Hand Tools

Hanshin's 133-1730 Piece Waterproof Fastener is a sealing fastener solution designed to secure components in moisture-exposed environments, sourced direct from Korea. Waterproof fasteners of this type are widely used in outdoor assemblies, marine equipment, and industrial enclosures where standard fasteners would be vulnerable to corrosion or water ingress. Request a quote today to access export-ready stock, competitive bulk pricing, and reliable supply through a KITA-registered Korean exporter.

Hanshin 133-1758 Piece Waterproof Fastener is a sealed fastening solution designed to prevent moisture ingress at the joint, sourced direct from Korea. Waterproof fasteners like this are commonly used in outdoor assemblies, marine equipment, enclosures, and anywhere exposed metalwork must resist water penetration over time. Request a quote today for export-ready supply, competitive Korea-direct pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Hanshin 133-1785 Piece Waterproof Fastener (Sponge) is a sponge-based sealing fastener designed to create moisture-resistant connections in assemblies, sourced direct from Korea. This type of fastener is commonly used in enclosures, panels, and structural joints where preventing water ingress is critical, making it a practical choice for manufacturers, fabricators, and maintenance teams working in wet or exposed environments. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

Hanshin Sheet Metal Screws in steel deliver reliable thread-forming fastening for thin-gauge metal assemblies, sourced direct from Korea. Widely used in HVAC ductwork, electrical enclosures, and light fabrication, these screws bite cleanly into sheet metal without requiring a pre-tapped hole. Request a quote today for export-ready bulk supply, competitive per-unit pricing, and dependable fulfillment through a KITA-registered Korean exporter.

Hanshin 133-1934 Piece Rivet in aluminum is a lightweight blind fastening component sourced direct from Korea. Aluminum rivets are widely used in sheet metal assembly, HVAC ductwork, signage, and light structural applications where corrosion resistance and easy installation without rear access are priorities. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Hanshin's 133-2003 Piece Rivet in stainless steel is a corrosion-resistant blind fastener designed for secure, permanent joining of materials, sourced direct from Korea. Stainless steel rivets like this are widely used in sheet metal assembly, marine fabrication, HVAC ducting, and other applications where moisture or chemical exposure demands lasting joint integrity. Request a quote today for export-ready supply of this fastener at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The Hanshin 133-2137 Hand Press delivers precise manual pressing force for assembly and fastening tasks, sourced direct from Korea. Hand presses in this category are commonly used in light fabrication, electronics assembly, and workshop operations where controlled downward pressure is needed without powered equipment. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Hanshin 133-2191 Cutting Stone Center Punch in a hexagonal shank design delivers precise starting points for drilling and marking operations, sourced direct from Korea. Hexagonal center punches are a workshop staple for metalworkers, fabricators, and maintenance crews who need a secure, non-rolling grip and accurate indentation before drilling into hard materials. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

Hanshin 133-2225 Cutting Stone Center Punch (Hexagonal, A) is a hexagonal center punch designed for marking precise starting points on cutting stone workpieces, sourced direct from Korea. Center punches in this category are commonly used by stone fabricators, masonry workers, and construction tradespeople to create accurate indentation marks that guide drilling or cutting operations on hard stone surfaces. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

Hanshin 133-2252 Cutting Stone Grinding Stone in a hexagonal WA configuration delivers precise abrasive cutting and surface grinding action, sourced direct from Korea. Hexagonal grinding stones of this type are commonly used in metalworking and fabrication environments where controlled material removal and edge finishing on steel or similar workpieces are required. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Hanshin 133-2474 Grinding Stone Disc Paper with Cross Hole is an abrasive disc designed for surface grinding and material removal applications, sourced direct from Korea. The cross-hole design improves dust evacuation during grinding, making it a practical choice for metalworking, fabrication shops, and maintenance crews working on deburring, finishing, or surface preparation tasks. Request a quote today for export-ready supply of this abrasive consumable at competitive pricing through a KITA-registered Korean exporter.

Hanshin Grinding Stone Disc Paper (Cross Hole) is an abrasive disc designed for surface grinding and material removal applications, sourced direct from Korea. The cross-hole design improves dust extraction and heat dissipation during use, making it a practical choice for metalworking, woodworking, and general fabrication tasks where consistent surface finish matters. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The Hanshin 133-2562 Rubber Mallet is a hand-striking tool designed for impact work that requires a non-marring surface, sourced direct from Korea. Rubber mallets of this type are commonly used in assembly, woodworking, flooring installation, and light fabrication where protecting the workpiece surface is essential. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

Hanshin Hammer Rubber Mallet (White) is a non-marring striking tool designed for applications where surface protection is critical, sourced direct from Korea. Rubber mallets in this category are commonly used by woodworkers, tile setters, and assembly technicians who need to apply force without damaging finished surfaces or delicate components. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Hanshin's Double-sided Rubber Mallet delivers controlled, non-marring impact for assembly and disassembly tasks, sourced direct from Korea. Fabricators, woodworkers, and maintenance technicians rely on dual rubber faces to strike surfaces without leaving marks or causing damage to finished workpieces. Request a quote today for export-ready supply, competitive pricing, and dependable fulfillment through a KITA-registered Korean exporter.

Hanshin Lead Ball Hammer is a hand tool designed for striking, shaping, and deadblow-style applications where minimal rebound and surface marking are critical concerns, sourced direct from Korea. Lead ball hammers are commonly used in metalworking, assembly, and maintenance tasks where a non-sparking or soft-faced strike is required to avoid damaging precision components or finished surfaces. Request a quote today to access export-ready stock, competitive wholesale pricing, and reliable supply through a KITA-registered Korean exporter.

Hanshin 520-4188 Grinding Stone Sanding Block is a manual abrasive finishing tool designed for smoothing, deburring, and surface preparation, sourced direct from Korea. Sanding blocks of this type are commonly used in metalworking, fabrication, and maintenance environments where controlled hand pressure is needed to dress surfaces, remove sharp edges, or prep welds for inspection. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

Hanshin 520-4203 Grinding Stone Disc Sander Paper is an abrasive disc designed for surface grinding and material removal, sourced direct from Korea. Fabricators, metalworkers, and stone finishers rely on this type of disc sander paper to smooth, shape, and prepare surfaces on hard materials including stone, concrete, and similar substrates. Request a quote today for export-ready supply with competitive pricing through a KITA-registered Korean exporter.

Hanshin H-51 Metal Pruning Shears are heavy-duty cutting hand tools designed for clean, precise trimming of branches and stems, sourced direct from Korea. Pruning shears of this type are commonly used by landscapers, groundskeepers, nursery workers, and agricultural operations that require reliable, repetitive cutting performance in the field. Request a quote today for export-ready supply, competitive wholesale pricing, and the confidence of purchasing through a KITA-registered Korean exporter.

Hanshin HLTC-600D is a laser-guided tile cutter designed for precise straight cuts on ceramic, porcelain, and similar tile materials, sourced direct from Korea. Contractors, tilers, and renovation crews rely on laser tile cutters like this to achieve accurate cut lines quickly on site, reducing waste and rework during flooring and wall tiling projects. Request a quote today to access export-ready supply, competitive pricing, and the backing of a KITA-registered Korean exporter.