Power Tools

The UDT 594-2154 Construction Suction Screen Set is a filtration accessory designed to protect suction inlets during construction fluid transfer operations, sourced direct from Korea. Suction screens of this type are commonly used on job sites to prevent debris, sediment, and particulate matter from entering pumps or fluid handling equipment during concrete, dewatering, or site drainage work. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The UDT 594-3162 Nylon Cutter is a brush cutter accessory designed to replace traditional metal blades for cutting through grass and light ground cover, sourced direct from Korea. Nylon cutters are commonly used in landscaping, groundskeeping, and agricultural maintenance where a safer, lower-impact cutting option is preferred over rigid steel blades. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

UDT 594-3180 Accessories Power Hoe is a brush cutter attachment designed to convert compatible power units into soil-working tools, sourced direct from Korea. Commonly used in agriculture, landscaping, and small-scale cultivation, this type of hoe attachment allows operators to till, weed, and break up ground without the need for a separate dedicated machine. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT 594-3214 Accessories Bushing is a replacement bushing component designed for brush cutter systems, sourced direct from Korea. Bushings of this type are commonly used to secure or adapt rotating shaft assemblies in brush cutters, helping maintain alignment and reduce wear during heavy-duty vegetation clearing work. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT 594-3223 Throttle Accessory is a replacement throttle component designed for brush cutter applications, sourced direct from Korea. Throttle assemblies like this are essential for maintaining precise engine speed control on brush cutters used in landscaping, agricultural clearing, and vegetation management operations. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

UDT 594-5212 Hoist Lever Block is a manual lifting and load-securing tool sourced direct from Korea. Lever blocks like this are commonly used in construction, shipbuilding, and heavy manufacturing environments to lift, pull, or tension loads in spaces where powered equipment cannot easily reach. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

UDT 594-5328 Accessories Nylon Line is a brush cutter replacement cutting line designed for trimming and clearing vegetation, sourced direct from Korea. Nylon cutting line is a consumable used in string trimmers and brush cutters to cut grass, weeds, and light undergrowth across landscaping, groundskeeping, and agricultural maintenance applications. Request a quote today for export-ready supply of this UDT brush cutter accessory at competitive pricing through a KITA-registered Korean exporter.

The UDT 594-5504 Clamp Cam is a hang clamp designed to secure workpieces firmly in place during fabrication and assembly operations, sourced direct from Korea. Hang clamps of this type are commonly used in welding, metalworking, and fixture setups where a fast, reliable hold is needed without obstructing access to the work surface. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

UDT 594-5531 Clamp Cam is a hang clamp designed for secure workpiece positioning and clamping during fabrication and assembly operations, sourced direct from Korea. Hang clamps of this type are commonly used in metalworking, welding fixtures, and jig setups where reliable holding force and repeatable positioning are essential. Request a quote today to access export-ready supply, competitive pricing, and dependable fulfillment through a KITA-registered Korean exporter.

The UDT 594-5586 Clamp Cam is a hang clamp designed to secure workpieces firmly in place during fabrication and assembly operations, sourced direct from Korea. Hang clamps of this type are commonly used in welding fixtures, metalworking setups, and production jigs where consistent clamping force and quick release are essential. Request a quote today for export-ready supply of this UDT clamping solution at competitive pricing, fulfilled by a KITA-registered Korean exporter.

UDT 594-5638 Clamp Pad is a replacement contact pad designed for hang clamp applications, sourced direct from Korea. Clamp pads serve as the gripping interface between the clamp jaw and the workpiece, protecting surfaces from damage and maintaining secure hold during lifting or positioning tasks in fabrication and construction environments. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

UDT 594-5665 Clamp Pad is a replacement contact pad designed for use with hang clamp systems, sourced direct from Korea. Clamp pads provide a protective gripping surface that helps secure workpieces without marring or damaging the material during clamping operations, making them a practical consumable in fabrication, assembly, and metalworking environments. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

UDT 594-5717 Clamp Pad is a replacement contact pad designed for use with hang clamps, sourced direct from Korea. Clamp pads protect workpiece surfaces from marring or slipping during clamping operations, making them a practical consumable for fabrication shops, assembly lines, and maintenance teams working with finished or sensitive materials. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The UDT 594-5762 Clamp Spring is a replacement spring component designed to maintain consistent clamping tension in hang clamp assemblies, sourced direct from Korea. Hang clamp springs are critical consumable parts in suspension and workholding setups, commonly replaced during routine maintenance to restore reliable grip and prevent slippage in production or fabrication environments. Request a quote today for export-ready supply of this UDT replacement part, backed by competitive pricing through a KITA-registered Korean exporter.

The UDT 594-5799 Clamp Spring is a replacement spring component designed to maintain consistent clamping tension in hang clamp assemblies, sourced direct from Korea. Hang clamp springs are critical for ensuring reliable gripping force during overhead or suspended workpiece operations, commonly used in fabrication, welding setups, and assembly line fixtures. Request a quote today for export-ready supply of this UDT component at competitive pricing through a KITA-registered Korean exporter.

The UDT 594-5841 Clamp Spring is a replacement tensioning component for hang clamp assemblies, sourced direct from Korea. Clamp springs maintain consistent holding force in suspended workpiece setups, making them a practical maintenance part for fabrication shops and assembly lines that rely on overhead clamping fixtures. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

UDT 594-5902 Compact Chain Block is a manual lifting hoist designed for controlled, precise load handling, sourced direct from Korea. Compact chain blocks like this are widely used in workshops, construction sites, and maintenance environments where overhead lifting in tight spaces is required. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

UDT 594-6345 Wheel Cushion Pad is a protective accessory designed to provide buffering and support between wheel components during power tool operation, sourced direct from Korea. Cushion pads of this type are commonly used in grinding and cutting applications to reduce vibration transmission, protect wheel integrity, and extend the working life of both the wheel and the tool. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The UDT 594-6381 Wheel Backup Pad is a power tool accessory designed to support and secure abrasive discs during grinding and finishing operations, sourced direct from Korea. Backup pads of this type are commonly used with angle grinders and die grinders across metalworking, fabrication, and surface preparation tasks, providing a stable mounting surface that helps maintain consistent disc contact. Request a quote today for export-ready supply at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The UDT 594-6442 Wheel Circular Sanding Pad is a rotary sanding accessory designed to deliver consistent surface finishing when paired with compatible power tools, sourced direct from Korea. Circular sanding pads of this type are commonly used in metalworking, woodworking, and fabrication environments where uniform material removal and surface preparation are essential across flat or contoured workpieces. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.