Magnetic Drills

UDT Binder UGP-35 Grafting Shears deliver precise cutting and tape-binding action for plant grafting work, sourced direct from Korea. Grafting shears like these are commonly used in horticultural and agricultural settings to make clean, matched cuts on stems and branches, allowing two plants to be joined for propagation or crop improvement. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

UDT Binder USC Binding Tape secures and bundles cables, hoses, and wiring harnesses in industrial environments, sourced direct from Korea. Binding tapes of this type are widely used in electrical installation, panel wiring, and equipment assembly to keep runs organized, protected, and compliant with tidy workmanship standards. Request a quote today for export-ready supply of UDT Binder products at competitive pricing through a KITA-registered Korean exporter.

UDT Binder's Branch Guide Retaining Pin is a replacement retention component for magnetic drill setups, sourced direct from Korea. In magnetic drilling applications, retaining pins secure guide components in position during operation, helping maintain alignment and preventing unwanted movement under load. Request a quote today for export-ready supply of this OEM-compatible replacement part at competitive pricing, fulfilled by a KITA-registered Korean exporter.

UDT Binder USCM-55 Branch Cable Tie (Economy Type) is a bundling and management fastener designed to organize and secure branching cable runs, sourced direct from Korea. Branch cable ties of this type are commonly used in electrical panel assembly, wire harness production, and industrial cable routing where multiple conductors must be neatly divided and held in place. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The UDT Electric UVP-140 Vacuum Pump is a vacuum pump unit sourced direct from Korea. Vacuum pumps of this type are commonly used in industrial and workshop settings to evacuate air or fluid from systems, supporting tasks such as HVAC servicing, brake bleeding, or degassing operations. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

UDT Lifting Magnet A-300L Alnico Terminal is a permanent magnetic lifting device designed for secure material handling, sourced direct from Korea. Alnico terminal lifting magnets are commonly used in steel fabrication shops, warehouses, and scrap yards to grip and move ferromagnetic workpieces without requiring an external power source. Request a quote today to access export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT Lifting Magnet HL-200 Hand Lifting Magnet is a permanent magnetic lifting device designed for secure, hands-free handling of ferrous workpieces, sourced direct from Korea. Hand lifting magnets of this type are widely used in fabrication shops, steel yards, and machine shops to move flat or round steel plates, blocks, and bars without the need for chains or slings. Request a quote today to access export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT MGH-100 is a permanent lifting magnet designed for securely gripping and moving ferrous materials, sourced direct from Korea. Lifting magnets of this type are widely used in fabrication shops, steel yards, and warehouses to handle plates, blocks, and structural steel without the need for slings or hooks. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

UDT MGH-600 Lifting Magnet delivers reliable magnetic lifting force for material handling applications, sourced direct from Korea. Permanent lifting magnets like this are commonly used in steel fabrication shops, warehouses, and machine shops to safely move steel plates, blocks, and cylindrical stock without slings or chains. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The UDT MGL-100 Lifting Magnet is a permanent lifting magnet designed to grip and move ferromagnetic materials securely, sourced direct from Korea. Fabricators, steel processors, and warehouse operations rely on this type of lifting magnet to handle steel plates, blocks, and round stock without the need for slings or hooks. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT MGS-100 Lifting Magnet is a permanent magnetic lifting device designed for safe, controlled handling of ferromagnetic materials, sourced direct from Korea. Fabricators, steel service centers, and warehouse operations rely on lifting magnets like this to move flat, round, and block-shaped steel pieces without slings or chains, reducing rigging time and improving shop floor safety. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT Mag Drill Parts #52 Magnet Switch is a replacement switching component for magnetic drill systems, sourced direct from Korea. Magnetic drill operators rely on properly functioning magnet switches to control the electromagnetic base that holds the drill securely to steel workstations during annular cutter operations. Request a quote today for export-ready supply of this OEM-compatible replacement part at competitive pricing, available through a KITA-registered Korean exporter.

UDT Mag Drill Parts C14 (#1+2) Power Cable Assembly (ASSY) delivers reliable electrical connectivity for UDT magnetic drill units, sourced direct from Korea. Power cable assemblies like this are essential replacement components for maintaining consistent motor performance and safe operation in magnetic drills used across steel fabrication, structural construction, and heavy equipment maintenance. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

UDT Mag Drill Parts C14 (#115) Carbon Brush is a replacement electrical contact component for magnetic drill motors, sourced direct from Korea. Carbon brushes are consumable parts that maintain the electrical connection between stationary and rotating motor components, making them essential for keeping magnetic drills running at full performance on steel fabrication, construction, and metalworking job sites. Request a quote today for export-ready supply of genuine OEM replacement parts at competitive pricing through a KITA-registered Korean exporter.

UDT Mag Drill Parts C14 (#29) Armature (Rotor) is a core internal replacement component for UDT magnetic drill units, sourced direct from Korea. Armatures are essential rotating elements within the drill motor, and replacing a worn or damaged rotor restores full motor performance and extends the working life of the magnetic drill. Request a quote today for export-ready supply of this OEM-compatible replacement part at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The UDT Mag Drill Parts C14 (#31) Bevel Pinion is a precision internal drive component designed to transfer rotational force within the gearbox assembly of compatible magnetic drill units, sourced direct from Korea. Bevel pinions of this type are critical replacement parts for maintaining proper gear engagement and torque transmission, making them essential for field repair and preventive maintenance of magnetic drills used in structural steel fabrication and metalworking. Request a quote today for export-ready supply of genuine UDT replacement components at competitive pricing through a KITA-registered Korean exporter.

UDT Mag Drill Parts C14 (#42) Bevel Gear is a precision replacement gear component for magnetic drill units, sourced direct from Korea. Bevel gears in mag drill assemblies transmit rotational force between intersecting shafts, making them critical to maintaining accurate drilling torque and drive alignment during heavy-duty metal fabrication work. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT Mag Drill Parts C14 (#56) Bracket is a structural component designed to support and secure assembly within compatible magnetic drill units, sourced direct from Korea. Replacement brackets like this are essential for maintaining the mechanical integrity of mag drill frames, commonly needed during field repairs or scheduled maintenance of drilling equipment in fabrication, steel construction, and metalworking environments. Request a quote today for export-ready supply of genuine UDT mag drill components at competitive pricing through a KITA-registered Korean exporter.

UDT Mag Drill Parts C14 (#58) Flat Washer is a replacement hardware component designed to maintain proper assembly and load distribution within magnetic drill units, sourced direct from Korea. Flat washers in magnetic drilling equipment help secure fastener connections, reduce surface wear, and ensure stable clamping force during heavy-duty metal cutting operations. Request a quote today for export-ready supply of genuine UDT replacement parts at competitive pricing through a KITA-registered Korean exporter.

The UDT Mag Drill Parts C14 (#62) Bracket is a replacement structural component designed to support and align key assemblies within compatible magnetic drill units, sourced direct from Korea. Replacement brackets like this are typically used by maintenance teams and equipment repair shops to restore damaged or worn magnetic drills to full working condition, extending the service life of the machine without full-unit replacement. Request a quote today to access export-ready supply of genuine UDT mag drill spare parts at competitive pricing through a KITA-registered Korean exporter.