Measuring & Inspection

The SHS 431-2204 Ring Gauge is a precision dimensional inspection tool used to verify shaft and cylindrical part diameters, sourced direct from Korea. Ring gauges are commonly used on the shop floor and in quality control departments to ensure machined components meet tolerance requirements during production and incoming inspection. Request a quote today for export-ready supply of SHS gauging tools at competitive pricing through a KITA-registered Korean exporter.

Simpo DT-105A Tachometer is a rotational speed measurement instrument sourced direct from Korea. Tachometers of this type are commonly used by maintenance technicians and engineers to monitor motor, shaft, and spindle RPM during equipment inspection, calibration, and preventive maintenance routines. Request a quote today for export-ready supply of the Simpo DT-105A at competitive pricing through a KITA-registered Korean exporter.

The Simpo DT-207LR Tachometer is a handheld rotational speed measurement instrument sourced direct from Korea. Tachometers of this type are commonly used by maintenance technicians and engineers to measure the RPM of motors, shafts, and rotating machinery without interrupting operations. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The Simpo DT-3015N is a digital stroboscope designed to freeze and measure the motion of rotating or reciprocating machinery components, sourced direct from Korea. Stroboscopes of this type are widely used in manufacturing and maintenance environments to inspect fans, motors, gears, and conveyor systems for surface defects, imbalance, or speed verification without stopping production. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The Simpo EE-1N is a contact-type tachometer designed to measure rotational speed directly from a rotating shaft or surface, sourced direct from Korea. Contact tachometers like this are commonly used by maintenance engineers and machine operators to verify motor speeds, conveyor line performance, and spindle RPM during equipment setup or routine inspection. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The Simpo EE-2N is a non-contact tachometer designed to measure rotational speed without physical contact with the target surface, sourced direct from Korea. Non-contact tachometers like this are widely used by maintenance technicians and engineers to monitor motor shafts, fans, and rotating machinery during preventive maintenance or troubleshooting without interrupting operation. Request a quote today for export-ready supply of the Simpo EE-2N through ProSource MRO, your KITA-registered Korean exporter offering competitive pricing on professional-grade measurement instruments.

The Simpo FGJN-2 Push Pull Tester (Digital) is a handheld force measurement instrument designed to quantify push and pull forces with digital readout precision, sourced direct from Korea. Digital push pull testers are widely used in quality control, assembly line verification, and component testing applications where accurate force measurement is critical to product integrity. Request a quote today for export-ready supply of the Simpo FGJN-2 at competitive pricing through a KITA-registered Korean exporter.

SK 0.16 × 1M Feeler Gauge is a precision thickness measurement tool sourced direct from Korea. Feeler gauges like this are widely used in mechanical assembly and maintenance to check clearances between mating parts, such as valve lash gaps, bearing fits, and machine alignments. Request a quote today for export-ready supply with competitive pricing through a KITA-registered Korean exporter.

The SK 430-0014 Feeler Gauge is a precision hand tool used to measure narrow gaps and clearances between mating components, sourced direct from Korea. Feeler gauges are commonly used by mechanics and maintenance technicians to check valve clearances, spark plug gaps, and bearing fits across automotive, manufacturing, and general machinery applications. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

SK 430-0272 Feeler Gauge is a precision thickness-measuring tool used to check clearances and gaps in mechanical assemblies, sourced direct from Korea. Feeler gauges like this are commonly used by machinists, maintenance technicians, and assemblers to verify critical gap tolerances in engines, gearboxes, and similar equipment. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

SK 800SWKD Taper Gauge Set is a precision hand tool designed to measure gap widths and material thickness in tight or tapered spaces, sourced direct from Korea. Taper gauges like this are commonly used by machinists, fabricators, and quality control technicians to quickly determine slot, groove, and gap dimensions without the need for calipers or feeler gauge sets. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

SK AA-1A Pin Gauge Set is a precision measurement tool used to verify hole diameters and feature dimensions with consistent accuracy, sourced direct from Korea. Pin gauge sets like this are commonly used by machinists, quality control inspectors, and toolroom technicians to check bore sizes, inspect drilled or reamed holes, and confirm fits during production and incoming inspection. Request a quote today for export-ready supply of this SK gauging tool at competitive pricing, fulfilled by a KITA-registered Korean exporter.

SK AP-130 Angle Protractor is a precision hand tool designed to measure and transfer angles accurately, sourced direct from Korea. Machinists, toolmakers, and fabricators rely on angle protractors like this to verify bevels, set up miter cuts, and inspect angular tolerances on machined or fabricated workpieces. Request a quote today for export-ready supply through a KITA-registered Korean exporter, with competitive pricing available for both sample and volume orders.

SK ASQ-100PCKD Plastic Meter Ruler is a lightweight, straight-edge measuring tool for linear measurement tasks, sourced direct from Korea. Plastic rulers of this type are commonly used on drafting tables, assembly lines, and inspection benches where a non-marring, easy-to-read scale is needed for layout and verification work. Request a quote today to access export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The SK CB-15KD Right Angle is a standard gauge designed to verify and measure precise 90-degree angles in workpieces and assemblies, sourced direct from Korea. Right angle gauges like this are commonly used by machinists, toolmakers, and quality control inspectors to confirm squareness during fabrication, setup, and inspection processes. Request a quote today for export-ready supply of the SK CB-15KD at competitive pricing through a KITA-registered Korean exporter.

The SK CG-100S Snap Gauge is a precision dimensional measuring tool designed for fast, reliable go/no-go inspection of machined parts, sourced direct from Korea. Snap gauges of this type are widely used on production lines and in quality control departments to verify shaft diameters, turned components, and other external dimensions without the need for complex setup. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

SK CGTPG-710A Taper Gauge is a precision hand tool designed for measuring tapered openings, slots, and gaps, sourced direct from Korea. Taper gauges are commonly used in metalworking, fabrication, and maintenance environments to quickly determine the width of a gap or the taper of a bore without the need for additional calculation. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The SK CM-10KD Right Angle is a standard gauge used to verify precise 90-degree angles in workpieces and assemblies, sourced direct from Korea. Right angle gauges like this are commonly used in machining, fabrication, and quality control workflows where squareness between surfaces must be confirmed before or after processing. Request a quote today to access export-ready supply, competitive pricing, and the reliability of working with a KITA-registered Korean exporter.

The SK CM-CKD Crack Gauge is a precision inspection tool designed to measure and monitor surface crack width, sourced direct from Korea. Crack gauges of this type are commonly used in structural inspection, civil engineering, and building maintenance to track crack progression in concrete, masonry, and other surfaces over time. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The SK CMG-10 Chamfer Measurement Gauge is a precision inspection tool designed to accurately measure chamfer dimensions on machined parts, sourced direct from Korea. Chamfer gauges like this are commonly used in metal fabrication, machining, and quality control environments where verifying the angle and depth of beveled edges is critical to part conformance. Request a quote today to access export-ready stock, competitive Korean factory pricing, and the reliability of supply through a KITA-registered exporter.