Rulers & Levels

BlueTec BT-OS100 Compass Outside Calipers are a hand-held measurement tool designed to transfer and compare external dimensions on workpieces, sourced direct from Korea. Machinists, toolmakers, and fabricators rely on outside calipers like these to gauge the outer diameter of round stock, pipes, and turned parts where a direct reading instrument may not be practical. Request a quote today for export-ready supply through a KITA-registered Korean exporter, with competitive pricing available for both sample and bulk orders.

The BlueTec BT-SD100 Compass Divider is a precision scribing and layout tool used for marking, transferring measurements, and stepping off equal divisions, sourced direct from Korea. Compass dividers are a staple in metalworking, fabrication, and technical drafting environments where accurate layout lines and circle scribing are required on flat or curved surfaces. Request a quote today to secure export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The BlueTec BT-WD100 Compass Divider (Wing Type) is a precision wing-style divider designed for accurate scribing, spacing, and layout marking, sourced direct from Korea. Compass dividers of this type are commonly used by machinists, fabricators, and toolmakers to transfer measurements, scribe circles, and mark consistent intervals on metal, wood, or composite workpieces. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

BlueTec BT113-600 Caliper Straight Edge (I-Beam Type) is a rigid precision measuring tool designed for layout, inspection, and surface reference work, sourced direct from Korea. The I-beam cross-section provides enhanced stiffness along the full length, making it well suited for machinists, toolmakers, and quality control technicians who need a reliable straight reference edge on flat surfaces or workpieces. Request a quote today for export-ready supply, competitive wholesale pricing, and dependable fulfillment through a KITA-registered Korean exporter.

The BlueTec BT114-80 Caliper Straight Edge (Blade Type) is a precision blade-style straight edge designed for accurate linear measurement and surface alignment checks, sourced direct from Korea. Machinists, toolmakers, and quality control technicians rely on blade-type straight edges to verify flatness, scribe layout lines, and check the straightness of machined surfaces across a wide range of fabrication and inspection tasks. Request a quote today to access export-ready supply, competitive pricing, and the reliability of a KITA-registered Korean exporter.

The BlueTec BT200-300B is a black-painted steel ruler right angle square designed for precise 90-degree layout and marking tasks, sourced direct from Korea. Machinists, woodworkers, and fabricators rely on try squares like this to verify perpendicularity, scribe accurate reference lines, and check the squareness of workpieces during assembly or cutting operations. Request a quote today for export-ready supply with competitive pricing through a KITA-registered Korean exporter.

The BlueTec P-150 Steel Ruler is a precision measuring tool designed for accurate linear measurement, sourced direct from Korea. Steel rulers are a workshop staple used by machinists, fabricators, and tradespeople for marking, scribing, and referencing dimensions across metal, wood, and other materials. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

FSK AL-1 Compact Level is a small-format leveling tool designed for quick, accurate horizontal and vertical alignment checks, sourced direct from Korea. Compact levels like this are commonly used by contractors, electricians, and millwrights when working in tight spaces where a full-length level would be impractical. Request a quote today for export-ready supply of FSK measuring tools at competitive pricing, fulfilled by a KITA-registered Korean exporter.

FSK FLB1-100 Level is a precision balance level designed for accurate horizontal and vertical alignment checks, sourced direct from Korea. Tradespeople, machinists, and construction crews rely on this type of tool when setting machinery, laying foundations, or ensuring structural components are plumb and level during installation. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The FSK RL-32 Level Gauge (Circular) is a compact circular leveling instrument designed to verify horizontal alignment and surface flatness, sourced direct from Korea. Circular level gauges like this are commonly used by machinists, installers, and maintenance technicians to confirm that machinery bases, mounting surfaces, and precision equipment are properly leveled before operation. Request a quote today for export-ready supply of the FSK RL-32 at competitive pricing through a KITA-registered Korean exporter.

FSK SLB1-100 Precision Square delivers accurate right-angle and flatness measurement for layout and inspection tasks, sourced direct from Korea. Machinists, toolmakers, and quality control technicians rely on precision squares to verify perpendicularity and check workpiece alignment on surface plates and machine setups. Request a quote today for export-ready supply at competitive pricing through ProSource MRO, a KITA-registered Korean exporter.

OBISHI AD-151 Precision Balance Level is a sensitive leveling instrument designed for accurate horizontal and vertical alignment checks, sourced direct from Korea. Precision levels of this type are widely used in machine tool setup, surface plate inspection, and equipment installation where even slight deviations in flatness or tilt must be detected and corrected. Request a quote today for export-ready supply of the OBISHI AD-151 through ProSource MRO, backed by competitive pricing from a KITA-registered Korean exporter.

OBISHI FD-102 Attached Right Angle Ruler is a precision layout and verification tool designed to confirm and mark accurate 90-degree angles, sourced direct from Korea. Machinists, carpenters, and fabricators rely on right angle rulers like this to ensure squareness during assembly, part layout, and structural fitting work. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

SB 19 Protractor is a precision angle-measuring tool designed for accurate layout and inspection work, sourced direct from Korea. Protractors in this category are commonly used by machinists, fabricators, and quality control technicians to measure and transfer angles on workpieces, drawings, and assemblies. Request a quote today to access export-ready supply of this measuring tool at competitive pricing through a KITA-registered Korean exporter.

The SB 700A Taper Gauge is a precision hand measuring tool designed to determine the width of gaps, slots, and openings, sourced direct from Korea. Commonly used in metalworking, fabrication, and quality control environments, taper gauges allow technicians to quickly check clearances and fit tolerances without the need for calipers or feeler gauge sets. Request a quote today for export-ready supply at competitive pricing through a KITA-registered Korean exporter.

The SB AS-127 Right Angle Square (Slide Type) is a precision layout and verification tool designed to check and mark 90-degree angles, sourced direct from Korea. Slide-type right angle squares are widely used in metalworking, woodworking, and fabrication shops to ensure perpendicularity during assembly, machining setups, and structural fitting tasks. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

SB AS-66 Right Angle Square (Slide Type) is a precision layout and verification tool designed for confirming 90-degree angles, sourced direct from Korea. The sliding mechanism allows the reference edge to be repositioned along the blade, making it practical for scribing parallel lines, checking squareness on machined parts, and fitting work in metalworking or woodworking applications. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The SB CNS-300 Combination Square is a versatile layout and measurement tool used for marking, checking squareness, and finding 45-degree angles, sourced direct from Korea. Combination squares are a standard hand tool in metal fabrication, woodworking, and machining shops wherever accurate scribing and right-angle checks are needed at the workbench. Request a quote today for export-ready supply, competitive pricing, and reliable fulfillment through a KITA-registered Korean exporter.

The SB CSRP-3000 Steel Ruler in a gloss finish is a precision measuring hand tool sourced direct from Korea. Steel rulers are a workshop and drafting staple, used by fabricators, machinists, and quality control technicians for straight-line measurement, layout marking, and part inspection across metal, wood, and composite materials. Request a quote today for export-ready supply of the SB CSRP-3000 at competitive pricing, fulfilled by a KITA-registered Korean exporter.

The SB FAR-180 Steel Rule is a precision measuring tool used for linear measurement and layout work, sourced direct from Korea. Steel rules are a workshop staple for machinists, fabricators, and quality control technicians who need quick, reliable straight-edge measurements on flat or curved surfaces. Request a quote today for export-ready supply of the SB FAR-180 at competitive pricing through a KITA-registered Korean exporter.