Pneumatics & Hydraulics

The UDT UCR-205 Air Gun Cordless Riveter is a cordless riveting tool designed for fast, efficient blind rivet installation, sourced direct from Korea. Cordless riveters like this are widely used in sheet metal fabrication, automotive assembly, and structural installation work where mobility and consistent pull force are essential. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

UDT UD Shinsung Die (Circular) is a circular die tool designed for forming and threading operations, sourced direct from Korea. Circular dies of this type are commonly used in hydraulic construction and fabrication workflows where consistent thread cutting or profile forming on rod and pipe stock is required. Request a quote today to secure export-ready supply of this tool through ProSource MRO, a KITA-registered Korean exporter offering competitive pricing for industrial buyers worldwide.

The UDT UD-005A Air Nipper is a pneumatic cutting tool designed for fast, precise trimming and clipping tasks, sourced direct from Korea. Air nippers are commonly used in electronics assembly, plastic injection molding, and light manufacturing lines to cut wire leads, sprues, and plastic gates with minimal operator fatigue. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT UD-030I Air Gun Air Crimper is a pneumatic crimping tool designed to deliver fast, consistent terminal and connector crimps, sourced direct from Korea. Air crimpers of this type are commonly used in electrical assembly, wire harness production, and panel wiring operations where repetitive hand crimping would slow output or cause operator fatigue. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The UDT UD-08A is a hydraulic electric pump designed to deliver controlled hydraulic pressure for powering construction tools and hydraulic equipment, sourced direct from Korea. Hydraulic electric pumps of this type are commonly used on construction sites and in industrial maintenance operations where consistent fluid power output is needed to drive cylinders, presses, or hydraulic hand tools. Request a quote today to access export-ready stock, competitive pricing, and reliable supply through a KITA-registered Korean exporter.

The UDT UD-0S Air Chipping Hammer is a pneumatic impact tool designed for chipping, scaling, and surface preparation work, sourced direct from Korea. Air chipping hammers of this type are commonly used in metalworking, construction, and foundry environments to remove slag, rust, scale, or unwanted material from hard surfaces. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT UD-102 Fin Components Blade is a replacement blade set for pneumatic air tools, sourced direct from Korea. Fin blades are consumable cutting or scraping elements used within air-powered rotary or reciprocating tools, making them essential maintenance stock for facilities running continuous pneumatic operations. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT UD-102 Fin Components Cylinder is a pneumatic cylinder component designed to deliver controlled linear motion in compressed-air systems, sourced direct from Korea. Fin-style cylinder components like this are commonly integrated into automated assembly lines, clamping fixtures, and material handling equipment where compact actuation and reliable stroke performance are essential. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The UDT UD-1033A Air Ratchet Wrench is a pneumatic ratcheting tool designed for efficient fastener driving and removal in tight spaces, sourced direct from Korea. Air ratchet wrenches like this are commonly used in automotive workshops, assembly lines, and maintenance bays where rapid nut and bolt work is needed without the swing clearance required by standard ratchets. Request a quote today for export-ready supply of the UDT UD-1033A at competitive pricing through a KITA-registered Korean exporter.

The UDT UD-1038 Air Belt Sander is a pneumatic abrasive tool designed for continuous belt sanding operations, sourced direct from Korea. Air belt sanders of this type are commonly used in metal fabrication, woodworking, and finishing applications where fast, consistent material removal across flat or contoured surfaces is required. Request a quote today for export-ready supply of UDT air tools at competitive pricing through a KITA-registered Korean exporter.

The UDT UD-1042 Air Components Piston is a precision internal replacement part for pneumatic tool assemblies, sourced direct from Korea. Pistons of this type serve as the core reciprocating element in air-driven tools, making them essential for maintenance teams performing overhauls or repairs on pneumatic equipment across manufacturing and industrial facilities. Request a quote today to access export-ready supply, competitive OEM-grade pricing, and the reliability of a KITA-registered Korean exporter.

The UDT UD-1042 Air Components Throttle Pin is a precision pneumatic control component designed to regulate airflow within air tool assemblies, sourced direct from Korea. Throttle pins of this type are commonly used as replacement or maintenance parts in pneumatic tools, allowing technicians to restore proper speed and airflow control to grinders, drills, and impact wrenches during overhaul or repair. Request a quote today to access export-ready supply of this air tool component at competitive pricing through a KITA-registered Korean exporter.

The UDT UD-1045 Air Jet Chisel is a pneumatic chiseling tool designed for cutting, scaling, and surface preparation work, sourced direct from Korea. Air chisels like this are commonly used in metalworking, automotive, and construction trades to remove rust, break welds, or chip material from hard surfaces. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT UD-1048 Air Gun Air Jet Chisel is a pneumatic chiseling tool designed for scaling, chipping, and surface preparation work, sourced direct from Korea. Air jet chisels like this are commonly used in metalworking, construction, and maintenance environments where operators need to remove rust, weld slag, gaskets, or hardened material from surfaces efficiently. Request a quote today for export-ready supply through a KITA-registered Korean exporter, with competitive pricing available for both sample and bulk MRO orders.

The UDT UD-1050 Air Components Rotor is a pneumatic rotor assembly designed to deliver consistent rotational output within air-driven tool systems, sourced direct from Korea. Rotor components like this are critical replacement and maintenance parts for air tools used across automotive workshops, manufacturing lines, and general industrial assembly operations where compressed-air systems power everyday tooling. Request a quote today for export-ready supply, competitive pricing, and the reliability of working with a KITA-registered Korean exporter.

The UDT UD-1050 Air Components Throttle Pin is a precision pneumatic control component designed to regulate airflow within air tool assemblies, sourced direct from Korea. Throttle pins of this type are commonly used as internal replacement parts in pneumatic tools, allowing maintenance technicians to restore proper speed and airflow control without replacing the entire tool. Request a quote today for export-ready supply with competitive pricing, fulfilled by a KITA-registered Korean exporter.

The UDT UD-1051 Air Drill is a pneumatic drilling tool powered by compressed air, sourced direct from Korea. Air drills of this type are commonly used in automotive workshops, metal fabrication, and assembly lines where a lightweight, continuous-duty drilling solution is preferred over electric alternatives. Request a quote today for export-ready supply, competitive Korea-direct pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT UD-1054 Air Drill is a pneumatic drilling tool powered by compressed air, sourced direct from Korea. Air drills of this type are commonly used in automotive, fabrication, and assembly environments where consistent rotational power and reduced operator fatigue are priorities over electric alternatives. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The UDT UD-1057 Air Components Blade is a replacement blade designed for use with air-powered cutting tools, sourced direct from Korea. Pneumatic cutting blades like this are commonly used in metal fabrication, sheet cutting, and industrial disassembly work where consistent, high-speed cuts are needed without electrical power. Request a quote today for export-ready supply, competitive OEM and aftermarket pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT UD-1057 Air Components Reverse Lever is a directional control component designed to switch airflow direction in pneumatic tool assemblies, sourced direct from Korea. Reverse levers of this type are commonly used during maintenance or rebuild of air tools, allowing technicians to toggle between forward and reverse operation on equipment such as impact wrenches and air ratchets. Request a quote today to secure export-ready supply of this pneumatic component at competitive pricing through a KITA-registered Korean exporter.