🔍 Can't find your part? We source far beyond this catalog — list any MRO part, even if it's not listed here, and we'll quote it direct from Korean makers.

Fiber Optic

48 products fiber-optic ✕

[Autonics] BF Series Fiber Optic Sensors (NPN)

Fiber optic sensor amplifiers paired with fiber cables for detection in tight spaces, high-temperature areas, or applications requiring small spot detection.

Brand: Autonics Category: Fiber Optic 4 models

Fiber optic sensor amplifiers paired with fiber cables for detection in tight spaces, high-temperature areas, or applications requiring small spot detection.

Product Code	Description	Brand	Spec
AUTONICS-BF3RX	BF Series Fiber Optic Sensor	Autonics	Type: Fiber Optic \| Range: 3m \| Output: NPN \| Power: DC
AUTONICS-BF5R	BF Series Fiber Optic Sensor	Autonics	Type: Fiber Optic \| Range: 5m \| Output: NPN \| Power: DC
AUTONICS-BF3RX-AMP	BF Series Fiber Optic Sensor	Autonics	Type: Fiber Optic \| Range: 3m \| Output: NPN \| Power: DC
AUTONICS-BF5R-AMP	BF Series Fiber Optic Sensor	Autonics	Type: Fiber Optic \| Range: 5m \| Output: NPN \| Power: DC

[Autonics] BF Series Fiber Optic Sensors (PNP)

Fiber optic sensor amplifiers paired with fiber cables for detection in tight spaces, high-temperature areas, or applications requiring small spot detection.

Brand: Autonics Category: Fiber Optic 4 models

Fiber optic sensor amplifiers paired with fiber cables for detection in tight spaces, high-temperature areas, or applications requiring small spot detection.

Product Code	Description	Brand	Spec
AUTONICS-BF4R	BF Series Fiber Optic Sensor	Autonics	Type: Fiber Optic \| Range: 4m \| Output: PNP \| Power: DC
AUTONICS-BF6R	BF Series Fiber Optic Sensor	Autonics	Type: Fiber Optic \| Range: 6m \| Output: PNP \| Power: DC
AUTONICS-BF4R-AMP	BF Series Fiber Optic Sensor	Autonics	Type: Fiber Optic \| Range: 4m \| Output: PNP \| Power: DC
AUTONICS-BF6R-AMP	BF Series Fiber Optic Sensor	Autonics	Type: Fiber Optic \| Range: 6m \| Output: PNP \| Power: DC

[AUTONICS] FD / GD Series Retroreflective Type Fiber Optic Units

Retroreflective fiber optic units. Single-side mounting reduces installation effort. Plastic (FD) and glass (GD) fiber variants for general and high-temperature use.

Brand: Autonics Category: Fiber Optic 6 models

Retroreflective fiber optic units. Single-side mounting reduces installation effort. Plastic (FD) and glass (GD) fiber variants for general and high-temperature use.

Product Code	Brand	Spec
AUTONICS-FD-420-05	AUTONICS	Fiber optic unit \| FD Series \| Retroreflective plastic \| M4 cylindrical \| - \| - \| 0.5 m fiber length \| - \| plastic flexible fiber
AUTONICS-FD-420-10	AUTONICS	Fiber optic unit \| FD Series \| Retroreflective plastic \| M4 cylindrical \| - \| - \| 1 m fiber length \| - \| plastic flexible fiber
AUTONICS-FD-620-05	AUTONICS	Fiber optic unit \| FD Series \| Retroreflective plastic \| M6 cylindrical \| - \| - \| 0.5 m fiber length \| - \| plastic flexible fiber
AUTONICS-FD-620-10	AUTONICS	Fiber optic unit \| FD Series \| Retroreflective plastic \| M6 cylindrical \| - \| - \| 1 m fiber length \| - \| plastic flexible fiber
AUTONICS-GD-420-05	AUTONICS	Fiber optic unit \| GD Series \| Retroreflective glass \| M4 cylindrical \| - \| - \| 0.5 m fiber length \| - \| high-temp glass fiber
AUTONICS-GD-420-10	AUTONICS	Fiber optic unit \| GD Series \| Retroreflective glass \| M4 cylindrical \| - \| - \| 1 m fiber length \| - \| high-temp glass fiber

[AUTONICS] FL / GL Series Convergent Reflective Type Fiber Optic Units

Convergent reflective fiber optic units for narrow-spot detection. Plastic (FL) and glass (GL) fiber variants. Excellent background suppression performance.

Brand: Autonics Category: Fiber Optic 6 models

Convergent reflective fiber optic units for narrow-spot detection. Plastic (FL) and glass (GL) fiber variants. Excellent background suppression performance.

Product Code	Brand	Spec
AUTONICS-FL-420-05	AUTONICS	Fiber optic unit \| FL Series \| Convergent reflective plastic \| M4 cylindrical \| - \| - \| 0.5 m fiber length \| - \| narrow-spot detection
AUTONICS-FL-420-10	AUTONICS	Fiber optic unit \| FL Series \| Convergent reflective plastic \| M4 cylindrical \| - \| - \| 1 m fiber length \| - \| narrow-spot detection
AUTONICS-FL-620-05	AUTONICS	Fiber optic unit \| FL Series \| Convergent reflective plastic \| M6 cylindrical \| - \| - \| 0.5 m fiber length \| - \| narrow-spot detection
AUTONICS-FL-620-10	AUTONICS	Fiber optic unit \| FL Series \| Convergent reflective plastic \| M6 cylindrical \| - \| - \| 1 m fiber length \| - \| narrow-spot detection
AUTONICS-GL-420-05	AUTONICS	Fiber optic unit \| GL Series \| Convergent reflective glass \| M4 cylindrical \| - \| - \| 0.5 m fiber length \| - \| high-temp narrow-spot
AUTONICS-GL-420-10	AUTONICS	Fiber optic unit \| GL Series \| Convergent reflective glass \| M4 cylindrical \| - \| - \| 1 m fiber length \| - \| high-temp narrow-spot

[AUTONICS] FT / GT Series Through-Beam Type Fiber Optic Units

Through-beam fiber optic heads/units for use with BF amplifier series. Various tip shapes (cylindrical, rectangular, side-view, micro), bend radii, and lengths to fit diverse mounting requirements. Plastic (FT) and glass (GT) fiber variants.

Brand: Autonics Category: Fiber Optic 8 models

Product Code	Brand	Spec
AUTONICS-FT-420-05	AUTONICS	Fiber optic unit \| FT Series \| Through-beam plastic \| M4 cylindrical \| - \| - \| 0.5 m fiber length \| - \| plastic flexible fiber
AUTONICS-FT-420-10	AUTONICS	Fiber optic unit \| FT Series \| Through-beam plastic \| M4 cylindrical \| - \| - \| 1 m fiber length \| - \| plastic flexible fiber
AUTONICS-FT-620-05	AUTONICS	Fiber optic unit \| FT Series \| Through-beam plastic \| M6 cylindrical \| - \| - \| 0.5 m fiber length \| - \| plastic flexible fiber
AUTONICS-FT-620-10	AUTONICS	Fiber optic unit \| FT Series \| Through-beam plastic \| M6 cylindrical \| - \| - \| 1 m fiber length \| - \| plastic flexible fiber
AUTONICS-GT-420-05	AUTONICS	Fiber optic unit \| GT Series \| Through-beam glass \| M4 cylindrical \| - \| - \| 0.5 m fiber length \| - \| high-temp glass fiber
AUTONICS-GT-420-10	AUTONICS	Fiber optic unit \| GT Series \| Through-beam glass \| M4 cylindrical \| - \| - \| 1 m fiber length \| - \| high-temp glass fiber
AUTONICS-GT-620-05	AUTONICS	Fiber optic unit \| GT Series \| Through-beam glass \| M6 cylindrical \| - \| - \| 0.5 m fiber length \| - \| high-temp glass fiber
AUTONICS-GT-620-10	AUTONICS	Fiber optic unit \| GT Series \| Through-beam glass \| M6 cylindrical \| - \| - \| 1 m fiber length \| - \| high-temp glass fiber

[OMRON] — E32 Area Detection Fiber Units (11 mm and 30 mm Sensing Width)

OMRON E32 Series area detection fiber units for detecting presence across a sensing width. Through-beam area types: E32-T16PR / E32-T16JR (11 mm width, up to 3,100 mm sensing), E32-T16WR (30 mm width), E32-A13 (11 mm, variable range 40~420 mm, IP40). Array type E32-G16 (10 mm array, 10 mm sensing distance). Reflective array type E32-D36P1 (11 mm width, bend-resistant R4, IP67). All IP50 unless noted. Compatible with E3X-ZV, E3X-HD, and E3NX-FA. PDF ref: E32 full catalog, Area Detection section.

Brand: Omron Category: Fiber Optic 6 models

Product Code	Description	Brand	Spec
E32-T16PR 2M	Area through-beam 11 mm width, flexible R1, IP50, sensing up to 3,100 mm	OMRON	Model: E32-T16PR 2M \| Type: Through-beam Area Detection (Set of 2) \| Sensing Width: 11 mm \| Bending Radius: Flexible R1 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,700 mm \| Sensing Dist. FA ST: 2,550 mm \| Min. Sensing Object: 0.2 dia. / 0.07 dia. (at 300 mm sensing distance)
E32-T16JR 2M	Area through-beam 11 mm width variant, flexible R1, IP50	OMRON	Model: E32-T16JR 2M \| Type: Through-beam Area Detection (Set of 2) \| Sensing Width: 11 mm \| Bending Radius: Flexible R1 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,500 mm \| Sensing Dist. FA ST: 2,250 mm \| Min. Sensing Object: 0.2 dia. / 0.07 dia. (at 300 mm sensing distance)
E32-A13 2M	Area through-beam 11 mm width variable range 40~420 mm, IP40	OMRON	Model: E32-A13 2M \| Type: Through-beam Area Detection (Set of 2) \| Sensing Width: 11 mm \| IP Rating: IP40 \| Cable Length: 2 m (Free Cutting) \| Sensing Range ZV: 40 to 420 mm \| Sensing Range FA: 40 to 630 mm
E32-T16WR 2M	Area through-beam 30 mm width, flexible R1, IP50, sensing up to 4,000 mm	OMRON	Model: E32-T16WR 2M \| Type: Through-beam Area Detection (Set of 2) \| Sensing Width: 30 mm \| Bending Radius: Flexible R1 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 2,600 mm \| Sensing Dist. FA ST: 3,900 mm \| Min. Sensing Object: 0.3 dia. / 0.1 dia. (at 300 mm sensing distance)
E32-G16 2M	Array through-beam 10 mm array, sensing distance 10 mm, R5, IP50	OMRON	Model: E32-G16 2M \| Type: Through-beam Array \| Sensing Width: 10 mm array \| Bending Radius: R5 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist.: 10 mm \| Optical Axis Dia.: 0.5 dia.
E32-D36P1 2M	Reflective array 11 mm width, bend-resistant R4, IP67	OMRON	Model: E32-D36P1 2M \| Type: Reflective Array \| Sensing Width: 11 mm \| Bending Radius: Bend-resistant R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 300 mm \| Sensing Dist. FA ST: 450 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.

[OMRON] — E32 Bending-resistant and Disconnection-resistant Fiber Units

OMRON E32 Series bending-resistant and disconnection-resistant fiber units for harsh installation environments. Through-beam types: E32-T21 (M3), E32-T11 covered separately, E32-T25XB (square body). Reflective types: E32-D21 (M3), E32-D21B (M4), E32-D11 (M6), E32-D25XB (square body). All rated IP67, bend-resistant R4. Protective stainless steel spiral tube (E39-F32A/C/D) available separately. Compatible with E3X-ZV, E3X-HD, and E3NX-FA. PDF ref: E32 full catalog, Bending-resistant section.

Brand: Omron Category: Fiber Optic 6 models

Product Code	Description	Brand	Spec
E32-T21 2M	Through-beam M3 bend-resistant, 1.5 dia., IP67	OMRON	Model: E32-T21 2M \| Type: Through-beam Bend-resistant (Set of 2) \| Mounting: Threaded M3 \| Sensing Surface Dia.: 1.5 dia. \| Bending Radius: Bend-resistant R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 400 mm \| Sensing Dist. FA ST: 600 mm \| Min. Sensing Object: 0.5 dia.
E32-T25XB 2M	Through-beam square body bend-resistant, 0.5 dia., IP67	OMRON	Model: E32-T25XB 2M \| Type: Through-beam Bend-resistant (Set of 2) \| Mounting: Square body \| Sensing Surface Dia.: 0.5 dia. \| Bending Radius: Bend-resistant R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 300 mm \| Sensing Dist. FA ST: 450 mm \| Min. Sensing Object: 0.5 dia.
E32-D21 2M	Reflective M3 bend-resistant, IP67	OMRON	Model: E32-D21 2M \| Type: Reflective Bend-resistant \| Mounting: Threaded M3 \| Bending Radius: Bend-resistant R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 60 mm \| Sensing Dist. FA ST: 90 mm \| Note: Compatible with E39-F32A spiral tube for cable protection
E32-D21B 2M	Reflective M4 bend-resistant, IP67	OMRON	Model: E32-D21B 2M \| Type: Reflective Bend-resistant \| Mounting: Threaded M4 \| Bending Radius: Bend-resistant R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 140 mm \| Sensing Dist. FA ST: 210 mm \| Note: Compatible with E39-F32C spiral tube for cable protection
E32-D11 2M	Reflective M6 bend-resistant, IP67	OMRON	Model: E32-D11 2M \| Type: Reflective Bend-resistant \| Mounting: Threaded M6 \| Bending Radius: Bend-resistant R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 350 mm \| Sensing Dist. FA ST: 520 mm \| Note: Compatible with E39-F32D spiral tube for cable protection
E32-D25XB 2M	Reflective square body bend-resistant, IP67	OMRON	Model: E32-D25XB 2M \| Type: Reflective Bend-resistant \| Mounting: Square body \| Bending Radius: Bend-resistant R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 100 mm \| Sensing Dist. FA ST: 150 mm

[OMRON] — E32 Chemical and Oil-resistant Fiber Units (IP67/IP68, Cutting Oil Resistant)

OMRON E32 Series chemical and oil-resistant fiber units for harsh chemical environments. Through-beam types: E32-T12F (top-view, R40), E32-T11F (top-view, R4), E32-T14F (side-view, R40, 3 dia.), E32-T51F (top-view, heat-resistant up to 150°C). Reflective types: E32-D12F (chemical/oil resistant), E32-D11U (cable only chemical resistant). All IP67. Resistant to cutting oils as specified in JIS K 2241:2000. Note: E32-T11NF/T11NFS (oil-resistant, IP68G/IP68) registered separately in oil-resistant series. PDF ref: E32 full catalog, Chemical/Oil-resistant section.

Brand: Omron Category: Fiber Optic 6 models

Product Code	Description	Brand	Spec
E32-T12F 2M	Chemical/oil-resistant through-beam top-view, 4 dia., R40, IP67	OMRON	Model: E32-T12F 2M \| Type: Through-beam Chemical/Oil-resistant (Set of 2) \| View: Top-view \| Optical Axis Dia.: 4 dia. \| Bending Radius: R40 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 4,000 mm \| Sensing Dist. FA ST: 4,000 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-T11F 2M	Chemical/oil-resistant through-beam top-view, 4 dia., R4, IP67	OMRON	Model: E32-T11F 2M \| Type: Through-beam Chemical/Oil-resistant (Set of 2) \| View: Top-view \| Optical Axis Dia.: 4 dia. \| Bending Radius: R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 4,000 mm \| Sensing Dist. FA ST: 4,000 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-T14F 2M	Chemical/oil-resistant through-beam side-view, 3 dia., R40, IP67	OMRON	Model: E32-T14F 2M \| Type: Through-beam Chemical/Oil-resistant (Set of 2) \| View: Side-view \| Optical Axis Dia.: 3 dia. \| Bending Radius: R40 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 800 mm \| Sensing Dist. FA ST: 1,200 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-T51F 2M	Chemical/oil-resistant heat-resistant 150°C through-beam top-view, 4 dia., IP67	OMRON	Model: E32-T51F 2M \| Type: Through-beam Chemical/Oil-resistant Heat-resistant (Set of 2) \| View: Top-view \| Optical Axis Dia.: 4 dia. \| Heat Resistance: 150°C (continuous use up to 130°C) \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 2,800 mm \| Sensing Dist. FA ST: 4,000 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-D12F 2M	Chemical/oil-resistant reflective top-view, IP67	OMRON	Model: E32-D12F 2M \| Type: Reflective Chemical/Oil-resistant \| View: Top-view \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV HS: 130 mm \| Sensing Dist. FA HS: 190 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-D11U 2M	Reflective cable-only chemical-resistant, M6, R4, IP67	OMRON	Model: E32-D11U 2M \| Type: Reflective (Cable Chemical-resistant Only) \| Mounting: Threaded M6 \| Bending Radius: R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 350 mm \| Sensing Dist. FA ST: 520 mm \| Note: Cable sheath only is chemical-resistant; sensing head is standard

[OMRON] — E32 Flat and Sleeve Reflective Fiber Units (Space-saving, Close-range)

OMRON E32 Series space-saving reflective fiber units. Flat models (E32-D15/D25 series) mount directly in limited spaces; available in top-view, side-view, and flat-view orientations. Sleeve models allow detection away from installation point for stable close-range detection; includes M3/M4/M6 threaded sleeve types for various probe sizes. IP67 rated. Flexible fiber options available. Compatible with E3X-ZV, E3X-HD, and E3NX-FA fiber amplifiers. Cable length: 0.5 m, 1 m, or 2 m (free cutting). PDF ref: E418-E1 p.18-19, p.22-23.

Brand: Omron Category: Fiber Optic 16 models

Product Code	Description	Brand	Spec
E32-D15XR 2M	Flat top-view reflective, IP67	OMRON	Model: E32-D15XR 2M \| Type: Reflective Flat \| Mounting: Flat \| View: Top-view \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 350 mm \| Sensing Dist. FA ST: 520 mm
E32-D25XR 2M	Flat top-view reflective small, IP67	OMRON	Model: E32-D25XR 2M \| Type: Reflective Flat \| Mounting: Flat \| View: Top-view \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 60 mm \| Sensing Dist. FA ST: 90 mm
E32-D15YR 2M	Flat side-view reflective, IP67	OMRON	Model: E32-D15YR 2M \| Type: Reflective Flat \| Mounting: Flat \| View: Side-view \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 100 mm \| Sensing Dist. FA ST: 150 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-D25YR 2M	Flat side-view reflective small, flexible R1, IP67	OMRON	Model: E32-D25YR 2M \| Type: Reflective Flat \| Mounting: Flat \| View: Side-view \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 16 mm \| Sensing Dist. FA ST: 20 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-D15ZR 2M	Flat flat-view reflective, IP67	OMRON	Model: E32-D15ZR 2M \| Type: Reflective Flat \| Mounting: Flat \| View: Flat-view \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 100 mm \| Sensing Dist. FA ST: 150 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-D25ZR 2M	Flat flat-view reflective small, IP67	OMRON	Model: E32-D25ZR 2M \| Type: Reflective Flat \| Mounting: Flat \| View: Flat-view \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 16 mm \| Sensing Dist. FA ST: 20 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-D24R 2M	Sleeve side-view reflective, 2 dia., flexible R1, IP67	OMRON	Model: E32-D24R 2M \| Type: Reflective Sleeve \| Mounting: Sleeve 2 dia. tube \| View: Side-view \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 30 mm \| Sensing Dist. FA ST: 45 mm
E32-D24-S2 2M	Sleeve side-view reflective, 4.8 dia., R25, IP67	OMRON	Model: E32-D24-S2 2M \| Type: Reflective Sleeve \| Mounting: Sleeve 4.8 dia. tube \| View: Side-view \| Sleeve Bending Radius: 25 mm \| Bending Radius: R25 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 53 mm \| Sensing Dist. FA ST: 79 mm
E32-D331 2M	Sleeve top-view reflective, 2 dia., IP67	OMRON	Model: E32-D331 2M \| Type: Reflective Sleeve \| Mounting: Sleeve 2 dia. tube \| View: Top-view \| Sleeve Bending: Cannot be bent \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 6 mm \| Sensing Dist. FA ST: 9 mm
E32-D32-S1 0.5M	Sleeve top-view reflective, 3 dia., R4, IP67, 0.5m cable	OMRON	Model: E32-D32-S1 0.5M \| Type: Reflective Sleeve \| Mounting: Sleeve 3 dia. tube \| View: Top-view \| Bending Radius: R4 \| IP Rating: IP67 \| Cable Length: 0.5 m (Free Cutting) \| Sensing Dist. ZV ST: 27 mm \| Sensing Dist. FA ST: 40 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-D31-S1 0.5M	Sleeve top-view reflective, M3 threaded, IP67, 0.5m cable	OMRON	Model: E32-D31-S1 0.5M \| Type: Reflective Sleeve \| Mounting: Sleeve 0.82 dia. + M3 threaded \| View: Top-view \| Sleeve Bending: Cannot be bent \| IP Rating: IP67 \| Cable Length: 0.5 m (Free Cutting) \| Sensing Dist. ZV ST: 18 mm \| Sensing Dist. FA ST: 27 mm
E32-DC200F4R 2M	Sleeve top-view reflective bendable, M3 threaded, flexible R1, IP67	OMRON	Model: E32-DC200F4R 2M \| Type: Reflective Sleeve \| Mounting: Sleeve 1.2 dia. + M3 threaded \| View: Top-view \| Sleeve Bending Radius: 5 mm (bendable) \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 60 mm \| Sensing Dist. FA ST: 90 mm
E32-D22-S1 2M	Sleeve top-view reflective, 4 dia., R10, IP67	OMRON	Model: E32-D22-S1 2M \| Type: Reflective Sleeve \| Mounting: Sleeve 4 dia. tube \| View: Top-view \| Sleeve Bending Radius: 10 mm \| Bending Radius: R10 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 110 mm \| Sensing Dist. FA ST: 160 mm
E32-D21-S3 2M	Sleeve top-view reflective, M4 threaded, R10, IP67	OMRON	Model: E32-D21-S3 2M \| Type: Reflective Sleeve \| Mounting: Sleeve 1.65 dia. + M4 threaded \| View: Top-view \| Sleeve Bending Radius: 10 mm \| Bending Radius: R10 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 110 mm \| Sensing Dist. FA ST: 160 mm
E32-DC200BR 2M	Sleeve top-view reflective, M6 threaded, flexible R1, IP67	OMRON	Model: E32-DC200BR 2M \| Type: Reflective Sleeve \| Mounting: Sleeve 2.5 dia. + M6 threaded \| View: Top-view \| Sleeve Bending: Cannot be bent \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 350 mm \| Sensing Dist. FA ST: 520 mm
E32-D25-S3 2M	Sleeve top-view reflective small, 1.65 dia., R10, IP67	OMRON	Model: E32-D25-S3 2M \| Type: Reflective Sleeve \| Mounting: Sleeve 1.65 dia. tube \| View: Top-view \| Sleeve Bending Radius: 10 mm \| Bending Radius: R10 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 110 mm \| Sensing Dist. FA ST: 160 mm

[OMRON] — E32 Flat and Sleeve Through-beam Fiber Units (Space-saving, 1~3 dia.)

OMRON E32 Series space-saving through-beam fiber units. Flat models (E32-T15/T25 series) mount directly in limited spaces without special brackets; available in top-view, side-view, and flat-view orientations. Includes E32-LT35Z with Build-in Lens (3 dia., IP40, sensing distance up to 2,400 mm on E3X-ZV). Sleeve models (E32-T24R/E/T33/T21-S1/TC200BR) allow detection away from installation point for stable close-range detection of small objects. IP67 rated (IP40 for LT35Z). Compatible with E3X-ZV, E3X-HD, and E3NX-FA. Sold as matched pairs (set of 2). Cable length: 1 m or 2 m (free cutting). PDF ref: E418-E1 p.16-17, p.20-21.

Brand: Omron Category: Fiber Optic 12 models

Product Code	Description	Brand	Spec
E32-T15XR 2M	Flat top-view through-beam, 1 dia., IP67	OMRON	Model: E32-T15XR 2M \| Type: Through-beam Flat (Set of 2) \| Mounting: Flat \| View: Top-view \| Sensing Surface Dia.: 1 dia. \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,000 mm \| Sensing Dist. FA ST: 1,500 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-T25XR 2M	Flat top-view through-beam, 0.5 dia., IP67	OMRON	Model: E32-T25XR 2M \| Type: Through-beam Flat (Set of 2) \| Mounting: Flat \| View: Top-view \| Sensing Surface Dia.: 0.5 dia. \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 250 mm \| Sensing Dist. FA ST: 370 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-T15YR 2M	Flat side-view through-beam, 1 dia., IP67	OMRON	Model: E32-T15YR 2M \| Type: Through-beam Flat (Set of 2) \| Mounting: Flat \| View: Side-view \| Sensing Surface Dia.: 1 dia. \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 450 mm \| Sensing Dist. FA ST: 670 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-T25YR 2M	Flat side-view through-beam, 0.5 dia., flexible R1, IP67	OMRON	Model: E32-T25YR 2M \| Type: Through-beam Flat (Set of 2) \| Mounting: Flat \| View: Side-view \| Sensing Surface Dia.: 0.5 dia. \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 100 mm \| Sensing Dist. FA ST: 150 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-T15ZR 2M	Flat flat-view through-beam, 1 dia., IP67	OMRON	Model: E32-T15ZR 2M \| Type: Through-beam Flat (Set of 2) \| Mounting: Flat \| View: Flat-view \| Sensing Surface Dia.: 1 dia. \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 450 mm \| Sensing Dist. FA ST: 670 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-T25ZR 2M	Flat flat-view through-beam, 0.5 dia., IP67	OMRON	Model: E32-T25ZR 2M \| Type: Through-beam Flat (Set of 2) \| Mounting: Flat \| View: Flat-view \| Sensing Surface Dia.: 0.5 dia. \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 100 mm \| Sensing Dist. FA ST: 150 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-LT35Z 2M	Flat top-view Build-in Lens through-beam, 3 dia., IP40, GIGA Beam	OMRON	Model: E32-LT35Z 2M \| Type: Through-beam Flat Build-in Lens (Set of 2) \| Mounting: Flat \| View: Top-view \| Aperture Angle: Approx. 15° \| Sensing Surface Dia.: 3 dia. \| IP Rating: IP40 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,200 mm \| Sensing Dist. FA ST: 1,800 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia. \| Note: GIGA Beam Build-in Lens; high-power narrow-angle beam
E32-T24R 2M	Sleeve side-view through-beam, 1 dia., flexible R1, IP67	OMRON	Model: E32-T24R 2M \| Type: Through-beam Sleeve (Set of 2) \| Mounting: Sleeve 2 dia. tube \| View: Side-view \| Sensing Surface Dia.: 0.5 dia. \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 100 mm \| Sensing Dist. FA ST: 150 mm \| Min. Sensing Object: 0.5 dia.
E32-T24E 2M	Sleeve side-view through-beam, 0.81 dia., IP67	OMRON	Model: E32-T24E 2M \| Type: Through-beam Sleeve (Set of 2) \| Mounting: Sleeve 2.5 dia. tube \| View: Side-view \| Sensing Surface Dia.: 0.81 dia. \| Sleeve Bending: Cannot be bent \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 250 mm \| Sensing Dist. FA ST: 370 mm \| Min. Sensing Object: 0.5 dia.
E32-T33 1M	Sleeve top-view through-beam, 0.25 dia., R10, IP67, 1m cable	OMRON	Model: E32-T33 1M \| Type: Through-beam Sleeve (Set of 2) \| Mounting: Sleeve 3 dia. tube \| View: Top-view \| Sensing Surface Dia.: 0.25 dia. \| Bending Radius: R10 \| IP Rating: IP67 \| Cable Length: 1 m (Free Cutting) \| Sensing Dist. ZV ST: 90 mm \| Sensing Dist. FA ST: 130 mm \| Min. Sensing Object: 0.25 dia.
E32-T21-S1 2M	Sleeve top-view through-beam, 0.5 dia., M3 threaded, IP67	OMRON	Model: E32-T21-S1 2M \| Type: Through-beam Sleeve (Set of 2) \| Mounting: Sleeve 0.82 dia. tube + M3 threaded \| View: Top-view \| Sensing Surface Dia.: 0.5 dia. \| Sleeve Bending Radius: 5 mm \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 300 mm \| Sensing Dist. FA ST: 450 mm \| Min. Sensing Object: 0.5 dia.
E32-TC200BR 2M	Sleeve bendable top-view through-beam, 1 dia., M4 threaded, flexible R1, IP67	OMRON	Model: E32-TC200BR 2M \| Type: Through-beam Sleeve (Set of 2) \| Mounting: Sleeve 1.2 dia. tube + M4 threaded \| View: Top-view \| Sensing Surface Dia.: 1 dia. \| Sleeve Bending Radius: 5 mm (bendable, use E39-F11) \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,000 mm \| Sensing Dist. FA ST: 1,500 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.

[OMRON] — E32 Heat-resistant Fiber Units (100°C to 400°C)

OMRON E32 Series heat-resistant fiber units for high-temperature environments. Through-beam: E32-T51R (100°C), E32-T51 (150°C), E32-T54 (150°C side-view), E32-T81R-S (200°C), E32-T84S-S (200°C), E32-T64-2 (300°C, IP30), E32-T61-S (350°C, -60~350°C). Reflective: E32-D51R (100°C), E32-D51 (150°C), E32-D81R-S (200°C), E32-A08H2 (300°C, glass substrate alignment), E32-L64 (300°C, 1~5 mm), E32-L86 (200°C, 4~10 mm), E32-A09H2 (300°C, glass substrate mapping), E32-D611-S / E32-D61-S (350°C), E32-D73-S (400°C). For use with E39-F1/F16/F2 lens units (to 70°C) or E39-F1-33/F16 (heat-resistant). PDF ref: E32 full catalog, Heat-resistant section.

Brand: Omron Category: Fiber Optic 17 models

Product Code	Description	Brand	Spec
E32-T51R 2M	Heat-resistant 100°C through-beam, 1 dia., flexible R2, IP50	OMRON	Model: E32-T51R 2M \| Type: Through-beam Heat-resistant (Set of 2) \| Heat Resistance: 100°C (continuous use up to 90°C) \| Optical Axis Dia.: 1 dia. \| Bending Radius: Flexible R2 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 800 mm \| Sensing Dist. FA ST: 1,200 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-T51 2M	Heat-resistant 150°C through-beam, 1.5 dia., R35, IP67	OMRON	Model: E32-T51 2M \| Type: Through-beam Heat-resistant (Set of 2) \| Heat Resistance: 150°C (continuous use up to 130°C) \| Optical Axis Dia.: 1.5 dia. \| Bending Radius: R35 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,500 mm \| Sensing Dist. FA ST: 2,250 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-T54 2M	Heat-resistant 150°C through-beam side-view, 1.5 dia., R35, IP67	OMRON	Model: E32-T54 2M \| Type: Through-beam Heat-resistant Side-view (Set of 2) \| Heat Resistance: 150°C (continuous use up to 130°C) \| Optical Axis Dia.: 1.5 dia. \| Bending Radius: R35 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 450 mm \| Sensing Dist. FA ST: 670 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-T81R-S 2M	Heat-resistant 200°C through-beam, 0.7 dia., R10, IP67	OMRON	Model: E32-T81R-S 2M \| Type: Through-beam Heat-resistant (Set of 2) \| Heat Resistance: 200°C (see dimensions for part-specific ratings) \| Optical Axis Dia.: 0.7 dia. \| Bending Radius: R10 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 550 mm \| Sensing Dist. FA ST: 820 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-T84S-S 2M	Heat-resistant 200°C through-beam, 1.7 dia., R25, IP67	OMRON	Model: E32-T84S-S 2M \| Type: Through-beam Heat-resistant (Set of 2) \| Heat Resistance: 200°C \| Optical Axis Dia.: 1.7 dia. \| Bending Radius: R25 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 2,600 mm \| Sensing Dist. FA ST: 3,900 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-T64-2 2M	Heat-resistant 300°C through-beam, R25, IP30	OMRON	Model: E32-T64-2 2M \| Type: Through-beam Heat-resistant (Set of 2) \| Heat Resistance: 300°C \| Bending Radius: R25 \| IP Rating: IP30 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 190 mm \| Sensing Dist. FA ST: 290 mm
E32-T61-S 2M	Heat-resistant 350°C through-beam, 1 dia., R25, IP67	OMRON	Model: E32-T61-S 2M \| Type: Through-beam Heat-resistant (Set of 2) \| Heat Resistance: -60 to 350°C (-40 to 200°C with E39-F1/F2; -40 to 350°C with E39-F16) \| Optical Axis Dia.: 1 dia. \| Bending Radius: R25 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 900 mm \| Sensing Dist. FA ST: 1,350 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-D51R 2M	Heat-resistant 100°C reflective, flexible R2, IP50	OMRON	Model: E32-D51R 2M \| Type: Reflective Heat-resistant \| Heat Resistance: 100°C (continuous use up to 90°C) \| Bending Radius: Flexible R2 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 280 mm \| Sensing Dist. FA ST: 420 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-D51 2M	Heat-resistant 150°C reflective, R35, IP67	OMRON	Model: E32-D51 2M \| Type: Reflective Heat-resistant \| Heat Resistance: 150°C (continuous use up to 130°C) \| Bending Radius: R35 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 450 mm \| Sensing Dist. FA ST: 670 mm
E32-D81R-S 2M	Heat-resistant 200°C reflective, R10, IP67	OMRON	Model: E32-D81R-S 2M \| Type: Reflective Heat-resistant \| Heat Resistance: 200°C (see dimensions for part-specific ratings) \| Bending Radius: R10 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 180 mm \| Sensing Dist. FA ST: 270 mm
E32-A08H2 2M	Heat-resistant 300°C reflective glass alignment, 10~20 mm range, R25, IP30	OMRON	Model: E32-A08H2 2M \| Type: Reflective Heat-resistant (Glass Substrate Alignment) \| Heat Resistance: 300°C \| Bending Radius: R25 \| IP Rating: IP30 \| Cable Length: 2 m (Free Cutting) \| Sensing Range: 10 to 20 mm \| Standard Sensing Object: Soda glass with reflection factor of 7%
E32-L64 2M	Heat-resistant 300°C reflective, 1~5 mm range, IP50	OMRON	Model: E32-L64 2M \| Type: Reflective Heat-resistant \| Heat Resistance: 300°C \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Range: 1 to 5 mm
E32-L86 2M	Heat-resistant 200°C reflective, 4~10 mm range, IP60	OMRON	Model: E32-L86 2M \| Type: Reflective Heat-resistant \| Heat Resistance: 200°C \| IP Rating: IP60 \| Cable Length: 2 m (Free Cutting) \| Sensing Range: 4 to 10 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-A09H2 2M	Heat-resistant 300°C reflective glass mapping, 20~30 mm range, R25, IP40	OMRON	Model: E32-A09H2 2M \| Type: Reflective Heat-resistant (Glass Substrate Mapping) \| Heat Resistance: 300°C \| Bending Radius: R25 \| IP Rating: IP40 \| Cable Length: 2 m (Free Cutting) \| Sensing Range: 20 to 30 mm (center 25 mm) \| Standard Sensing Object: End surface of soda glass t=0.7 mm, rounded edges
E32-D611-S 2M	Heat-resistant 350°C reflective, R25, IP67	OMRON	Model: E32-D611-S 2M \| Type: Reflective Heat-resistant \| Heat Resistance: 350°C \| Bending Radius: R25 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 180 mm \| Sensing Dist. FA ST: 270 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-D61-S 2M	Heat-resistant 350°C reflective variant, IP67	OMRON	Model: E32-D61-S 2M \| Type: Reflective Heat-resistant \| Heat Resistance: 350°C \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 180 mm \| Sensing Dist. FA ST: 270 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-D73-S 2M	Heat-resistant 400°C reflective, sleeve bending radius 10 mm	OMRON	Model: E32-D73-S 2M \| Type: Reflective Heat-resistant \| Heat Resistance: 400°C \| Sleeve Bending Radius: 10 mm \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 120 mm \| Sensing Dist. FA ST: 180 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.

[OMRON] — E32 High-power Beam Fiber Units (Long-distance, Dust-resistant)

OMRON E32 Series high-power beam fiber units for long-distance and dust-resistant detection. E32-T17L 10M: ultra-long sensing up to 20 m (M14, 10 m cable per side), aperture 10°. E32-T14 2M: side-view 30° through-beam, 4 dia. Build-in Lens, IP67. E32-T11 2M: M4 top-view bend-resistant through-beam. E32-D16 2M: narrow-angle 4° reflective with dual integrated lenses, BGS-capable, sensing range 40~2,800 mm (E3X-ZV) / 40~4,200 mm (E3NX-FA), IP40. Lens Units (E39-F1/F16/F2) available separately to further extend sensing distance. PDF ref: E418-E1 p.28-30.

Brand: Omron Category: Fiber Optic 4 models

Product Code	Description	Brand	Spec
E32-T17L 10M	Through-beam M14 top-view 10°, 10 dia. lens, 10m cable, sensing up to 20m, IP67	OMRON	Model: E32-T17L 10M \| Type: Through-beam (Set of 2) \| Mounting: Threaded M14 \| View: Top-view \| Aperture Angle: 10° \| Sensing Surface Dia.: 10 dia. (PMMA lens) \| Bending Radius: R25 \| IP Rating: IP67 \| Cable Length: 10 m (Free Cutting) \| Sensing Dist. ZV ST: 20,000 mm \| Sensing Dist. FA ST: 20,000 mm \| Incident Level vs Reference: ×1700 \| Note: 10 m fiber per side; total sensing distance 20,000 mm
E32-T14 2M	Through-beam side-view 30°, 4 dia. Build-in Lens, R25, IP67	OMRON	Model: E32-T14 2M \| Type: Through-beam (Set of 2) \| Mounting: Side-view \| Aperture Angle: 30° \| Sensing Surface Dia.: 4 dia. (PMMA Build-in Lens) \| Bending Radius: R25 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 4,000 mm \| Sensing Dist. FA ST: 4,000 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-T11 2M	Through-beam M4 top-view bend-resistant, 1 dia., IP67	OMRON	Model: E32-T11 2M \| Type: Through-beam (Set of 2) \| Mounting: Threaded M4 \| View: Top-view \| Sensing Surface Dia.: 1 dia. \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,350 mm \| Sensing Dist. FA ST: 2,020 mm \| Note: Bend-resistant; compatible with E39-F1/F16/F2 lens units for extended range
E32-D16 2M	Reflective top-view narrow 4°, dual integrated lens, bend-resistant R4, IP40	OMRON	Model: E32-D16 2M \| Type: Reflective (Dual Integrated Lens, Narrow-angle) \| Mounting: Flat, top-view \| Aperture Angle: 4° \| Sensing Surface: Two, 5.8 dia. lenses \| Bending Radius: Bend-resistant R4 \| IP Rating: IP40 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 40 to 1,400 mm \| Sensing Dist. FA ST: 40 to 2,100 mm \| Incident Level vs Reference: ×17 \| Note: Variable sensing range; BGS-capable narrow-angle reflective

[OMRON] — E32 LENS in Nut Type Fiber Unit (15° GIGA Beam, Through-beam / Reflective / Retro-reflective)

OMRON E32 LENS in Nut Type Fiber Unit — Build-in lens + Nut-type mounting in a single product. 15° narrow aperture angle (GIGA Beam) with high power output for stable detection: approx. 10× light intensity vs non-lens through-beam (E32-LT11N) and approx. 3× S/N ratio vs non-lens reflective (E32-LD11N). Reduces false detection from light reflection in narrow spaces. Patented tool-fit nut structure — spanner inserts deep into nut without contacting fiber cable, preventing fiber damage during installation. Single-nut tightening simplifies mounting. No lens attachment work, no torque management, no risk of lost lens. Includes E39-RP1 Reflector for E32-LR11NP transparent-object detection (required pair). Compatible with E3NX-FA and E3X-HD smart fiber amplifiers. IP50, −40 to +70 °C, bend-resistant R2 cable. Patent registered.

Brand: Omron Category: Fiber Optic 4 models

Product Code	Description	Brand	Spec
E32-LT11N 2M	E32-LT11N — LENS in Nut Type through-beam fiber unit, M4, 15° aperture	OMRON	Type: Through-beam (透過形) \| Aperture Angle: 15° (LENS in GIGA Beam, vs conventional 60° non-lens) \| Mounting Size: M4 \| Mounting Thread: M4×0.7 (trivalent chrome-plated zinc alloy) \| Sensing Surface: 2.3 mm dia. (methacrylate resin lens) \| Optical Axis Diameter: 2.3 mm dia. \| Min. Sensing Object (E3X-HD): 0.1 mm dia. \| Min. Sensing Object (E3NX-FA): 0.03 mm dia. \| Sensing Distance — E3X-HD GIGA: 4,000 mm (2m each side, total 4,000mm) \| Sensing Distance — E3X-HD HS: 4,000 mm \| Sensing Distance — E3X-HD ST: 3,500 mm \| Sensing Distance — E3X-HD SHS: 920 mm \| Sensing Distance — E3NX-FA GIGA: 4,000 mm \| Sensing Distance — E3NX-FA HS: 3,450 mm \| Sensing Distance — E3NX-FA ST: 4,000 mm \| Sensing Distance — E3NX-FA SHS: 920 mm \| Light Intensity Advantage: Approx. 10× vs non-lens E32-T11N (HS mode at 1 m, E3NX-FA) \| Mounting Hardware: Hex nut opposite side 7 mm / thickness 2.4 mm (nickel-plated brass) + toothed washer (nickel-plated iron) \| Recommended Mounting Hole: 4.2 +0.5/0 mm dia. \| Tightening Torque: 0.78 N·m \| Tensile Strength: 29.4 N \| Weight (Packed): approx. 40 g \| Cable Configuration: 2 m on each side (4,000 mm total sensing path) \| Emitter/Receiver Differentiation: None (interchangeable) \| Form Factor: Nut Type (ナット型) — tool-fit structure, spanner does not contact cable \| Mounting Method: Single nut tightening with head fixed by spanner (vs conventional 2-nut clamping) \| Tool-Fit Feature: Spanner inserted deep into nut without contacting fiber cable — prevents fiber damage \| Cable Routing: Wide cable outlet for relaxed routing \| Degree of Protection: IP50 (standard for E32 LENS in series) \| Ambient Temperature: −40 to +70 °C \| Bending Radius of Cable: Bend-resistant R2 \| Unbendable Length: 0 mm \| Cable Sheath Material: Polyethylene \| Fiber Core Material: Plastic \| Cable Length: 2 m \| Free-cut: Supported \| Compatible Amplifiers: E3NX-FA series / E3X-HD series (E3X-DA-S series for C21N/D21N via E39-F9W13 attachment) \| Note: E3X-HD0 Communication Unit Connector model was discontinued October 2024
E32-LD11N 2M	E32-LD11N — LENS in Nut Type reflective fiber unit, M6, 15° aperture	OMRON	Type: Reflective (反射形) \| Aperture Angle: 15° (LENS in GIGA Beam, vs conventional 60° non-lens) \| Mounting Size: M6 \| Mounting Thread: M6×0.75 (trivalent chrome-plated zinc alloy) \| Sensing Surface: 2× 1.5 mm dia. (methacrylate resin lens) \| Min. Sensing Object (E3X-HD): 0.1 mm dia. \| Min. Sensing Object (E3NX-FA): 0.03 mm dia. \| Sensing Distance — E3X-HD GIGA: 840 mm \| Sensing Distance — E3X-HD HS: 240 mm \| Sensing Distance — E3X-HD ST: 350 mm \| Sensing Distance — E3X-HD SHS: 100 mm \| Sensing Distance — E3NX-FA GIGA: 1,260 mm \| Sensing Distance — E3NX-FA HS: 360 mm \| Sensing Distance — E3NX-FA ST: 520 mm \| Sensing Distance — E3NX-FA SHS: 100 mm \| Standard Sensing Object: Glossy white paper \| S/N Ratio Advantage: Approx. 3× vs non-lens E32-D11R (E3NX-FA HS mode, matte black workpiece, QR code 10mm□ at 50mm detection distance) \| Mounting Hardware: Hex nut opposite side 10 mm / thickness 2.4 mm (nickel-plated brass) + toothed washer (nickel-plated iron) \| Recommended Mounting Hole: 6.2 +0.5/0 mm dia. \| Tightening Torque: 0.98 N·m \| Tensile Strength: 29.4 N \| Weight (Packed): approx. 40 g \| Form Factor: Nut Type (ナット型) — tool-fit structure, spanner does not contact cable \| Mounting Method: Single nut tightening with head fixed by spanner (vs conventional 2-nut clamping) \| Tool-Fit Feature: Spanner inserted deep into nut without contacting fiber cable — prevents fiber damage \| Cable Routing: Wide cable outlet for relaxed routing \| Degree of Protection: IP50 (standard for E32 LENS in series) \| Ambient Temperature: −40 to +70 °C \| Bending Radius of Cable: Bend-resistant R2 \| Unbendable Length: 0 mm \| Cable Sheath Material: Polyethylene \| Fiber Core Material: Plastic \| Cable Length: 2 m \| Free-cut: Supported \| Compatible Amplifiers: E3NX-FA series / E3X-HD series (E3X-DA-S series for C21N/D21N via E39-F9W13 attachment) \| Note: E3X-HD0 Communication Unit Connector model was discontinued October 2024
E32-LR11NP 2M	E32-LR11NP — LENS in Nut Type retro-reflective fiber unit for transparent objects, M6	OMRON	Type: Retro-reflective for transparent object detection (透明体検出用回帰反射形) \| Aperture Angle: 15° (LENS in) \| Mounting Size: M6 \| Mounting Thread: M6×0.75 (trivalent chrome-plated zinc alloy) \| Sensing Surface: 2× 1.5 mm dia. (optical filter) \| Required Reflector: E39-RP1 (sold separately, available as separate MPN in this family — included in catalog) \| Sensing Distance — E3X-HD GIGA: 1,350 mm \| Sensing Distance — E3X-HD HS: 1,000 mm \| Sensing Distance — E3X-HD ST: 1,200 mm \| Sensing Distance — E3X-HD SHS: 550 mm \| Sensing Distance — E3NX-FA GIGA: 2,020 mm \| Sensing Distance — E3NX-FA HS: 1,500 mm \| Sensing Distance — E3NX-FA ST: 1,800 mm \| Sensing Distance — E3NX-FA SHS: 550 mm \| Note (Retro-reflective): Highly reflective objects may produce incident-light state due to direct reflection. Some transparent materials may not be detected stably — verify in advance. \| Mounting Hardware: Hex nut opposite side 10 mm / thickness 2.4 mm (nickel-plated brass) + toothed washer (nickel-plated iron) \| Recommended Mounting Hole: 6.2 +0.5/0 mm dia. \| Tightening Torque: 0.98 N·m \| Tensile Strength: 29.4 N \| Weight (Packed): approx. 40 g \| Form Factor: Nut Type (ナット型) — tool-fit structure, spanner does not contact cable \| Mounting Method: Single nut tightening with head fixed by spanner (vs conventional 2-nut clamping) \| Tool-Fit Feature: Spanner inserted deep into nut without contacting fiber cable — prevents fiber damage \| Cable Routing: Wide cable outlet for relaxed routing \| Degree of Protection: IP50 (standard for E32 LENS in series) \| Ambient Temperature: −40 to +70 °C \| Bending Radius of Cable: Bend-resistant R2 \| Unbendable Length: 0 mm \| Cable Sheath Material: Polyethylene \| Fiber Core Material: Plastic \| Cable Length: 2 m \| Free-cut: Supported \| Compatible Amplifiers: E3NX-FA series / E3X-HD series (E3X-DA-S series for C21N/D21N via E39-F9W13 attachment) \| Note: E3X-HD0 Communication Unit Connector model was discontinued October 2024
E39-RP1	E39-RP1 Reflector for E32-LR11NP retro-reflective fiber unit	OMRON	Type: Reflector for E32-LR11NP Retro-reflective Fiber Unit \| Compatible Sensor: E32-LR11NP (LENS in Nut Type Retro-reflective) \| Application: Transparent object detection (films, bottles, sheets etc.) \| Ambient Temperature: −40 to +60 °C (narrower than E32-LR11NP sensor body −40 to +70 °C) \| Mounting: Separate reflector — install opposite to sensor head \| Note: Reflector required for retro-reflective operation. Not included with E32-LR11NP sensor (order separately, registered as separate MPN in this family for buyer convenience). \| Oil Resistance: 4 years (verified by OMRON's accelerated evaluation tests) \| Cable Sheath: Fluororesin (patent pending) — resists both water-soluble and water-insoluble cutting oils \| Evaluation Standard: Passed IP67G (JIS C 0920 Annex 1) and OMRON's Oil-resistant Component Evaluation Standards

[OMRON] — E32 Limited-reflective and Retro-reflective Fiber Units (BGS, Transparent Object Detection)

OMRON E32 Series limited-reflective (BGS) and retro-reflective fiber units. Limited-reflective types suppress background interference for detecting transparent objects and glass: E32-L16-N (flat-view, 0~15 mm range, soda glass 7% reflectance), E32-L24S (flat-view, 0~4 mm, small size), E32-L25L (side-view, 5.4~9 mm). Retro-reflective types with M.S.R. (Mirror Surface Rejection) function: E32-LR11NP 2M with E39-R1R reflector for film detection (M6 hex-shaped, sensing up to 1,350 mm on ZV), E32-R16 (square, 150~1,500 mm range), E32-R21 (M6 threaded, 10~250 mm). E39-RP1 reflector included with E32-LR11NP as required pair. PDF ref: E32 full catalog, Limited-reflective and Retro-reflective sections.

Brand: Omron Category: Fiber Optic 6 models

Product Code	Description	Brand	Spec
E32-L16-N 2M	Limited-reflective flat-view BGS, 0~15 mm range, soda glass 7% reflectance, R25, IP40	OMRON	Model: E32-L16-N 2M \| Type: Limited-reflective (BGS) \| View: Flat-view \| Bending Radius: R25 \| IP Rating: IP40 \| Cable Length: 2 m (Free Cutting) \| Sensing Range ZV: 0 to 15 mm \| Sensing Range FA: 0 to 15 mm \| Standard Sensing Object: Soda glass with reflection factor of 7% \| Note: For glass presence detection; suppress background interference
E32-L24S 2M	Limited-reflective flat-view BGS small size, 0~4 mm range, R10, IP50	OMRON	Model: E32-L24S 2M \| Type: Limited-reflective (BGS, Small Size) \| View: Flat-view \| Bending Radius: R10 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Range ZV: 0 to 4 mm \| Sensing Range FA: 0 to 4 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-L25L 2M	Limited-reflective side-view BGS, 5.4~9 mm range (center 7.2 mm), R10, IP50	OMRON	Model: E32-L25L 2M \| Type: Limited-reflective (BGS, Side-view) \| View: Side-view \| Bending Radius: R10 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Range ZV: 5.4 to 9 mm (center 7.2 mm) \| Sensing Range FA: 5.4 to 9 mm (center 7.2 mm)
E32-LR11NP 2M	Retro-reflective M6 hex-shaped MSR film detection, flexible R2, IP50 + E39-RP1 reflector	OMRON	Model: E32-LR11NP 2M \| Type: Retro-reflective MSR (Required pair: E39-RP1 reflector) \| Mounting: Hex-shaped M6 \| Aperture Angle: Approx. 15° \| Bending Radius: Flexible R2 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,200 mm \| Sensing Dist. FA ST: 1,800 mm \| Note: M.S.R. function; E39-RP1 reflector required and included as standard pair; film detection capable
E32-R16 2M	Retro-reflective square body MSR, 150~1,500 mm range, R25, IP66	OMRON	Model: E32-R16 2M \| Type: Retro-reflective MSR (Square) \| Mounting: Square body \| Bending Radius: R25 \| IP Rating: IP66 \| Cable Length: 2 m (Free Cutting) \| Sensing Range ZV: 150 to 1,500 mm \| Sensing Range FA: 150 to 1,500 mm \| Min. Sensing Object: 0.2 dia. / 0.07 dia. \| Note: M.S.R. function; use with appropriate reflector
E32-R21 2M	Retro-reflective M6 threaded MSR, 10~250 mm range, R10, IP67	OMRON	Model: E32-R21 2M \| Type: Retro-reflective MSR (Threaded M6) \| Mounting: Threaded M6 \| Bending Radius: R10 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Range ZV: 10 to 250 mm \| Sensing Range FA: 10 to 370 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia. \| Note: M.S.R. function; use with appropriate reflector

[OMRON] — E32 Narrow View Through-beam Fiber Units (Detection Across Clearance, 1.5°~4°)

OMRON E32 Series narrow-view through-beam fiber units for detection across clearances and wafer mapping applications. E32-A03/A03-1: 1.5° aperture, 3 mm profile, sensing up to 3,220 mm (ZV) / 4,000 mm (FA). E32-A04: 3.4° aperture, 2 mm profile, optical axis 1.2 dia. E32-T24SR/T24S: 4° aperture, flexible/R10, sensing up to 4,000 mm. E32-T22S: 4° aperture, top-view, 1.7 dia. optical axis. All IP50. Compatible with E3X-ZV, E3X-HD, and E3NX-FA. Also used for FPD/semiconductor wafer mapping (see FPD/Semi section). PDF ref: E32 full catalog, Narrow View section.

Brand: Omron Category: Fiber Optic 6 models

Product Code	Description	Brand	Spec
E32-A03 2M	Narrow view 1.5° side-view through-beam, 2 dia. optical axis, flexible R1, IP50	OMRON	Model: E32-A03 2M \| Type: Through-beam Narrow View (Set of 2) \| Aperture Angle: 1.5° \| Profile Thickness: 3 mm \| View: Side-view \| Optical Axis Dia.: 2 dia. \| Bending Radius: Flexible R1 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,780 mm \| Sensing Dist. FA ST: 2,670 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-A03-1 2M	Narrow view 1.5° side-view through-beam, 2 dia. optical axis, R10, IP50	OMRON	Model: E32-A03-1 2M \| Type: Through-beam Narrow View (Set of 2) \| Aperture Angle: 1.5° \| Profile Thickness: 3 mm \| View: Side-view \| Optical Axis Dia.: 2 dia. \| Bending Radius: R10 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,780 mm \| Sensing Dist. FA ST: 2,670 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-A04 2M	Narrow view 3.4° side-view through-beam, 1.2 dia. optical axis, R10, IP50	OMRON	Model: E32-A04 2M \| Type: Through-beam Narrow View (Set of 2) \| Aperture Angle: 3.4° \| Profile Thickness: 2 mm \| View: Side-view \| Optical Axis Dia.: 1.2 dia. \| Bending Radius: R10 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 680 mm \| Sensing Dist. FA ST: 1,020 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-T24SR 2M	Narrow view 4° side-view through-beam, 2 dia. optical axis, flexible R1, IP50	OMRON	Model: E32-T24SR 2M \| Type: Through-beam Narrow View (Set of 2) \| Aperture Angle: 4° \| View: Side-view \| Optical Axis Dia.: 2 dia. \| Bending Radius: Flexible R1 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 2,200 mm \| Sensing Dist. FA ST: 3,300 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-T24S 2M	Narrow view 4° side-view through-beam, 2 dia. optical axis, R10, IP50	OMRON	Model: E32-T24S 2M \| Type: Through-beam Narrow View (Set of 2) \| Aperture Angle: 4° \| View: Side-view \| Optical Axis Dia.: 2 dia. \| Bending Radius: R10 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 2,600 mm \| Sensing Dist. FA ST: 3,900 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-T22S 2M	Narrow view 4° top-view through-beam, 1.7 dia. optical axis, flexible R1, IP50	OMRON	Model: E32-T22S 2M \| Type: Through-beam Narrow View (Set of 2) \| Aperture Angle: 4° \| View: Top-view \| Optical Axis Dia.: 1.7 dia. \| Bending Radius: Flexible R1 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 3,800 mm \| Sensing Dist. FA ST: 4,000 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.

[OMRON] — E32 Nut Type Fiber Unit (Non-LENS in, Coaxial / Diffuse Reflective)

OMRON E32 Nut Type Fiber Unit — Non-LENS in conventional 60° aperture reflective fiber units with patented tool-fit nut mounting structure. E32-C21N (M3 Coaxial Reflective) features 9 receiving fibers (vs 4 in conventional E32-C31N) for improved stable detection of low-reflective workpieces, fluttering objects, and angled targets. Small-spot lens attachment compatible. E32-D21N (M4 Diffuse Reflective) — general-purpose M4 size with nut-type mounting reinforcement. Patented tool-fit structure — spanner inserts deep into nut without contacting fiber cable, preventing fiber damage during installation. Single-nut tightening simplifies mounting. Fiber attachment E39-F9W13 included for compatibility with E3NX-FA / E3X-HD / E3X-DA-S amplifiers. IP50, −40 to +70 °C, bend-resistant R2 cable.

Brand: Omron Category: Fiber Optic 2 models

Product Code	Description	Brand	Spec
E32-C21N 2M	E32-C21N — Nut Type coaxial reflective fiber unit, M3, 9 receiving fibers	OMRON	Type: Coaxial Reflective (同軸反射形) \| Aperture Angle: approx. 60° (conventional, non-lens) \| Mounting Size: M3 \| Mounting Thread: M3×0.5 (trivalent chrome-plated zinc alloy) \| Receiving Fiber Count: 9 fibers (vs 4 fibers in conventional E32-C31N — improved stability) \| Emitter Fiber: 1× 0.5 mm dia. (white-line marked) \| Receiver Fiber: 9× 0.25 mm dia. \| Sensing Distance — E3X-HD GIGA: 290 mm \| Sensing Distance — E3X-HD HS: 90 mm \| Sensing Distance — E3X-HD ST: 130 mm \| Sensing Distance — E3X-HD SHS: 39 mm \| Sensing Distance — E3NX-FA GIGA: 440 mm \| Sensing Distance — E3NX-FA HS: 130 mm \| Sensing Distance — E3NX-FA ST: 190 mm \| Sensing Distance — E3NX-FA SHS: 39 mm \| Standard Sensing Object: White paper \| Min. Sensing Object (E3X-HD): 5 μm dia. \| Min. Sensing Object (E3NX-FA): 2 μm dia. \| Mounting Hardware: Hex nut opposite side 5.5 mm / thickness 1.7 mm (nickel-plated brass) + toothed washer (nickel-plated iron) \| Recommended Mounting Hole: 3.2 +0.5/0 mm dia. \| Tightening Torque: 0.29 N·m \| Tensile Strength: 9.8 N \| Weight (Packed): approx. 30 g \| Fiber Attachment Included: E39-F9W13 (for E3NX-FA / E3X-HD / E3X-DA-S series) — for E3X-SD/E3X-NA 8mm-pitch amplifiers use bundled E39-F9-7 \| Application: Small-spot lens attachment compatible — low-reflective workpieces, fluttering / angled object detection \| Form Factor: Nut Type (ナット型) — tool-fit structure, spanner does not contact cable \| Mounting Method: Single nut tightening with head fixed by spanner (vs conventional 2-nut clamping) \| Tool-Fit Feature: Spanner inserted deep into nut without contacting fiber cable — prevents fiber damage \| Cable Routing: Wide cable outlet for relaxed routing \| Degree of Protection: IP50 (standard for E32 LENS in series) \| Ambient Temperature: −40 to +70 °C \| Bending Radius of Cable: Bend-resistant R2 \| Unbendable Length: 0 mm \| Cable Sheath Material: Polyethylene \| Fiber Core Material: Plastic \| Cable Length: 2 m \| Free-cut: Supported \| Compatible Amplifiers: E3NX-FA series / E3X-HD series (E3X-DA-S series for C21N/D21N via E39-F9W13 attachment) \| Note: E3X-HD0 Communication Unit Connector model was discontinued October 2024
E32-D21N 2M	E32-D21N — Nut Type diffuse reflective fiber unit, M4	OMRON	Type: Diffuse Reflective (拡散反射形) \| Aperture Angle: approx. 60° (conventional, non-lens) \| Mounting Size: M4 \| Mounting Thread: M4×0.7 (trivalent chrome-plated zinc alloy) \| Sensing Surface: 2× 1 mm dia. (methacrylate resin) \| Sensing Distance — E3X-HD GIGA: 840 mm \| Sensing Distance — E3X-HD HS: 240 mm \| Sensing Distance — E3X-HD ST: 350 mm \| Sensing Distance — E3X-HD SHS: 100 mm \| Sensing Distance — E3NX-FA GIGA: 1,260 mm \| Sensing Distance — E3NX-FA HS: 360 mm \| Sensing Distance — E3NX-FA ST: 520 mm \| Sensing Distance — E3NX-FA SHS: 100 mm \| Standard Sensing Object: White paper \| Min. Sensing Object (E3X-HD): 0.1 mm dia. \| Min. Sensing Object (E3NX-FA): 0.03 mm dia. \| Mounting Hardware: Hex nut opposite side 7 mm / thickness 2.4 mm (nickel-plated brass) + toothed washer (nickel-plated iron) \| Recommended Mounting Hole: 4.2 +0.5/0 mm dia. \| Tightening Torque: 0.78 N·m \| Tensile Strength: 9.8 N \| Weight (Packed): approx. 30 g \| Fiber Attachment Included: E39-F9W13 (for E3NX-FA / E3X-HD / E3X-DA-S series) \| Application: General-purpose M4 reflective detection with reinforced nut-type mounting \| Form Factor: Nut Type (ナット型) — tool-fit structure, spanner does not contact cable \| Mounting Method: Single nut tightening with head fixed by spanner (vs conventional 2-nut clamping) \| Tool-Fit Feature: Spanner inserted deep into nut without contacting fiber cable — prevents fiber damage \| Cable Routing: Wide cable outlet for relaxed routing \| Degree of Protection: IP50 (standard for E32 LENS in series) \| Ambient Temperature: −40 to +70 °C \| Bending Radius of Cable: Bend-resistant R2 \| Unbendable Length: 0 mm \| Cable Sheath Material: Polyethylene \| Fiber Core Material: Plastic \| Cable Length: 2 m \| Free-cut: Supported \| Compatible Amplifiers: E3NX-FA series / E3X-HD series (E3X-DA-S series for C21N/D21N via E39-F9W13 attachment) \| Note: E3X-HD0 Communication Unit Connector model was discontinued October 2024

[OMRON] — E32 Small-Spot Reflective Fiber Units (Minute Object Detection, 0.1~6 dia. spot)

OMRON E32 Series small-spot reflective fiber units for minute object detection. Variable-spot types (E32-C42 with E39-F3A/F17 lens unit): spot diameter 0.1~1.6 dia., center distance 6~30 mm. Small-spot lens unit types (E32-C41 with E39-F3A-5/F3B, E32-C31/C21N with E39-F3A-5/F3B/F18): spot diameter 0.1~3 dia., center distance 7~50 mm. Integrated lens types (E32-C42S: 0.1 dia. spot at 5 mm, E32-L15: 6 dia. spot at 50 mm) — no lens unit required. Hex-shaped coaxial types (E32-C21N, E32-D21N) for compact installations. IP50/IP67. Compatible with E3X-ZV, E3X-HD, and E3NX-FA. Lens Units (E39-F3A/F17/F3A-5/F3B/F18/F3C) sold separately. PDF ref: E418-E1 p.24-27.

Brand: Omron Category: Fiber Optic 6 models

Product Code	Description	Brand	Spec
E32-C42 1M	Coaxial reflective for variable-spot lens (E39-F3A/F17), 6 dia., R25, 1m cable	OMRON	Model: E32-C42 1M \| Type: Reflective (Coaxial, Variable-spot) \| Mounting: Cylindrical 6 dia. \| Bending Radius: R25 \| IP Rating: IP67 \| Cable Length: 1 m (No Cutting) \| Compatible Lens Unit: E39-F3A (spot 0.1~0.6 dia., dist 6~15 mm) / E39-F17 (spot 0.3~1.6 dia., dist 10~30 mm) \| Note: Fiber attached with adhesive; cannot be removed
E32-C41 1M	Coaxial reflective for small-spot lens (E39-F3A-5/F3B), 5 dia., R25, 1m cable	OMRON	Model: E32-C41 1M \| Type: Reflective (Coaxial, Small-spot) \| Mounting: Threaded M3, 5 dia. \| Bending Radius: R25 \| IP Rating: IP67 \| Cable Length: 1 m (No Cutting) \| Compatible Lens Unit: E39-F3A-5 (spot 0.1 dia., dist 7 mm) / E39-F3B (spot 0.2 dia., dist 17 mm) \| Note: Fiber attached with adhesive; cannot be removed
E32-C42S 1M	Integrated lens short-distance small-spot, 0.1 dia. spot at 5 mm, R25, IP50	OMRON	Model: E32-C42S 1M \| Type: Reflective (Integrated Lens, Short-distance Small-spot) \| Mounting: Cylindrical 3 dia. \| Spot Diameter: 0.1 dia. \| Center Distance: 5 mm \| Bending Radius: R25 \| IP Rating: IP50 \| Cable Length: 1 m (No Cutting) \| Note: No external lens unit required; lens built-in
E32-L15 2M	Integrated lens long-distance small-spot, 6 dia. spot at 50 mm, IP50	OMRON	Model: E32-L15 2M \| Type: Reflective (Integrated Lens, Long-distance Small-spot) \| Sensing Surface: Two, 9 dia. lenses \| Spot Diameter: 6 dia. \| Center Distance: 50 mm \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Note: No external lens unit required; high-power integrated optics
E32-C21N 2M	Hex-shaped M3 coaxial reflective, aperture 60°, flexible R2, IP67	OMRON	Model: E32-C21N 2M \| Type: Reflective (Coaxial, Hex-shaped) \| Mounting: Hex-shaped M3 \| Aperture Angle: Approx. 60° \| Bending Radius: Flexible R2 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 130 mm \| Sensing Dist. FA ST: 190 mm \| Compatible Lens Unit: E39-F3A-5 / E39-F3B / E39-F3C (parallel-light 4 dia., dist 0~20 mm)
E32-D21N 2M	Hex-shaped M4 reflective, aperture 60°, flexible R1, IP67	OMRON	Model: E32-D21N 2M \| Type: Reflective (Standard, Hex-shaped) \| Mounting: Hex-shaped M4 \| Aperture Angle: Approx. 60° \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 350 mm \| Sensing Dist. FA ST: 520 mm

[OMRON] — E32 Special Application Fiber Units (Liquid-level, Vacuum, FPD/Semiconductor/Solar)

OMRON E32 Series special application fiber units for industrial process environments. Liquid-level detection: E32-A01 (tube-mounting 3.2~9.5 dia., 5 m cable), E32-L25T (8~10 dia. multilevel), E32-D36T (large diameter tubes, IP67), E32-D82F1 (liquid-contact type, heat-resistant 200°C, IP68). Vacuum-resistant: E32-T51V (vacuum side, 120°C, 1 m), E32-T84SV (vacuum side, 200°C, 1 m), E32-T10V (atmospheric pressure side, 70°C, 2 m). FPD/Semiconductor/Solar limited-reflective: E32-A08 (glass substrate alignment, 70°C), E32-A12 (long-distance glass alignment), E32-A09 (glass substrate mapping). Wafer mapping (narrow view): E32-A03-2 (1.5°, -40~+85°C special), E32-A04-1 / E32-A04-8 (3.4° variants). PDF ref: E32 full catalog, Liquid-level / Vacuum / FPD sections.

Brand: Omron Category: Fiber Optic 13 models

Product Code	Description	Brand	Spec
E32-A01 5M	Liquid-level tube-mounting 3.2~9.5 dia., bend-resistant R4, IP50, 5m cable	OMRON	Model: E32-A01 5M \| Type: Liquid-level Detection (Tube-mounting) \| Applicable Tube Dia.: 3.2, 6.4, or 9.5 dia. transparent tube (wall thickness ~1 mm) \| Bending Radius: Bend-resistant R4 \| IP Rating: IP50 \| Cable Length: 5 m (Free Cutting) \| Note: Resistant to bubbles and droplets; residual quantity detection
E32-L25T 2M	Liquid-level tube-mounting 8~10 dia. multilevel, R10, IP50	OMRON	Model: E32-L25T 2M \| Type: Liquid-level Detection (Tube-mounting, Multilevel) \| Applicable Tube Dia.: 8 to 10 dia. transparent tube (wall thickness ~1 mm) \| Bending Radius: R10 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Note: Ideal for multi-level mounting
E32-D36T 2M	Liquid-level no tube diameter restriction, flexible R4, IP67	OMRON	Model: E32-D36T 2M \| Type: Liquid-level Detection (Universal) \| Applicable Tube Dia.: No restrictions on diameter (transparent tube) \| Bending Radius: R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Note: Resistant to bubbles and droplets; usable on large diameter tubes
E32-D82F1 4M	Liquid-contact heat-resistant 200°C, IP68, sensing section R40 / fiber R25, 4m cable	OMRON	Model: E32-D82F1 4M \| Type: Liquid-level Detection (Liquid-contact, Heat-resistant) \| Heat Resistance: 200°C \| IP Rating: IP68 \| Bending Radius: Sensing section R40 / Fiber R25 \| Cable Length: 4 m (Free Cutting) \| Note: Liquid-contact type; adjust received light via amplifier instruction sheet
E32-T51V 1M	Vacuum-resistant 120°C through-beam vacuum side, 1.2 dia., R30, 1m cable	OMRON	Model: E32-T51V 1M \| Type: Through-beam Vacuum-resistant (Vacuum Side) \| Heat Resistance: 120°C \| Optical Axis Dia.: 1.2 dia. \| Bending Radius: R30 \| Cable Length: 1 m \| Sensing Dist. ZV ST: 400 mm \| Sensing Dist. FA ST: 600 mm \| Min. Sensing Object: 10 μm dia. / 4 μm dia. \| Note: For use in vacuum chambers; pair with E32-T10V on atmospheric side
E32-T84SV 1M	Vacuum-resistant 200°C through-beam vacuum side, 2 dia., R25, 1m cable	OMRON	Model: E32-T84SV 1M \| Type: Through-beam Vacuum-resistant (Vacuum Side) \| Heat Resistance: 200°C \| Optical Axis Dia.: 2 dia. \| Bending Radius: R25 \| Cable Length: 1 m \| Sensing Dist. ZV ST: 950 mm \| Sensing Dist. FA ST: 1,420 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-T10V 2M	Vacuum-resistant through-beam atmospheric pressure side, 70°C, 2m cable	OMRON	Model: E32-T10V 2M \| Type: Through-beam Vacuum-resistant (Atmospheric Pressure Side) \| Heat Resistance: 70°C \| Cable Length: 2 m \| Note: Atmospheric pressure side unit; pair with E32-T51V or E32-T84SV in vacuum
E32-A08 2M	FPD glass substrate alignment limited-reflective, 10~20 mm range, 70°C, R25, IP40	OMRON	Model: E32-A08 2M \| Type: Limited-reflective (Glass Substrate Alignment) \| Ambient Temperature: 70°C max. \| Bending Radius: R25 \| IP Rating: IP40 \| Cable Length: 2 m (Free Cutting) \| Sensing Range: 10 to 20 mm \| Standard Sensing Object: Soda glass with reflection factor of 7% \| Note: If background interference occurs, perform power tuning
E32-A12 2M	FPD glass substrate alignment long-distance, 12~30 mm range, 70°C, R25, IP40	OMRON	Model: E32-A12 2M \| Type: Limited-reflective (Glass Substrate Alignment, Long Distance) \| Ambient Temperature: 70°C max. \| Bending Radius: R25 \| IP Rating: IP40 \| Cable Length: 2 m (Free Cutting) \| Sensing Range: 12 to 30 mm \| Standard Sensing Object: Soda glass with reflection factor of 7%
E32-A09 2M	FPD glass substrate mapping, 15~38 mm range (center 25 mm), 70°C, R25, IP40	OMRON	Model: E32-A09 2M \| Type: Limited-reflective (Glass Substrate Mapping) \| Ambient Temperature: 70°C max. \| Bending Radius: R25 \| IP Rating: IP40 \| Cable Length: 2 m (Free Cutting) \| Sensing Range: 15 to 38 mm (center 25 mm) \| Standard Sensing Object: End surface of soda glass t=0.7 mm, rounded edges
E32-A03-2 2M	Wafer mapping 1.5° narrow view through-beam, special temp range, R10, IP50	OMRON	Model: E32-A03-2 2M \| Type: Through-beam Narrow View (Wafer Mapping) \| Aperture Angle: 1.5° \| Bending Radius: R10 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,400 mm \| Sensing Dist. FA ST: 1,400 mm \| Note: Special temperature range variant for wafer mapping applications
E32-A04-1 2M	Wafer mapping 3.4° narrow view through-beam, 1.2 dia., R10, IP50	OMRON	Model: E32-A04-1 2M \| Type: Through-beam Narrow View (Wafer Mapping) \| Aperture Angle: 3.4° \| Profile Thickness: 2 mm \| Optical Axis Dia.: 1.2 dia. \| Bending Radius: R10 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 680 mm \| Sensing Dist. FA ST: 1,020 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia.
E32-A04-8 2M	Wafer mapping 3.4° narrow view through-beam reduced power, R10, IP50	OMRON	Model: E32-A04-8 2M \| Type: Through-beam Narrow View (Wafer Mapping, Reduced Power) \| Aperture Angle: 3.4° \| Bending Radius: R10 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 510 mm \| Sensing Dist. FA ST: 760 mm \| Note: Reduced incident power variant for sensitive workpiece applications

[OMRON] — E32 Standard Reflective Fiber Units (Threaded / Cylindrical / Hex-shaped, Coaxial & Standard)

OMRON E32 Series standard reflective fiber units for threaded and cylindrical mounting. Includes coaxial reflective types (E32-C31N/C91N/C31/C31M/CC200/LD11N) for improved detection of small and glossy objects, and standard reflective types in M3/M4/M6 threaded and 1.5 dia./3 dia./6 dia. cylindrical configurations. IP67 rated. Flexible or bend-resistant fiber options. Compatible with E3X-ZV, E3X-HD, and E3NX-FA fiber amplifiers. Cable length: 1 m or 2 m (free cutting). PDF ref: E418-E1 p.8-11, p.14-15.

Brand: Omron Category: Fiber Optic 16 models

Product Code	Description	Brand	Spec
E32-C31N 2M	Threaded M3 right-angle coaxial reflective, flexible R4, IP67	OMRON	Model: E32-C31N 2M \| Type: Reflective (Coaxial) \| Mounting: Threaded M3 \| View: Right-angle \| Aperture Angle: Approx. 60° \| Bending Radius: Flexible R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 50 mm \| Sensing Dist. FA ST: 75 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-C91N 2M	Threaded M6 right-angle coaxial reflective, flexible R4, IP67	OMRON	Model: E32-C91N 2M \| Type: Reflective (Coaxial) \| Mounting: Threaded M6 \| View: Right-angle \| Aperture Angle: Approx. 60° \| Bending Radius: Flexible R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 350 mm \| Sensing Dist. FA ST: 520 mm \| Min. Sensing Object: — (standard fiber)
E32-D21R 2M	Threaded M3 right-angle reflective, flexible R1, IP67	OMRON	Model: E32-D21R 2M \| Type: Reflective (Standard) \| Mounting: Threaded M3 \| View: Right-angle \| Aperture Angle: Approx. 60° \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 60 mm \| Sensing Dist. FA ST: 90 mm \| Min. Sensing Object: — (standard fiber)
E32-C31 2M	Threaded M3 top-view coaxial reflective, R25, IP67	OMRON	Model: E32-C31 2M \| Type: Reflective (Coaxial) \| Mounting: Threaded M3 \| View: Top-view \| Aperture Angle: Approx. 60° \| Bending Radius: R25 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 150 mm \| Sensing Dist. FA ST: 220 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-C31M 1M	Threaded M3 top-view coaxial reflective, R10, IP67, 1m cable	OMRON	Model: E32-C31M 1M \| Type: Reflective (Coaxial) \| Mounting: Threaded M3 \| View: Top-view \| Aperture Angle: Approx. 60° \| Bending Radius: R10 \| IP Rating: IP67 \| Cable Length: 1 m (Free Cutting) \| Sensing Dist. ZV ST: 60 mm \| Sensing Dist. FA ST: 90 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-D211R 2M	Threaded M4 right-angle reflective, flexible R1, IP67	OMRON	Model: E32-D211R 2M \| Type: Reflective (Standard) \| Mounting: Threaded M4 \| View: Right-angle \| Aperture Angle: Approx. 60° \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 350 mm \| Sensing Dist. FA ST: 520 mm \| Min. Sensing Object: — (standard fiber)
E32-D11R 2M	Threaded M6 right-angle reflective, flexible R1, IP67	OMRON	Model: E32-D11R 2M \| Type: Reflective (Standard) \| Mounting: Threaded M6 \| View: Right-angle \| Aperture Angle: Approx. 60° \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 350 mm \| Sensing Dist. FA ST: 520 mm \| Min. Sensing Object: — (standard fiber)
E32-CC200 2M	Threaded M6 top-view coaxial reflective, R25, IP67	OMRON	Model: E32-CC200 2M \| Type: Reflective (Coaxial) \| Mounting: Threaded M6 \| View: Top-view \| Aperture Angle: Approx. 60° \| Bending Radius: R25 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 600 mm \| Sensing Dist. FA ST: 900 mm \| Min. Sensing Object: — (standard fiber)
E32-LD11N 2M	Hex-shaped M6 top-view Build-in Lens reflective, R25, IP50	OMRON	Model: E32-LD11N 2M \| Type: Reflective (Build-in Lens, Coaxial) \| Mounting: Hex-shaped M6 \| View: Top-view \| Aperture Angle: Approx. 15° \| Bending Radius: R25 \| IP Rating: IP50 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 350 mm \| Sensing Dist. FA ST: 520 mm \| Min. Sensing Object: 0.1 dia. / 0.03 dia. \| Note: GIGA Beam Build-in Lens; for glossy white paper
E32-D22B 2M	Cylindrical 1.5 dia. reflective, bend-resistant R4, IP67	OMRON	Model: E32-D22B 2M \| Type: Reflective (Standard) \| Mounting: Cylindrical press-fit 1.5 dia. \| View: Top-view \| Bending Radius: Bend-resistant R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 60 mm \| Sensing Dist. FA ST: 90 mm \| Min. Sensing Object: — (standard fiber)
E32-D43M 1M	Cylindrical 1.5 dia. sleeve reflective, R4, IP67, 1m cable	OMRON	Model: E32-D43M 1M \| Type: Reflective (Sleeve) \| Mounting: Cylindrical press-fit 1.5 dia. \| View: Top-view \| Bending Radius: R4 \| IP Rating: IP67 \| Cable Length: 1 m (Free Cutting) \| Sensing Dist. ZV ST: 12 mm \| Sensing Dist. FA ST: 18 mm \| Min. Sensing Object: — (standard fiber)
E32-D22R 2M	Cylindrical 3 dia. reflective, flexible R1, IP67	OMRON	Model: E32-D22R 2M \| Type: Reflective (Standard) \| Mounting: Cylindrical press-fit 3 dia. \| View: Top-view \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 60 mm \| Sensing Dist. FA ST: 90 mm \| Min. Sensing Object: — (standard fiber)
E32-D221B 2M	Cylindrical 3 dia. top-view reflective, bend-resistant R4, IP67	OMRON	Model: E32-D221B 2M \| Type: Reflective (Standard) \| Mounting: Cylindrical press-fit 3 dia. \| View: Top-view \| Bending Radius: Bend-resistant R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 140 mm \| Sensing Dist. FA ST: 210 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-D32L 2M	Cylindrical 3 dia. coaxial reflective, R25, IP67	OMRON	Model: E32-D32L 2M \| Type: Reflective (Coaxial) \| Mounting: Cylindrical press-fit 3 dia. \| View: Top-view \| Bending Radius: R25 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 300 mm \| Sensing Dist. FA ST: 450 mm \| Min. Sensing Object: — (standard fiber)
E32-D33 2M	Cylindrical 3 dia. sleeve reflective, R4, IP67	OMRON	Model: E32-D33 2M \| Type: Reflective (Sleeve) \| Mounting: Cylindrical press-fit 3 dia. \| View: Top-view \| Bending Radius: R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 30 mm \| Sensing Dist. FA ST: 45 mm \| Min. Sensing Object: — (standard fiber)
E32-D14LR 2M	Cylindrical 6 dia. side-view reflective, flexible R1, IP67	OMRON	Model: E32-D14LR 2M \| Type: Reflective (Standard) \| Mounting: Cylindrical press-fit 6 dia. \| View: Side-view \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 100 mm \| Sensing Dist. FA ST: 150 mm \| Min. Sensing Object: — (standard fiber)

[OMRON] — E32 Standard Through-beam Fiber Units (Threaded / Cylindrical, M3~M4)

OMRON E32 Series standard through-beam fiber units for threaded and cylindrical mounting. Includes M4 threaded top-view and right-angle models (E32-T11N/T11R) and cylindrical press-fit models in 1 dia. / 1.5 dia. / 3 dia. sizes. IP67 rated. Flexible fiber with small bending radius for tight routing. Compatible with E3X-ZV, E3X-HD, and E3NX-FA fiber amplifiers. Sold as matched pairs (set of 2). Cable length: 2 m (free cutting). PDF ref: E418-E1 p.6-7, p.12-13.

Brand: Omron Category: Fiber Optic 6 models

Product Code	Description	Brand	Spec
E32-T11N 2M	Threaded M4 top-view through-beam, 1 dia., flexible R1, IP67	OMRON	Model: E32-T11N 2M \| Type: Through-beam (Set of 2) \| Mounting: Threaded M4 \| View: Top-view \| Aperture Angle: Approx. 60° \| Sensing Surface Dia.: 1 dia. \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,000 mm \| Sensing Dist. FA ST: 1,500 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-T11R 2M	Threaded M4 right-angle through-beam, 1 dia., flexible R1, IP67	OMRON	Model: E32-T11R 2M \| Type: Through-beam (Set of 2) \| Mounting: Threaded M4 \| View: Right-angle \| Aperture Angle: Approx. 60° \| Sensing Surface Dia.: 1 dia. \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,000 mm \| Sensing Dist. FA ST: 1,500 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-T223R 2M	Cylindrical 1 dia. top-view through-beam, flexible R1, IP67	OMRON	Model: E32-T223R 2M \| Type: Through-beam (Set of 2) \| Mounting: Cylindrical press-fit 1 dia. \| View: Top-view \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 250 mm \| Sensing Dist. FA ST: 370 mm \| Min. Sensing Object: 0.5 dia.
E32-T22B 2M	Cylindrical 1.5 dia. top-view through-beam, bend-resistant R4, IP67	OMRON	Model: E32-T22B 2M \| Type: Through-beam (Set of 2) \| Mounting: Cylindrical press-fit 1.5 dia. \| View: Top-view \| Bending Radius: Bend-resistant R4 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 400 mm \| Sensing Dist. FA ST: 600 mm \| Min. Sensing Object: — (standard fiber)
E32-T12R 2M	Cylindrical 3 dia. top-view through-beam, flexible R1, IP67	OMRON	Model: E32-T12R 2M \| Type: Through-beam (Set of 2) \| Mounting: Cylindrical press-fit 3 dia. \| View: Top-view \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 1,000 mm \| Sensing Dist. FA ST: 1,500 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.
E32-T14LR 2M	Cylindrical 3 dia. side-view through-beam, flexible R1, IP67	OMRON	Model: E32-T14LR 2M \| Type: Through-beam (Set of 2) \| Mounting: Cylindrical press-fit 3 dia. \| View: Side-view \| Bending Radius: Flexible R1 \| IP Rating: IP67 \| Cable Length: 2 m (Free Cutting) \| Sensing Dist. ZV ST: 450 mm \| Sensing Dist. FA ST: 670 mm \| Min. Sensing Object: 5 μm dia. / 2 μm dia.