Pneumatics & Hydraulics

Jeil Wire FST-18 Tacker Pin is a pneumatic fastener designed for use with pin tacker tools, sourced direct from Korea. These fine-gauge pins are commonly driven by air-powered pin tackers in furniture assembly, cabinet making, and lightweight trim work where minimal surface marking is essential. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Jeil Wire JCN2132DS Tacker Pin Power Tool Nail (Twisted) is a twisted-shank pneumatic nail designed for secure fastening in tacker and power nailer applications, sourced direct from Korea. Twisted-shank nails provide enhanced holding power compared to smooth-shank variants, making them a practical choice for woodworking, furniture assembly, crating, and light construction tasks where pull-out resistance matters. Request a quote today for export-ready bulk supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Jeil Wire JCN2138DS Tacker Pin Power Tool Nail (Twisted) is a twisted-shank nail designed for use with power tacker tools, sourced direct from Korea. Twisted shank nails provide enhanced holding strength compared to smooth-shank alternatives, making them a practical choice for contractors and manufacturers requiring secure, vibration-resistant fastening in wood, framing, and similar substrate applications. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

Jeil Wire JPN2950-BRT Twisted Tacker Pin Stick Nails deliver secure, twist-shank fastening performance for pneumatic stick nailers, sourced direct from Korea. Twisted-shank pins are commonly used in upholstery, insulation board attachment, and light framing applications where enhanced holding power over smooth-shank fasteners is required. Request a quote today for export-ready bulk supply at competitive pricing through a KITA-registered Korean exporter.

Jeil Wire LST-18 Tacker Pin is a pneumatic fastening consumable designed for use with pin tackers and nailers, sourced direct from Korea. These fine-gauge pins are commonly used in light woodworking, cabinet assembly, and trim finishing applications where minimal surface damage and a clean finish are priorities. Request a quote today for export-ready supply of Jeil Wire tacker pins at competitive pricing through a KITA-registered Korean exporter.

Jeil Wire ST-18 Tacker Pins are industrial staple-type fasteners designed for use with pneumatic pin tackers, sourced direct from Korea. These pins are commonly used in furniture assembly, upholstery, and lightweight wood framing applications where fast, secure fastening is critical to production throughput. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

Jeil Wire T50 Tacker Pins are fasteners designed for use with T50-type staple tackers and pneumatic staplers, sourced direct from Korea. These pins are commonly used in upholstery, insulation installation, wire management, and light construction tasks where fast, reliable staple-style fastening is required. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

Jeil 1006 Tacker Pins are narrow-crown fasteners designed for use with pneumatic tacker tools, sourced direct from Korea. Commonly used in upholstery, fabric fastening, and light trim work, these pins allow rapid, clean attachment to wood and composite substrates without surface damage. Request a quote today for export-ready bulk supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Jeil 2132 Tacker Pin Power Tool Nail (Twisted) is a twisted-shank fastener designed for use with pneumatic tacker tools, sourced direct from Korea. Twisted-shank nails provide enhanced holding strength in wood, board, and framing applications, making them a practical choice for furniture manufacturing, pallet assembly, and general carpentry operations. Request a quote today for export-ready bulk supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

Jeil 30 Tacker Pin Insulation Nail is a pneumatic fastener designed to secure insulation board and lightweight materials, sourced direct from Korea. Widely used in construction and HVAC installation work, these pins are driven by tacker guns to hold foam, mineral wool, or rigid insulation panels firmly against walls, ceilings, and framing. Request a quote today for export-ready bulk supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Jeil 410 Tacker Pin is a pneumatic fastener consumable designed for use with pin tackers and fine-finish nailers, sourced direct from Korea. These slender, headless pins are commonly used in trim carpentry, cabinet assembly, and light woodworking where a nearly invisible fastening point is needed. Request a quote today for export-ready supply of Jeil tacker pins at competitive pricing, fulfilled by a KITA-registered Korean exporter.

Jeil 422 Taka Air Tacker is a pneumatic fastening tool designed to drive staples or tacks with speed and precision, sourced direct from Korea. Air tackers of this type are widely used in upholstery, furniture assembly, and light woodworking where rapid, consistent fastener placement is essential. Request a quote today for export-ready supply, competitive Korea-direct pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Jeil 618 Tacker Pin Thread Tack Pin is a pneumatic fastener designed for rapid fabric and material tacking applications, sourced direct from Korea. These pins are commonly used with pneumatic tacker guns in upholstery, textile, and light assembly work where fast, consistent fastening into soft or composite materials is required. Request a quote today for export-ready bulk supply of Jeil tacker pins at competitive pricing through a KITA-registered Korean exporter.

The Jeil 630 Taka Air Tacker is a pneumatic fastening tool designed to drive tacks and staples with precision, sourced direct from Korea. Air tackers of this type are commonly used in upholstery, furniture assembly, and light woodworking applications where fast, consistent staple placement is essential. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

Jeil 631-2156 2132 Tacker Pin Power Tool Nail (Smooth) is a smooth-shank nail designed for use with pneumatic tacker and nailer tools, sourced direct from Korea. Smooth tacker pins of this type are commonly used in light fastening applications such as upholstery, trim work, and thin material assembly where a clean, flush finish is required. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The Jeil 631-2183 2132 Tacker Pin Power Tool Nail (Smooth) is a smooth-shank fastener designed for use with pneumatic tacker and nailer tools, sourced direct from Korea. Smooth tacker pins of this type are commonly driven into wood, composite board, or lightweight framing materials in furniture assembly, cabinetry, and general carpentry applications. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

Jeil 631-3216 Taka Air Tool Lubricant is a pneumatic tool oil designed to lubricate and protect the internal components of air-powered tools, sourced direct from Korea. Air nailers, impact wrenches, and other pneumatic tools rely on regular lubrication to reduce internal wear, prevent corrosion, and maintain consistent performance in demanding job-site conditions. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The Jeil 631-3544 BF30/422 Taka Cordless Tacker is a battery-powered fastening tool designed for driving brad nails and staples without the need for an air compressor or hose, sourced direct from Korea. Cordless tackers like this are widely used in finish carpentry, cabinet assembly, upholstery, and light woodworking applications where mobility and job-site flexibility are priorities. Request a quote today to access export-ready stock, competitive ex-works pricing, and reliable supply through a KITA-registered Korean exporter.

The Jeil 631-3988 BF30/422 Taka Cordless Tacker is a battery-powered fastening tool designed for driving brad nails or staples without the need for an air compressor or hose, sourced direct from Korea. Cordless tackers like this are commonly used in finish carpentry, furniture assembly, cabinet installation, and trim work where mobility and freedom from compressed air lines improve on-site efficiency. Request a quote today for export-ready supply, competitive OEM and wholesale pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Jeil 722 Tacker Pins are purpose-built fasteners designed for use with pin tacker tools, sourced direct from Korea. These fine-gauge pins are commonly used in finish carpentry, cabinet assembly, and lightweight trim work where a nearly invisible fastening point is essential. Request a quote today for export-ready supply of Jeil tacker pins at competitive pricing through a KITA-registered Korean exporter.