🔍
Can't find your part? We source far beyond this catalog —
list any MRO part, even if it's not listed here, and we'll quote it direct from Korean makers.
Submit an RFQ →
Sensors
![[OMRON] — WL-N/WLG Spatter-prevention Limit Switch (Sealed Top-roller Plunger)](https://img.prosourcemro.com/2026/05/001-467-300x200.png)
Two-circuit limit switches that can be selected to match the operating environment and application WL-N/Basic models, WLG/High-sensitivity and High-precision models
Two-circuit limit switches that can be selected to match the operating environment and application WL-N/Basic models, WLG/High-sensitivity and High-precision models
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| WLD28-LDS-N | Sealed top-roller plunger Spatter screw LED | OMRON | Type: Two-circuit Limit Switch | Actuator: Sealed top-roller plunger | Terminal: Screw (G1/2) | Pretravel: 1.7mm max. | Indicator: LED | Built-in Switch: Spatter-prevention | |
| WLD28-LES-N | Sealed top-roller plunger Spatter screw Neon | OMRON | Type: Two-circuit Limit Switch | Actuator: Sealed top-roller plunger | Terminal: Screw (G1/2) | Pretravel: 1.7mm max. | Indicator: Neon | Built-in Switch: Spatter-prevention | |
| WLD28-LDS-M1J-1-N | WL Spatter Plunger PWC NO only M12 | OMRON | Type: Two-circuit Limit Switch | Actuator: Sealed top-roller plunger | Terminal: Pre-wired connector M12 | Pretravel: 1.7mm max. | Indicator: LED | Built-in Switch: Spatter-prevention | Wiring: NO only | |
| WLD28-LDS-M1GJ-1-N | WL Spatter Plunger PWC NO only M12 | OMRON | Type: Two-circuit Limit Switch | Actuator: Sealed top-roller plunger | Terminal: Pre-wired connector M12 | Pretravel: 1.7mm max. | Indicator: LED | Built-in Switch: Spatter-prevention | Wiring: NO only | |
| WLD28-LDS-DGJS-N | WL Spatter Plunger PWC NC+NO M12 | OMRON | Type: Two-circuit Limit Switch | Actuator: Sealed top-roller plunger | Terminal: Pre-wired connector M12 | Pretravel: 1.7mm max. | Indicator: LED | Built-in Switch: Spatter-prevention | Wiring: NC+NO | |
| WLD28-LDS-DTGJS-N | WL Spatter Plunger PWC NC+NO Smartclick | OMRON | Type: Two-circuit Limit Switch | Actuator: Sealed top-roller plunger | Terminal: Pre-wired connector Smartclick | Pretravel: 1.7mm max. | Indicator: LED | Built-in Switch: Spatter-prevention | Wiring: NC+NO |
![[OMRON] — XE/XV/XV2 Enclosed Switch (DC, Side/Base/Diagonal mounting, GP+Sealed actuators)](https://img.prosourcemro.com/2026/05/001-479-300x225.png)
Long Service Life and Large Breaking Power
Long Service Life and Large Breaking Power
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| XE-Q-2 | XE Plunger (General-purpose) DC | OMRON | Type: Enclosed Switch | Actuator: Plunger (General-purpose) | Current: DC | Mounting: Side mounting | Approval: --- | |
| XV-Q-2 | XV Plunger (General-purpose) DC | OMRON | Type: Enclosed Switch | Actuator: Plunger (General-purpose) | Current: DC | Mounting: Base mounting | Approval: --- | |
| XV2-Q-2 | XV2 Plunger (General-purpose) DC | OMRON | Type: Enclosed Switch | Actuator: Plunger (General-purpose) | Current: DC | Mounting: Diagonal side mounting | Approval: --- | |
| XE-Q22-2 | XE Roller plunger (General-purpose) DC | OMRON | Type: Enclosed Switch | Actuator: Roller plunger (General-purpose) | Current: DC | Mounting: Side mounting | Approval: --- | |
| XV-Q22-2 | XV Roller plunger (General-purpose) DC | OMRON | Type: Enclosed Switch | Actuator: Roller plunger (General-purpose) | Current: DC | Mounting: Base mounting | Approval: --- | |
| XV2-Q22-2 | XV2 Roller plunger (General-purpose) DC | OMRON | Type: Enclosed Switch | Actuator: Roller plunger (General-purpose) | Current: DC | Mounting: Diagonal side mounting | Approval: --- | |
| XE-Q21-2 | XE Crossroller plunger (General-purpose) DC | OMRON | Type: Enclosed Switch | Actuator: Crossroller plunger (General-purpose) | Current: DC | Mounting: Side mounting | Approval: --- | |
| XV-Q21-2 | XV Crossroller plunger (General-purpose) DC | OMRON | Type: Enclosed Switch | Actuator: Crossroller plunger (General-purpose) | Current: DC | Mounting: Base mounting | Approval: --- | |
| XE-QA2-2 | XE Roller arm lever (General-purpose) DC | OMRON | Type: Enclosed Switch | Actuator: Roller arm lever (General-purpose) | Current: DC | Mounting: Side mounting | Approval: --- | |
| XV-QA2-2 | XV Roller arm lever (General-purpose) DC | OMRON | Type: Enclosed Switch | Actuator: Roller arm lever (General-purpose) | Current: DC | Mounting: Base mounting | Approval: --- | |
| XV2-QA2-2 | XV2 Roller arm lever (General-purpose) DC | OMRON | Type: Enclosed Switch | Actuator: Roller arm lever (General-purpose) | Current: DC | Mounting: Diagonal side mounting | Approval: --- | |
| XE-QA277-2 | XE One-way roller arm lever (General-purpose) DC | OMRON | Type: Enclosed Switch | Actuator: One-way roller arm lever (General-purpose) | Current: DC | Mounting: Side mounting | Approval: --- | |
| XE-N-2 | XE Sealed plunger DC | OMRON | Type: Enclosed Switch | Actuator: Sealed plunger | Current: DC | Mounting: Side mounting | Approval: --- | |
| XV-N-2 | XV Sealed plunger DC | OMRON | Type: Enclosed Switch | Actuator: Sealed plunger | Current: DC | Mounting: Base mounting | Approval: --- | |
| XV2-N-2 | XV2 Sealed plunger DC | OMRON | Type: Enclosed Switch | Actuator: Sealed plunger | Current: DC | Mounting: Diagonal side mounting | Approval: --- | |
| XE-NA2-2 | XE Sealed roller arm lever DC | OMRON | Type: Enclosed Switch | Actuator: Sealed roller arm lever | Current: DC | Mounting: Side mounting | Approval: --- | |
| XV-NA2-2 | XV Sealed roller arm lever DC | OMRON | Type: Enclosed Switch | Actuator: Sealed roller arm lever | Current: DC | Mounting: Base mounting | Approval: --- | |
| XV2-NA2-2 | XV2 Sealed roller arm lever DC | OMRON | Type: Enclosed Switch | Actuator: Sealed roller arm lever | Current: DC | Mounting: Diagonal side mounting | Approval: --- | |
| XE-NA277-2 | XE One-way sealed roller arm lever DC | OMRON | Type: Enclosed Switch | Actuator: One-way sealed roller arm lever | Current: DC | Mounting: Side mounting | Approval: --- | |
| XV2-NA277-2 | XV2 One-way sealed roller arm lever DC | OMRON | Type: Enclosed Switch | Actuator: One-way sealed roller arm lever | Current: DC | Mounting: Diagonal side mounting | Approval: --- |
![[OMRON] — XS Series M12 4-pin Sensor I/O Connector Cable (Single-ended XS2F + Double-ended XS5W Smart Click)](https://img.prosourcemro.com/2026/05/001-4-300x205.png)
OMRON XS series M12 4-pin Sensor I/O connector cables for connecting M12 connector-type OMRON sensors and amplifiers — including E3S-DC color mark photoelectric sensors and other compatible OMRON M12 4-pin sensors. Available in two configurations: XS2F single-ended (connector + flying leads, for direct PLC wiring) and XS5W double-ended smart click (connector both sides, for connection to splitter/junction boxes). Each configuration available in straight or L-shaped (right-angle) connector types and 2m or 5m cable lengths. PVC-jacketed for general industrial use. Pin assignment: Brown (1) +V, White (2) external input or output, Blue (3) 0V, Black (4) C/Q output.
OMRON XS series M12 4-pin Sensor I/O connector cables for connecting M12 connector-type OMRON sensors and amplifiers — including E3S-DC color mark photoelectric sensors and other compatible OMRON M12 4-pin sensors. Available in two configurations: XS2F single-ended (connector + flying leads, for direct PLC wiring) and XS5W double-ended smart click (connector both sides, for connection to splitter/junction boxes). Each configuration available in straight or L-shaped (right-angle) connector types and 2m or 5m cable lengths. PVC-jacketed for general industrial use. Pin assignment: Brown (1) +V, White (2) external input or output, Blue (3) 0V, Black (4) C/Q output.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| XS2F-D421-D80-F | OMRON XS2F-D421-D80-F M12 sensor cable, single-ended, straight, 4-pin, 2m. | OMRON | Connector Size: M12 4-pin | Configuration: Single-ended, straight connector | Cable Length: 2m | Conductors: 4-conductor | Cable Type: Standard PVC-jacketed | Pin 1 (Brown): +V Power supply | Pin 2 (White): External input or output (depending on sensor) | Pin 3 (Blue): 0V | Pin 4 (Black): C/Q output signal | Compatible With: OMRON E3S-DC color mark sensors and other M12 4-pin sensors | |
| XS2F-D421-G80-F | OMRON XS2F-D421-G80-F M12 sensor cable, single-ended, straight, 4-pin, 5m. | OMRON | Connector Size: M12 4-pin | Configuration: Single-ended, straight connector | Cable Length: 5m | Conductors: 4-conductor | Cable Type: Standard PVC-jacketed | Pin 1 (Brown): +V Power supply | Pin 2 (White): External input or output (depending on sensor) | Pin 3 (Blue): 0V | Pin 4 (Black): C/Q output signal | Compatible With: OMRON E3S-DC color mark sensors and other M12 4-pin sensors | |
| XS2F-D422-D80-F | OMRON XS2F-D422-D80-F M12 sensor cable, single-ended, L-shaped, 4-pin, 2m. | OMRON | Connector Size: M12 4-pin | Configuration: Single-ended, L-shaped (right-angle) connector | Cable Length: 2m | Conductors: 4-conductor | Cable Type: Standard PVC-jacketed | Pin 1 (Brown): +V Power supply | Pin 2 (White): External input or output (depending on sensor) | Pin 3 (Blue): 0V | Pin 4 (Black): C/Q output signal | Compatible With: OMRON E3S-DC color mark sensors and other M12 4-pin sensors | |
| XS2F-D422-G80-F | OMRON XS2F-D422-G80-F M12 sensor cable, single-ended, L-shaped, 4-pin, 5m. | OMRON | Connector Size: M12 4-pin | Configuration: Single-ended, L-shaped (right-angle) connector | Cable Length: 5m | Conductors: 4-conductor | Cable Type: Standard PVC-jacketed | Pin 1 (Brown): +V Power supply | Pin 2 (White): External input or output (depending on sensor) | Pin 3 (Blue): 0V | Pin 4 (Black): C/Q output signal | Compatible With: OMRON E3S-DC color mark sensors and other M12 4-pin sensors | |
| XS5W-D421-D81-F | OMRON XS5W-D421-D81-F M12 sensor cable, double-ended smart click, straight/straight, 4-pin, 2m. | OMRON | Connector Size: M12 4-pin | Configuration: Double-ended smart click, straight/straight | Cable Length: 2m | Conductors: 4-conductor | Cable Type: Standard PVC-jacketed | Pin 1 (Brown): +V Power supply | Pin 2 (White): External input or output (depending on sensor) | Pin 3 (Blue): 0V | Pin 4 (Black): C/Q output signal | Compatible With: OMRON E3S-DC color mark sensors and other M12 4-pin sensors | |
| XS5W-D421-G81-F | OMRON XS5W-D421-G81-F M12 sensor cable, double-ended smart click, straight/straight, 4-pin, 5m. | OMRON | Connector Size: M12 4-pin | Configuration: Double-ended smart click, straight/straight | Cable Length: 5m | Conductors: 4-conductor | Cable Type: Standard PVC-jacketed | Pin 1 (Brown): +V Power supply | Pin 2 (White): External input or output (depending on sensor) | Pin 3 (Blue): 0V | Pin 4 (Black): C/Q output signal | Compatible With: OMRON E3S-DC color mark sensors and other M12 4-pin sensors | |
| XS5W-D422-D81-F | OMRON XS5W-D422-D81-F M12 sensor cable, double-ended smart click, L-shaped/L-shaped, 4-pin, 2m. | OMRON | Connector Size: M12 4-pin | Configuration: Double-ended smart click, L-shaped/L-shaped | Cable Length: 2m | Conductors: 4-conductor | Cable Type: Standard PVC-jacketed | Pin 1 (Brown): +V Power supply | Pin 2 (White): External input or output (depending on sensor) | Pin 3 (Blue): 0V | Pin 4 (Black): C/Q output signal | Compatible With: OMRON E3S-DC color mark sensors and other M12 4-pin sensors | |
| XS5W-D422-G81-F | OMRON XS5W-D422-D81-F M12 sensor cable, double-ended smart click, L-shaped/L-shaped, 4-pin, 5m. | OMRON | Connector Size: M12 4-pin | Configuration: Double-ended smart click, L-shaped/L-shaped | Cable Length: 5m | Conductors: 4-conductor | Cable Type: Standard PVC-jacketed | Pin 1 (Brown): +V Power supply | Pin 2 (White): External input or output (depending on sensor) | Pin 3 (Blue): 0V | Pin 4 (Black): C/Q output signal | Compatible With: OMRON E3S-DC color mark sensors and other M12 4-pin sensors |
![[OMRON] — ZC-[]55 Small High-precision Enclosed Switch (Base, 12 Actuators, UL/CSA/EN)](https://img.prosourcemro.com/2026/05/001-476-300x300.png)
Small, High-precision Enclosed Switch
Small, High-precision Enclosed Switch
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZC-D55 | ZC-[]55 Plunger | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Plunger | Terminal: Screw terminal | Approval: UL, CSA, EN | |
| ZC-Q55 | ZC-[]55 Panel mount plunger | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount plunger | Terminal: Screw terminal | Approval: UL, CSA, EN | |
| ZC-Q2255 | ZC-[]55 Panel mount roller plunger | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount roller plunger | Terminal: Screw terminal | Approval: UL, CSA, EN | |
| ZC-Q2155 | ZC-[]55 Panel mount crossroller plunger | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount crossroller plunger | Terminal: Screw terminal | Approval: UL, CSA, EN | |
| ZC-N2255 | ZC-[]55 Sealed roller plunger | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed roller plunger | Terminal: Screw terminal | Approval: UL, CSA, EN | |
| ZC-N2155 | ZC-[]55 Sealed crossroller plunger | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed crossroller plunger | Terminal: Screw terminal | Approval: UL, CSA, EN | |
| ZC-W55 | ZC-[]55 Short hinge lever | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Short hinge lever | Terminal: Screw terminal | Approval: UL, CSA, EN | |
| ZC-W155 | ZC-[]55 Hinge lever | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Hinge lever | Terminal: Screw terminal | Approval: UL, CSA, EN | |
| ZC-W255 | ZC-[]55 Short hinge roller lever | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Short hinge roller lever | Terminal: Screw terminal | Approval: UL, CSA, EN | |
| ZC-W2155 | ZC-[]55 Hinge roller lever | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Hinge roller lever | Terminal: Screw terminal | Approval: UL, CSA, EN | |
| ZC-W355 | ZC-[]55 One-way action short hinge roller lever | OMRON | Type: Small High-precision Enclosed Switch | Actuator: One-way action short hinge roller lever | Terminal: Screw terminal | Approval: UL, CSA, EN | |
| ZC-W3155 | ZC-[]55 One-way action hinge roller lever | OMRON | Type: Small High-precision Enclosed Switch | Actuator: One-way action hinge roller lever | Terminal: Screw terminal | Approval: UL, CSA, EN |
Small, High-precision Enclosed Switch
Small, High-precision Enclosed Switch
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZC-D55-L | ZC Ind Plunger AC 90~250VAC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Plunger | Indicator: Operation indicator (AC) | Voltage: 90~250VAC | Note: AC indicator; transparent cover; 90~250VAC | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-D55-L4 | ZC Ind Plunger DC 24VDC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Plunger | Indicator: Operation indicator (DC) | Voltage: 24VDC | Note: LED indicator; no protective structure; operates on AC or DC (reversible polarity) | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-Q55-L | ZC Ind Panel mount plunger AC 90~250VAC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount plunger | Indicator: Operation indicator (AC) | Voltage: 90~250VAC | Note: AC indicator; transparent cover; 90~250VAC | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-Q55-L4 | ZC Ind Panel mount plunger DC 24VDC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount plunger | Indicator: Operation indicator (DC) | Voltage: 24VDC | Note: LED indicator; no protective structure; operates on AC or DC (reversible polarity) | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-Q2255-L | ZC Ind Panel mount roller plunger AC 90~250VAC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount roller plunger | Indicator: Operation indicator (AC) | Voltage: 90~250VAC | Note: AC indicator; transparent cover; 90~250VAC | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-Q2255-L2 | ZC Ind Panel mount roller plunger DC 12VDC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount roller plunger | Indicator: Operation indicator (DC) | Voltage: 12VDC | Note: LED indicator; no protective structure; operates on AC or DC (reversible polarity) | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-Q2255-L4 | ZC Ind Panel mount roller plunger DC 24VDC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount roller plunger | Indicator: Operation indicator (DC) | Voltage: 24VDC | Note: LED indicator; no protective structure; operates on AC or DC (reversible polarity) | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-Q2155-L | ZC Ind Panel mount crossroller plunger AC 90~250VAC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount crossroller plunger | Indicator: Operation indicator (AC) | Voltage: 90~250VAC | Note: AC indicator; transparent cover; 90~250VAC | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-Q2155-L4 | ZC Ind Panel mount crossroller plunger DC 24VDC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount crossroller plunger | Indicator: Operation indicator (DC) | Voltage: 24VDC | Note: LED indicator; no protective structure; operates on AC or DC (reversible polarity) | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-N2255-L | ZC Ind Sealed roller plunger AC 90~250VAC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed roller plunger | Indicator: Operation indicator (AC) | Voltage: 90~250VAC | Note: AC indicator; transparent cover; 90~250VAC | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-N2255-L2 | ZC Ind Sealed roller plunger DC 12VDC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed roller plunger | Indicator: Operation indicator (DC) | Voltage: 12VDC | Note: LED indicator; no protective structure; operates on AC or DC (reversible polarity) | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-N2255-L4 | ZC Ind Sealed roller plunger DC 24VDC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed roller plunger | Indicator: Operation indicator (DC) | Voltage: 24VDC | Note: LED indicator; no protective structure; operates on AC or DC (reversible polarity) | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-N2155-L | ZC Ind Sealed crossroller plunger AC 90~250VAC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed crossroller plunger | Indicator: Operation indicator (AC) | Voltage: 90~250VAC | Note: AC indicator; transparent cover; 90~250VAC | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-N2155-L2 | ZC Ind Sealed crossroller plunger DC 12VDC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed crossroller plunger | Indicator: Operation indicator (DC) | Voltage: 12VDC | Note: LED indicator; no protective structure; operates on AC or DC (reversible polarity) | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-N2155-L4 | ZC Ind Sealed crossroller plunger DC 24VDC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed crossroller plunger | Indicator: Operation indicator (DC) | Voltage: 24VDC | Note: LED indicator; no protective structure; operates on AC or DC (reversible polarity) | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-W155-L | ZC Ind Hinge lever AC 90~250VAC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Hinge lever | Indicator: Operation indicator (AC) | Voltage: 90~250VAC | Note: AC indicator; transparent cover; 90~250VAC | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-W155-L4 | ZC Ind Hinge lever DC 24VDC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Hinge lever | Indicator: Operation indicator (DC) | Voltage: 24VDC | Note: LED indicator; no protective structure; operates on AC or DC (reversible polarity) | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-W255-L | ZC Ind Short hinge roller lever AC 90~250VAC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Short hinge roller lever | Indicator: Operation indicator (AC) | Voltage: 90~250VAC | Note: AC indicator; transparent cover; 90~250VAC | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-W255-L4 | ZC Ind Short hinge roller lever DC 24VDC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Short hinge roller lever | Indicator: Operation indicator (DC) | Voltage: 24VDC | Note: LED indicator; no protective structure; operates on AC or DC (reversible polarity) | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-W2155-L | ZC Ind Hinge roller lever AC 90~250VAC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Hinge roller lever | Indicator: Operation indicator (AC) | Voltage: 90~250VAC | Note: AC indicator; transparent cover; 90~250VAC | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) | |
| ZC-W2155-L4 | ZC Ind Hinge roller lever DC 24VDC | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Hinge roller lever | Indicator: Operation indicator (DC) | Voltage: 24VDC | Note: LED indicator; no protective structure; operates on AC or DC (reversible polarity) | Approval: Not UL/CSA/EN approved (DC 12/24V not subject to CE) |
Small, High-precision Enclosed Switch
Small, High-precision Enclosed Switch
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZC-D55-ML VCT 1M | ZC Molded Plunger Left 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Left | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-D55-ML VCT 3M | ZC Molded Plunger Left 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Left | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-D55-MR VCT 1M | ZC Molded Plunger Right 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-D55-MR VCT 3M | ZC Molded Plunger Right 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-D55-MD VCT 1M | ZC Molded Plunger Underside 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Underside | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-D55-MD VCT 3M | ZC Molded Plunger Underside 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Underside | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q55-ML VCT 1M | ZC Molded Panel mount plunger Left 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Left | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q55-ML VCT 3M | ZC Molded Panel mount plunger Left 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Left | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q55-MR VCT 1M | ZC Molded Panel mount plunger Right 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q55-MR VCT 3M | ZC Molded Panel mount plunger Right 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q55-MD VCT 1M | ZC Molded Panel mount plunger Underside 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Underside | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q2255-ML VCT 1M | ZC Molded Panel mount roller plunger Left 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount roller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Left | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q2255-ML VCT 3M | ZC Molded Panel mount roller plunger Left 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount roller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Left | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q2255-MR VCT 1M | ZC Molded Panel mount roller plunger Right 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount roller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q2255-MR VCT 3M | ZC Molded Panel mount roller plunger Right 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount roller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q2255-MD VCT 1M | ZC Molded Panel mount roller plunger Underside 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount roller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Underside | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q2255-MD VCT 3M | ZC Molded Panel mount roller plunger Underside 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount roller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Underside | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q2155-ML VCT 1M | ZC Molded Panel mount crossroller plunger Left 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount crossroller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Left | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q2155-MR VCT 1M | ZC Molded Panel mount crossroller plunger Right 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount crossroller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q2155-MR VCT 3M | ZC Molded Panel mount crossroller plunger Right 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount crossroller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q2155-MD VCT 1M | ZC Molded Panel mount crossroller plunger Underside 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount crossroller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Underside | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-Q2155-MD VCT 3M | ZC Molded Panel mount crossroller plunger Underside 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Panel mount crossroller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Underside | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-N2255-ML VCT 1M | ZC Molded Sealed roller plunger Left 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed roller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Left | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-N2255-ML VCT 3M | ZC Molded Sealed roller plunger Left 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed roller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Left | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-N2255-MR VCT 1M | ZC Molded Sealed roller plunger Right 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed roller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-N2255-MR VCT 3M | ZC Molded Sealed roller plunger Right 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed roller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-N2255-MD VCT 1M | ZC Molded Sealed roller plunger Underside 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed roller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Underside | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-N2255-MD VCT 3M | ZC Molded Sealed roller plunger Underside 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed roller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Underside | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-N2155-MR VCT 1M | ZC Molded Sealed crossroller plunger Right 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed crossroller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-N2155-MR VCT 3M | ZC Molded Sealed crossroller plunger Right 3M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed crossroller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 3 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-N2155-MD VCT 1M | ZC Molded Sealed crossroller plunger Underside 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Sealed crossroller plunger | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Underside | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-W55-MR VCT 1M | ZC Molded Short hinge lever Right 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Short hinge lever | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-W155-ML VCT 1M | ZC Molded Hinge lever Left 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Hinge lever | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Left | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-W155-MR VCT 1M | ZC Molded Hinge lever Right 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Hinge lever | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-W155-MD VCT 1M | ZC Molded Hinge lever Underside 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Hinge lever | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Underside | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-W255-ML VCT 1M | ZC Molded Short hinge roller lever Left 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Short hinge roller lever | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Left | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-W255-MR VCT 1M | ZC Molded Short hinge roller lever Right 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Short hinge roller lever | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-W255-MD VCT 1M | ZC Molded Short hinge roller lever Underside 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Short hinge roller lever | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Underside | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-W2155-ML VCT 1M | ZC Molded Hinge roller lever Left 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Hinge roller lever | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Left | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-W2155-MR VCT 1M | ZC Molded Hinge roller lever Right 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: Hinge roller lever | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments | |
| ZC-W355-MR VCT 1M | ZC Molded One-way action short hinge roller lever Right 1M | OMRON | Type: Small High-precision Enclosed Switch | Actuator: One-way action short hinge roller lever | Terminal: Molded terminal w/cable (VCT) | Lead Outlet: Right | Cable Length: 1 m | Note: Not approved by UL/CSA/EN; recommended for dusty/oily/humid environments |
Long Service Life and Large Breaking Power
Long Service Life and Large Breaking Power
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZE-Q-2 | ZE Plunger (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: Plunger (General-purpose) | Current: AC | Mounting: Side mounting | Approval: UL, CSA | |
| ZV-Q-2 | ZV Plunger (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: Plunger (General-purpose) | Current: AC | Mounting: Base mounting | Approval: UL, CSA | |
| ZV2-Q-2 | ZV2 Plunger (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: Plunger (General-purpose) | Current: AC | Mounting: Diagonal side mounting | Approval: UL, CSA | |
| ZE-Q22-2 | ZE Roller plunger (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: Roller plunger (General-purpose) | Current: AC | Mounting: Side mounting | Approval: UL, CSA | |
| ZV-Q22-2 | ZV Roller plunger (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: Roller plunger (General-purpose) | Current: AC | Mounting: Base mounting | Approval: UL, CSA | |
| ZV2-Q22-2 | ZV2 Roller plunger (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: Roller plunger (General-purpose) | Current: AC | Mounting: Diagonal side mounting | Approval: UL, CSA | |
| ZE-Q21-2 | ZE Crossroller plunger (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: Crossroller plunger (General-purpose) | Current: AC | Mounting: Side mounting | Approval: UL, CSA | |
| ZV-Q21-2 | ZV Crossroller plunger (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: Crossroller plunger (General-purpose) | Current: AC | Mounting: Base mounting | Approval: UL, CSA | |
| ZV2-Q21-2 | ZV2 Crossroller plunger (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: Crossroller plunger (General-purpose) | Current: AC | Mounting: Diagonal side mounting | Approval: UL, CSA | |
| ZE-QA2-2 | ZE Roller arm lever (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: Roller arm lever (General-purpose) | Current: AC | Mounting: Side mounting | Approval: UL, CSA | |
| ZV-QA2-2 | ZV Roller arm lever (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: Roller arm lever (General-purpose) | Current: AC | Mounting: Base mounting | Approval: UL, CSA | |
| ZV2-QA2-2 | ZV2 Roller arm lever (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: Roller arm lever (General-purpose) | Current: AC | Mounting: Diagonal side mounting | Approval: UL, CSA | |
| ZE-QA277-2 | ZE One-way roller arm lever (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: One-way roller arm lever (General-purpose) | Current: AC | Mounting: Side mounting | Approval: UL, CSA | |
| ZV2-QA277-2 | ZV2 One-way roller arm lever (General-purpose) AC | OMRON | Type: Enclosed Switch | Actuator: One-way roller arm lever (General-purpose) | Current: AC | Mounting: Diagonal side mounting | Approval: UL, CSA | |
| ZE-N-2 | ZE Sealed plunger AC | OMRON | Type: Enclosed Switch | Actuator: Sealed plunger | Current: AC | Mounting: Side mounting | Approval: UL, CSA | |
| ZV-N-2 | ZV Sealed plunger AC | OMRON | Type: Enclosed Switch | Actuator: Sealed plunger | Current: AC | Mounting: Base mounting | Approval: UL, CSA | |
| ZV2-N-2 | ZV2 Sealed plunger AC | OMRON | Type: Enclosed Switch | Actuator: Sealed plunger | Current: AC | Mounting: Diagonal side mounting | Approval: UL, CSA | |
| ZE-N22-2 | ZE Sealed roller plunger AC | OMRON | Type: Enclosed Switch | Actuator: Sealed roller plunger | Current: AC | Mounting: Side mounting | Approval: UL, CSA | |
| ZV-N22-2 | ZV Sealed roller plunger AC | OMRON | Type: Enclosed Switch | Actuator: Sealed roller plunger | Current: AC | Mounting: Base mounting | Approval: UL, CSA | |
| ZV2-N22-2 | ZV2 Sealed roller plunger AC | OMRON | Type: Enclosed Switch | Actuator: Sealed roller plunger | Current: AC | Mounting: Diagonal side mounting | Approval: UL, CSA | |
| ZE-N21-2 | ZE Sealed crossroller plunger AC | OMRON | Type: Enclosed Switch | Actuator: Sealed crossroller plunger | Current: AC | Mounting: Side mounting | Approval: UL, CSA | |
| ZV-N21-2 | ZV Sealed crossroller plunger AC | OMRON | Type: Enclosed Switch | Actuator: Sealed crossroller plunger | Current: AC | Mounting: Base mounting | Approval: UL, CSA | |
| ZV2-N21-2 | ZV2 Sealed crossroller plunger AC | OMRON | Type: Enclosed Switch | Actuator: Sealed crossroller plunger | Current: AC | Mounting: Diagonal side mounting | Approval: UL, CSA | |
| ZE-NA2-2 | ZE Sealed roller arm lever AC | OMRON | Type: Enclosed Switch | Actuator: Sealed roller arm lever | Current: AC | Mounting: Side mounting | Approval: UL, CSA | |
| ZV-NA2-2 | ZV Sealed roller arm lever AC | OMRON | Type: Enclosed Switch | Actuator: Sealed roller arm lever | Current: AC | Mounting: Base mounting | Approval: UL, CSA | |
| ZV2-NA2-2 | ZV2 Sealed roller arm lever AC | OMRON | Type: Enclosed Switch | Actuator: Sealed roller arm lever | Current: AC | Mounting: Diagonal side mounting | Approval: UL, CSA | |
| ZE-NA277-2 | ZE One-way sealed roller arm lever AC | OMRON | Type: Enclosed Switch | Actuator: One-way sealed roller arm lever | Current: AC | Mounting: Side mounting | Approval: UL, CSA | |
| ZV-NA277-2 | ZV One-way sealed roller arm lever AC | OMRON | Type: Enclosed Switch | Actuator: One-way sealed roller arm lever | Current: AC | Mounting: Base mounting | Approval: UL, CSA | |
| ZV2-NA277-2 | ZV2 One-way sealed roller arm lever AC | OMRON | Type: Enclosed Switch | Actuator: One-way sealed roller arm lever | Current: AC | Mounting: Diagonal side mounting | Approval: UL, CSA |
![[OMRON] — ZG2 2D Laser Profile Measurement Sensor Head (3mm/8mm/22mm/70mm Width)](https://img.prosourcemro.com/2026/05/001-363-300x225.png)
OMRON ZG2 Series 2D laser profile measurement sensor heads. 631-pixel resolution. ZG2-WDS3VT: Regular reflective, 3mm width, 0.25μm height res. ZG2-WDS8T: Diffuse reflective, 8mm width, 1μm height res. ZG2-WDS22: 22mm width, 2.5μm height res. ZG2-WDS70: 70mm width, 6μm height res. Cable 2m and 0.5m. Requires ZG2-WDC controller.
OMRON ZG2 Series 2D laser profile measurement sensor heads. 631-pixel resolution. ZG2-WDS3VT: Regular reflective, 3mm width, 0.25μm height res. ZG2-WDS8T: Diffuse reflective, 8mm width, 1μm height res. ZG2-WDS22: 22mm width, 2.5μm height res. ZG2-WDS70: 70mm width, 6μm height res. Cable 2m and 0.5m. Requires ZG2-WDC controller.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZG2-WDS3VT 2M | ZG2 2D sensor head Regular reflective 22.3±0.5 mm H / 3 mm W 2m | OMRON | Sensing Method: 2D Laser Profile Measurement | Optical System: Regular reflective | Measurement Range: 22.3±0.5 mm H / 3 mm W | Resolution: 0.25 μm H / 5 μm W (3mm/631px) | Beam Shape: Line beam | Required Controller: ZG2-WDC11A/41A or ZG2-WDC11/41 controller required | Cable Length: 2 m | |
| ZG2-WDS3VT 0.5M | ZG2 2D sensor head Regular reflective 22.3±0.5 mm H / 3 mm W 0.5m | OMRON | Sensing Method: 2D Laser Profile Measurement | Optical System: Regular reflective | Measurement Range: 22.3±0.5 mm H / 3 mm W | Resolution: 0.25 μm H / 5 μm W (3mm/631px) | Beam Shape: Line beam | Required Controller: ZG2-WDC11A/41A or ZG2-WDC11/41 controller required | Cable Length: 0.5 m | |
| ZG2-WDS8T 2M | ZG2 2D sensor head Diffuse reflective 10.6±0.4 mm H / 8 mm W 2m | OMRON | Sensing Method: 2D Laser Profile Measurement | Optical System: Diffuse reflective | Measurement Range: 10.6±0.4 mm H / 8 mm W | Resolution: 1 μm H / 13 μm W (8mm/631px) | Beam Shape: Line beam | Required Controller: ZG2-WDC11A/41A or ZG2-WDC11/41 controller required | Cable Length: 2 m | |
| ZG2-WDS8T 0.5M | ZG2 2D sensor head Diffuse reflective 10.6±0.4 mm H / 8 mm W 0.5m | OMRON | Sensing Method: 2D Laser Profile Measurement | Optical System: Diffuse reflective | Measurement Range: 10.6±0.4 mm H / 8 mm W | Resolution: 1 μm H / 13 μm W (8mm/631px) | Beam Shape: Line beam | Required Controller: ZG2-WDC11A/41A or ZG2-WDC11/41 controller required | Cable Length: 0.5 m | |
| ZG2-WDS22 2M | ZG2 2D sensor head Diffuse reflective 50±3 mm H / 22 mm W 2m | OMRON | Sensing Method: 2D Laser Profile Measurement | Optical System: Diffuse reflective | Measurement Range: 50±3 mm H / 22 mm W | Resolution: 2.5 μm H / 35 μm W (22mm/631px) | Beam Shape: Line beam | Required Controller: ZG2-WDC11A/41A or ZG2-WDC11/41 controller required | Cable Length: 2 m | |
| ZG2-WDS22 0.5M | ZG2 2D sensor head Diffuse reflective 50±3 mm H / 22 mm W 0.5m | OMRON | Sensing Method: 2D Laser Profile Measurement | Optical System: Diffuse reflective | Measurement Range: 50±3 mm H / 22 mm W | Resolution: 2.5 μm H / 35 μm W (22mm/631px) | Beam Shape: Line beam | Required Controller: ZG2-WDC11A/41A or ZG2-WDC11/41 controller required | Cable Length: 0.5 m | |
| ZG2-WDS70 2M | ZG2 2D sensor head Diffuse reflective 100±12 mm H / 70 mm W 2m | OMRON | Sensing Method: 2D Laser Profile Measurement | Optical System: Diffuse reflective | Measurement Range: 100±12 mm H / 70 mm W | Resolution: 6 μm H / 111 μm W (70mm/631px) | Beam Shape: Line beam | Required Controller: ZG2-WDC11A/41A or ZG2-WDC11/41 controller required | Cable Length: 2 m | |
| ZG2-WDS70 0.5M | ZG2 2D sensor head Diffuse reflective 100±12 mm H / 70 mm W 0.5m | OMRON | Sensing Method: 2D Laser Profile Measurement | Optical System: Diffuse reflective | Measurement Range: 100±12 mm H / 70 mm W | Resolution: 6 μm H / 111 μm W (70mm/631px) | Beam Shape: Line beam | Required Controller: ZG2-WDC11A/41A or ZG2-WDC11/41 controller required | Cable Length: 0.5 m |
OMRON ZG2 Series sensor controllers. 24 VDC. ZG2-WDC11A/41A: NPN/PNP with PC setup support software. ZG2-WDC11/41: NPN/PNP without PC software. Extension cables ZG2-XC3CR~25CR, real-time parallel output ZG-RPD11-N/41-N sold separately.
OMRON ZG2 Series sensor controllers. 24 VDC. ZG2-WDC11A/41A: NPN/PNP with PC setup support software. ZG2-WDC11/41: NPN/PNP without PC software. Extension cables ZG2-XC3CR~25CR, real-time parallel output ZG-RPD11-N/41-N sold separately.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZG2-WDC11A | Sensor controller NPN with PC software | OMRON | Type: Sensor Controller | Power Supply: 24 VDC | Output: NPN | PC Software: Setup support software included | Compatible Heads: ZG2-WDS3VT/8T/22/70 | |
| ZG2-WDC11 | Sensor controller NPN without PC software | OMRON | Type: Sensor Controller | Power Supply: 24 VDC | Output: NPN | PC Software: Not included | Compatible Heads: ZG2-WDS3VT/8T/22/70 | |
| ZG2-WDC41A | Sensor controller PNP with PC software | OMRON | Type: Sensor Controller | Power Supply: 24 VDC | Output: PNP | PC Software: Setup support software included | Compatible Heads: ZG2-WDS3VT/8T/22/70 | |
| ZG2-WDC41 | Sensor controller PNP without PC software | OMRON | Type: Sensor Controller | Power Supply: 24 VDC | Output: PNP | PC Software: Not included | Compatible Heads: ZG2-WDS3VT/8T/22/70 |
![[OMRON] — ZP-L Laser Displacement Sensor Amplifier Unit (Master/Slave, NPN/PNP)](https://img.prosourcemro.com/2026/05/001-357-300x225.png)
OMRON ZP-L Series amplifier units. Master units (ZP-L3000/3010/3050/3060): NPN/PNP × with/without analog output. Slave units (ZP-L3500/3510/3550/3560/3590): NPN/PNP × with/without analog output. First unit must be master. Slave units powered from master.
OMRON ZP-L Series amplifier units. Master units (ZP-L3000/3010/3050/3060): NPN/PNP × with/without analog output. Slave units (ZP-L3500/3510/3550/3560/3590): NPN/PNP × with/without analog output. First unit must be master. Slave units powered from master.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZP-L3000 | Master NPN with analog output | OMRON | Type: Master Unit | Analog Output: Yes | Judgment Output: HIGH/PASS/LOW | External Input: Yes (zero reset/LD-off/timing/reset/bank) | IO Type: NPN | Note: First unit must be master; only one master per system | |
| ZP-L3050 | Master PNP with analog output | OMRON | Type: Master Unit | Analog Output: Yes | Judgment Output: HIGH/PASS/LOW | External Input: Yes | IO Type: PNP | Note: First unit must be master; only one master per system | |
| ZP-L3010 | Master NPN without analog output | OMRON | Type: Master Unit | Analog Output: No | Judgment Output: HIGH/PASS/LOW | External Input: Yes | IO Type: NPN | Note: First unit must be master; only one master per system | |
| ZP-L3060 | Master PNP without analog output | OMRON | Type: Master Unit | Analog Output: No | Judgment Output: HIGH/PASS/LOW | External Input: Yes | IO Type: PNP | Note: First unit must be master; only one master per system | |
| ZP-L3500 | Slave NPN with analog output | OMRON | Type: Slave Unit | Analog Output: Yes | Judgment Output: HIGH/PASS/LOW | External Input: Yes | IO Type: NPN | Note: Power supplied from master unit; no separate power connection needed | |
| ZP-L3550 | Slave PNP with analog output | OMRON | Type: Slave Unit | Analog Output: Yes | Judgment Output: HIGH/PASS/LOW | External Input: Yes | IO Type: PNP | Note: Power supplied from master unit | |
| ZP-L3510 | Slave NPN without analog output | OMRON | Type: Slave Unit | Analog Output: No | Judgment Output: HIGH/PASS/LOW | External Input: Yes | IO Type: NPN | Note: Power supplied from master unit | |
| ZP-L3560 | Slave PNP without analog output | OMRON | Type: Slave Unit | Analog Output: No | Judgment Output: HIGH/PASS/LOW | External Input: Yes | IO Type: PNP | Note: Power supplied from master unit | |
| ZP-L3590 | Slave no output | OMRON | Type: Slave Unit | Analog Output: No | Judgment Output: No | External Input: No | IO Type: — | Note: Communication slave only; power supplied from master unit |
OMRON ZP-L Series communication units. ZP-EIP: EtherNet/IP and No-protocol TCP. ZP-RSA: RS-232C. Compatible with PLCs and PCs from different manufacturers. Use with Wave Inspire ZP support software (free download).
OMRON ZP-L Series communication units. ZP-EIP: EtherNet/IP and No-protocol TCP. ZP-RSA: RS-232C. Compatible with PLCs and PCs from different manufacturers. Use with Wave Inspire ZP support software (free download).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZP-EIP | Communication unit EtherNet/IP | OMRON | Type: Communication Unit | Protocol: EtherNet/IP / No-protocol TCP | Compatible Devices: PLCs and PCs from different manufacturers | Note: Use with Wave Inspire ZP support software (free download) | |
| ZP-RSA | Communication unit RS-232C | OMRON | Type: Communication Unit | Protocol: RS-232C | Compatible Devices: PLCs and PCs from different manufacturers | Note: Use with Wave Inspire ZP support software (free download) |
OMRON ZP-L Series laser displacement sensor heads. Diffuse-reflective. Line beam: ZP-LS025L/050L/100L (0.5~1.2μm), ZP-LS300L/600L (4~14μm). Spot beam: ZP-LS025S/050S/100S (0.6~1.3μm), ZP-LS300S/600S (4~14μm). Class 2 laser (Class 1 available with 'C' suffix). Cable 0.2m and 2m. Requires ZP-L amplifier unit (sold separately).
OMRON ZP-L Series laser displacement sensor heads. Diffuse-reflective. Line beam: ZP-LS025L/050L/100L (0.5~1.2μm), ZP-LS300L/600L (4~14μm). Spot beam: ZP-LS025S/050S/100S (0.6~1.3μm), ZP-LS300S/600S (4~14μm). Class 2 laser (Class 1 available with 'C' suffix). Cable 0.2m and 2m. Requires ZP-L amplifier unit (sold separately).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZP-LS025L 0.2M | Laser displacement head Line beam 0.5 μm 0.2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Line beam | Resolution: 0.5 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 0.2 m (recommended for robot cable use) | |
| ZP-LS025L 2M | Laser displacement head Line beam 0.5 μm 2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Line beam | Resolution: 0.5 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 2 m | |
| ZP-LS025S 0.2M | Laser displacement head Spot beam 0.6 μm 0.2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Spot beam | Resolution: 0.6 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 0.2 m (recommended for robot cable use) | |
| ZP-LS025S 2M | Laser displacement head Spot beam 0.6 μm 2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Spot beam | Resolution: 0.6 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 2 m | |
| ZP-LS050L 0.2M | Laser displacement head Line beam 0.7 μm 0.2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Line beam | Resolution: 0.7 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 0.2 m (recommended for robot cable use) | |
| ZP-LS050L 2M | Laser displacement head Line beam 0.7 μm 2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Line beam | Resolution: 0.7 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 2 m | |
| ZP-LS050S 0.2M | Laser displacement head Spot beam 0.8 μm 0.2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Spot beam | Resolution: 0.8 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 0.2 m (recommended for robot cable use) | |
| ZP-LS050S 2M | Laser displacement head Spot beam 0.8 μm 2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Spot beam | Resolution: 0.8 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 2 m | |
| ZP-LS100L 0.2M | Laser displacement head Line beam 1.2 μm 0.2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Line beam | Resolution: 1.2 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 0.2 m (recommended for robot cable use) | |
| ZP-LS100L 2M | Laser displacement head Line beam 1.2 μm 2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Line beam | Resolution: 1.2 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 2 m | |
| ZP-LS100S 0.2M | Laser displacement head Spot beam 1.3 μm 0.2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Spot beam | Resolution: 1.3 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 0.2 m (recommended for robot cable use) | |
| ZP-LS100S 2M | Laser displacement head Spot beam 1.3 μm 2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Spot beam | Resolution: 1.3 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 2 m | |
| ZP-LS300L 0.2M | Laser displacement head Line beam 4 μm 0.2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Line beam | Resolution: 4 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 0.2 m (recommended for robot cable use) | |
| ZP-LS300L 2M | Laser displacement head Line beam 4 μm 2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Line beam | Resolution: 4 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 2 m | |
| ZP-LS300S 0.2M | Laser displacement head Spot beam 4 μm 0.2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Spot beam | Resolution: 4 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 0.2 m (recommended for robot cable use) | |
| ZP-LS300S 2M | Laser displacement head Spot beam 4 μm 2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Spot beam | Resolution: 4 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 2 m | |
| ZP-LS600L 0.2M | Laser displacement head Line beam 14 μm 0.2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Line beam | Resolution: 14 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 0.2 m (recommended for robot cable use) | |
| ZP-LS600L 2M | Laser displacement head Line beam 14 μm 2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Line beam | Resolution: 14 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 2 m | |
| ZP-LS600S 0.2M | Laser displacement head Spot beam 14 μm 0.2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Spot beam | Resolution: 14 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 0.2 m (recommended for robot cable use) | |
| ZP-LS600S 2M | Laser displacement head Spot beam 14 μm 2m | OMRON | Optical System: Diffuse-reflective | Beam Shape: Spot beam | Resolution: 14 μm | Measurement Distance: Refer to datasheet | Laser Class: Class 2 (default); Class 1 also available — add 'C' suffix e.g. ZP-LS025LC 2M | Required Amplifier: ZP-L3000/3010/3050/3060 (Master) or ZP-L3500/3510/3550/3560 (Slave) | Extension Cable: XS3W-M42x-40x-R normal or -PR robot cable (sold separately, max 20m) | Cable Length: 2 m |
OMRON ZP-L Series IO-Link compatible amplifier units. COM3 (230.4 kbps). NPN/PNP switching. Judgment output HIGH/PASS/LOW. ZP-L3930-IL3: discrete wire. ZP-L3931-IL3: M12 connector.
OMRON ZP-L Series IO-Link compatible amplifier units. COM3 (230.4 kbps). NPN/PNP switching. Judgment output HIGH/PASS/LOW. ZP-L3930-IL3: discrete wire. ZP-L3931-IL3: M12 connector.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZP-L3930-IL3 | IO-Link discrete wire NPN/PNP switching | OMRON | Type: IO-Link Compatible Amplifier Unit | IO-Link: COM3 (230.4 kbps) | Connection: Discrete wire cable pull-out type | Analog Output: No | Judgment Output: HIGH/PASS/LOW (switching) | External Input: Yes (switching) | IO Type: NPN/PNP switching | |
| ZP-L3931-IL3 | IO-Link M12 connector NPN/PNP switching | OMRON | Type: IO-Link Compatible Amplifier Unit | IO-Link: COM3 (230.4 kbps) | Connection: M12 connector cable pull-out type | Analog Output: No | Judgment Output: HIGH/PASS/LOW (switching) | External Input: Yes (switching) | IO Type: NPN/PNP switching |
![[OMRON] — ZS-HL Series Smart Sensor Head 2D Displacement (Line Beam, Regular/Diffuse Reflective)](https://img.prosourcemro.com/2026/05/001-356-300x225.png)
OMRON ZS-HL Series 2D smart sensor heads. Line beam. Regular reflective ZS-HLDS2VT (25mm, 0.6μm). Diffuse reflective: ZS-HLDS5T (50mm), ZS-HLDS10 (100mm), ZS-HLDS60 (600mm), ZS-HLDS150 (1500mm). Cable 2m and 0.5m. Requires ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) controller.
OMRON ZS-HL Series 2D smart sensor heads. Line beam. Regular reflective ZS-HLDS2VT (25mm, 0.6μm). Diffuse reflective: ZS-HLDS5T (50mm), ZS-HLDS10 (100mm), ZS-HLDS60 (600mm), ZS-HLDS150 (1500mm). Cable 2m and 0.5m. Requires ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) controller.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZS-HLDS2VT 2M | ZS-HLDS2VT sensor head 2m | OMRON | Optical System: Regular Reflective | Sensing Distance: 25±2 mm | Beam Shape: Line beam | Beam Diameter: 2.2 mm × 45 μm | Resolution: 0.6 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 2 m | |
| ZS-HLDS2VT 0.5M | ZS-HLDS2VT sensor head 0.5m | OMRON | Optical System: Regular Reflective | Sensing Distance: 25±2 mm | Beam Shape: Line beam | Beam Diameter: 2.2 mm × 45 μm | Resolution: 0.6 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 0.5 m | |
| ZS-HLDS5T 2M | ZS-HLDS5T sensor head 2m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 50±5 mm | Beam Shape: Line beam | Beam Diameter: 1.0 mm × 0 μm | Resolution: 0.25 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 2 m | |
| ZS-HLDS5T 0.5M | ZS-HLDS5T sensor head 0.5m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 50±5 mm | Beam Shape: Line beam | Beam Diameter: 1.0 mm × 0 μm | Resolution: 0.25 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 0.5 m | |
| ZS-HLDS10 2M | ZS-HLDS10 sensor head 2m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 100±20 mm | Beam Shape: Line beam | Beam Diameter: 3.5 mm × 60 μm | Resolution: 1 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 2 m | |
| ZS-HLDS10 0.5M | ZS-HLDS10 sensor head 0.5m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 100±20 mm | Beam Shape: Line beam | Beam Diameter: 3.5 mm × 60 μm | Resolution: 1 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 0.5 m | |
| ZS-HLDS60 2M | ZS-HLDS60 sensor head 2m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 600±350 mm | Beam Shape: Line beam | Beam Diameter: 16 mm × 0.3 mm | Resolution: 8 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 2 m | |
| ZS-HLDS60 0.5M | ZS-HLDS60 sensor head 0.5m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 600±350 mm | Beam Shape: Line beam | Beam Diameter: 16 mm × 0.3 mm | Resolution: 8 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 0.5 m | |
| ZS-HLDS150 2M | ZS-HLDS150 sensor head 2m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 1500±500 mm | Beam Shape: Line beam | Beam Diameter: 40 mm × 1.5 mm | Resolution: 500 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 2 m | |
| ZS-HLDS150 0.5M | ZS-HLDS150 sensor head 0.5m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 1500±500 mm | Beam Shape: Line beam | Beam Diameter: 40 mm × 1.5 mm | Resolution: 500 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 0.5 m |
OMRON ZS-HL Series 2D smart sensor heads for nozzle gap measurement. Regular reflective. Line beam 900×25 μm. Resolution 0.25 μm. ZS-LD10GT: 10±0.5 mm. ZS-LD15GT: 15±0.75 mm. Cable 2m and 0.5m. Requires ZS-HLDC11-N or ZS-HLDC41-N controller.
OMRON ZS-HL Series 2D smart sensor heads for nozzle gap measurement. Regular reflective. Line beam 900×25 μm. Resolution 0.25 μm. ZS-LD10GT: 10±0.5 mm. ZS-LD15GT: 15±0.75 mm. Cable 2m and 0.5m. Requires ZS-HLDC11-N or ZS-HLDC41-N controller.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZS-LD10GT 2M | ZS-LD10GT sensor head 2m | OMRON | Optical System: Regular Reflective | Sensing Distance: 10±0.5 mm | Beam Shape: Line beam | Beam Diameter: 900 × 25 μm | Resolution: 0.25 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 2 m | |
| ZS-LD10GT 0.5M | ZS-LD10GT sensor head 0.5m | OMRON | Optical System: Regular Reflective | Sensing Distance: 10±0.5 mm | Beam Shape: Line beam | Beam Diameter: 900 × 25 μm | Resolution: 0.25 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 0.5 m | |
| ZS-LD15GT 2M | ZS-LD15GT sensor head 2m | OMRON | Optical System: Regular Reflective | Sensing Distance: 15±0.75 mm | Beam Shape: Line beam | Beam Diameter: 900 × 25 μm | Resolution: 0.25 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 2 m | |
| ZS-LD15GT 0.5M | ZS-LD15GT sensor head 0.5m | OMRON | Optical System: Regular Reflective | Sensing Distance: 15±0.75 mm | Beam Shape: Line beam | Beam Diameter: 900 × 25 μm | Resolution: 0.25 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately (max 22m with 2×ZS-XC[]B) | Cable Length: 0.5 m |
OMRON ZS-HL Series smart sensor controllers. 24 VDC. ZS-HLDC11-N (NPN output) and ZS-HLDC41-N (PNP output). Compatible with all ZS-HL and ZS-L series sensor heads. Panel mount adapters ZS-XPM1/XPM2 and RS-232C cables ZS-XRS3/XPT3 sold separately.
OMRON ZS-HL Series smart sensor controllers. 24 VDC. ZS-HLDC11-N (NPN output) and ZS-HLDC41-N (PNP output). Compatible with all ZS-HL and ZS-L series sensor heads. Panel mount adapters ZS-XPM1/XPM2 and RS-232C cables ZS-XRS3/XPT3 sold separately.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZS-HLDC11-N | ZS-HL Smart Sensor Controller NPN 24VDC | OMRON | Type: Smart Sensor Controller | Output: NPN | Power Supply: 24 VDC | Compatible Heads: ZS-HL / ZS-L series sensor heads | Note: Panel Mount Adapter ZS-XPM1 (1st) / ZS-XPM2 (expansion) sold separately | |
| ZS-HLDC41-N | ZS-HL Smart Sensor Controller PNP 24VDC | OMRON | Type: Smart Sensor Controller | Output: PNP | Power Supply: 24 VDC | Compatible Heads: ZS-HL / ZS-L series sensor heads | Note: Panel Mount Adapter ZS-XPM1 (1st) / ZS-XPM2 (expansion) sold separately |
OMRON ZS-L Series 2D smart sensor heads. Line and spot beam. Regular reflective: ZS-LD20T/20ST/40T. Diffuse reflective: ZS-LD50/50S/80/130/200/350S. Resolution 0.25~20 μm. High-precision mode: 128 samples average. Cable 2m and 0.5m. Requires ZS-HLDC11-N or ZS-HLDC41-N controller.
OMRON ZS-L Series 2D smart sensor heads. Line and spot beam. Regular reflective: ZS-LD20T/20ST/40T. Diffuse reflective: ZS-LD50/50S/80/130/200/350S. Resolution 0.25~20 μm. High-precision mode: 128 samples average. Cable 2m and 0.5m. Requires ZS-HLDC11-N or ZS-HLDC41-N controller.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZS-LD20T 2M | ZS-LD20T sensor head 2m | OMRON | Optical System: Regular Reflective | Sensing Distance: 20±1 mm | Beam Shape: Line beam | Beam Diameter: 900 × 25 μm | Resolution: 0.25 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 2 m | |
| ZS-LD20T 0.5M | ZS-LD20T sensor head 0.5m | OMRON | Optical System: Regular Reflective | Sensing Distance: 20±1 mm | Beam Shape: Line beam | Beam Diameter: 900 × 25 μm | Resolution: 0.25 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 0.5 m | |
| ZS-LD20ST 2M | ZS-LD20ST sensor head 2m | OMRON | Optical System: Regular Reflective | Sensing Distance: 20±1 mm | Beam Shape: Spot beam | Beam Diameter: 25 μm dia. | Resolution: 0.25 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 2 m | |
| ZS-LD20ST 0.5M | ZS-LD20ST sensor head 0.5m | OMRON | Optical System: Regular Reflective | Sensing Distance: 20±1 mm | Beam Shape: Spot beam | Beam Diameter: 25 μm dia. | Resolution: 0.25 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 0.5 m | |
| ZS-LD40T 2M | ZS-LD40T sensor head 2m | OMRON | Optical System: Regular Reflective | Sensing Distance: 40±2.5 mm | Beam Shape: Line beam | Beam Diameter: 2000 × 35 μm | Resolution: 0.4 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 2 m | |
| ZS-LD40T 0.5M | ZS-LD40T sensor head 0.5m | OMRON | Optical System: Regular Reflective | Sensing Distance: 40±2.5 mm | Beam Shape: Line beam | Beam Diameter: 2000 × 35 μm | Resolution: 0.4 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 0.5 m | |
| ZS-LD50 2M | ZS-LD50 sensor head 2m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 50±5 mm | Beam Shape: Line beam | Beam Diameter: 900 × 60 μm | Resolution: 0.8 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 2 m | |
| ZS-LD50 0.5M | ZS-LD50 sensor head 0.5m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 50±5 mm | Beam Shape: Line beam | Beam Diameter: 900 × 60 μm | Resolution: 0.8 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 0.5 m | |
| ZS-LD50S 2M | ZS-LD50S sensor head 2m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 50±5 mm | Beam Shape: Spot beam | Beam Diameter: 50 μm dia. | Resolution: 0.8 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 2 m | |
| ZS-LD50S 0.5M | ZS-LD50S sensor head 0.5m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 50±5 mm | Beam Shape: Spot beam | Beam Diameter: 50 μm dia. | Resolution: 0.8 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 0.5 m | |
| ZS-LD80 2M | ZS-LD80 sensor head 2m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 80±15 mm | Beam Shape: Line beam | Beam Diameter: 900 × 60 μm | Resolution: 2 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 2 m | |
| ZS-LD80 0.5M | ZS-LD80 sensor head 0.5m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 80±15 mm | Beam Shape: Line beam | Beam Diameter: 900 × 60 μm | Resolution: 2 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 0.5 m | |
| ZS-LD130 2M | ZS-LD130 sensor head 2m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 130±15 mm | Beam Shape: Line beam | Beam Diameter: 600 × 70 μm | Resolution: 3 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 2 m | |
| ZS-LD130 0.5M | ZS-LD130 sensor head 0.5m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 130±15 mm | Beam Shape: Line beam | Beam Diameter: 600 × 70 μm | Resolution: 3 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 0.5 m | |
| ZS-LD200 2M | ZS-LD200 sensor head 2m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 200±50 mm | Beam Shape: Line beam | Beam Diameter: 900 × 100 μm | Resolution: 5 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 2 m | |
| ZS-LD200 0.5M | ZS-LD200 sensor head 0.5m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 200±50 mm | Beam Shape: Line beam | Beam Diameter: 900 × 100 μm | Resolution: 5 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 0.5 m | |
| ZS-LD350S 2M | ZS-LD350S sensor head 2m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 350±135 mm | Beam Shape: Spot beam | Beam Diameter: 240 μm dia. | Resolution: 20 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 2 m | |
| ZS-LD350S 0.5M | ZS-LD350S sensor head 0.5m | OMRON | Optical System: Diffuse Reflective | Sensing Distance: 350±135 mm | Beam Shape: Spot beam | Beam Diameter: 240 μm dia. | Resolution: 20 μm | Required Controller: ZS-HLDC11-N (NPN) or ZS-HLDC41-N (PNP) | Extension Cable: ZS-XC1A/4A/5B/8A/10B sold separately | Cable Length: 0.5 m |
![[OMRON] — ZW Series Extension Fiber Cable and Fiber Adapter (ZW-8000/7000/5000)](https://img.prosourcemro.com/2026/05/001-354-300x225.png)
OMRON ZW Series extension flexible fiber cables and adapters. ZW-8000: ZW-XF8002R~30R (2~30m, Fiber Adapter ZW-XFCS included). ZW-7000: ZW-XF7002R~30R (2~30m, Fiber Adapter ZW-XFCM included). ZW-5000: ZW-XF5002R~30R (2~30m, Fiber Adapter ZW-XFC2 included). Fiber Adapter sold separately (ZW-XFCS/XFCM/XFC2).
OMRON ZW Series extension flexible fiber cables and adapters. ZW-8000: ZW-XF8002R~30R (2~30m, Fiber Adapter ZW-XFCS included). ZW-7000: ZW-XF7002R~30R (2~30m, Fiber Adapter ZW-XFCM included). ZW-5000: ZW-XF5002R~30R (2~30m, Fiber Adapter ZW-XFC2 included). Fiber Adapter sold separately (ZW-XFCS/XFCM/XFC2).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZW-XF8002R | ZW-8000 extension fiber cable 2 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-8000 | Cable Length: 2 m | Included: Fiber Adapter ZW-XFCS | Compatible Controller: ZW-8000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF8005R | ZW-8000 extension fiber cable 5 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-8000 | Cable Length: 5 m | Included: Fiber Adapter ZW-XFCS | Compatible Controller: ZW-8000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF8010R | ZW-8000 extension fiber cable 10 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-8000 | Cable Length: 10 m | Included: Fiber Adapter ZW-XFCS | Compatible Controller: ZW-8000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF8020R | ZW-8000 extension fiber cable 20 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-8000 | Cable Length: 20 m | Included: Fiber Adapter ZW-XFCS | Compatible Controller: ZW-8000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF8030R | ZW-8000 extension fiber cable 30 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-8000 | Cable Length: 30 m | Included: Fiber Adapter ZW-XFCS | Compatible Controller: ZW-8000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF7002R | ZW-7000 extension fiber cable 2 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-7000 | Cable Length: 2 m | Included: Fiber Adapter ZW-XFCM | Compatible Controller: ZW-7000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF7005R | ZW-7000 extension fiber cable 5 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-7000 | Cable Length: 5 m | Included: Fiber Adapter ZW-XFCM | Compatible Controller: ZW-7000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF7010R | ZW-7000 extension fiber cable 10 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-7000 | Cable Length: 10 m | Included: Fiber Adapter ZW-XFCM | Compatible Controller: ZW-7000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF7020R | ZW-7000 extension fiber cable 20 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-7000 | Cable Length: 20 m | Included: Fiber Adapter ZW-XFCM | Compatible Controller: ZW-7000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF7030R | ZW-7000 extension fiber cable 30 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-7000 | Cable Length: 30 m | Included: Fiber Adapter ZW-XFCM | Compatible Controller: ZW-7000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF5002R | ZW-5000 extension fiber cable 2 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-5000 | Cable Length: 2 m | Included: Fiber Adapter ZW-XFC2 | Compatible Controller: ZW-5000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF5005R | ZW-5000 extension fiber cable 5 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-5000 | Cable Length: 5 m | Included: Fiber Adapter ZW-XFC2 | Compatible Controller: ZW-5000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF5010R | ZW-5000 extension fiber cable 10 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-5000 | Cable Length: 10 m | Included: Fiber Adapter ZW-XFC2 | Compatible Controller: ZW-5000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF5020R | ZW-5000 extension fiber cable 20 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-5000 | Cable Length: 20 m | Included: Fiber Adapter ZW-XFC2 | Compatible Controller: ZW-5000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XF5030R | ZW-5000 extension fiber cable 30 m | OMRON | Type: Extension Flexible Fiber Cable | Series: ZW-5000 | Cable Length: 30 m | Included: Fiber Adapter ZW-XFC2 | Compatible Controller: ZW-5000T | Note: Firmware version requirements: check release notes for 10/20/30m models | |
| ZW-XFCS | ZW-8000 fiber adapter | OMRON | Type: Fiber Adapter | Series: ZW-8000 | Use: Between sensor head pre-wired cable and extension fiber cable | |
| ZW-XFCM | ZW-7000 fiber adapter | OMRON | Type: Fiber Adapter | Series: ZW-7000 | Use: Between sensor head pre-wired cable and extension fiber cable | |
| ZW-XFC2 | ZW-5000 fiber adapter | OMRON | Type: Fiber Adapter | Series: ZW-5000 | Use: Between sensor head pre-wired cable and extension fiber cable |
OMRON ZW-5000 Series confocal fiber displacement sensor heads. Static resolution 0.25 μm (with ZW-5000T controller). Square straight: ZW-S5010/20/30 (9/13/18 μm spot). Pen straight: ZW-SP5007/5010 (13/18 μm spot). Pen right-angle: ZW-SPR5007/5010 (15/20 μm spot). Cable 2 m and 0.3 m. Extension fiber cables sold separately.
OMRON ZW-5000 Series confocal fiber displacement sensor heads. Static resolution 0.25 μm (with ZW-5000T controller). Square straight: ZW-S5010/20/30 (9/13/18 μm spot). Pen straight: ZW-SP5007/5010 (13/18 μm spot). Pen right-angle: ZW-SPR5007/5010 (15/20 μm spot). Cable 2 m and 0.3 m. Extension fiber cables sold separately.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZW-S5010 2M | ZW-5000 Square straight 9 μm dia. sensor head 2m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 9 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 2 m | |
| ZW-S5010 0.3M | ZW-5000 Square straight 9 μm dia. sensor head 0.3m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 9 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach | |
| ZW-S5020 2M | ZW-5000 Square straight 13 μm dia. sensor head 2m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 13 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 2 m | |
| ZW-S5020 0.3M | ZW-5000 Square straight 13 μm dia. sensor head 0.3m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 13 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach | |
| ZW-S5030 2M | ZW-5000 Square straight 18 μm dia. sensor head 2m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 18 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 2 m | |
| ZW-S5030 0.3M | ZW-5000 Square straight 18 μm dia. sensor head 0.3m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 18 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach | |
| ZW-SP5007 2M | ZW-5000 Pen straight 13 μm dia. sensor head 2m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Pen straight | Spot Diameter: 13 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 2 m | |
| ZW-SP5007 0.3M | ZW-5000 Pen straight 13 μm dia. sensor head 0.3m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Pen straight | Spot Diameter: 13 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach | |
| ZW-SP5010 2M | ZW-5000 Pen straight 18 μm dia. sensor head 2m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Pen straight | Spot Diameter: 18 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 2 m | |
| ZW-SP5010 0.3M | ZW-5000 Pen straight 18 μm dia. sensor head 0.3m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Pen straight | Spot Diameter: 18 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach | |
| ZW-SPR5007 2M | ZW-5000 Pen right-angle 15 μm dia. sensor head 2m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Pen right-angle | Spot Diameter: 15 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 2 m | |
| ZW-SPR5007 0.3M | ZW-5000 Pen right-angle 15 μm dia. sensor head 0.3m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Pen right-angle | Spot Diameter: 15 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach | |
| ZW-SPR5010 2M | ZW-5000 Pen right-angle 20 μm dia. sensor head 2m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Pen right-angle | Spot Diameter: 20 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 2 m | |
| ZW-SPR5010 0.3M | ZW-5000 Pen right-angle 20 μm dia. sensor head 0.3m | OMRON | Series: ZW-5000 | Sensing Method: Confocal fiber displacement | Shape: Pen right-angle | Spot Diameter: 20 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-5000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach |
OMRON ZW-7000 Series confocal fiber displacement sensor heads. Static resolution 0.25 μm (with ZW-7000T controller). Square straight: ZW-S7010/20/30/40 (50/70/100/120 μm spot). Pen straight: ZW-SP7007/7010 (130/170 μm spot). Pen right-angle: ZW-SPR7007/7010 (150/190 μm spot). Cable 2 m and 0.3 m. Extension fiber cables sold separately.
OMRON ZW-7000 Series confocal fiber displacement sensor heads. Static resolution 0.25 μm (with ZW-7000T controller). Square straight: ZW-S7010/20/30/40 (50/70/100/120 μm spot). Pen straight: ZW-SP7007/7010 (130/170 μm spot). Pen right-angle: ZW-SPR7007/7010 (150/190 μm spot). Cable 2 m and 0.3 m. Extension fiber cables sold separately.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| ZW-S7010 2M | ZW-7000 Square straight 50 μm dia. sensor head 2m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 50 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 2 m | |
| ZW-S7010 0.3M | ZW-7000 Square straight 50 μm dia. sensor head 0.3m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 50 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach | |
| ZW-S7020 2M | ZW-7000 Square straight 70 μm dia. sensor head 2m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 70 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 2 m | |
| ZW-S7020 0.3M | ZW-7000 Square straight 70 μm dia. sensor head 0.3m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 70 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach | |
| ZW-S7030 2M | ZW-7000 Square straight 100 μm dia. sensor head 2m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 100 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 2 m | |
| ZW-S7030 0.3M | ZW-7000 Square straight 100 μm dia. sensor head 0.3m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 100 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach | |
| ZW-S7040 2M | ZW-7000 Square straight 120 μm dia. sensor head 2m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 120 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 2 m | |
| ZW-S7040 0.3M | ZW-7000 Square straight 120 μm dia. sensor head 0.3m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Square straight | Spot Diameter: 120 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach | |
| ZW-SP7007 2M | ZW-7000 Pen straight 130 μm dia. sensor head 2m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Pen straight | Spot Diameter: 130 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 2 m | |
| ZW-SP7007 0.3M | ZW-7000 Pen straight 130 μm dia. sensor head 0.3m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Pen straight | Spot Diameter: 130 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach | |
| ZW-SP7010 2M | ZW-7000 Pen straight 170 μm dia. sensor head 2m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Pen straight | Spot Diameter: 170 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 2 m | |
| ZW-SP7010 0.3M | ZW-7000 Pen straight 170 μm dia. sensor head 0.3m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Pen straight | Spot Diameter: 170 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach | |
| ZW-SPR7007 2M | ZW-7000 Pen right-angle 150 μm dia. sensor head 2m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Pen right-angle | Spot Diameter: 150 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 2 m | |
| ZW-SPR7007 0.3M | ZW-7000 Pen right-angle 150 μm dia. sensor head 0.3m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Pen right-angle | Spot Diameter: 150 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach | |
| ZW-SPR7010 2M | ZW-7000 Pen right-angle 190 μm dia. sensor head 2m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Pen right-angle | Spot Diameter: 190 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 2 m | |
| ZW-SPR7010 0.3M | ZW-7000 Pen right-angle 190 μm dia. sensor head 0.3m | OMRON | Series: ZW-7000 | Sensing Method: Confocal fiber displacement | Shape: Pen right-angle | Spot Diameter: 190 μm dia. | Static Resolution: 0.25 μm | Measuring Range: Refer to datasheet | Required Controller: ZW-7000T | Cable Length: 0.3 m | Note: Use Extension Fiber Cable ZW-XF[][]R for longer reach |