Air Tools

The UDT GP-842 Gear Oil Air Punch is a pneumatically powered punch tool designed for precise hole-making in sheet metal and structural materials, sourced direct from Korea. Air-driven punches like this are commonly used in fabrication shops, HVAC ductwork installations, and enclosure manufacturing where consistent, clean holes are needed without the heat or distortion of drilling. Request a quote today to access export-ready supply, competitive OEM and bulk pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT GP-902A Gear Oil Air Belt Sander is a pneumatically powered abrasive tool designed for surface finishing and material removal, sourced direct from Korea. Belt sanders of this type are commonly used in metalworking, fabrication shops, and maintenance environments where fast, consistent stock removal or surface prep on curved and flat workpieces is required. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT GP-927 Gear Oil Air Hand Sander is a pneumatic sanding tool designed for surface finishing and material removal, sourced direct from Korea. Air-powered hand sanders of this type are commonly used in metalworking, automotive bodywork, and fabrication shops where consistent abrasion and operator control are priorities. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT GP-940 Gear Oil Air Chisel Pen is a pneumatic chiseling tool designed for precision material removal and surface work, sourced direct from Korea. Air chisel pens of this type are commonly used in metalworking, automotive repair, and light fabrication tasks where controlled chipping, scaling, or cutting is needed in tight or detailed areas. Request a quote today to access export-ready stock, competitive ex-works pricing, and the reliable supply chain of a KITA-registered Korean exporter.

The UDT GP-940 Gear Oil Air Chisel with Pen Tip is a pneumatic chiseling tool designed for precision material removal and surface work, sourced direct from Korea. Pen tip air chisels are commonly used in metalworking, automotive bodywork, and light fabrication tasks where controlled, targeted impact is needed in tight or detailed areas. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT GP-948 Air Finishing File is a pneumatic air tool designed for precision surface filing and finishing work, sourced direct from Korea. Powered by compressed air, this type of tool is commonly used in metalworking, fabrication, and automotive bodywork applications where consistent material removal and smooth surface preparation are required. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT GP-948 is a gear oil-lubricated pneumatic finishing file designed for precision surface work on metal, sourced direct from Korea. Air-powered finishing files like this are commonly used in fabrication shops and toolrooms to smooth welds, deburr edges, and refine contours in tight or hard-to-reach areas where rotary tools cannot easily maneuver. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The UDT KP-4701-K5 Air Gun Hammer Spring is a replacement internal spring component for pneumatic air hammers, sourced direct from Korea. Hammer springs in air tools absorb and transfer percussive energy within the tool's internal mechanism, making them a critical wear part that requires periodic replacement to maintain consistent striking performance. Request a quote today for export-ready supply of this OEM-compatible replacement component at competitive pricing through a KITA-registered Korean exporter.

The UDT S-20 Air Gun Air Nipper Blade is a replacement cutting blade designed for use with air-powered nipper tools, sourced direct from Korea. Air nipper blades are commonly used in manufacturing and assembly environments to cleanly cut wire ties, plastic runners, electronic component leads, and light materials at high speed. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The UDT UCR-202N Air Gun Cordless Compressor is a portable, battery-powered compressed air solution for inflation and air-blowing tasks, sourced direct from Korea. Cordless compressors of this type are commonly used in automotive workshops, construction sites, and maintenance operations where access to a fixed air supply is limited or impractical. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT UD-005A Air Nipper is a pneumatic cutting tool designed for fast, precise trimming and clipping tasks, sourced direct from Korea. Air nippers are commonly used in electronics assembly, plastic injection molding, and light manufacturing lines to cut wire leads, sprues, and plastic gates with minimal operator fatigue. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT UD-030I Air Gun Air Crimper is a pneumatic crimping tool designed to deliver fast, consistent terminal and connector crimps, sourced direct from Korea. Air crimpers of this type are commonly used in electrical assembly, wire harness production, and panel wiring operations where repetitive hand crimping would slow output or cause operator fatigue. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The UDT UD-0S Air Chipping Hammer is a pneumatic impact tool designed for chipping, scaling, and surface preparation work, sourced direct from Korea. Air chipping hammers of this type are commonly used in metalworking, construction, and foundry environments to remove slag, rust, scale, or unwanted material from hard surfaces. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT UD-102 Fin Components Blade is a replacement blade set for pneumatic air tools, sourced direct from Korea. Fin blades are consumable cutting or scraping elements used within air-powered rotary or reciprocating tools, making them essential maintenance stock for facilities running continuous pneumatic operations. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT UD-102 Fin Components Cylinder is a pneumatic cylinder component designed to deliver controlled linear motion in compressed-air systems, sourced direct from Korea. Fin-style cylinder components like this are commonly integrated into automated assembly lines, clamping fixtures, and material handling equipment where compact actuation and reliable stroke performance are essential. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The UDT UD-1033A Air Ratchet Wrench is a pneumatic ratcheting tool designed for efficient fastener driving and removal in tight spaces, sourced direct from Korea. Air ratchet wrenches like this are commonly used in automotive workshops, assembly lines, and maintenance bays where rapid nut and bolt work is needed without the swing clearance required by standard ratchets. Request a quote today for export-ready supply of the UDT UD-1033A at competitive pricing through a KITA-registered Korean exporter.

The UDT UD-1038 Air Belt Sander is a pneumatic abrasive tool designed for continuous belt sanding operations, sourced direct from Korea. Air belt sanders of this type are commonly used in metal fabrication, woodworking, and finishing applications where fast, consistent material removal across flat or contoured surfaces is required. Request a quote today for export-ready supply of UDT air tools at competitive pricing through a KITA-registered Korean exporter.

The UDT UD-1042 Air Components Piston is a precision internal replacement part for pneumatic tool assemblies, sourced direct from Korea. Pistons of this type serve as the core reciprocating element in air-driven tools, making them essential for maintenance teams performing overhauls or repairs on pneumatic equipment across manufacturing and industrial facilities. Request a quote today to access export-ready supply, competitive OEM-grade pricing, and the reliability of a KITA-registered Korean exporter.

The UDT UD-1042 Air Components Throttle Pin is a precision pneumatic control component designed to regulate airflow within air tool assemblies, sourced direct from Korea. Throttle pins of this type are commonly used as replacement or maintenance parts in pneumatic tools, allowing technicians to restore proper speed and airflow control to grinders, drills, and impact wrenches during overhaul or repair. Request a quote today to access export-ready supply of this air tool component at competitive pricing through a KITA-registered Korean exporter.

The UDT UD-1045 Air Jet Chisel is a pneumatic chiseling tool designed for cutting, scaling, and surface preparation work, sourced direct from Korea. Air chisels like this are commonly used in metalworking, automotive, and construction trades to remove rust, break welds, or chip material from hard surfaces. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.