Hand Tools

LOBSTER JBUM-XGB series black hybrid X adjustable wrench. X-Drive bolt strip prevention. 2-window size reading. 3-point jaw bolt marking. Rounded handle. Satin black finish. Available sizes: 8 in (JBUM30XGB) / 10 in (JBUM36XGB). Max jaw: 30–36mm.

LOBSTER JB165PWN black power nipper. Compact design. Elastomer grip. Piano wire and hard steel cutting capable. Soft wire: 2.0mm / copper wire: 3.2mm / piano wire: 1.0mm. Length: 165mm. Size: 7 in. Origin: Japan.

LOBSTER JB185PWN black power nipper. Compact design. Elastomer grip. Piano wire and hard steel cutting capable. Soft wire: 2.15mm / copper wire: 3.5mm / piano wire: 1.2mm. Length: 187mm. Size: 7 in. Origin: Japan.

LOBSTER JB200PWNU black power nipper with thin blade. Compact design. Clean cut surface. Elastomer grip. Soft wire: 2.0mm / copper wire: 3.2mm. Length: 199mm. Size: 8 in. Origin: Japan.

LOBSTER JB225PWNU black power nipper with thin blade. Compact design. Elastomer grip. Soft wire: 2.6mm / copper wire: 4.0mm. Length: 218mm. Size: 9 in. Origin: Japan.

LOBSTER JBUM-S series black short hybrid adjustable wrench. Compact for tight spaces. New multi-direction jaw for easy nut engagement. Available sizes: 6 in (JBUM-24S) / 8 in (JBUM-30S) / 10 in (JBUM-36S). Max jaw: 24–36mm.

LOBSTER J200PWP black side cutting plier. Black type slim exterior. Compact force for thick wire cutting. Piano wire and hard steel cutting capable. Rolling function (1.25–2 mm²). Slim elastomer grip. Soft wire: 3.0mm / copper wire: 3.6mm. Length: 192mm. Size: 8 in. Origin: Japan.

LOBSTER J225PWP black side cutting plier. Piano wire and hard steel cutting capable. Rolling function added. Slim elastomer grip. Soft wire: 3.4mm / copper wire: 4.0mm. Length: 218mm. Size: 9 in. Origin: Japan.

LOBSTER JBTG200NA black tri-grip plier. Tri-grip jaw grips from 3 points for perfect flat nut holding. Compatible: M2–M6 machine screws / M3–M5 tapping screws. Length: 200mm. Size: 8 in. Origin: Japan.

LOBSTER CK-150 cable cutter. CVT 14mm² cutting capacity. Lightweight and powerful. Black finish. Size: 15 in. Length: 375mm. Capacity: 150mm². Origin: Japan.

LOBSTER P200 combination plier. Functions: bolt/nut tightening and loosening, wire cutting, bending, clamping, and thin plate gripping. Jaw opening: 26mm. Length: 200mm. Size: 8 in. Origin: Japan.

LOBSTER P250 combination plier. Functions: bolt/nut work, wire cutting, bending, clamping, and thin plate gripping. Jaw opening: 32mm. Length: 250mm. Size: 10 in. Origin: Japan.

LOBSTER Cutting Nipper 2716G is a hand tool designed for cleanly cutting wire, soft metal, and similar materials, sourced direct from Korea. Cutting nippers of this type are commonly used in electrical work, general fabrication, and assembly tasks where precise, flush cuts are needed in tight spaces. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

LOBSTER Cutting Nipper J100NN is a hand-operated cutting nipper designed for precise wire and component trimming, sourced direct from Korea. Nippers of this type are widely used in electronics assembly, electrical work, and light fabrication where clean, controlled cuts on small-gauge wire or leads are essential. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

LOBSTER Cutting Nipper NN125 is a hand-operated cutting nipper designed for precise material separation and trimming, sourced direct from Korea. Cutting nippers in this category are commonly used by electricians, electronics assemblers, and maintenance technicians to cleanly cut wire, soft metal, plastic ties, and excess leads in tight workspaces. Request a quote today to access export-ready stock, competitive wholesale pricing, and reliable fulfillment through a KITA-registered Korean exporter.

LOBSTER Diagonal Cutting Plier 2706 is a side-cutting hand tool designed for cleanly snipping wire, cable ties, and soft fasteners, sourced direct from Korea. Diagonal cutting pliers are a staple across electrical work, electronics assembly, and general maintenance, where precise, flush cuts on wire and small components are needed on a daily basis. Request a quote today for export-ready supply of this LOBSTER cutting plier at competitive pricing, fulfilled by a KITA-registered Korean exporter.

LOBSTER Diagonal Cutting Plier 2724S is a side-cutting hand tool designed for cleanly snipping wire, cable, and soft fasteners, sourced direct from Korea. Diagonal cutting pliers like this are a go-to for electricians, maintenance technicians, and assembly workers who need precise flush or angled cuts in confined spaces. Request a quote today for export-ready supply of this tool at competitive pricing through a KITA-registered Korean exporter.

LOBSTER Diagonal Cutting Plier KN125 is a side-cutting hand tool designed for cleanly snipping wire, cable ties, and soft metal leads, sourced direct from Korea. Diagonal cutting pliers like this are a standard reach-for tool on assembly lines, in electrical work, and wherever technicians need precise, flush cuts in confined spaces. Request a quote today for export-ready supply of the KN125 through ProSource MRO, a KITA-registered Korean exporter offering competitive pricing for bulk and repeat orders.

LOBSTER Grip Adapter GR-808R is a plier-type gripping tool designed to extend reach and improve leverage when securing or manipulating workpieces, sourced direct from Korea. Grip adapters in this category are commonly used by maintenance technicians and assembly workers who need a reliable mechanical advantage in confined spaces or when handling components that standard pliers cannot easily access. Request a quote today to secure export-ready supply of the GR-808R at competitive pricing through a KITA-registered Korean exporter.

LOBSTER HN-010 hand nut riveter. For M5 / M6 / M8 / M10 rivet nuts. Includes nose piece and screw mandrel. Origin: Japan.