Bolt: M8 P1.25×90 (set included)
K9H50B	GGM K9H□B inline solid-shaft gearhead, ratio 1/50, ø18 keyed shaft, for K9 90/150W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/50 \| Output Speed Range: 2~60 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 12.9 N·m (90W) / 21.1 N·m (150W) brushless, AC type \| Gearhead Efficiency: 86% \| Allowed Overhang Load: 500 N (at 10mm from shaft end) \| Allowed Thrust Load: 150 N \| Output Shaft: ø18 solid, key type \| Flange: □90, P.C.D ø104 \| Fixing Bolt: M8 P1.25×90 (set included)
K9H100B	GGM K9H□B inline solid-shaft gearhead, ratio 1/100, ø18 keyed shaft, for K9 90/150W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/100 \| Output Speed Range: 1~30 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 25.8 N·m (90W) / 30 N·m (150W) brushless, AC type \| Gearhead Efficiency: 86% \| Allowed Overhang Load: 500 N (at 10mm from shaft end) \| Allowed Thrust Load: 150 N \| Output Shaft: ø18 solid, key type \| Flange: □90, P.C.D ø104 \| Fixing Bolt: M8 P1.25×90 (set included)
K9H200B	GGM K9H□B inline solid-shaft gearhead, ratio 1/200, ø18 keyed shaft, for K9 90/150W brushless motor unit	GGM	Type: Inline Solid-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/200 \| Output Speed Range: 0.5~15 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 30 N·m (90W/150W) brushless, AC type \| Gearhead Efficiency: 81% \| Allowed Overhang Load: 500 N (at 10mm from shaft end) \| Allowed Thrust Load: 150 N \| Output Shaft: ø18 solid, key type \| Flange: □90, P.C.D ø104 \| Fixing Bolt: M8 P1.25×95 (set included)

[GGM] — K9H□BTH Flat Hollow-Shaft Gearhead (for K9 90/150W Brushless Motor Unit, ø20 hollow, 1/5~1/200)

GGM K9H□BTH flat hollow-shaft gearhead for K9 90/150W brushless motor units, with ø20 hollow output bore (H8), ø83 pilot flange and M8×90 fixing bolt set (included). Deceleration ratios 1/5 to 1/200 (8 steps), allowed output torque up to 68 N·m, 85% efficiency; motor sold separately.

Brand: GGM Category: Gearheads 8 models

Product Code	Description	Brand	Spec
K9H5BTH	GGM K9H□BTH flat hollow-shaft gearhead, ratio 1/5, ø20 hollow bore, for K9 90/150W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/5 \| Output Speed Range: 20~600 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 1.9 N·m (90W) / 2.1 N·m (150W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 900 N (at 10mm from shaft end) \| Allowed Thrust Load: 500 N \| Output Shaft: ø20 hollow bore (H8), key type \| Flange: ø83 (h7), pilot ø50 (h8), P.C.D ø104 \| Fixing Bolt: M8 P1.25×90 (set included)
K9H10BTH	GGM K9H□BTH flat hollow-shaft gearhead, ratio 1/10, ø20 hollow bore, for K9 90/150W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/10 \| Output Speed Range: 10~300 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 3.8 N·m (90W) / 4.2 N·m (150W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 900 N (at 10mm from shaft end) \| Allowed Thrust Load: 500 N \| Output Shaft: ø20 hollow bore (H8), key type \| Flange: ø83 (h7), pilot ø50 (h8), P.C.D ø104 \| Fixing Bolt: M8 P1.25×90 (set included)
K9H15BTH	GGM K9H□BTH flat hollow-shaft gearhead, ratio 1/15, ø20 hollow bore, for K9 90/150W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/15 \| Output Speed Range: 6.7~200 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 5.7 N·m (90W) / 6.2 N·m (150W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1300 N (at 10mm from shaft end) \| Allowed Thrust Load: 500 N \| Output Shaft: ø20 hollow bore (H8), key type \| Flange: ø83 (h7), pilot ø50 (h8), P.C.D ø104 \| Fixing Bolt: M8 P1.25×90 (set included)
K9H20BTH	GGM K9H□BTH flat hollow-shaft gearhead, ratio 1/20, ø20 hollow bore, for K9 90/150W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/20 \| Output Speed Range: 5~150 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 7.7 N·m (90W) / 8.3 N·m (150W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1300 N (at 10mm from shaft end) \| Allowed Thrust Load: 500 N \| Output Shaft: ø20 hollow bore (H8), key type \| Flange: ø83 (h7), pilot ø50 (h8), P.C.D ø104 \| Fixing Bolt: M8 P1.25×90 (set included)
K9H30BTH	GGM K9H□BTH flat hollow-shaft gearhead, ratio 1/30, ø20 hollow bore, for K9 90/150W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/30 \| Output Speed Range: 3.3~100 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 11.5 N·m (90W) / 12.5 N·m (150W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1500 N (at 10mm from shaft end) \| Allowed Thrust Load: 500 N \| Output Shaft: ø20 hollow bore (H8), key type \| Flange: ø83 (h7), pilot ø50 (h8), P.C.D ø104 \| Fixing Bolt: M8 P1.25×90 (set included)
K9H50BTH	GGM K9H□BTH flat hollow-shaft gearhead, ratio 1/50, ø20 hollow bore, for K9 90/150W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/50 \| Output Speed Range: 2~60 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 19.1 N·m (90W) / 21 N·m (150W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1500 N (at 10mm from shaft end) \| Allowed Thrust Load: 500 N \| Output Shaft: ø20 hollow bore (H8), key type \| Flange: ø83 (h7), pilot ø50 (h8), P.C.D ø104 \| Fixing Bolt: M8 P1.25×90 (set included)
K9H100BTH	GGM K9H□BTH flat hollow-shaft gearhead, ratio 1/100, ø20 hollow bore, for K9 90/150W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/100 \| Output Speed Range: 1~30 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 38.3 N·m (90W) / 42 N·m (150W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1500 N (at 10mm from shaft end) \| Allowed Thrust Load: 500 N \| Output Shaft: ø20 hollow bore (H8), key type \| Flange: ø83 (h7), pilot ø50 (h8), P.C.D ø104 \| Fixing Bolt: M8 P1.25×90 (set included)
K9H200BTH	GGM K9H□BTH flat hollow-shaft gearhead, ratio 1/200, ø20 hollow bore, for K9 90/150W brushless motor unit	GGM	Type: Flat Hollow-Shaft Gearhead (for K9 Brushless Motor Unit) \| Deceleration Ratio: 1/200 \| Output Speed Range: 0.5~15 r/min (with 100-3000 r/min motor) \| Allowed Output Torque: 68 N·m (90W/150W) brushless, AC type \| Gearhead Efficiency: 85% \| Allowed Overhang Load: 1500 N (at 10mm from shaft end) \| Allowed Thrust Load: 500 N \| Output Shaft: ø20 hollow bore (H8), key type \| Flange: ø83 (h7), pilot ø50 (h8), P.C.D ø104 \| Fixing Bolt: M8 P1.25×90 (set included)

[GGM] — K9P□B Gearhead for □90 60–200W Geared Motors (□90mm, 1/3–1/200 + Decimal, Cap 20 N·m, ø15 Keyed Shaft)

GGM K9P-B parallel-shaft gearhead for □90mm 60–200W GGM geared motors (induction, reversible, brake), sold separately. Standard □90mm mount (ø104 B.C., 4-ø6.5). 24 gear ratios 1/3–1/200 plus decimal gearhead K9P10BX, ø15 (h7) keyed output shaft, max permissible torque 20 N·m / 200 kgf·cm.

Brand: GGM Category: Gearheads 25 models

Product Code	Description	Brand	Spec
K9P3B	GGM K9P gearhead K9P3B — ratio 1/3, output 500/600 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/3 \| Output Speed: 500 rpm @50Hz / 600 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P3.6B	GGM K9P gearhead K9P3.6B — ratio 1/3.6, output 416/500 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/3.6 \| Output Speed: 416 rpm @50Hz / 500 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P5B	GGM K9P gearhead K9P5B — ratio 1/5, output 300/360 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/5 \| Output Speed: 300 rpm @50Hz / 360 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P6B	GGM K9P gearhead K9P6B — ratio 1/6, output 250/300 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/6 \| Output Speed: 250 rpm @50Hz / 300 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P7.5B	GGM K9P gearhead K9P7.5B — ratio 1/7.5, output 200/240 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/7.5 \| Output Speed: 200 rpm @50Hz / 240 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P9B	GGM K9P gearhead K9P9B — ratio 1/9, output 166/200 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/9 \| Output Speed: 166 rpm @50Hz / 200 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P10B	GGM K9P gearhead K9P10B — ratio 1/10, output 150/180 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/10 \| Output Speed: 150 rpm @50Hz / 180 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P12.5B	GGM K9P gearhead K9P12.5B — ratio 1/12.5, output 120/144 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/12.5 \| Output Speed: 120 rpm @50Hz / 144 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P15B	GGM K9P gearhead K9P15B — ratio 1/15, output 100/120 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/15 \| Output Speed: 100 rpm @50Hz / 120 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P18B	GGM K9P gearhead K9P18B — ratio 1/18, output 83/100 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/18 \| Output Speed: 83 rpm @50Hz / 100 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P20B	GGM K9P gearhead K9P20B — ratio 1/20, output 75/90 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/20 \| Output Speed: 75 rpm @50Hz / 90 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P25B	GGM K9P gearhead K9P25B — ratio 1/25, output 60/72 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/25 \| Output Speed: 60 rpm @50Hz / 72 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P30B	GGM K9P gearhead K9P30B — ratio 1/30, output 50/60 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/30 \| Output Speed: 50 rpm @50Hz / 60 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P36B	GGM K9P gearhead K9P36B — ratio 1/36, output 41/50 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/36 \| Output Speed: 41 rpm @50Hz / 50 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P40B	GGM K9P gearhead K9P40B — ratio 1/40, output 37/45 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/40 \| Output Speed: 37 rpm @50Hz / 45 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P50B	GGM K9P gearhead K9P50B — ratio 1/50, output 30/36 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/50 \| Output Speed: 30 rpm @50Hz / 36 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P60B	GGM K9P gearhead K9P60B — ratio 1/60, output 25/30 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/60 \| Output Speed: 25 rpm @50Hz / 30 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P75B	GGM K9P gearhead K9P75B — ratio 1/75, output 20/24 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/75 \| Output Speed: 20 rpm @50Hz / 24 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P90B	GGM K9P gearhead K9P90B — ratio 1/90, output 16/20 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/90 \| Output Speed: 16 rpm @50Hz / 20 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P100B	GGM K9P gearhead K9P100B — ratio 1/100, output 15/18 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/100 \| Output Speed: 15 rpm @50Hz / 18 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P120B	GGM K9P gearhead K9P120B — ratio 1/120, output 12.5/15 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/120 \| Output Speed: 12.5 rpm @50Hz / 15 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P150B	GGM K9P gearhead K9P150B — ratio 1/150, output 10/12 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/150 \| Output Speed: 10 rpm @50Hz / 12 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P180B	GGM K9P gearhead K9P180B — ratio 1/180, output 8.3/10 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/180 \| Output Speed: 8.3 rpm @50Hz / 10 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P200B	GGM K9P gearhead K9P200B — ratio 1/200, output 7.5/9 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft) \| Gear Ratio: 1/200 \| Output Speed: 7.5 rpm @50Hz / 9 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P10BX	GGM K9P decimal gearhead K9P10BX — 1/10 sub-ratio, □90mm	GGM	Type: Decimal Gearhead \| Gear Ratio: 1/10 (sub-ratio) \| Max Permissible Torque: 20 N·m / 200 kgf·cm \| Note: Installed between motor and gearhead for ratios finer than 1/3

[GGM] — K9P□BF Gearhead for □90 60–200W Geared Motors (□90mm, 1/3–1/200, 130mm Output Flange, Cap 20 N·m, ø15 Keyed Shaft)

GGM K9P-BF parallel-shaft gearhead for □90mm 60–200W GGM geared motors, sold separately. Same internals as K9P-B with a 130mm output flange (110±0.5, 4-ø8.5 holes + 4-M6 tap). 24 gear ratios 1/3–1/200, ø15 (h7) keyed output shaft, max permissible torque 20 N·m / 200 kgf·cm. Shares decimal gearhead K9P10BX.

Brand: GGM Category: Gearheads 24 models

Product Code	Description	Brand	Spec
K9P3BF	GGM K9P gearhead K9P3BF (flange) — ratio 1/3, output 500/600 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/3 \| Output Speed: 500 rpm @50Hz / 600 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P3.6BF	GGM K9P gearhead K9P3.6BF (flange) — ratio 1/3.6, output 416/500 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/3.6 \| Output Speed: 416 rpm @50Hz / 500 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P5BF	GGM K9P gearhead K9P5BF (flange) — ratio 1/5, output 300/360 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/5 \| Output Speed: 300 rpm @50Hz / 360 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P6BF	GGM K9P gearhead K9P6BF (flange) — ratio 1/6, output 250/300 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/6 \| Output Speed: 250 rpm @50Hz / 300 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P7.5BF	GGM K9P gearhead K9P7.5BF (flange) — ratio 1/7.5, output 200/240 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/7.5 \| Output Speed: 200 rpm @50Hz / 240 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P9BF	GGM K9P gearhead K9P9BF (flange) — ratio 1/9, output 166/200 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/9 \| Output Speed: 166 rpm @50Hz / 200 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P10BF	GGM K9P gearhead K9P10BF (flange) — ratio 1/10, output 150/180 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/10 \| Output Speed: 150 rpm @50Hz / 180 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P12.5BF	GGM K9P gearhead K9P12.5BF (flange) — ratio 1/12.5, output 120/144 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/12.5 \| Output Speed: 120 rpm @50Hz / 144 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P15BF	GGM K9P gearhead K9P15BF (flange) — ratio 1/15, output 100/120 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/15 \| Output Speed: 100 rpm @50Hz / 120 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P18BF	GGM K9P gearhead K9P18BF (flange) — ratio 1/18, output 83/100 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/18 \| Output Speed: 83 rpm @50Hz / 100 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P20BF	GGM K9P gearhead K9P20BF (flange) — ratio 1/20, output 75/90 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/20 \| Output Speed: 75 rpm @50Hz / 90 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P25BF	GGM K9P gearhead K9P25BF (flange) — ratio 1/25, output 60/72 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/25 \| Output Speed: 60 rpm @50Hz / 72 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P30BF	GGM K9P gearhead K9P30BF (flange) — ratio 1/30, output 50/60 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/30 \| Output Speed: 50 rpm @50Hz / 60 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P36BF	GGM K9P gearhead K9P36BF (flange) — ratio 1/36, output 41/50 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/36 \| Output Speed: 41 rpm @50Hz / 50 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P40BF	GGM K9P gearhead K9P40BF (flange) — ratio 1/40, output 37/45 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/40 \| Output Speed: 37 rpm @50Hz / 45 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P50BF	GGM K9P gearhead K9P50BF (flange) — ratio 1/50, output 30/36 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/50 \| Output Speed: 30 rpm @50Hz / 36 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P60BF	GGM K9P gearhead K9P60BF (flange) — ratio 1/60, output 25/30 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/60 \| Output Speed: 25 rpm @50Hz / 30 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P75BF	GGM K9P gearhead K9P75BF (flange) — ratio 1/75, output 20/24 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/75 \| Output Speed: 20 rpm @50Hz / 24 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P90BF	GGM K9P gearhead K9P90BF (flange) — ratio 1/90, output 16/20 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/90 \| Output Speed: 16 rpm @50Hz / 20 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P100BF	GGM K9P gearhead K9P100BF (flange) — ratio 1/100, output 15/18 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/100 \| Output Speed: 15 rpm @50Hz / 18 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P120BF	GGM K9P gearhead K9P120BF (flange) — ratio 1/120, output 12.5/15 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/120 \| Output Speed: 12.5 rpm @50Hz / 15 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P150BF	GGM K9P gearhead K9P150BF (flange) — ratio 1/150, output 10/12 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/150 \| Output Speed: 10 rpm @50Hz / 12 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P180BF	GGM K9P gearhead K9P180BF (flange) — ratio 1/180, output 8.3/10 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/180 \| Output Speed: 8.3 rpm @50Hz / 10 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm
K9P200BF	GGM K9P gearhead K9P200BF (flange) — ratio 1/200, output 7.5/9 rpm (50/60Hz), □90mm	GGM	Type: Gearhead (Parallel Shaft, 130mm Output Flange) \| Gear Ratio: 1/200 \| Output Speed: 7.5 rpm @50Hz / 9 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm

[GGM] — K9P□BRH Right-Angle Hollow-Shaft Gearhead (□90, for 60/90/120W motor, 20 N·m, 1/3~1/180)

GGM K9P□BRH right-angle hollow-shaft gearhead for □90 frame 60/90/120W induction motors, with ø17 hollow output bore (H8) and M6 mounting bolts. Gear ratios 1/3 to 1/180 (20 steps), output speed 8.3–500 rpm, max permissible torque 20 N·m; motor sold separately.

Brand: GGM Category: Gearheads 20 models

Product Code	Description	Brand	Spec
K9P3BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/3, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/3 \| Output Speed: 500 rpm (50Hz) / 600 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P3.6BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/3.6, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/3.6 \| Output Speed: 416 rpm (50Hz) / 500 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P5BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/5, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/5 \| Output Speed: 300 rpm (50Hz) / 360 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P6BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/6, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/6 \| Output Speed: 250 rpm (50Hz) / 300 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P7.5BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/7.5, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/7.5 \| Output Speed: 200 rpm (50Hz) / 240 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P9BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/9, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/9 \| Output Speed: 166 rpm (50Hz) / 200 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P12.5BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/12.5, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/12.5 \| Output Speed: 120 rpm (50Hz) / 144 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P15BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/15, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/15 \| Output Speed: 100 rpm (50Hz) / 120 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P18BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/18, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/18 \| Output Speed: 83 rpm (50Hz) / 100 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P25BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/25, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/25 \| Output Speed: 60 rpm (50Hz) / 72 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P30BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/30, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/30 \| Output Speed: 50 rpm (50Hz) / 60 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P36BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/36, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/36 \| Output Speed: 42 rpm (50Hz) / 50 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P50BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/50, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/50 \| Output Speed: 30 rpm (50Hz) / 36 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P60BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/60, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/60 \| Output Speed: 25 rpm (50Hz) / 30 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P75BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/75, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/75 \| Output Speed: 20 rpm (50Hz) / 24 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P90BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/90, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/90 \| Output Speed: 17 rpm (50Hz) / 20 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P100BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/100, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/100 \| Output Speed: 15 rpm (50Hz) / 18 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P120BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/120, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/120 \| Output Speed: 12.5 rpm (50Hz) / 15 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P150BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/150, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/150 \| Output Speed: 10 rpm (50Hz) / 12 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0
K9P180BRH	GGM K9P□BRH right-angle hollow-shaft gearhead, ratio 1/180, ø17 hollow bore, □90/60-120W	GGM	Type: Right-Angle Hollow-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/180 \| Output Speed: 8.3 rpm (50Hz) / 10 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø17 hollow bore (H8), key type \| Mounting: M6 P1.0

[GGM] — K9P□BRS Right-Angle Solid-Shaft Gearhead (□90, for 60/90/120W motor, 20 N·m, 1/3~1/180)

GGM K9P□BRS right-angle solid-shaft gearhead for □90 frame 60/90/120W induction motors, with ø15 keyed output shaft (h7) and M6 mounting bolts. Gear ratios 1/3 to 1/180 (20 steps), output speed 8.3–500 rpm, max permissible torque 20 N·m; motor sold separately.

Brand: GGM Category: Gearheads 20 models

Product Code	Description	Brand	Spec
K9P3BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/3, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/3 \| Output Speed: 500 rpm (50Hz) / 600 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P3.6BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/3.6, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/3.6 \| Output Speed: 416 rpm (50Hz) / 500 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P5BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/5, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/5 \| Output Speed: 300 rpm (50Hz) / 360 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P6BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/6, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/6 \| Output Speed: 250 rpm (50Hz) / 300 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P7.5BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/7.5, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/7.5 \| Output Speed: 200 rpm (50Hz) / 240 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P9BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/9, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/9 \| Output Speed: 166 rpm (50Hz) / 200 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P12.5BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/12.5, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/12.5 \| Output Speed: 120 rpm (50Hz) / 144 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P15BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/15, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/15 \| Output Speed: 100 rpm (50Hz) / 120 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P18BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/18, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/18 \| Output Speed: 83 rpm (50Hz) / 100 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P25BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/25, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/25 \| Output Speed: 60 rpm (50Hz) / 72 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P30BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/30, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/30 \| Output Speed: 50 rpm (50Hz) / 60 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P36BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/36, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/36 \| Output Speed: 42 rpm (50Hz) / 50 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P50BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/50, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/50 \| Output Speed: 30 rpm (50Hz) / 36 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P60BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/60, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/60 \| Output Speed: 25 rpm (50Hz) / 30 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P75BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/75, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/75 \| Output Speed: 20 rpm (50Hz) / 24 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P90BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/90, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/90 \| Output Speed: 17 rpm (50Hz) / 20 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P100BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/100, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/100 \| Output Speed: 15 rpm (50Hz) / 18 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P120BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/120, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/120 \| Output Speed: 12.5 rpm (50Hz) / 15 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P150BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/150, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/150 \| Output Speed: 10 rpm (50Hz) / 12 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0
K9P180BRS	GGM K9P□BRS right-angle solid-shaft gearhead, ratio 1/180, ø15 keyed shaft, □90/60-120W	GGM	Type: Right-Angle Solid-Shaft Gearhead \| Frame: □90 (for K9I□60F/90F/120F, 60/90/120W) \| Gear Ratio: 1/180 \| Output Speed: 8.3 rpm (50Hz) / 10 rpm (60Hz) \| Max Permissible Torque: 20 N·m (200 kgf·cm) \| Output Shaft: ø15 solid, key type \| Mounting: M6 P1.0

[GGM] — K9P□BU Gearhead for □90 60–200W Geared Motors (□90mm, 1/3–1/200, ø18 Heavy-Duty Shaft, Cap 20 N·m)

GGM K9P-BU parallel-shaft gearhead for □90mm 60–200W GGM geared motors, sold separately. Heavy-duty ø18 (h7) keyed output shaft (extended output stage), standard □90mm mount (ø104 B.C.). 24 gear ratios 1/3–1/200, max permissible torque 20 N·m / 200 kgf·cm (per K9P B/BF rating). Shares decimal gearhead K9P10BX.

Brand: GGM Category: Gearheads 24 models

Product Code	Description	Brand	Spec
K9P3BU	GGM K9P gearhead K9P3BU — ratio 1/3, output 500/600 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/3 \| Output Speed: 500 rpm @50Hz / 600 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P3.6BU	GGM K9P gearhead K9P3.6BU — ratio 1/3.6, output 416/500 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/3.6 \| Output Speed: 416 rpm @50Hz / 500 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P5BU	GGM K9P gearhead K9P5BU — ratio 1/5, output 300/360 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/5 \| Output Speed: 300 rpm @50Hz / 360 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P6BU	GGM K9P gearhead K9P6BU — ratio 1/6, output 250/300 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/6 \| Output Speed: 250 rpm @50Hz / 300 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P7.5BU	GGM K9P gearhead K9P7.5BU — ratio 1/7.5, output 200/240 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/7.5 \| Output Speed: 200 rpm @50Hz / 240 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P9BU	GGM K9P gearhead K9P9BU — ratio 1/9, output 166/200 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/9 \| Output Speed: 166 rpm @50Hz / 200 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P10BU	GGM K9P gearhead K9P10BU — ratio 1/10, output 150/180 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/10 \| Output Speed: 150 rpm @50Hz / 180 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P12.5BU	GGM K9P gearhead K9P12.5BU — ratio 1/12.5, output 120/144 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/12.5 \| Output Speed: 120 rpm @50Hz / 144 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P15BU	GGM K9P gearhead K9P15BU — ratio 1/15, output 100/120 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/15 \| Output Speed: 100 rpm @50Hz / 120 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P18BU	GGM K9P gearhead K9P18BU — ratio 1/18, output 83/100 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/18 \| Output Speed: 83 rpm @50Hz / 100 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P20BU	GGM K9P gearhead K9P20BU — ratio 1/20, output 75/90 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/20 \| Output Speed: 75 rpm @50Hz / 90 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P25BU	GGM K9P gearhead K9P25BU — ratio 1/25, output 60/72 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/25 \| Output Speed: 60 rpm @50Hz / 72 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P30BU	GGM K9P gearhead K9P30BU — ratio 1/30, output 50/60 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/30 \| Output Speed: 50 rpm @50Hz / 60 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P36BU	GGM K9P gearhead K9P36BU — ratio 1/36, output 41/50 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/36 \| Output Speed: 41 rpm @50Hz / 50 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P40BU	GGM K9P gearhead K9P40BU — ratio 1/40, output 37/45 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/40 \| Output Speed: 37 rpm @50Hz / 45 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P50BU	GGM K9P gearhead K9P50BU — ratio 1/50, output 30/36 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/50 \| Output Speed: 30 rpm @50Hz / 36 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P60BU	GGM K9P gearhead K9P60BU — ratio 1/60, output 25/30 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/60 \| Output Speed: 25 rpm @50Hz / 30 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P75BU	GGM K9P gearhead K9P75BU — ratio 1/75, output 20/24 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/75 \| Output Speed: 20 rpm @50Hz / 24 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P90BU	GGM K9P gearhead K9P90BU — ratio 1/90, output 16/20 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/90 \| Output Speed: 16 rpm @50Hz / 20 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P100BU	GGM K9P gearhead K9P100BU — ratio 1/100, output 15/18 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/100 \| Output Speed: 15 rpm @50Hz / 18 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P120BU	GGM K9P gearhead K9P120BU — ratio 1/120, output 12.5/15 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/120 \| Output Speed: 12.5 rpm @50Hz / 15 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P150BU	GGM K9P gearhead K9P150BU — ratio 1/150, output 10/12 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/150 \| Output Speed: 10 rpm @50Hz / 12 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P180BU	GGM K9P gearhead K9P180BU — ratio 1/180, output 8.3/10 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/180 \| Output Speed: 8.3 rpm @50Hz / 10 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P200BU	GGM K9P gearhead K9P200BU — ratio 1/200, output 7.5/9 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output) \| Gear Ratio: 1/200 \| Output Speed: 7.5 rpm @50Hz / 9 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)

[GGM] — K9P□BUF Gearhead for □90 60–200W Geared Motors (□90mm, 1/3–1/200, ø18 Heavy-Duty Shaft, 130mm Flange, Cap 20 N·m)

GGM K9P-BUF parallel-shaft gearhead for □90mm 60–200W GGM geared motors, sold separately. Heavy-duty ø18 (h7) keyed output shaft (extended output stage) with 130mm output flange (110±0.5, 4-ø8.5 holes + 4-M6 tap). 24 gear ratios 1/3–1/200, max permissible torque 20 N·m / 200 kgf·cm (per K9P B/BF rating). Shares decimal gearhead K9P10BX.

Brand: GGM Category: Gearheads 24 models

Product Code	Description	Brand	Spec
K9P3BUF	GGM K9P gearhead K9P3BUF — ratio 1/3, output 500/600 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/3 \| Output Speed: 500 rpm @50Hz / 600 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P3.6BUF	GGM K9P gearhead K9P3.6BUF — ratio 1/3.6, output 416/500 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/3.6 \| Output Speed: 416 rpm @50Hz / 500 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P5BUF	GGM K9P gearhead K9P5BUF — ratio 1/5, output 300/360 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/5 \| Output Speed: 300 rpm @50Hz / 360 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P6BUF	GGM K9P gearhead K9P6BUF — ratio 1/6, output 250/300 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/6 \| Output Speed: 250 rpm @50Hz / 300 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P7.5BUF	GGM K9P gearhead K9P7.5BUF — ratio 1/7.5, output 200/240 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/7.5 \| Output Speed: 200 rpm @50Hz / 240 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P9BUF	GGM K9P gearhead K9P9BUF — ratio 1/9, output 166/200 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/9 \| Output Speed: 166 rpm @50Hz / 200 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P10BUF	GGM K9P gearhead K9P10BUF — ratio 1/10, output 150/180 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/10 \| Output Speed: 150 rpm @50Hz / 180 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P12.5BUF	GGM K9P gearhead K9P12.5BUF — ratio 1/12.5, output 120/144 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/12.5 \| Output Speed: 120 rpm @50Hz / 144 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P15BUF	GGM K9P gearhead K9P15BUF — ratio 1/15, output 100/120 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/15 \| Output Speed: 100 rpm @50Hz / 120 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P18BUF	GGM K9P gearhead K9P18BUF — ratio 1/18, output 83/100 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/18 \| Output Speed: 83 rpm @50Hz / 100 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P20BUF	GGM K9P gearhead K9P20BUF — ratio 1/20, output 75/90 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/20 \| Output Speed: 75 rpm @50Hz / 90 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P25BUF	GGM K9P gearhead K9P25BUF — ratio 1/25, output 60/72 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/25 \| Output Speed: 60 rpm @50Hz / 72 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P30BUF	GGM K9P gearhead K9P30BUF — ratio 1/30, output 50/60 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/30 \| Output Speed: 50 rpm @50Hz / 60 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P36BUF	GGM K9P gearhead K9P36BUF — ratio 1/36, output 41/50 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/36 \| Output Speed: 41 rpm @50Hz / 50 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P40BUF	GGM K9P gearhead K9P40BUF — ratio 1/40, output 37/45 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/40 \| Output Speed: 37 rpm @50Hz / 45 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P50BUF	GGM K9P gearhead K9P50BUF — ratio 1/50, output 30/36 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/50 \| Output Speed: 30 rpm @50Hz / 36 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P60BUF	GGM K9P gearhead K9P60BUF — ratio 1/60, output 25/30 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/60 \| Output Speed: 25 rpm @50Hz / 30 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P75BUF	GGM K9P gearhead K9P75BUF — ratio 1/75, output 20/24 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/75 \| Output Speed: 20 rpm @50Hz / 24 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P90BUF	GGM K9P gearhead K9P90BUF — ratio 1/90, output 16/20 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/90 \| Output Speed: 16 rpm @50Hz / 20 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P100BUF	GGM K9P gearhead K9P100BUF — ratio 1/100, output 15/18 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/100 \| Output Speed: 15 rpm @50Hz / 18 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P120BUF	GGM K9P gearhead K9P120BUF — ratio 1/120, output 12.5/15 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/120 \| Output Speed: 12.5 rpm @50Hz / 15 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P150BUF	GGM K9P gearhead K9P150BUF — ratio 1/150, output 10/12 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/150 \| Output Speed: 10 rpm @50Hz / 12 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P180BUF	GGM K9P gearhead K9P180BUF — ratio 1/180, output 8.3/10 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/180 \| Output Speed: 8.3 rpm @50Hz / 10 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)
K9P200BUF	GGM K9P gearhead K9P200BUF — ratio 1/200, output 7.5/9 rpm (50/60Hz), □90mm, ø18	GGM	Type: Gearhead (Parallel Shaft, ø18 Heavy-Duty Output, 130mm Flange) \| Gear Ratio: 1/200 \| Output Speed: 7.5 rpm @50Hz / 9 rpm @60Hz (4-pole AC input) \| Max Permissible Torque: 20 N·m / 200 kgf·cm (per K9P B/BF table)