🔍 Can't find your part? We source far beyond this catalog — list any MRO part, even if it's not listed here, and we'll quote it direct from Korean makers.

Motion Devices

26 products motion-devices ✕

[AUTONICS] AHK Series Hollow Shaft Type 5-Phase Stepper Motor

Hollow shaft type 5-phase stepper motors. Hollow rotor allows cables, tubes, or shafts to pass through center. Frame sizes □ 42/60/85 mm. For applications requiring centered cable routing or pneumatic line passage.

Brand: Autonics Category: 5-Phase Stepper Motor 3 models

Product Code	Brand	Spec
AUTONICS-AHK-42	AUTONICS	Stepper motor \| AHK Series \| Hollow shaft 5-phase \| □ 42 mm 0.72 deg/step \| hollow rotor \| DC \| Cable \| IP54 \| hollow shaft for cable/tubing
AUTONICS-AHK-60	AUTONICS	Stepper motor \| AHK Series \| Hollow shaft 5-phase \| □ 60 mm 0.72 deg/step \| hollow rotor \| DC \| Cable \| IP54 \| hollow shaft for cable/tubing
AUTONICS-AHK-85	AUTONICS	Stepper motor \| AHK Series \| Hollow shaft 5-phase \| □ 85 mm 0.72 deg/step \| hollow rotor \| DC \| Cable \| IP54 \| hollow shaft for cable/tubing

[AUTONICS] Ai-M Series Standard Type 2-Phase Closed-Loop Stepper Motor

Standard type 2-phase closed-loop stepper motors with built-in encoder. Various frame sizes from Ø 20 mm to □ 60 mm. 1.8°/step basic step angle. For use with AiS/AiC drivers. IP54 rated.

Brand: Autonics Category: Closed-Loop Stepper Motor 17 models

Standard type 2-phase closed-loop stepper motors with built-in encoder. Various frame sizes from Ø 20 mm to □ 60 mm. 1.8°/step basic step angle. For use with AiS/AiC drivers. IP54 rated.

Product Code	Brand	Spec
AUTONICS-Ai-M-20MA	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| Ø 20 mm 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-20LA	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| Ø 20 mm long 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-28SB	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| Ø 28 mm S 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-28MB	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| Ø 28 mm M 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-28LB	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| Ø 28 mm L 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-35SB	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| Ø 35 mm S 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-35MB	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| Ø 35 mm M 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-35LB	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| Ø 35 mm L 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-42SA	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| □ 42 mm S 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-42MA	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| □ 42 mm M 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-42LA	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| □ 42 mm L 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-56SA	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| □ 56 mm S 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-56MA	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| □ 56 mm M 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-56LA	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| □ 56 mm L 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-60SA	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| □ 60 mm S 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-60MA	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| □ 60 mm M 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers
AUTONICS-Ai-M-60LA	AUTONICS	Closed-loop stepper motor \| Ai-M Series \| Standard 2-phase closed-loop \| □ 60 mm L 1.8 deg/step \| encoder feedback built-in \| DC \| Cable \| IP54 \| with built-in encoder for AiS/AiC drivers

[AUTONICS] Ai-M-B Series Built-In Brake Type 2-Phase Closed-Loop Stepper Motor

Built-in brake type 2-phase closed-loop stepper motors. Electromagnetic brake holds load when power is removed. For vertical loads requiring position retention without power. □ 42/56/60 mm frame sizes.

Brand: Autonics Category: Closed-Loop Stepper Motor 9 models

Product Code	Brand	Spec
AUTONICS-Ai-M-B-42SA	AUTONICS	Closed-loop stepper motor \| Ai-M-B Series \| 2-phase brake type \| 42SA \| encoder + electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped for vertical loads
AUTONICS-Ai-M-B-42MA	AUTONICS	Closed-loop stepper motor \| Ai-M-B Series \| 2-phase brake type \| 42MA \| encoder + electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped for vertical loads
AUTONICS-Ai-M-B-42LA	AUTONICS	Closed-loop stepper motor \| Ai-M-B Series \| 2-phase brake type \| 42LA \| encoder + electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped for vertical loads
AUTONICS-Ai-M-B-56SA	AUTONICS	Closed-loop stepper motor \| Ai-M-B Series \| 2-phase brake type \| 56SA \| encoder + electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped for vertical loads
AUTONICS-Ai-M-B-56MA	AUTONICS	Closed-loop stepper motor \| Ai-M-B Series \| 2-phase brake type \| 56MA \| encoder + electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped for vertical loads
AUTONICS-Ai-M-B-56LA	AUTONICS	Closed-loop stepper motor \| Ai-M-B Series \| 2-phase brake type \| 56LA \| encoder + electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped for vertical loads
AUTONICS-Ai-M-B-60SA	AUTONICS	Closed-loop stepper motor \| Ai-M-B Series \| 2-phase brake type \| 60SA \| encoder + electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped for vertical loads
AUTONICS-Ai-M-B-60MA	AUTONICS	Closed-loop stepper motor \| Ai-M-B Series \| 2-phase brake type \| 60MA \| encoder + electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped for vertical loads
AUTONICS-Ai-M-B-60LA	AUTONICS	Closed-loop stepper motor \| Ai-M-B Series \| 2-phase brake type \| 60LA \| encoder + electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped for vertical loads

[AUTONICS] Ai-M-G Series Built-In Gear Type 2-Phase Closed-Loop Stepper Motor

Built-in gearbox 2-phase closed-loop stepper motors. Gear ratios G5/7/10/25/50/100 for high-torque low-speed applications. Multiple frame sizes.

Brand: Autonics Category: Closed-Loop Stepper Motor 36 models

Built-in gearbox 2-phase closed-loop stepper motors. Gear ratios G5/7/10/25/50/100 for high-torque low-speed applications. Multiple frame sizes.

Product Code	Brand	Spec
AUTONICS-Ai-M-42MA-G5	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G5 ratio \| 42MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-42MA-G7	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G7 ratio \| 42MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-42MA-G10	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G10 ratio \| 42MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-42MA-G25	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G25 ratio \| 42MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-42MA-G50	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G50 ratio \| 42MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-42MA-G100	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G100 ratio \| 42MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-42LA-G5	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G5 ratio \| 42LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-42LA-G7	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G7 ratio \| 42LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-42LA-G10	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G10 ratio \| 42LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-42LA-G25	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G25 ratio \| 42LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-42LA-G50	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G50 ratio \| 42LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-42LA-G100	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G100 ratio \| 42LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-56MA-G5	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G5 ratio \| 56MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-56MA-G7	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G7 ratio \| 56MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-56MA-G10	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G10 ratio \| 56MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-56MA-G25	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G25 ratio \| 56MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-56MA-G50	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G50 ratio \| 56MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-56MA-G100	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G100 ratio \| 56MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-56LA-G5	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G5 ratio \| 56LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-56LA-G7	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G7 ratio \| 56LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-56LA-G10	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G10 ratio \| 56LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-56LA-G25	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G25 ratio \| 56LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-56LA-G50	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G50 ratio \| 56LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-56LA-G100	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G100 ratio \| 56LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-60MA-G5	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G5 ratio \| 60MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-60MA-G7	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G7 ratio \| 60MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-60MA-G10	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G10 ratio \| 60MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-60MA-G25	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G25 ratio \| 60MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-60MA-G50	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G50 ratio \| 60MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-60MA-G100	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G100 ratio \| 60MA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-60LA-G5	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G5 ratio \| 60LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-60LA-G7	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G7 ratio \| 60LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-60LA-G10	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G10 ratio \| 60LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-60LA-G25	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G25 ratio \| 60LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-60LA-G50	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G50 ratio \| 60LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in
AUTONICS-Ai-M-60LA-G100	AUTONICS	Closed-loop stepper motor \| Ai-M-G Series \| Geared 2-phase G100 ratio \| 60LA \| encoder feedback \| DC \| Cable \| IP54 \| gearbox built-in

[AUTONICS] Ai-M-R Series Built-In Rotary Actuator Type 2-Phase Closed-Loop Stepper Motor

Built-in rotary actuator type 2-phase closed-loop stepper motors. Provides rotational position output through harmonic drive type reducer. Compact integrated rotary actuator solution.

Brand: Autonics Category: Closed-Loop Stepper Motor 6 models

Built-in rotary actuator type 2-phase closed-loop stepper motors. Provides rotational position output through harmonic drive type reducer. Compact integrated rotary actuator solution.

Product Code	Brand	Spec
AUTONICS-Ai-M-42MA-R5	AUTONICS	Closed-loop stepper motor \| Ai-M-R Series \| Rotary actuator 2-phase \| 42MA 5:1 ratio \| encoder feedback \| DC \| Cable \| IP54 \| rotary actuator built-in
AUTONICS-Ai-M-42MA-R10	AUTONICS	Closed-loop stepper motor \| Ai-M-R Series \| Rotary actuator 2-phase \| 42MA 10:1 ratio \| encoder feedback \| DC \| Cable \| IP54 \| rotary actuator built-in
AUTONICS-Ai-M-56MA-R5	AUTONICS	Closed-loop stepper motor \| Ai-M-R Series \| Rotary actuator 2-phase \| 56MA 5:1 ratio \| encoder feedback \| DC \| Cable \| IP54 \| rotary actuator built-in
AUTONICS-Ai-M-56MA-R10	AUTONICS	Closed-loop stepper motor \| Ai-M-R Series \| Rotary actuator 2-phase \| 56MA 10:1 ratio \| encoder feedback \| DC \| Cable \| IP54 \| rotary actuator built-in
AUTONICS-Ai-M-60MA-R5	AUTONICS	Closed-loop stepper motor \| Ai-M-R Series \| Rotary actuator 2-phase \| 60MA 5:1 ratio \| encoder feedback \| DC \| Cable \| IP54 \| rotary actuator built-in
AUTONICS-Ai-M-60MA-R10	AUTONICS	Closed-loop stepper motor \| Ai-M-R Series \| Rotary actuator 2-phase \| 60MA 10:1 ratio \| encoder feedback \| DC \| Cable \| IP54 \| rotary actuator built-in

[AUTONICS] AiA-M Series Standard Type AC Power Input 2-Phase Closed-Loop Stepper Motor

AC compatible 2-phase closed-loop stepper motors. Built-in encoder for closed-loop control. Higher torque ratings than DC motors. For use with AiSA/AiCA drivers. □ 56/60/85 mm frames.

Brand: Autonics Category: Closed-Loop Stepper Motor 9 models

AC compatible 2-phase closed-loop stepper motors. Built-in encoder for closed-loop control. Higher torque ratings than DC motors. For use with AiSA/AiCA drivers. □ 56/60/85 mm frames.

Product Code	Brand	Spec
AUTONICS-AiA-M-56SA	AUTONICS	Closed-loop stepper motor \| AiA-M Series \| Standard AC closed-loop \| □ 56 mm \| encoder feedback \| AC compatible \| Cable \| IP54 \| for AiSA/AiCA drivers
AUTONICS-AiA-M-56MA	AUTONICS	Closed-loop stepper motor \| AiA-M Series \| Standard AC closed-loop \| □ 56 mm \| encoder feedback \| AC compatible \| Cable \| IP54 \| for AiSA/AiCA drivers
AUTONICS-AiA-M-56LA	AUTONICS	Closed-loop stepper motor \| AiA-M Series \| Standard AC closed-loop \| □ 56 mm \| encoder feedback \| AC compatible \| Cable \| IP54 \| for AiSA/AiCA drivers
AUTONICS-AiA-M-60SA	AUTONICS	Closed-loop stepper motor \| AiA-M Series \| Standard AC closed-loop \| □ 60 mm \| encoder feedback \| AC compatible \| Cable \| IP54 \| for AiSA/AiCA drivers
AUTONICS-AiA-M-60MA	AUTONICS	Closed-loop stepper motor \| AiA-M Series \| Standard AC closed-loop \| □ 60 mm \| encoder feedback \| AC compatible \| Cable \| IP54 \| for AiSA/AiCA drivers
AUTONICS-AiA-M-60LA	AUTONICS	Closed-loop stepper motor \| AiA-M Series \| Standard AC closed-loop \| □ 60 mm \| encoder feedback \| AC compatible \| Cable \| IP54 \| for AiSA/AiCA drivers
AUTONICS-AiA-M-85SA	AUTONICS	Closed-loop stepper motor \| AiA-M Series \| Standard AC closed-loop \| □ 85 mm \| encoder feedback \| AC compatible \| Cable \| IP54 \| for AiSA/AiCA drivers
AUTONICS-AiA-M-85MA	AUTONICS	Closed-loop stepper motor \| AiA-M Series \| Standard AC closed-loop \| □ 85 mm \| encoder feedback \| AC compatible \| Cable \| IP54 \| for AiSA/AiCA drivers
AUTONICS-AiA-M-85LA	AUTONICS	Closed-loop stepper motor \| AiA-M Series \| Standard AC closed-loop \| □ 85 mm \| encoder feedback \| AC compatible \| Cable \| IP54 \| for AiSA/AiCA drivers

[AUTONICS] AiA-M-B Series Built-In Brake Type AC Power Input 2-Phase Closed-Loop Stepper Motor

Built-in brake AC powered 2-phase closed-loop stepper motors. Combines AC power compatibility with electromagnetic brake. □ 56/60/85 mm frames.

Brand: Autonics Category: Closed-Loop Stepper Motor 9 models

Built-in brake AC powered 2-phase closed-loop stepper motors. Combines AC power compatibility with electromagnetic brake. □ 56/60/85 mm frames.

Product Code	Brand	Spec
AUTONICS-AiA-M-B-56SA	AUTONICS	Closed-loop stepper motor \| AiA-M-B Series \| AC brake type \| □ 56 mm \| encoder + electromagnetic brake \| AC compatible \| Cable \| IP54 \| brake AC for vertical loads
AUTONICS-AiA-M-B-56MA	AUTONICS	Closed-loop stepper motor \| AiA-M-B Series \| AC brake type \| □ 56 mm \| encoder + electromagnetic brake \| AC compatible \| Cable \| IP54 \| brake AC for vertical loads
AUTONICS-AiA-M-B-56LA	AUTONICS	Closed-loop stepper motor \| AiA-M-B Series \| AC brake type \| □ 56 mm \| encoder + electromagnetic brake \| AC compatible \| Cable \| IP54 \| brake AC for vertical loads
AUTONICS-AiA-M-B-60SA	AUTONICS	Closed-loop stepper motor \| AiA-M-B Series \| AC brake type \| □ 60 mm \| encoder + electromagnetic brake \| AC compatible \| Cable \| IP54 \| brake AC for vertical loads
AUTONICS-AiA-M-B-60MA	AUTONICS	Closed-loop stepper motor \| AiA-M-B Series \| AC brake type \| □ 60 mm \| encoder + electromagnetic brake \| AC compatible \| Cable \| IP54 \| brake AC for vertical loads
AUTONICS-AiA-M-B-60LA	AUTONICS	Closed-loop stepper motor \| AiA-M-B Series \| AC brake type \| □ 60 mm \| encoder + electromagnetic brake \| AC compatible \| Cable \| IP54 \| brake AC for vertical loads
AUTONICS-AiA-M-B-85SA	AUTONICS	Closed-loop stepper motor \| AiA-M-B Series \| AC brake type \| □ 85 mm \| encoder + electromagnetic brake \| AC compatible \| Cable \| IP54 \| brake AC for vertical loads
AUTONICS-AiA-M-B-85MA	AUTONICS	Closed-loop stepper motor \| AiA-M-B Series \| AC brake type \| □ 85 mm \| encoder + electromagnetic brake \| AC compatible \| Cable \| IP54 \| brake AC for vertical loads
AUTONICS-AiA-M-B-85LA	AUTONICS	Closed-loop stepper motor \| AiA-M-B Series \| AC brake type \| □ 85 mm \| encoder + electromagnetic brake \| AC compatible \| Cable \| IP54 \| brake AC for vertical loads

[AUTONICS] AiA-M-G Series Built-In Gear Type AC Power Input 2-Phase Closed-Loop Stepper Motor

Built-in gearbox AC powered 2-phase closed-loop stepper motors. Gear ratios for high-torque applications. AC compatibility for higher overall torque.

Brand: Autonics Category: Closed-Loop Stepper Motor 30 models

Built-in gearbox AC powered 2-phase closed-loop stepper motors. Gear ratios for high-torque applications. AC compatibility for higher overall torque.

Product Code	Brand	Spec
AUTONICS-AiA-M-56MA-G5	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G5 ratio \| □ 56 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-56MA-G10	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G10 ratio \| □ 56 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-56MA-G25	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G25 ratio \| □ 56 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-56MA-G50	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G50 ratio \| □ 56 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-56MA-G100	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G100 ratio \| □ 56 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-56LA-G5	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G5 ratio \| □ 56 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-56LA-G10	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G10 ratio \| □ 56 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-56LA-G25	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G25 ratio \| □ 56 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-56LA-G50	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G50 ratio \| □ 56 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-56LA-G100	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G100 ratio \| □ 56 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-60MA-G5	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G5 ratio \| □ 60 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-60MA-G10	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G10 ratio \| □ 60 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-60MA-G25	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G25 ratio \| □ 60 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-60MA-G50	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G50 ratio \| □ 60 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-60MA-G100	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G100 ratio \| □ 60 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-60LA-G5	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G5 ratio \| □ 60 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-60LA-G10	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G10 ratio \| □ 60 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-60LA-G25	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G25 ratio \| □ 60 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-60LA-G50	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G50 ratio \| □ 60 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-60LA-G100	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G100 ratio \| □ 60 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-85MA-G5	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G5 ratio \| □ 85 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-85MA-G10	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G10 ratio \| □ 85 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-85MA-G25	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G25 ratio \| □ 85 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-85MA-G50	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G50 ratio \| □ 85 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-85MA-G100	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G100 ratio \| □ 85 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-85LA-G5	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G5 ratio \| □ 85 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-85LA-G10	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G10 ratio \| □ 85 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-85LA-G25	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G25 ratio \| □ 85 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-85LA-G50	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G50 ratio \| □ 85 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop
AUTONICS-AiA-M-85LA-G100	AUTONICS	Closed-loop stepper motor \| AiA-M-G Series \| AC geared G100 ratio \| □ 85 mm \| encoder feedback \| AC \| Cable \| IP54 \| AC geared closed-loop

[AUTONICS] AiA-M-R Series Built-In Rotary Actuator Type AC Power Input 2-Phase Closed-Loop Stepper Motor

Built-in rotary actuator AC powered 2-phase closed-loop stepper motors.

Brand: Autonics Category: Closed-Loop Stepper Motor 6 models

Built-in rotary actuator AC powered 2-phase closed-loop stepper motors.

Product Code	Brand	Spec
AUTONICS-AiA-M-56MA-R5	AUTONICS	Closed-loop stepper motor \| AiA-M-R Series \| AC rotary actuator \| □ 56 mm 5:1 \| encoder feedback \| AC \| Cable \| IP54 \| AC rotary actuator
AUTONICS-AiA-M-56MA-R10	AUTONICS	Closed-loop stepper motor \| AiA-M-R Series \| AC rotary actuator \| □ 56 mm 10:1 \| encoder feedback \| AC \| Cable \| IP54 \| AC rotary actuator
AUTONICS-AiA-M-60MA-R5	AUTONICS	Closed-loop stepper motor \| AiA-M-R Series \| AC rotary actuator \| □ 60 mm 5:1 \| encoder feedback \| AC \| Cable \| IP54 \| AC rotary actuator
AUTONICS-AiA-M-60MA-R10	AUTONICS	Closed-loop stepper motor \| AiA-M-R Series \| AC rotary actuator \| □ 60 mm 10:1 \| encoder feedback \| AC \| Cable \| IP54 \| AC rotary actuator
AUTONICS-AiA-M-85MA-R5	AUTONICS	Closed-loop stepper motor \| AiA-M-R Series \| AC rotary actuator \| □ 85 mm 5:1 \| encoder feedback \| AC \| Cable \| IP54 \| AC rotary actuator
AUTONICS-AiA-M-85MA-R10	AUTONICS	Closed-loop stepper motor \| AiA-M-R Series \| AC rotary actuator \| □ 85 mm 10:1 \| encoder feedback \| AC \| Cable \| IP54 \| AC rotary actuator

[AUTONICS] AiC Series 2-Phase Closed-Loop Stepper Motor System with Integrated Controller

DC powered 2-phase closed-loop stepper systems with integrated motion controller. Eliminates need for separate motion controller. Programmable motion sequences. Modbus RTU communication and digital I/O. Same motor frame support as AiS Series.

Brand: Autonics Category: Closed-Loop Stepper System 12 models

Product Code	Brand	Spec
AUTONICS-AiC-D-20A	AUTONICS	Closed-loop stepper driver \| AiC Series \| DC integrated controller \| 20A motor support \| Modbus RTU + I/O \| 24 VDC \| Screw terminal \| IP20 \| with integrated motion controller
AUTONICS-AiC-D-28B	AUTONICS	Closed-loop stepper driver \| AiC Series \| DC integrated controller \| 28B motor support \| Modbus RTU + I/O \| 24 VDC \| Screw terminal \| IP20 \| with integrated motion controller
AUTONICS-AiC-D-35B	AUTONICS	Closed-loop stepper driver \| AiC Series \| DC integrated controller \| 35B motor support \| Modbus RTU + I/O \| 24 VDC \| Screw terminal \| IP20 \| with integrated motion controller
AUTONICS-AiC-D-42SA	AUTONICS	Closed-loop stepper driver \| AiC Series \| DC integrated controller \| 42SA motor support \| Modbus RTU + I/O \| 24 VDC \| Screw terminal \| IP20 \| with integrated motion controller
AUTONICS-AiC-D-42MA	AUTONICS	Closed-loop stepper driver \| AiC Series \| DC integrated controller \| 42MA motor support \| Modbus RTU + I/O \| 24 VDC \| Screw terminal \| IP20 \| with integrated motion controller
AUTONICS-AiC-D-42LA	AUTONICS	Closed-loop stepper driver \| AiC Series \| DC integrated controller \| 42LA motor support \| Modbus RTU + I/O \| 24 VDC \| Screw terminal \| IP20 \| with integrated motion controller
AUTONICS-AiC-D-56SA	AUTONICS	Closed-loop stepper driver \| AiC Series \| DC integrated controller \| 56SA motor support \| Modbus RTU + I/O \| 24 VDC \| Screw terminal \| IP20 \| with integrated motion controller
AUTONICS-AiC-D-56MA	AUTONICS	Closed-loop stepper driver \| AiC Series \| DC integrated controller \| 56MA motor support \| Modbus RTU + I/O \| 24 VDC \| Screw terminal \| IP20 \| with integrated motion controller
AUTONICS-AiC-D-56LA	AUTONICS	Closed-loop stepper driver \| AiC Series \| DC integrated controller \| 56LA motor support \| Modbus RTU + I/O \| 24 VDC \| Screw terminal \| IP20 \| with integrated motion controller
AUTONICS-AiC-D-60SA	AUTONICS	Closed-loop stepper driver \| AiC Series \| DC integrated controller \| 60SA motor support \| Modbus RTU + I/O \| 24 VDC \| Screw terminal \| IP20 \| with integrated motion controller
AUTONICS-AiC-D-60MA	AUTONICS	Closed-loop stepper driver \| AiC Series \| DC integrated controller \| 60MA motor support \| Modbus RTU + I/O \| 24 VDC \| Screw terminal \| IP20 \| with integrated motion controller
AUTONICS-AiC-D-60LA	AUTONICS	Closed-loop stepper driver \| AiC Series \| DC integrated controller \| 60LA motor support \| Modbus RTU + I/O \| 24 VDC \| Screw terminal \| IP20 \| with integrated motion controller

[AUTONICS] AiC-CL Series CC-Link 2-Phase Closed-Loop Stepper Motor System

AiC variant with CC-Link communication. Integrated motion controller with CC-Link slave interface for Mitsubishi PLC integration.

Brand: Autonics Category: Closed-Loop Stepper System 9 models

AiC variant with CC-Link communication. Integrated motion controller with CC-Link slave interface for Mitsubishi PLC integration.

Product Code	Brand	Spec
AUTONICS-AiC-CL-42SA	AUTONICS	Closed-loop stepper driver \| AiC-CL Series \| DC CC-Link \| 42SA motor support \| CC-Link communication \| 24 VDC \| Screw terminal \| IP20 \| CC-Link integrated controller
AUTONICS-AiC-CL-42MA	AUTONICS	Closed-loop stepper driver \| AiC-CL Series \| DC CC-Link \| 42MA motor support \| CC-Link communication \| 24 VDC \| Screw terminal \| IP20 \| CC-Link integrated controller
AUTONICS-AiC-CL-42LA	AUTONICS	Closed-loop stepper driver \| AiC-CL Series \| DC CC-Link \| 42LA motor support \| CC-Link communication \| 24 VDC \| Screw terminal \| IP20 \| CC-Link integrated controller
AUTONICS-AiC-CL-56SA	AUTONICS	Closed-loop stepper driver \| AiC-CL Series \| DC CC-Link \| 56SA motor support \| CC-Link communication \| 24 VDC \| Screw terminal \| IP20 \| CC-Link integrated controller
AUTONICS-AiC-CL-56MA	AUTONICS	Closed-loop stepper driver \| AiC-CL Series \| DC CC-Link \| 56MA motor support \| CC-Link communication \| 24 VDC \| Screw terminal \| IP20 \| CC-Link integrated controller
AUTONICS-AiC-CL-56LA	AUTONICS	Closed-loop stepper driver \| AiC-CL Series \| DC CC-Link \| 56LA motor support \| CC-Link communication \| 24 VDC \| Screw terminal \| IP20 \| CC-Link integrated controller
AUTONICS-AiC-CL-60SA	AUTONICS	Closed-loop stepper driver \| AiC-CL Series \| DC CC-Link \| 60SA motor support \| CC-Link communication \| 24 VDC \| Screw terminal \| IP20 \| CC-Link integrated controller
AUTONICS-AiC-CL-60MA	AUTONICS	Closed-loop stepper driver \| AiC-CL Series \| DC CC-Link \| 60MA motor support \| CC-Link communication \| 24 VDC \| Screw terminal \| IP20 \| CC-Link integrated controller
AUTONICS-AiC-CL-60LA	AUTONICS	Closed-loop stepper driver \| AiC-CL Series \| DC CC-Link \| 60LA motor support \| CC-Link communication \| 24 VDC \| Screw terminal \| IP20 \| CC-Link integrated controller

[AUTONICS] AiC-EC Series EtherCAT 2-Phase Closed-Loop Stepper Motor System

AiC variant with EtherCAT communication. Integrated motion controller with EtherCAT slave for high-speed deterministic motion control networks.

Brand: Autonics Category: Closed-Loop Stepper System 9 models

AiC variant with EtherCAT communication. Integrated motion controller with EtherCAT slave for high-speed deterministic motion control networks.

Product Code	Brand	Spec
AUTONICS-AiC-EC-42SA	AUTONICS	Closed-loop stepper driver \| AiC-EC Series \| DC EtherCAT \| 42SA motor support \| EtherCAT slave \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| EtherCAT integrated controller
AUTONICS-AiC-EC-42MA	AUTONICS	Closed-loop stepper driver \| AiC-EC Series \| DC EtherCAT \| 42MA motor support \| EtherCAT slave \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| EtherCAT integrated controller
AUTONICS-AiC-EC-42LA	AUTONICS	Closed-loop stepper driver \| AiC-EC Series \| DC EtherCAT \| 42LA motor support \| EtherCAT slave \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| EtherCAT integrated controller
AUTONICS-AiC-EC-56SA	AUTONICS	Closed-loop stepper driver \| AiC-EC Series \| DC EtherCAT \| 56SA motor support \| EtherCAT slave \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| EtherCAT integrated controller
AUTONICS-AiC-EC-56MA	AUTONICS	Closed-loop stepper driver \| AiC-EC Series \| DC EtherCAT \| 56MA motor support \| EtherCAT slave \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| EtherCAT integrated controller
AUTONICS-AiC-EC-56LA	AUTONICS	Closed-loop stepper driver \| AiC-EC Series \| DC EtherCAT \| 56LA motor support \| EtherCAT slave \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| EtherCAT integrated controller
AUTONICS-AiC-EC-60SA	AUTONICS	Closed-loop stepper driver \| AiC-EC Series \| DC EtherCAT \| 60SA motor support \| EtherCAT slave \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| EtherCAT integrated controller
AUTONICS-AiC-EC-60MA	AUTONICS	Closed-loop stepper driver \| AiC-EC Series \| DC EtherCAT \| 60MA motor support \| EtherCAT slave \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| EtherCAT integrated controller
AUTONICS-AiC-EC-60LA	AUTONICS	Closed-loop stepper driver \| AiC-EC Series \| DC EtherCAT \| 60LA motor support \| EtherCAT slave \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| EtherCAT integrated controller

[AUTONICS] AiC-MT Series Modbus TCP 2-Phase Closed-Loop Stepper Motor System

AiC variant with Modbus TCP/IP communication. Integrated motion controller with Modbus TCP slave for Ethernet-based control systems.

Brand: Autonics Category: Closed-Loop Stepper System 6 models

AiC variant with Modbus TCP/IP communication. Integrated motion controller with Modbus TCP slave for Ethernet-based control systems.

Product Code	Brand	Spec
AUTONICS-AiC-MT-42SA	AUTONICS	Closed-loop stepper driver \| AiC-MT Series \| DC Modbus TCP \| 42SA motor support \| Modbus TCP/IP \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| Modbus TCP integrated controller
AUTONICS-AiC-MT-42MA	AUTONICS	Closed-loop stepper driver \| AiC-MT Series \| DC Modbus TCP \| 42MA motor support \| Modbus TCP/IP \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| Modbus TCP integrated controller
AUTONICS-AiC-MT-42LA	AUTONICS	Closed-loop stepper driver \| AiC-MT Series \| DC Modbus TCP \| 42LA motor support \| Modbus TCP/IP \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| Modbus TCP integrated controller
AUTONICS-AiC-MT-56SA	AUTONICS	Closed-loop stepper driver \| AiC-MT Series \| DC Modbus TCP \| 56SA motor support \| Modbus TCP/IP \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| Modbus TCP integrated controller
AUTONICS-AiC-MT-56MA	AUTONICS	Closed-loop stepper driver \| AiC-MT Series \| DC Modbus TCP \| 56MA motor support \| Modbus TCP/IP \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| Modbus TCP integrated controller
AUTONICS-AiC-MT-56LA	AUTONICS	Closed-loop stepper driver \| AiC-MT Series \| DC Modbus TCP \| 56LA motor support \| Modbus TCP/IP \| 24 VDC \| RJ45 + Screw terminal \| IP20 \| Modbus TCP integrated controller

[AUTONICS] AiCA Series AC Power 2-Phase Closed-Loop Stepper Motor System with Integrated Controllers

AC powered AiC variant with integrated motion controller. For high-torque applications using AC mains. Modbus RTU communication and digital I/O. Supports □ 56/60/85 mm motors.

Brand: Autonics Category: Closed-Loop Stepper System 9 models

AC powered AiC variant with integrated motion controller. For high-torque applications using AC mains. Modbus RTU communication and digital I/O. Supports □ 56/60/85 mm motors.

Product Code	Brand	Spec
AUTONICS-AiCA-D-56SA	AUTONICS	Closed-loop stepper driver \| AiCA Series \| AC integrated controller \| □ 56 mm motor support \| Modbus RTU + I/O \| 100-240 VAC \| Screw terminal \| IP20 \| AC integrated controller
AUTONICS-AiCA-D-56MA	AUTONICS	Closed-loop stepper driver \| AiCA Series \| AC integrated controller \| □ 56 mm motor support \| Modbus RTU + I/O \| 100-240 VAC \| Screw terminal \| IP20 \| AC integrated controller
AUTONICS-AiCA-D-56LA	AUTONICS	Closed-loop stepper driver \| AiCA Series \| AC integrated controller \| □ 56 mm motor support \| Modbus RTU + I/O \| 100-240 VAC \| Screw terminal \| IP20 \| AC integrated controller
AUTONICS-AiCA-D-60SA	AUTONICS	Closed-loop stepper driver \| AiCA Series \| AC integrated controller \| □ 60 mm motor support \| Modbus RTU + I/O \| 100-240 VAC \| Screw terminal \| IP20 \| AC integrated controller
AUTONICS-AiCA-D-60MA	AUTONICS	Closed-loop stepper driver \| AiCA Series \| AC integrated controller \| □ 60 mm motor support \| Modbus RTU + I/O \| 100-240 VAC \| Screw terminal \| IP20 \| AC integrated controller
AUTONICS-AiCA-D-60LA	AUTONICS	Closed-loop stepper driver \| AiCA Series \| AC integrated controller \| □ 60 mm motor support \| Modbus RTU + I/O \| 100-240 VAC \| Screw terminal \| IP20 \| AC integrated controller
AUTONICS-AiCA-D-85SA	AUTONICS	Closed-loop stepper driver \| AiCA Series \| AC integrated controller \| □ 85 mm motor support \| Modbus RTU + I/O \| 100-240 VAC \| Screw terminal \| IP20 \| AC integrated controller
AUTONICS-AiCA-D-85MA	AUTONICS	Closed-loop stepper driver \| AiCA Series \| AC integrated controller \| □ 85 mm motor support \| Modbus RTU + I/O \| 100-240 VAC \| Screw terminal \| IP20 \| AC integrated controller
AUTONICS-AiCA-D-85LA	AUTONICS	Closed-loop stepper driver \| AiCA Series \| AC integrated controller \| □ 85 mm motor support \| Modbus RTU + I/O \| 100-240 VAC \| Screw terminal \| IP20 \| AC integrated controller

[AUTONICS] AiCA-EC Series AC Power EtherCAT 2-Phase Closed-Loop Stepper Motor System

AC powered AiC variant with EtherCAT communication. High-power closed-loop stepper system with EtherCAT slave interface.

Brand: Autonics Category: Closed-Loop Stepper System 9 models

AC powered AiC variant with EtherCAT communication. High-power closed-loop stepper system with EtherCAT slave interface.

Product Code	Brand	Spec
AUTONICS-AiCA-EC-56SA	AUTONICS	Closed-loop stepper driver \| AiCA-EC Series \| AC EtherCAT \| □ 56 mm motor \| EtherCAT slave \| 100-240 VAC \| RJ45 + Screw terminal \| IP20 \| AC EtherCAT integrated controller
AUTONICS-AiCA-EC-56MA	AUTONICS	Closed-loop stepper driver \| AiCA-EC Series \| AC EtherCAT \| □ 56 mm motor \| EtherCAT slave \| 100-240 VAC \| RJ45 + Screw terminal \| IP20 \| AC EtherCAT integrated controller
AUTONICS-AiCA-EC-56LA	AUTONICS	Closed-loop stepper driver \| AiCA-EC Series \| AC EtherCAT \| □ 56 mm motor \| EtherCAT slave \| 100-240 VAC \| RJ45 + Screw terminal \| IP20 \| AC EtherCAT integrated controller
AUTONICS-AiCA-EC-60SA	AUTONICS	Closed-loop stepper driver \| AiCA-EC Series \| AC EtherCAT \| □ 60 mm motor \| EtherCAT slave \| 100-240 VAC \| RJ45 + Screw terminal \| IP20 \| AC EtherCAT integrated controller
AUTONICS-AiCA-EC-60MA	AUTONICS	Closed-loop stepper driver \| AiCA-EC Series \| AC EtherCAT \| □ 60 mm motor \| EtherCAT slave \| 100-240 VAC \| RJ45 + Screw terminal \| IP20 \| AC EtherCAT integrated controller
AUTONICS-AiCA-EC-60LA	AUTONICS	Closed-loop stepper driver \| AiCA-EC Series \| AC EtherCAT \| □ 60 mm motor \| EtherCAT slave \| 100-240 VAC \| RJ45 + Screw terminal \| IP20 \| AC EtherCAT integrated controller
AUTONICS-AiCA-EC-85SA	AUTONICS	Closed-loop stepper driver \| AiCA-EC Series \| AC EtherCAT \| □ 85 mm motor \| EtherCAT slave \| 100-240 VAC \| RJ45 + Screw terminal \| IP20 \| AC EtherCAT integrated controller
AUTONICS-AiCA-EC-85MA	AUTONICS	Closed-loop stepper driver \| AiCA-EC Series \| AC EtherCAT \| □ 85 mm motor \| EtherCAT slave \| 100-240 VAC \| RJ45 + Screw terminal \| IP20 \| AC EtherCAT integrated controller
AUTONICS-AiCA-EC-85LA	AUTONICS	Closed-loop stepper driver \| AiCA-EC Series \| AC EtherCAT \| □ 85 mm motor \| EtherCAT slave \| 100-240 VAC \| RJ45 + Screw terminal \| IP20 \| AC EtherCAT integrated controller

[AUTONICS] AiS Series 2-Phase Closed-Loop Stepper Motor System

DC powered 2-phase closed-loop stepper motor systems with real-time position control. High speed and high torque drive without missing steps. Built-in encoder feedback for closed-loop control. Easy operation setting with external adjuster (Gain, Speed filter, In-position, Resolution). Supports motor frames Ø 20/28/35 mm and □ 42/56/60 mm. Built-in brake type motors available (AiS-D-B Series). 24 VDC input.

Brand: Autonics Category: Closed-Loop Stepper System 12 models

Product Code	Brand	Spec
AUTONICS-AiS-D-20A	AUTONICS	Closed-loop stepper driver \| AiS Series \| DC closed-loop driver \| Ø 20 mm motor support \| Pulse train + alarm output \| 24 VDC \| Screw terminal \| IP20 \| DC closed-loop driver
AUTONICS-AiS-D-28B	AUTONICS	Closed-loop stepper driver \| AiS Series \| DC closed-loop driver \| Ø 28 mm motor support \| Pulse train + alarm output \| 24 VDC \| Screw terminal \| IP20 \| DC closed-loop driver
AUTONICS-AiS-D-35B	AUTONICS	Closed-loop stepper driver \| AiS Series \| DC closed-loop driver \| Ø 35 mm motor support \| Pulse train + alarm output \| 24 VDC \| Screw terminal \| IP20 \| DC closed-loop driver
AUTONICS-AiS-D-42SA	AUTONICS	Closed-loop stepper driver \| AiS Series \| DC closed-loop driver \| □ 42 mm S length motor support \| Pulse train + alarm output \| 24 VDC \| Screw terminal \| IP20 \| DC closed-loop driver
AUTONICS-AiS-D-42MA	AUTONICS	Closed-loop stepper driver \| AiS Series \| DC closed-loop driver \| □ 42 mm M length motor support \| Pulse train + alarm output \| 24 VDC \| Screw terminal \| IP20 \| DC closed-loop driver
AUTONICS-AiS-D-42LA	AUTONICS	Closed-loop stepper driver \| AiS Series \| DC closed-loop driver \| □ 42 mm L length motor support \| Pulse train + alarm output \| 24 VDC \| Screw terminal \| IP20 \| DC closed-loop driver
AUTONICS-AiS-D-56SA	AUTONICS	Closed-loop stepper driver \| AiS Series \| DC closed-loop driver \| □ 56 mm S length motor support \| Pulse train + alarm output \| 24 VDC \| Screw terminal \| IP20 \| DC closed-loop driver
AUTONICS-AiS-D-56MA	AUTONICS	Closed-loop stepper driver \| AiS Series \| DC closed-loop driver \| □ 56 mm M length motor support \| Pulse train + alarm output \| 24 VDC \| Screw terminal \| IP20 \| DC closed-loop driver
AUTONICS-AiS-D-56LA	AUTONICS	Closed-loop stepper driver \| AiS Series \| DC closed-loop driver \| □ 56 mm L length motor support \| Pulse train + alarm output \| 24 VDC \| Screw terminal \| IP20 \| DC closed-loop driver
AUTONICS-AiS-D-60SA	AUTONICS	Closed-loop stepper driver \| AiS Series \| DC closed-loop driver \| □ 60 mm S length motor support \| Pulse train + alarm output \| 24 VDC \| Screw terminal \| IP20 \| DC closed-loop driver
AUTONICS-AiS-D-60MA	AUTONICS	Closed-loop stepper driver \| AiS Series \| DC closed-loop driver \| □ 60 mm M length motor support \| Pulse train + alarm output \| 24 VDC \| Screw terminal \| IP20 \| DC closed-loop driver
AUTONICS-AiS-D-60LA	AUTONICS	Closed-loop stepper driver \| AiS Series \| DC closed-loop driver \| □ 60 mm L length motor support \| Pulse train + alarm output \| 24 VDC \| Screw terminal \| IP20 \| DC closed-loop driver

[AUTONICS] AiSA Series AC Power Input 2-Phase Closed-Loop Stepper Motor System

AC powered 2-phase closed-loop stepper motor systems for higher torque applications. Direct connection to 100-240 VAC mains eliminates need for separate DC power supply. Same closed-loop control features as AiS Series. Supports motor frames □ 56/60/85 mm.

Brand: Autonics Category: Closed-Loop Stepper System 9 models

Product Code	Brand	Spec
AUTONICS-AiSA-D-56SA	AUTONICS	Closed-loop stepper driver \| AiSA Series \| AC closed-loop driver \| □ 56 mm motor \| Pulse train + alarm output \| 100-240 VAC \| Screw terminal \| IP20 \| AC powered closed-loop
AUTONICS-AiSA-D-56MA	AUTONICS	Closed-loop stepper driver \| AiSA Series \| AC closed-loop driver \| □ 56 mm motor \| Pulse train + alarm output \| 100-240 VAC \| Screw terminal \| IP20 \| AC powered closed-loop
AUTONICS-AiSA-D-56LA	AUTONICS	Closed-loop stepper driver \| AiSA Series \| AC closed-loop driver \| □ 56 mm motor \| Pulse train + alarm output \| 100-240 VAC \| Screw terminal \| IP20 \| AC powered closed-loop
AUTONICS-AiSA-D-60SA	AUTONICS	Closed-loop stepper driver \| AiSA Series \| AC closed-loop driver \| □ 60 mm motor \| Pulse train + alarm output \| 100-240 VAC \| Screw terminal \| IP20 \| AC powered closed-loop
AUTONICS-AiSA-D-60MA	AUTONICS	Closed-loop stepper driver \| AiSA Series \| AC closed-loop driver \| □ 60 mm motor \| Pulse train + alarm output \| 100-240 VAC \| Screw terminal \| IP20 \| AC powered closed-loop
AUTONICS-AiSA-D-60LA	AUTONICS	Closed-loop stepper driver \| AiSA Series \| AC closed-loop driver \| □ 60 mm motor \| Pulse train + alarm output \| 100-240 VAC \| Screw terminal \| IP20 \| AC powered closed-loop
AUTONICS-AiSA-D-85SA	AUTONICS	Closed-loop stepper driver \| AiSA Series \| AC closed-loop driver \| □ 85 mm motor \| Pulse train + alarm output \| 100-240 VAC \| Screw terminal \| IP20 \| AC powered closed-loop
AUTONICS-AiSA-D-85MA	AUTONICS	Closed-loop stepper driver \| AiSA Series \| AC closed-loop driver \| □ 85 mm motor \| Pulse train + alarm output \| 100-240 VAC \| Screw terminal \| IP20 \| AC powered closed-loop
AUTONICS-AiSA-D-85LA	AUTONICS	Closed-loop stepper driver \| AiSA Series \| AC closed-loop driver \| □ 85 mm motor \| Pulse train + alarm output \| 100-240 VAC \| Screw terminal \| IP20 \| AC powered closed-loop

[AUTONICS] AK Series Standard / Built-In Brake Type 5-Phase Stepper Motors

5-phase stepper motors with 0.72°/step basic step angle for smoother and more precise motion than 2-phase. Standard type and built-in brake type variants. Frame sizes □ 28/42/60/85 mm. Compact size ideal for high-precision automation. Built-in brake type AK-B Series for vertical load retention. Brake releases when power applied to brake wire.

Brand: Autonics Category: 5-Phase Stepper Motor 15 models

Product Code	Brand	Spec
AUTONICS-A1K-S543	AUTONICS	Stepper motor \| AK Series \| Standard 5-phase \| □ 28 mm small frame 0.72 deg/step \| unipolar \| DC \| Cable \| IP54 \| standard 5-phase 0.72 deg
AUTONICS-A2K-S544	AUTONICS	Stepper motor \| AK Series \| Standard 5-phase \| □ 28 mm medium frame 0.72 deg/step \| unipolar \| DC \| Cable \| IP54 \| standard 5-phase 0.72 deg
AUTONICS-A3K-S545	AUTONICS	Stepper motor \| AK Series \| Standard 5-phase \| □ 28 mm large frame 0.72 deg/step \| unipolar \| DC \| Cable \| IP54 \| standard 5-phase 0.72 deg
AUTONICS-A4K-S564	AUTONICS	Stepper motor \| AK Series \| Standard 5-phase \| □ 42 mm small frame 0.72 deg/step \| unipolar \| DC \| Cable \| IP54 \| standard 5-phase 0.72 deg
AUTONICS-A8K-S566	AUTONICS	Stepper motor \| AK Series \| Standard 5-phase \| □ 42 mm medium frame 0.72 deg/step \| unipolar \| DC \| Cable \| IP54 \| standard 5-phase 0.72 deg
AUTONICS-A16K-S569	AUTONICS	Stepper motor \| AK Series \| Standard 5-phase \| □ 42 mm large frame 0.72 deg/step \| unipolar \| DC \| Cable \| IP54 \| standard 5-phase 0.72 deg
AUTONICS-A21K-S596	AUTONICS	Stepper motor \| AK Series \| Standard 5-phase \| □ 60 mm small frame 0.72 deg/step \| unipolar \| DC \| Cable \| IP54 \| standard 5-phase 0.72 deg
AUTONICS-A41K-S599	AUTONICS	Stepper motor \| AK Series \| Standard 5-phase \| □ 60 mm medium frame 0.72 deg/step \| unipolar \| DC \| Cable \| IP54 \| standard 5-phase 0.72 deg
AUTONICS-A63K-S5913	AUTONICS	Stepper motor \| AK Series \| Standard 5-phase \| □ 60 mm large frame 0.72 deg/step \| unipolar \| DC \| Cable \| IP54 \| standard 5-phase 0.72 deg
AUTONICS-A4K-S564-B	AUTONICS	Stepper motor \| AK Series \| Brake type 5-phase \| □ 42 mm small frame 0.72 deg/step \| with electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped 5-phase
AUTONICS-A8K-S566-B	AUTONICS	Stepper motor \| AK Series \| Brake type 5-phase \| □ 42 mm medium frame 0.72 deg/step \| with electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped 5-phase
AUTONICS-A16K-S569-B	AUTONICS	Stepper motor \| AK Series \| Brake type 5-phase \| □ 42 mm large frame 0.72 deg/step \| with electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped 5-phase
AUTONICS-A21K-S596-B	AUTONICS	Stepper motor \| AK Series \| Brake type 5-phase \| □ 60 mm small frame 0.72 deg/step \| with electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped 5-phase
AUTONICS-A41K-S599-B	AUTONICS	Stepper motor \| AK Series \| Brake type 5-phase \| □ 60 mm medium frame 0.72 deg/step \| with electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped 5-phase
AUTONICS-A63K-S5913-B	AUTONICS	Stepper motor \| AK Series \| Brake type 5-phase \| □ 60 mm large frame 0.72 deg/step \| with electromagnetic brake \| DC \| Cable \| IP54 \| brake-equipped 5-phase

[AUTONICS] AK-G Series Built-In Gear Type 5-Phase Stepper Motors

Built-in gearbox 5-phase stepper motors. Multiple gear ratios from G5 to G100 for varied torque/speed requirements. Frame sizes □ 42/60/85 mm.

Brand: Autonics Category: 5-Phase Stepper Motor 36 models

Built-in gearbox 5-phase stepper motors. Multiple gear ratios from G5 to G100 for varied torque/speed requirements. Frame sizes □ 42/60/85 mm.

Product Code	Brand	Spec
AUTONICS-A4K-S564-G5	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G5 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A4K-S564-G7	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G7 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A4K-S564-G10	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G10 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A4K-S564-G25	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G25 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A4K-S564-G50	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G50 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A4K-S564-G100	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G100 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A8K-S566-G5	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G5 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A8K-S566-G7	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G7 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A8K-S566-G10	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G10 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A8K-S566-G25	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G25 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A8K-S566-G50	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G50 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A8K-S566-G100	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G100 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A16K-S569-G5	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G5 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A16K-S569-G7	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G7 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A16K-S569-G10	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G10 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A16K-S569-G25	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G25 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A16K-S569-G50	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G50 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A16K-S569-G100	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 56 mm G100 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A21K-S596-G5	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G5 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A21K-S596-G7	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G7 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A21K-S596-G10	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G10 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A21K-S596-G25	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G25 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A21K-S596-G50	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G50 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A21K-S596-G100	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G100 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A41K-S599-G5	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G5 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A41K-S599-G7	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G7 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A41K-S599-G10	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G10 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A41K-S599-G25	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G25 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A41K-S599-G50	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G50 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A41K-S599-G100	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G100 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A63K-S5913-G5	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G5 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A63K-S5913-G7	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G7 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A63K-S5913-G10	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G10 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A63K-S5913-G25	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G25 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A63K-S5913-G50	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G50 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase
AUTONICS-A63K-S5913-G100	AUTONICS	Stepper motor \| AK-G Series \| Geared 5-phase \| □ 59 mm G100 ratio \| gearbox built-in \| DC \| Cable \| IP54 \| geared 5-phase

[AUTONICS] AK-R Series Built-In Rotary Actuator Type 5-Phase Stepper Motors

Built-in rotary actuator 5-phase stepper motors with harmonic-drive style reducer. Compact integrated rotary actuator solution.

Brand: Autonics Category: 5-Phase Stepper Motor 6 models

Built-in rotary actuator 5-phase stepper motors with harmonic-drive style reducer. Compact integrated rotary actuator solution.

Product Code	Brand	Spec
AUTONICS-A4K-S564-R5	AUTONICS	Stepper motor \| AK-R Series \| Rotary actuator 5-phase \| A4K-S564 5:1 ratio \| rotary actuator \| DC \| Cable \| IP54 \| rotary actuator 5-phase
AUTONICS-A4K-S564-R10	AUTONICS	Stepper motor \| AK-R Series \| Rotary actuator 5-phase \| A4K-S564 10:1 ratio \| rotary actuator \| DC \| Cable \| IP54 \| rotary actuator 5-phase
AUTONICS-A21K-S596-R5	AUTONICS	Stepper motor \| AK-R Series \| Rotary actuator 5-phase \| A21K-S596 5:1 ratio \| rotary actuator \| DC \| Cable \| IP54 \| rotary actuator 5-phase
AUTONICS-A21K-S596-R10	AUTONICS	Stepper motor \| AK-R Series \| Rotary actuator 5-phase \| A21K-S596 10:1 ratio \| rotary actuator \| DC \| Cable \| IP54 \| rotary actuator 5-phase
AUTONICS-A41K-S599-R5	AUTONICS	Stepper motor \| AK-R Series \| Rotary actuator 5-phase \| A41K-S599 5:1 ratio \| rotary actuator \| DC \| Cable \| IP54 \| rotary actuator 5-phase
AUTONICS-A41K-S599-R10	AUTONICS	Stepper motor \| AK-R Series \| Rotary actuator 5-phase \| A41K-S599 10:1 ratio \| rotary actuator \| DC \| Cable \| IP54 \| rotary actuator 5-phase