Power Tools

Ultra brand Band Saw Blade delivers precise straight and contour cutting performance for metal and wood applications, sourced direct from Korea. Band saw blades in this configuration are commonly used in fabrication shops, metalworking facilities, and woodworking operations where continuous, controlled cuts are essential. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The Ultra 1638×13×14T Band Saw Blade is a toothed cutting blade designed for continuous loop sawing applications, sourced direct from Korea. Band saw blades in this configuration are commonly used in woodworking, metalworking, and general fabrication shops where consistent, straight or contour cuts are required across a range of materials. Request a quote today to access export-ready stock, competitive wholesale pricing, and reliable supply through a KITA-registered Korean exporter.

The Ultra 1840×13×14T Band Saw Blade is a toothed cutting blade designed for continuous loop band saw machines, sourced direct from Korea. Band saw blades in this configuration are commonly used for straight and curved cuts through wood, plastics, or light non-ferrous materials in woodworking shops, fabrication facilities, and light manufacturing environments. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The Unika 12 Carbide Broach Cutter is a carbide-tipped annular cutting tool designed for magnetic drill systems, sourced direct from Korea. Carbide broach cutters are commonly used in steel fabrication, structural construction, and heavy equipment maintenance where clean, burr-free holes in thick metal plate are required without pilot drilling. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The Unika 14 Carbide Broach Cutter is a tungsten carbide-tipped annular cutting tool designed for magnetic drill systems, sourced direct from Korea. Carbide broach cutters are favored in structural steel fabrication, shipbuilding, and heavy equipment manufacturing where clean, burr-free holes in thick steel plate are required without center punching. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

Unika 17×280mm Hex Flat Chisel (Multi-tooth) is a heavy-duty chiseling attachment designed for breaking and shaping concrete, masonry, and hard surfaces, sourced direct from Korea. Multi-tooth flat chisels of this type are commonly used with rotary hammers and demolition hammers to channel, score, or strip material in construction, renovation, and civil works applications. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The Unika 17×280mm Hex Point Chisel is a heavy-duty concrete demolition accessory designed to break, chip, and channel hardened surfaces, sourced direct from Korea. Point chisels in this configuration are commonly used with rotary hammers and demolition hammers on construction and civil engineering sites to concentrate force into a single contact point, making them effective for breaking up concrete slabs, masonry, and similar hard materials. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Unika 280-12.7 2-Flute Hex Hammer Drill Bit is a carbide-tipped rotary hammer drill bit designed for fast, efficient penetration into concrete and masonry, sourced direct from Korea. Two-flute hex shank bits like this are commonly used in construction and renovation work where contractors need reliable dust extraction and consistent bore quality in concrete, brick, and block materials. Request a quote today for export-ready supply, competitive Korea-direct pricing, and fulfillment through a KITA-registered Korean exporter.

The Unika 393-1385 34 Carbide Broach Cutter is a carbide-tipped annular cutting tool designed for magnetic drill systems, sourced direct from Korea. Carbide broach cutters are commonly used in steel fabrication, structural metalwork, and mechanical assembly applications where clean, precise through-holes are needed in thick or hardened steel plate. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The Unika 393-1631 34 Carbide Broach Cutter is a carbide-tipped annular cutting tool designed for magnetic drill presses, sourced direct from Korea. Carbide broach cutters are favored in structural steel fabrication, shipbuilding, and heavy equipment manufacturing where clean, precise through-holes in thick metal plate are required without the material waste of conventional twist drilling. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The Unika 393-1808 Point Pin is a carbide-tipped accessory designed for precise pilot-point engagement in magnetic drill applications, sourced direct from Korea. Carbide point pins are commonly used in metal fabrication and structural steel work to initiate accurate hole positioning before annular cutter engagement, reducing walking and improving cut consistency. Request a quote today for export-ready supply of this Unika carbide point pin at competitive pricing, fulfilled by a KITA-registered Korean exporter.

Unika 505-12.7 2-Flute Hex Hammer Drill Bit is a carbide-tipped rotary impact drill bit designed for fast, accurate penetration into concrete and masonry, sourced direct from Korea. Two-flute hammer drill bits like this are commonly used in construction and maintenance trades for anchor installation, fixture mounting, and core penetration through reinforced concrete walls and slabs. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The Unika B-3.0 Concrete Drill is a rotary percussion drilling tool designed for driving into concrete, masonry, and stone surfaces, sourced direct from Korea. Contractors, site crews, and maintenance teams rely on this category of tool for anchor bolt installation, conduit routing, and structural fastening work across construction and renovation projects. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The Unika B-8.0 Concrete Drill is a rotary percussion drilling tool designed for boring into concrete, masonry, and similar hard substrates, sourced direct from Korea. Concrete drills of this type are commonly used by construction crews, contractors, and facility maintenance teams when installing anchors, conduit runs, or structural fasteners in reinforced concrete surfaces. Request a quote today to access export-ready supply, competitive ex-works pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Unika BJ-3.0 is a hex shank concrete drill bit designed for fast, accurate penetration into concrete and masonry surfaces, sourced direct from Korea. Hex shank drill bits like this are commonly used with impact drivers and rotary hammer drills on construction sites, renovation projects, and infrastructure work where secure bit retention and reduced slippage are essential. Request a quote today for export-ready supply of Unika concrete drill bits at competitive pricing through a KITA-registered Korean exporter.

Unika DJW-5.0 Diamond Core Drill is a diamond-tipped core drilling tool designed for cutting precise cylindrical holes through concrete and masonry, sourced direct from Korea. Core drills of this type are commonly used by construction crews, civil contractors, and utility installers when routing conduit, pipes, or anchors through reinforced concrete slabs, walls, and foundations. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The Unika DJW-PGD Diamond Core Drill Guide is a precision alignment accessory designed to keep core drills on-axis during concrete penetration work, sourced direct from Korea. Contractors and site crews rely on core drill guides to prevent bit walking, reduce breakout, and maintain clean, accurate holes through reinforced concrete slabs, walls, and masonry. Request a quote today for export-ready supply of this Unika drilling accessory through ProSource MRO, your KITA-registered Korean exporter, offering competitive pricing on bulk and project-volume orders.

Unika MJ3 Multi-Purpose Drill is a versatile concrete drilling tool designed for demanding penetration tasks, sourced direct from Korea. Multi-purpose drills in this category are commonly used by construction crews and contractors for boring through concrete, masonry, and similar hard substrates on job sites. Request a quote today for export-ready supply with competitive pricing, fulfilled by a KITA-registered Korean exporter.

The Unika P-425-SDN Non-Porous is a concrete drill designed for penetrating dense, non-porous surfaces with precision, sourced direct from Korea. Concrete drills of this type are commonly used in construction and civil engineering applications where clean, accurate hole formation in hard substrates such as reinforced concrete or stone is required. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Unika RJ3 Multi-Purpose Drill is a concrete-capable drilling tool designed for demanding material penetration, sourced direct from Korea. Multi-purpose drills in this category are commonly used by construction crews and contractors for boring through concrete, masonry, and similar hard substrates on job sites. Request a quote today to access export-ready stock, competitive wholesale pricing, and reliable supply through a KITA-registered Korean exporter.