Industrial Supplies

Sangah SMN1/8 Stainless Steel Thread Center Nipple is a short, double-ended threaded fitting designed to join two female-threaded connections within a piping run, sourced direct from Korea. Center nipples like this are widely used in fluid handling systems, process piping, and general plumbing installations where a compact, corrosion-resistant connector is needed between valves, fittings, or equipment. Request a quote today for export-ready supply with competitive pricing, fulfilled by a KITA-registered Korean exporter.

The Sangah SN6-1/4 Stainless Steel Threaded Hexagonal Nipple is a corrosion-resistant pipe fitting designed to connect two female-threaded components in a piping system, sourced direct from Korea. Hex nipples of this type are widely used in process piping, chemical handling, and fluid transfer applications where a wrench-flat surface is needed for secure tightening and leak-free assembly. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Sangah SP1/4 Stainless Steel Threaded Plug is a corrosion-resistant pipe closure fitting designed to seal threaded pipe openings, sourced direct from Korea. Threaded plugs like this are widely used in plumbing, hydraulic, and pneumatic systems to cap off unused ports or temporarily block flow during maintenance and pressure testing. Request a quote today for export-ready supply of this fitting at competitive pricing through a KITA-registered Korean exporter.

Sangah SPS1/8 Stainless Steel Thread Socket is a corrosion-resistant pipe fitting designed for secure threaded connections in fluid and gas line assemblies, sourced direct from Korea. Stainless steel thread sockets are widely used in plumbing, process piping, and industrial fluid systems where resistance to moisture, chemicals, or harsh operating environments is essential. Request a quote today for export-ready supply of this fitting through ProSource MRO, a KITA-registered Korean exporter offering competitive pricing for bulk and project procurement.

The Sangah SRL1 1/4-1/2 Stainless Steel Threaded Elbow 45° is a corrosion-resistant pipe fitting designed to redirect flow at a 45-degree angle, sourced direct from Korea. Threaded elbows of this type are commonly used in plumbing, process piping, and fluid handling systems where directional changes are needed while maintaining a leak-free, pressure-rated connection. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Sangah SRS1/4-1/8 Stainless Steel Threaded Reducer is a precision-machined pipe fitting designed to connect two threaded pipes of different diameters, sourced direct from Korea. Threaded reducers like this are widely used in plumbing, fluid handling, and process piping systems where a transition between pipe sizes is needed without compromising flow integrity. Request a quote today for export-ready supply of this fitting at competitive pricing, fulfilled by a KITA-registered Korean exporter.

Sangah SS1/4 Stainless Steel Threaded Socket is a corrosion-resistant pipe fitting designed to create secure threaded connections in piping systems, sourced direct from Korea. Threaded sockets like this are widely used in plumbing, process piping, and fluid handling installations where a reliable, leak-resistant joint between pipe sections is essential. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

Sangah SSN1/8 Stainless Steel Thread Short Nipple is a compact threaded pipe fitting designed to connect two female-threaded components in close proximity, sourced direct from Korea. Short nipples like this are widely used in process piping, fluid handling systems, and industrial plumbing where minimal projection between fittings is required. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

Sangah SSP1/4 Stainless Thread Siphon is a corrosion-resistant siphon fitting designed for controlled fluid transfer in pressurized line applications, sourced direct from Korea. Thread siphons of this type are commonly used in process piping systems to protect pressure gauges and instrumentation from direct contact with hot, corrosive, or pulsating media. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Sangah SU1 1/4 Stainless Steel Threaded Union is a corrosion-resistant pipe fitting designed to join two sections of threaded pipe for easy assembly and disassembly, sourced direct from Korea. Threaded unions like this are widely used in process piping, fluid handling systems, and maintenance applications where sections of pipe need to be regularly disconnected without disturbing the surrounding line. Request a quote today for export-ready supply of this fitting at competitive pricing through a KITA-registered Korean exporter.

Sangah SUL1/4 Stainless Steel Threaded Elbow 90° is a directional pipe fitting designed to change flow direction in threaded piping systems, sourced direct from Korea. Ninety-degree elbows of this type are widely used in fluid handling, process piping, and utility line installations where a right-angle turn is required between threaded pipe segments. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Sangah SUL45-1/4 Stainless Steel Threaded Elbow 45° is a corrosion-resistant pipe fitting designed to redirect flow at a 45-degree angle, sourced direct from Korea. Threaded elbows of this type are commonly used in plumbing, process piping, and fluid handling systems where a gradual directional change is needed without welding. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Sangah SUT1/4 Stainless Steel Threaded Tee is a corrosion-resistant pipe fitting designed to split or combine flow in threaded piping systems, sourced direct from Korea. Threaded tees like this are commonly used in fluid handling, compressed air lines, and process piping installations where a reliable three-way connection point is required. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

Sangah TELA R1/8-U7/16 Steel Nipple Elbow is a threaded pipe fitting combining PT and UNF thread standards for compact directional connections, sourced direct from Korea. This type of hybrid-thread nipple elbow is commonly used in hydraulic, pneumatic, and fluid line assemblies where a 90-degree transition between pipe and machine threads is required in tight spaces. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The Sangah TELC R1/8-G1/8 Steel Nipple Elbow is a threaded elbow fitting combining PT (taper) and PF (parallel) pipe thread standards, sourced direct from Korea. Steel nipple elbows of this type are commonly used in compressed air, hydraulic, and fluid piping systems where a directional change is needed between components with different thread specifications. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

Sangah's TELD R1/8-R1/8 Iron Nipple Elbow (PT+PT) is a threaded pipe fitting designed to create a 90-degree directional change in piping runs, sourced direct from Korea. Iron nipple elbows with PT-threaded ends are commonly used in compressed air, hydraulic, and general fluid distribution systems where reliable sealed connections are required in tight spaces. Request a quote today for export-ready supply, competitive pricing, and dependable service through a KITA-registered Korean exporter.

Sangah TFA R1/8-R1/8 Steel Nipple Reducer is a threaded pipe fitting designed to connect and adapt pipe sections within fluid or gas line assemblies, sourced direct from Korea. Steel nipple reducers like this are commonly used by maintenance and plumbing technicians to join pipes of differing or matching thread sizes in compressed air, hydraulic, and general piping systems. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

Sangah THB R1/4-R1/8 Iron Nipple Bushing is a threaded reducing fitting designed to connect pipes of differing diameters, sourced direct from Korea. Iron nipple bushings like this are widely used in compressed air lines, hydraulic systems, and general fluid piping wherever a secure, leak-resistant reduction between two threaded pipe ends is needed. Request a quote today for export-ready supply with competitive pricing through a KITA-registered Korean exporter.

Sangah THSA R1/8-R1/8 Iron Nipple Socket is a threaded pipe fitting designed to connect two pipe ends of equal size within a piping run, sourced direct from Korea. Iron nipple sockets like this are commonly used in compressed air lines, hydraulic systems, and general fluid conveyance installations where a secure, leak-resistant threaded joint is required. Request a quote today to access export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

Sangah TPA U7/16 Iron Nipple Plug is a threaded pipe fitting designed to seal and close off pipe ends and ports, sourced direct from Korea. Iron nipple plugs of this type are commonly used in hydraulic, pneumatic, and general plumbing systems to cap unused openings, prevent leaks, and maintain system pressure during maintenance or reconfiguration. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.