🔍
Can't find your part? We source far beyond this catalog —
list any MRO part, even if it's not listed here, and we'll quote it direct from Korean makers.
Submit an RFQ →
Roller Guides
![[THK] — Rod End NOS-T (Male Thread, Maintenance-Free)](https://img.prosourcemro.com/2026/05/001-1068-300x240.png)
THK NOS-T type Maintenance-Free Rod End with male (external) thread. Same construction as NHS-T (female thread) type. Self-lubricating synthetic resin bushing; no grease nipple required. Ball diameter (inch series): 9.525~38.1mm (3/8"~1-1/2"). NOS3T/4T: S20C holder; NOS5T~NOS22T: S35C chromate. Left-hand thread: suffix L.
THK NOS-T type Maintenance-Free Rod End with male (external) thread. Same construction as NHS-T (female thread) type. Self-lubricating synthetic resin bushing; no grease nipple required. Ball diameter (inch series): 9.525~38.1mm (3/8"~1-1/2"). NOS3T/4T: S20C holder; NOS5T~NOS22T: S35C chromate. Left-hand thread: suffix L.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| NOS3T | THK Rod End NOS3T (male, maintenance-free), thread=M3×0.5, Da=9.525mm, Cs=1570N | THK | Thread (male): M3×0.5 | Total Length (L): 33 mm | Holder Diameter (D): 12 mm | Ball Diameter (Da): 9.525 mm (3/8") | Bore Diameter (d): 3 mm | Allowable Tilt Angle α1/α2/α3: 8°/10°/42° | Radial Clearance: ≤0.3 mm | Static Load Capacity (Cs): 1570 N | Mass: 4.5 g | Holder Material: S20C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Self-lubricating synthetic resin (maintenance-free) | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| NOS4T | THK Rod End NOS4T (male, maintenance-free), thread=M4×0.7, Da=10.319mm, Cs=2250N | THK | Thread (male): M4×0.7 | Total Length (L): 37 mm | Holder Diameter (D): 14 mm | Ball Diameter (Da): 10.319 mm (13/32") | Bore Diameter (d): 4 mm | Allowable Tilt Angle α1/α2/α3: 9°/11°/35° | Radial Clearance: ≤0.3 mm | Static Load Capacity (Cs): 2250 N | Mass: 7.0 g | Holder Material: S20C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Self-lubricating synthetic resin (maintenance-free) | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| NOS5T | THK Rod End NOS5T (male, maintenance-free), thread=M5×0.8, Da=11.112mm, Cs=3430N | THK | Thread (male): M5×0.8 | Total Length (L): 41 mm | Holder Diameter (D): 16 mm | Ball Diameter (Da): 11.112 mm (7/16") | Bore Diameter (d): 5 mm | Allowable Tilt Angle α1/α2/α3: 8°/13°/30° | Radial Clearance: ≤0.3 mm | Static Load Capacity (Cs): 3430 N | Mass: 12.5 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Self-lubricating synthetic resin (maintenance-free) | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| NOS6T | THK Rod End NOS6T (male, maintenance-free), thread=M6×1, Da=12.7mm, Cs=4900N | THK | Thread (male): M6×1 | Total Length (L): 45 mm | Holder Diameter (D): 18 mm | Ball Diameter (Da): 12.7 mm (1/2") | Bore Diameter (d): 6 mm | Allowable Tilt Angle α1/α2/α3: 8°/13°/30° | Radial Clearance: ≤0.3 mm | Static Load Capacity (Cs): 4900 N | Mass: 19.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Self-lubricating synthetic resin (maintenance-free) | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| NOS8T | THK Rod End NOS8T (male, maintenance-free), thread=M8×1.25, Da=15.875mm, Cs=6860N | THK | Thread (male): M8×1.25 | Total Length (L): 53 mm | Holder Diameter (D): 22 mm | Ball Diameter (Da): 15.875 mm (5/8") | Bore Diameter (d): 8 mm | Allowable Tilt Angle α1/α2/α3: 8°/14°/25° | Radial Clearance: ≤0.5 mm | Static Load Capacity (Cs): 6860 N | Mass: 32.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Self-lubricating synthetic resin (maintenance-free) | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| NOS10T | THK Rod End NOS10T (male, maintenance-free), thread=M10×1.5, Da=19.05mm, Cs=9410N | THK | Thread (male): M10×1.5 | Total Length (L): 61 mm | Holder Diameter (D): 26 mm | Ball Diameter (Da): 19.05 mm (3/4") | Bore Diameter (d): 10 mm | Allowable Tilt Angle α1/α2/α3: 8°/14°/25° | Radial Clearance: ≤0.5 mm | Static Load Capacity (Cs): 9410 N | Mass: 54.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Self-lubricating synthetic resin (maintenance-free) | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| NOS12T | THK Rod End NOS12T (male, maintenance-free), thread=M12×1.75, Da=22.225mm, Cs=11000N | THK | Thread (male): M12×1.75 | Total Length (L): 69 mm | Holder Diameter (D): 30 mm | Ball Diameter (Da): 22.225 mm (7/8") | Bore Diameter (d): 12 mm | Allowable Tilt Angle α1/α2/α3: 8°/13°/25° | Radial Clearance: ≤0.5 mm | Static Load Capacity (Cs): 11000 N | Mass: 85.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Self-lubricating synthetic resin (maintenance-free) | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| NOS14T | THK Rod End NOS14T (male, maintenance-free), thread=M14×2, Da=25.4mm, Cs=15200N | THK | Thread (male): M14×2 | Total Length (L): 77 mm | Holder Diameter (D): 34 mm | Ball Diameter (Da): 25.4 mm (1") | Bore Diameter (d): 14 mm | Allowable Tilt Angle α1/α2/α3: 10°/16°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 15200 N | Mass: 126.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Self-lubricating synthetic resin (maintenance-free) | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| NOS16T | THK Rod End NOS16T (male, maintenance-free), thread=M16×2, Da=28.575mm, Cs=20200N | THK | Thread (male): M16×2 | Total Length (L): 85 mm | Holder Diameter (D): 38 mm | Ball Diameter (Da): 28.575 mm (1-1/8") | Bore Diameter (d): 16 mm | Allowable Tilt Angle α1/α2/α3: 9°/15°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 20200 N | Mass: 185.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Self-lubricating synthetic resin (maintenance-free) | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| NOS18T | THK Rod End NOS18T (male, maintenance-free), thread=M18×1.5, Da=31.75mm, Cs=25200N | THK | Thread (male): M18×1.5 | Total Length (L): 93 mm | Holder Diameter (D): 42 mm | Ball Diameter (Da): 31.75 mm (1-1/4") | Bore Diameter (d): 18 mm | Allowable Tilt Angle α1/α2/α3: 9°/15°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 25200 N | Mass: 260.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Self-lubricating synthetic resin (maintenance-free) | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| NOS20T | THK Rod End NOS20T (male, maintenance-free), thread=M20×1.5, Da=34.925mm, Cs=27800N | THK | Thread (male): M20×1.5 | Total Length (L): 101 mm | Holder Diameter (D): 46 mm | Ball Diameter (Da): 34.925 mm (1-3/8") | Bore Diameter (d): 20 mm | Allowable Tilt Angle α1/α2/α3: 9°/15°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 27800 N | Mass: 340.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Self-lubricating synthetic resin (maintenance-free) | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| NOS22T | THK Rod End NOS22T (male, maintenance-free), thread=M22×1.5, Da=38.1mm, Cs=35900N | THK | Thread (male): M22×1.5 | Total Length (L): 109 mm | Holder Diameter (D): 50 mm | Ball Diameter (Da): 38.1 mm (1-1/2") | Bore Diameter (d): 22 mm | Allowable Tilt Angle α1/α2/α3: 10°/15°/23° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 35900 N | Mass: 435.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Self-lubricating synthetic resin (maintenance-free) | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix |
![[THK] — Rod End PHS (Female Thread Type)](https://img.prosourcemro.com/2026/05/001-1065-300x300.png)
THK PHS type Rod End with female (internal) thread. Steel holder (S35C, chromate) with spherical inner ring (SUJ2, 58HRC+) and bronze alloy bushing. Spherical outer surface hard chrome plated; high rigidity, wear and corrosion resistance. Ball diameter (inch series): 11.112~50.8mm (7/16"~2"). Shaft fit: h7 (normal load) or p6 (indeterminate load direction). Lubrication via grease nipple. Left-hand thread: suffix L.
THK PHS type Rod End with female (internal) thread. Steel holder (S35C, chromate) with spherical inner ring (SUJ2, 58HRC+) and bronze alloy bushing. Spherical outer surface hard chrome plated; high rigidity, wear and corrosion resistance. Ball diameter (inch series): 11.112~50.8mm (7/16"~2"). Shaft fit: h7 (normal load) or p6 (indeterminate load direction). Lubrication via grease nipple. Left-hand thread: suffix L.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| PHS5 | THK Rod End PHS5 (female), thread=M5×0.8, Da=11.112mm, Cs=5590N | THK | Thread (female): M5×0.8 | Total Length (L): 35 mm | Holder Diameter (D): 16 mm | Ball Diameter (Da): 11.112 mm (7/16") | Bore Diameter (d): 5 mm | Allowable Tilt Angle α1/α2/α3: 8°/13°/30° | Radial Clearance: ≤0.3 mm | Static Load Capacity (Cs): 5590 N | Mass: 16.5 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| PHS6 | THK Rod End PHS6 (female), thread=M6×1, Da=12.7mm, Cs=6860N | THK | Thread (female): M6×1 | Total Length (L): 39 mm | Holder Diameter (D): 18 mm | Ball Diameter (Da): 12.7 mm (1/2") | Bore Diameter (d): 6 mm | Allowable Tilt Angle α1/α2/α3: 8°/13°/30° | Radial Clearance: ≤0.3 mm | Static Load Capacity (Cs): 6860 N | Mass: 25.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| PHS8 | THK Rod End PHS8 (female), thread=M8×1.25, Da=15.875mm, Cs=9800N | THK | Thread (female): M8×1.25 | Total Length (L): 47 mm | Holder Diameter (D): 22 mm | Ball Diameter (Da): 15.875 mm (5/8") | Bore Diameter (d): 8 mm | Allowable Tilt Angle α1/α2/α3: 8°/14°/25° | Radial Clearance: ≤0.5 mm | Static Load Capacity (Cs): 9800 N | Mass: 43.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| PHS10 | THK Rod End PHS10 (female), thread=M10×1.5, Da=19.05mm, Cs=13200N | THK | Thread (female): M10×1.5 | Total Length (L): 56 mm | Holder Diameter (D): 26 mm | Ball Diameter (Da): 19.05 mm (3/4") | Bore Diameter (d): 10 mm | Allowable Tilt Angle α1/α2/α3: 8°/14°/25° | Radial Clearance: ≤0.5 mm | Static Load Capacity (Cs): 13200 N | Mass: 72.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| PHS12 | THK Rod End PHS12 (female), thread=M12×1.75, Da=22.225mm, Cs=16700N | THK | Thread (female): M12×1.75 | Total Length (L): 65 mm | Holder Diameter (D): 30 mm | Ball Diameter (Da): 22.225 mm (7/8") | Bore Diameter (d): 12 mm | Allowable Tilt Angle α1/α2/α3: 8°/13°/25° | Radial Clearance: ≤0.5 mm | Static Load Capacity (Cs): 16700 N | Mass: 107.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| PHS14 | THK Rod End PHS14 (female), thread=M14×2, Da=25.4mm, Cs=20600N | THK | Thread (female): M14×2 | Total Length (L): 74 mm | Holder Diameter (D): 34 mm | Ball Diameter (Da): 25.4 mm (1") | Bore Diameter (d): 14 mm | Allowable Tilt Angle α1/α2/α3: 10°/16°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 20600 N | Mass: 160.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| PHS16 | THK Rod End PHS16 (female), thread=M16×2, Da=28.575mm, Cs=25000N | THK | Thread (female): M16×2 | Total Length (L): 83 mm | Holder Diameter (D): 38 mm | Ball Diameter (Da): 28.575 mm (1-1/8") | Bore Diameter (d): 16 mm | Allowable Tilt Angle α1/α2/α3: 9°/15°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 25000 N | Mass: 210.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| PHS18 | THK Rod End PHS18 (female), thread=M18×1.5, Da=31.75mm, Cs=29400N | THK | Thread (female): M18×1.5 | Total Length (L): 92 mm | Holder Diameter (D): 42 mm | Ball Diameter (Da): 31.75 mm (1-1/4") | Bore Diameter (d): 18 mm | Allowable Tilt Angle α1/α2/α3: 9°/15°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 29400 N | Mass: 295.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| PHS20 | THK Rod End PHS20 (female), thread=M20×1.5, Da=34.925mm, Cs=34300N | THK | Thread (female): M20×1.5 | Total Length (L): 100 mm | Holder Diameter (D): 46 mm | Ball Diameter (Da): 34.925 mm (1-3/8") | Bore Diameter (d): 20 mm | Allowable Tilt Angle α1/α2/α3: 9°/15°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 34300 N | Mass: 380.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| PHS22 | THK Rod End PHS22 (female), thread=M22×1.5, Da=38.1mm, Cs=41200N | THK | Thread (female): M22×1.5 | Total Length (L): 109 mm | Holder Diameter (D): 50 mm | Ball Diameter (Da): 38.1 mm (1-1/2") | Bore Diameter (d): 22 mm | Allowable Tilt Angle α1/α2/α3: 10°/15°/23° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 41200 N | Mass: 490.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| PHS25 | THK Rod End PHS25 (female), thread=M24×2, Da=42.862mm, Cs=72500N | THK | Thread (female): M24×2 | Total Length (L): 124 mm | Holder Diameter (D): 60 mm | Ball Diameter (Da): 42.862 mm (1-11/16") | Bore Diameter (d): 25 mm | Allowable Tilt Angle α1/α2/α3: 9°/15°/23° | Radial Clearance: ≤0.8 mm | Static Load Capacity (Cs): 72500 N | Mass: 750.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| PHS30 | THK Rod End PHS30 (female), thread=M30×2, Da=50.8mm, Cs=92200N | THK | Thread (female): M30×2 | Total Length (L): 145 mm | Holder Diameter (D): 70 mm | Ball Diameter (Da): 50.8 mm (2") | Bore Diameter (d): 30 mm | Allowable Tilt Angle α1/α2/α3: 10°/17°/23° | Radial Clearance: ≤0.8 mm | Static Load Capacity (Cs): 92200 N | Mass: 1130.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix |
![[THK] — Rod End POS (Male Thread Type)](https://img.prosourcemro.com/2026/05/001-1067-300x240.png)
THK POS type Rod End with male (external) thread. Same high-rigidity construction as PHS (female thread) type. Steel holder (S35C, chromate), spherical inner ring (SUJ2, 58HRC+), bronze alloy bushing. POS5/6: lubrication via oil port on holder. POS8 and larger: grease nipple. Ball diameter (inch series): 11.112~50.8mm (7/16"~2"). Left-hand thread: suffix L.
THK POS type Rod End with male (external) thread. Same high-rigidity construction as PHS (female thread) type. Steel holder (S35C, chromate), spherical inner ring (SUJ2, 58HRC+), bronze alloy bushing. POS5/6: lubrication via oil port on holder. POS8 and larger: grease nipple. Ball diameter (inch series): 11.112~50.8mm (7/16"~2"). Left-hand thread: suffix L.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| POS5 | THK Rod End POS5 (male thread), thread=M5×0.8, Da=11.112mm, Cs=3430N | THK | Thread (male): M5×0.8 | Total Length (L): 41 mm | Holder Diameter (D): 16 mm | Ball Diameter (Da): 11.112 mm (7/16") | Bore Diameter (d): 5 mm | Allowable Tilt Angle α1/α2/α3: 8°/13°/30° | Radial Clearance: ≤0.3 mm | Static Load Capacity (Cs): 3430 N | Mass: 12.5 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Bronze alloy | Lubrication: Oil port on holder | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| POS6 | THK Rod End POS6 (male thread), thread=M6×1, Da=12.7mm, Cs=4900N | THK | Thread (male): M6×1 | Total Length (L): 45 mm | Holder Diameter (D): 18 mm | Ball Diameter (Da): 12.7 mm (1/2") | Bore Diameter (d): 6 mm | Allowable Tilt Angle α1/α2/α3: 8°/13°/30° | Radial Clearance: ≤0.3 mm | Static Load Capacity (Cs): 4900 N | Mass: 19.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Bronze alloy | Lubrication: Oil port on holder | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| POS8 | THK Rod End POS8 (male thread), thread=M8×1.25, Da=15.875mm, Cs=6860N | THK | Thread (male): M8×1.25 | Total Length (L): 53 mm | Holder Diameter (D): 22 mm | Ball Diameter (Da): 15.875 mm (5/8") | Bore Diameter (d): 8 mm | Allowable Tilt Angle α1/α2/α3: 8°/14°/25° | Radial Clearance: ≤0.5 mm | Static Load Capacity (Cs): 6860 N | Mass: 32.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Bronze alloy | Lubrication: Grease nipple | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| POS10 | THK Rod End POS10 (male thread), thread=M10×1.5, Da=19.05mm, Cs=10800N | THK | Thread (male): M10×1.5 | Total Length (L): 61 mm | Holder Diameter (D): 26 mm | Ball Diameter (Da): 19.05 mm (3/4") | Bore Diameter (d): 10 mm | Allowable Tilt Angle α1/α2/α3: 8°/14°/25° | Radial Clearance: ≤0.5 mm | Static Load Capacity (Cs): 10800 N | Mass: 54.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Bronze alloy | Lubrication: Grease nipple | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| POS12 | THK Rod End POS12 (male thread), thread=M12×1.75, Da=22.225mm, Cs=16700N | THK | Thread (male): M12×1.75 | Total Length (L): 69 mm | Holder Diameter (D): 30 mm | Ball Diameter (Da): 22.225 mm (7/8") | Bore Diameter (d): 12 mm | Allowable Tilt Angle α1/α2/α3: 8°/13°/25° | Radial Clearance: ≤0.5 mm | Static Load Capacity (Cs): 16700 N | Mass: 85.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Bronze alloy | Lubrication: Grease nipple | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| POS14 | THK Rod End POS14 (male thread), thread=M14×2, Da=25.4mm, Cs=20600N | THK | Thread (male): M14×2 | Total Length (L): 77 mm | Holder Diameter (D): 34 mm | Ball Diameter (Da): 25.4 mm (1") | Bore Diameter (d): 14 mm | Allowable Tilt Angle α1/α2/α3: 10°/16°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 20600 N | Mass: 126.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Bronze alloy | Lubrication: Grease nipple | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| POS16 | THK Rod End POS16 (male thread), thread=M16×2, Da=28.575mm, Cs=25000N | THK | Thread (male): M16×2 | Total Length (L): 85 mm | Holder Diameter (D): 38 mm | Ball Diameter (Da): 28.575 mm (1-1/8") | Bore Diameter (d): 16 mm | Allowable Tilt Angle α1/α2/α3: 9°/15°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 25000 N | Mass: 185.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Bronze alloy | Lubrication: Grease nipple | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| POS18 | THK Rod End POS18 (male thread), thread=M18×1.5, Da=31.75mm, Cs=29400N | THK | Thread (male): M18×1.5 | Total Length (L): 93 mm | Holder Diameter (D): 42 mm | Ball Diameter (Da): 31.75 mm (1-1/4") | Bore Diameter (d): 18 mm | Allowable Tilt Angle α1/α2/α3: 9°/15°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 29400 N | Mass: 260.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Bronze alloy | Lubrication: Grease nipple | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| POS20 | THK Rod End POS20 (male thread), thread=M20×1.5, Da=34.925mm, Cs=34300N | THK | Thread (male): M20×1.5 | Total Length (L): 101 mm | Holder Diameter (D): 46 mm | Ball Diameter (Da): 34.925 mm (1-3/8") | Bore Diameter (d): 20 mm | Allowable Tilt Angle α1/α2/α3: 9°/15°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 34300 N | Mass: 340.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Bronze alloy | Lubrication: Grease nipple | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| POS22 | THK Rod End POS22 (male thread), thread=M22×1.5, Da=38.1mm, Cs=41200N | THK | Thread (male): M22×1.5 | Total Length (L): 109 mm | Holder Diameter (D): 50 mm | Ball Diameter (Da): 38.1 mm (1-1/2") | Bore Diameter (d): 22 mm | Allowable Tilt Angle α1/α2/α3: 10°/15°/23° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 41200 N | Mass: 435.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Bronze alloy | Lubrication: Grease nipple | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| POS25 | THK Rod End POS25 (male thread), thread=M24×2, Da=42.862mm, Cs=72500N | THK | Thread (male): M24×2 | Total Length (L): 124 mm | Holder Diameter (D): 60 mm | Ball Diameter (Da): 42.862 mm (1-11/16") | Bore Diameter (d): 25 mm | Allowable Tilt Angle α1/α2/α3: 9°/15°/23° | Radial Clearance: ≤0.8 mm | Static Load Capacity (Cs): 72500 N | Mass: 650.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Bronze alloy | Lubrication: Grease nipple | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix | |
| POS30 | THK Rod End POS30 (male thread), thread=M30×2, Da=50.8mm, Cs=92200N | THK | Thread (male): M30×2 | Total Length (L): 145 mm | Holder Diameter (D): 70 mm | Ball Diameter (Da): 50.8 mm (2") | Bore Diameter (d): 30 mm | Allowable Tilt Angle α1/α2/α3: 10°/17°/23° | Radial Clearance: ≤0.8 mm | Static Load Capacity (Cs): 92200 N | Mass: 1070.0 g | Holder Material: S35C (chromate) | Inner Ring: SUJ2 58HRC+ | Bushing: Bronze alloy | Lubrication: Grease nipple | Shaft Fit: h7 (normal) / p6 (indeterminate direction) | Left-hand thread: add L suffix |
![[THK] — Separable Needle Roller Bearing NAST](https://img.prosourcemro.com/2026/05/001-1057-300x300.png)
THK NAST type Separable Needle Roller Bearing. Combines thick outer ring, inner ring, and precision cage with needle rollers in a separable bearing system. Inner diameter di = 6~50mm, outer diameter D = 19~90mm. Cylindrical and spherical outer ring (R500) options. NAST45: carbon steel only. Options: M (stainless, except NAST45), R (spherical outer ring R500).
THK NAST type Separable Needle Roller Bearing. Combines thick outer ring, inner ring, and precision cage with needle rollers in a separable bearing system. Inner diameter di = 6~50mm, outer diameter D = 19~90mm. Cylindrical and spherical outer ring (R500) options. NAST45: carbon steel only. Options: M (stainless, except NAST45), R (spherical outer ring R500).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| NAST6 | THK Separable Needle Roller Bearing NAST6, di=6mm, D=19mm, C=4.12kN | THK | Inner Diameter (di): 6 mm | Inner Contact Diameter (dr): 10 mm | Outer Diameter (D): 19 mm | Width (B): 10 mm | Effective Width (C): 9.8 mm | Basic Dynamic Load Rating C: 4.12 kN | Basic Static Load Rating C0: 4.55 kN | Track Load Capacity (cylindrical): 3.53 kN | Track Load Capacity (spherical): 1.37 kN | Limit Speed: 20000 min⁻¹ | Mass: 17.8 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, R=spherical outer ring (R500) | Type: Separable (thick outer ring + inner ring + cage needle rollers) | |
| NAST8 | THK Separable Needle Roller Bearing NAST8, di=8mm, D=24mm, C=5.68kN | THK | Inner Diameter (di): 8 mm | Inner Contact Diameter (dr): 12 mm | Outer Diameter (D): 24 mm | Width (B): 10 mm | Effective Width (C): 9.8 mm | Basic Dynamic Load Rating C: 5.68 kN | Basic Static Load Rating C0: 5.89 kN | Track Load Capacity (cylindrical): 4.02 kN | Track Load Capacity (spherical): 1.86 kN | Limit Speed: 17000 min⁻¹ | Mass: 28.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, R=spherical outer ring (R500) | Type: Separable (thick outer ring + inner ring + cage needle rollers) | |
| NAST10 | THK Separable Needle Roller Bearing NAST10, di=10mm, D=30mm, C=9.7kN | THK | Inner Diameter (di): 10 mm | Inner Contact Diameter (dr): 14 mm | Outer Diameter (D): 30 mm | Width (B): 12 mm | Effective Width (C): 11.8 mm | Basic Dynamic Load Rating C: 9.7 kN | Basic Static Load Rating C0: 9.67 kN | Track Load Capacity (cylindrical): 5.59 kN | Track Load Capacity (spherical): 2.45 kN | Limit Speed: 15000 min⁻¹ | Mass: 50.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, R=spherical outer ring (R500) | Type: Separable (thick outer ring + inner ring + cage needle rollers) | |
| NAST12 | THK Separable Needle Roller Bearing NAST12, di=12mm, D=32mm, C=10.4kN | THK | Inner Diameter (di): 12 mm | Inner Contact Diameter (dr): 16 mm | Outer Diameter (D): 32 mm | Width (B): 12 mm | Effective Width (C): 11.8 mm | Basic Dynamic Load Rating C: 10.4 kN | Basic Static Load Rating C0: 10.9 kN | Track Load Capacity (cylindrical): 5.98 kN | Track Load Capacity (spherical): 2.74 kN | Limit Speed: 13000 min⁻¹ | Mass: 58.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, R=spherical outer ring (R500) | Type: Separable (thick outer ring + inner ring + cage needle rollers) | |
| NAST15 | THK Separable Needle Roller Bearing NAST15, di=15mm, D=35mm, C=12.3kN | THK | Inner Diameter (di): 15 mm | Inner Contact Diameter (dr): 20 mm | Outer Diameter (D): 35 mm | Width (B): 12 mm | Effective Width (C): 11.8 mm | Basic Dynamic Load Rating C: 12.3 kN | Basic Static Load Rating C0: 14.3 kN | Track Load Capacity (cylindrical): 6.57 kN | Track Load Capacity (spherical): 3.14 kN | Limit Speed: 10000 min⁻¹ | Mass: 62.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, R=spherical outer ring (R500) | Type: Separable (thick outer ring + inner ring + cage needle rollers) | |
| NAST17 | THK Separable Needle Roller Bearing NAST17, di=17mm, D=40mm, C=17.4kN | THK | Inner Diameter (di): 17 mm | Inner Contact Diameter (dr): 22 mm | Outer Diameter (D): 40 mm | Width (B): 16 mm | Effective Width (C): 15.8 mm | Basic Dynamic Load Rating C: 17.4 kN | Basic Static Load Rating C0: 20.9 kN | Track Load Capacity (cylindrical): 10.9 kN | Track Load Capacity (spherical): 3.72 kN | Limit Speed: 9500 min⁻¹ | Mass: 110.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, R=spherical outer ring (R500) | Type: Separable (thick outer ring + inner ring + cage needle rollers) | |
| NAST20 | THK Separable Needle Roller Bearing NAST20, di=20mm, D=47mm, C=19.2kN | THK | Inner Diameter (di): 20 mm | Inner Contact Diameter (dr): 25 mm | Outer Diameter (D): 47 mm | Width (B): 16 mm | Effective Width (C): 15.8 mm | Basic Dynamic Load Rating C: 19.2 kN | Basic Static Load Rating C0: 24.5 kN | Track Load Capacity (cylindrical): 12.7 kN | Track Load Capacity (spherical): 4.61 kN | Limit Speed: 8500 min⁻¹ | Mass: 155.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, R=spherical outer ring (R500) | Type: Separable (thick outer ring + inner ring + cage needle rollers) | |
| NAST25 | THK Separable Needle Roller Bearing NAST25, di=25mm, D=52mm, C=20.7kN | THK | Inner Diameter (di): 25 mm | Inner Contact Diameter (dr): 30 mm | Outer Diameter (D): 52 mm | Width (B): 16 mm | Effective Width (C): 15.8 mm | Basic Dynamic Load Rating C: 20.7 kN | Basic Static Load Rating C0: 28.4 kN | Track Load Capacity (cylindrical): 14.1 kN | Track Load Capacity (spherical): 5.29 kN | Limit Speed: 7000 min⁻¹ | Mass: 180.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, R=spherical outer ring (R500) | Type: Separable (thick outer ring + inner ring + cage needle rollers) | |
| NAST30 | THK Separable Needle Roller Bearing NAST30, di=30mm, D=62mm, C=30.3kN | THK | Inner Diameter (di): 30 mm | Inner Contact Diameter (dr): 38 mm | Outer Diameter (D): 62 mm | Width (B): 20 mm | Effective Width (C): 19.8 mm | Basic Dynamic Load Rating C: 30.3 kN | Basic Static Load Rating C0: 45.4 kN | Track Load Capacity (cylindrical): 22.1 kN | Track Load Capacity (spherical): 6.66 kN | Limit Speed: 5500 min⁻¹ | Mass: 320.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, R=spherical outer ring (R500) | Type: Separable (thick outer ring + inner ring + cage needle rollers) | |
| NAST35 | THK Separable Needle Roller Bearing NAST35, di=35mm, D=72mm, C=32.2kN | THK | Inner Diameter (di): 35 mm | Inner Contact Diameter (dr): 42 mm | Outer Diameter (D): 72 mm | Width (B): 20 mm | Effective Width (C): 19.8 mm | Basic Dynamic Load Rating C: 32.2 kN | Basic Static Load Rating C0: 50.6 kN | Track Load Capacity (cylindrical): 25.7 kN | Track Load Capacity (spherical): 8.13 kN | Limit Speed: 5000 min⁻¹ | Mass: 440.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, R=spherical outer ring (R500) | Type: Separable (thick outer ring + inner ring + cage needle rollers) | |
| NAST40 | THK Separable Needle Roller Bearing NAST40, di=40mm, D=80mm, C=35.7kN | THK | Inner Diameter (di): 40 mm | Inner Contact Diameter (dr): 50 mm | Outer Diameter (D): 80 mm | Width (B): 20 mm | Effective Width (C): 19.8 mm | Basic Dynamic Load Rating C: 35.7 kN | Basic Static Load Rating C0: 61.6 kN | Track Load Capacity (cylindrical): 26.9 kN | Track Load Capacity (spherical): 9.31 kN | Limit Speed: 4000 min⁻¹ | Mass: 530.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, R=spherical outer ring (R500) | Type: Separable (thick outer ring + inner ring + cage needle rollers) | |
| NAST45 | THK Separable Needle Roller Bearing NAST45, di=45mm, D=85mm, C=37.1kN | THK | Inner Diameter (di): 45 mm | Inner Contact Diameter (dr): 55 mm | Outer Diameter (D): 85 mm | Width (B): 20 mm | Effective Width (C): 19.8 mm | Basic Dynamic Load Rating C: 37.1 kN | Basic Static Load Rating C0: 66.4 kN | Track Load Capacity (cylindrical): 28.5 kN | Track Load Capacity (spherical): 10.1 kN | Limit Speed: 4000 min⁻¹ | Mass: 580.0 g | Material: Carbon steel only (stainless not available) | Options: M=stainless, R=spherical outer ring (R500) | Type: Separable (thick outer ring + inner ring + cage needle rollers) | |
| NAST50 | THK Separable Needle Roller Bearing NAST50, di=50mm, D=90mm, C=38.7kN | THK | Inner Diameter (di): 50 mm | Inner Contact Diameter (dr): 60 mm | Outer Diameter (D): 90 mm | Width (B): 20 mm | Effective Width (C): 19.8 mm | Basic Dynamic Load Rating C: 38.7 kN | Basic Static Load Rating C0: 71.8 kN | Track Load Capacity (cylindrical): 30.2 kN | Track Load Capacity (spherical): 11.0 kN | Limit Speed: 3500 min⁻¹ | Mass: 635.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, R=spherical outer ring (R500) | Type: Separable (thick outer ring + inner ring + cage needle rollers) |
![[THK] — Separable Needle Roller Bearing NAST-ZZ (with Side Plates)](https://img.prosourcemro.com/2026/05/001-1058-300x300.png)
THK NAST-ZZ type Separable Needle Roller Bearing with side plates. Side plates on both sides of NAST inner ring form labyrinth seal for improved dust/contamination resistance. Inner diameter di = 6~50mm, outer diameter D = 19~90mm. Seal (UU) option available in addition to labyrinth side plates. NAST45ZZ: carbon steel only. Options: M (stainless, except NAST45ZZ), UU (seal), R (spherical outer ring R500).
THK NAST-ZZ type Separable Needle Roller Bearing with side plates. Side plates on both sides of NAST inner ring form labyrinth seal for improved dust/contamination resistance. Inner diameter di = 6~50mm, outer diameter D = 19~90mm. Seal (UU) option available in addition to labyrinth side plates. NAST45ZZ: carbon steel only. Options: M (stainless, except NAST45ZZ), UU (seal), R (spherical outer ring R500).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| NAST6ZZ | THK Needle Roller Bearing NAST6ZZ (side plates), di=6mm, D=19mm, C=4.12kN | THK | Inner Diameter (di): 6 mm | Outer Diameter (D): 19 mm | Width (B): 14 mm | Effective Width (C): 13.8 mm | Lube Port Diameter (a): 14.0 mm | Side Plate Thickness (e1): 2.5 mm | Basic Dynamic Load Rating C: 4.12 kN | Basic Static Load Rating C0: 4.55 kN | Track Load Capacity (cylindrical): 3.53 kN | Track Load Capacity (spherical): 1.37 kN | Limit Speed: 20000 min⁻¹ | Mass: 24.5 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, UU=seal, R=spherical outer ring (R500) | Type: Separable with side plates (labyrinth seal) | |
| NAST8ZZ | THK Needle Roller Bearing NAST8ZZ (side plates), di=8mm, D=24mm, C=5.68kN | THK | Inner Diameter (di): 8 mm | Outer Diameter (D): 24 mm | Width (B): 14 mm | Effective Width (C): 13.8 mm | Lube Port Diameter (a): 17.5 mm | Side Plate Thickness (e1): 2.5 mm | Basic Dynamic Load Rating C: 5.68 kN | Basic Static Load Rating C0: 5.89 kN | Track Load Capacity (cylindrical): 4.51 kN | Track Load Capacity (spherical): 1.86 kN | Limit Speed: 17000 min⁻¹ | Mass: 39.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, UU=seal, R=spherical outer ring (R500) | Type: Separable with side plates (labyrinth seal) | |
| NAST10ZZ | THK Needle Roller Bearing NAST10ZZ (side plates), di=10mm, D=30mm, C=9.7kN | THK | Inner Diameter (di): 10 mm | Outer Diameter (D): 30 mm | Width (B): 16 mm | Effective Width (C): 15.8 mm | Lube Port Diameter (a): 23.5 mm | Side Plate Thickness (e1): 2.5 mm | Basic Dynamic Load Rating C: 9.7 kN | Basic Static Load Rating C0: 9.67 kN | Track Load Capacity (cylindrical): 6.86 kN | Track Load Capacity (spherical): 2.45 kN | Limit Speed: 15000 min⁻¹ | Mass: 65.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, UU=seal, R=spherical outer ring (R500) | Type: Separable with side plates (labyrinth seal) | |
| NAST12ZZ | THK Needle Roller Bearing NAST12ZZ (side plates), di=12mm, D=32mm, C=10.4kN | THK | Inner Diameter (di): 12 mm | Outer Diameter (D): 32 mm | Width (B): 16 mm | Effective Width (C): 15.8 mm | Lube Port Diameter (a): 25.5 mm | Side Plate Thickness (e1): 2.5 mm | Basic Dynamic Load Rating C: 10.4 kN | Basic Static Load Rating C0: 10.9 kN | Track Load Capacity (cylindrical): 7.35 kN | Track Load Capacity (spherical): 2.74 kN | Limit Speed: 13000 min⁻¹ | Mass: 75.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, UU=seal, R=spherical outer ring (R500) | Type: Separable with side plates (labyrinth seal) | |
| NAST15ZZ | THK Needle Roller Bearing NAST15ZZ (side plates), di=15mm, D=35mm, C=12.3kN | THK | Inner Diameter (di): 15 mm | Outer Diameter (D): 35 mm | Width (B): 16 mm | Effective Width (C): 15.8 mm | Lube Port Diameter (a): 29.0 mm | Side Plate Thickness (e1): 2.5 mm | Basic Dynamic Load Rating C: 12.3 kN | Basic Static Load Rating C0: 14.3 kN | Track Load Capacity (cylindrical): 8.04 kN | Track Load Capacity (spherical): 3.14 kN | Limit Speed: 10000 min⁻¹ | Mass: 83.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, UU=seal, R=spherical outer ring (R500) | Type: Separable with side plates (labyrinth seal) | |
| NAST17ZZ | THK Needle Roller Bearing NAST17ZZ (side plates), di=17mm, D=40mm, C=17.4kN | THK | Inner Diameter (di): 17 mm | Outer Diameter (D): 40 mm | Width (B): 20 mm | Effective Width (C): 19.8 mm | Lube Port Diameter (a): 32.5 mm | Side Plate Thickness (e1): 3.0 mm | Basic Dynamic Load Rating C: 17.4 kN | Basic Static Load Rating C0: 20.9 kN | Track Load Capacity (cylindrical): 11.8 kN | Track Load Capacity (spherical): 3.72 kN | Limit Speed: 9500 min⁻¹ | Mass: 135.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, UU=seal, R=spherical outer ring (R500) | Type: Separable with side plates (labyrinth seal) | |
| NAST20ZZ | THK Needle Roller Bearing NAST20ZZ (side plates), di=20mm, D=47mm, C=19.2kN | THK | Inner Diameter (di): 20 mm | Outer Diameter (D): 47 mm | Width (B): 20 mm | Effective Width (C): 19.8 mm | Lube Port Diameter (a): 38.0 mm | Side Plate Thickness (e1): 3.0 mm | Basic Dynamic Load Rating C: 19.2 kN | Basic Static Load Rating C0: 24.5 kN | Track Load Capacity (cylindrical): 13.8 kN | Track Load Capacity (spherical): 4.61 kN | Limit Speed: 8500 min⁻¹ | Mass: 195.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, UU=seal, R=spherical outer ring (R500) | Type: Separable with side plates (labyrinth seal) | |
| NAST25ZZ | THK Needle Roller Bearing NAST25ZZ (side plates), di=25mm, D=52mm, C=20.7kN | THK | Inner Diameter (di): 25 mm | Outer Diameter (D): 52 mm | Width (B): 20 mm | Effective Width (C): 19.8 mm | Lube Port Diameter (a): 43.0 mm | Side Plate Thickness (e1): 3.0 mm | Basic Dynamic Load Rating C: 20.7 kN | Basic Static Load Rating C0: 28.4 kN | Track Load Capacity (cylindrical): 15.3 kN | Track Load Capacity (spherical): 5.29 kN | Limit Speed: 7000 min⁻¹ | Mass: 225.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, UU=seal, R=spherical outer ring (R500) | Type: Separable with side plates (labyrinth seal) | |
| NAST30ZZ | THK Needle Roller Bearing NAST30ZZ (side plates), di=30mm, D=62mm, C=30.3kN | THK | Inner Diameter (di): 30 mm | Outer Diameter (D): 62 mm | Width (B): 25 mm | Effective Width (C): 24.8 mm | Lube Port Diameter (a): 50.5 mm | Side Plate Thickness (e1): 4.0 mm | Basic Dynamic Load Rating C: 30.3 kN | Basic Static Load Rating C0: 45.4 kN | Track Load Capacity (cylindrical): 22.1 kN | Track Load Capacity (spherical): 6.66 kN | Limit Speed: 5500 min⁻¹ | Mass: 400.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, UU=seal, R=spherical outer ring (R500) | Type: Separable with side plates (labyrinth seal) | |
| NAST35ZZ | THK Needle Roller Bearing NAST35ZZ (side plates), di=35mm, D=72mm, C=32.2kN | THK | Inner Diameter (di): 35 mm | Outer Diameter (D): 72 mm | Width (B): 25 mm | Effective Width (C): 24.8 mm | Lube Port Diameter (a): 53.5 mm | Side Plate Thickness (e1): 4.0 mm | Basic Dynamic Load Rating C: 32.2 kN | Basic Static Load Rating C0: 50.6 kN | Track Load Capacity (cylindrical): 25.7 kN | Track Load Capacity (spherical): 8.13 kN | Limit Speed: 5000 min⁻¹ | Mass: 550.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, UU=seal, R=spherical outer ring (R500) | Type: Separable with side plates (labyrinth seal) | |
| NAST40ZZ | THK Needle Roller Bearing NAST40ZZ (side plates), di=40mm, D=80mm, C=35.7kN | THK | Inner Diameter (di): 40 mm | Outer Diameter (D): 80 mm | Width (B): 26 mm | Effective Width (C): 25.8 mm | Lube Port Diameter (a): 61.5 mm | Side Plate Thickness (e1): 4.0 mm | Basic Dynamic Load Rating C: 35.7 kN | Basic Static Load Rating C0: 61.6 kN | Track Load Capacity (cylindrical): 30.3 kN | Track Load Capacity (spherical): 9.31 kN | Limit Speed: 4000 min⁻¹ | Mass: 710.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, UU=seal, R=spherical outer ring (R500) | Type: Separable with side plates (labyrinth seal) | |
| NAST45ZZ | THK Needle Roller Bearing NAST45ZZ (side plates), di=45mm, D=85mm, C=37.1kN | THK | Inner Diameter (di): 45 mm | Outer Diameter (D): 85 mm | Width (B): 26 mm | Effective Width (C): 25.8 mm | Lube Port Diameter (a): 66.5 mm | Side Plate Thickness (e1): 4.0 mm | Basic Dynamic Load Rating C: 37.1 kN | Basic Static Load Rating C0: 66.4 kN | Track Load Capacity (cylindrical): 31.1 kN | Track Load Capacity (spherical): 10.1 kN | Limit Speed: 4000 min⁻¹ | Mass: 760.0 g | Material: Carbon steel only (stainless not available) | Options: M=stainless, UU=seal, R=spherical outer ring (R500) | Type: Separable with side plates (labyrinth seal) | |
| NAST50ZZ | THK Needle Roller Bearing NAST50ZZ (side plates), di=50mm, D=90mm, C=38.7kN | THK | Inner Diameter (di): 50 mm | Outer Diameter (D): 90 mm | Width (B): 26 mm | Effective Width (C): 25.8 mm | Lube Port Diameter (a): 76.0 mm | Side Plate Thickness (e1): 4.0 mm | Basic Dynamic Load Rating C: 38.7 kN | Basic Static Load Rating C0: 71.8 kN | Track Load Capacity (cylindrical): 34.0 kN | Track Load Capacity (spherical): 11.0 kN | Limit Speed: 3500 min⁻¹ | Mass: 830.0 g | Material: Carbon steel or stainless (M option) | Options: M=stainless, UU=seal, R=spherical outer ring (R500) | Type: Separable with side plates (labyrinth seal) |
![[THK] — Spherical Plain Bearing PB (Standard Type)](https://img.prosourcemro.com/2026/05/001-1069-300x300.png)
THK PB type Spherical Plain Bearing, standard series. Steel outer ring with lubrication groove and oil port. Spherical inner ring (SUJ2, 58HRC+, hard chrome on spherical surface) with bronze alloy bushing. High rigidity, excellent corrosion and wear resistance. Inner diameter d = 5~30mm, ball diameter 11.112~50.8mm (7/16"~2"). Shaft fit (inner ring rotation): m6 normal / n6 indeterminate. Housing fit (inner ring rotation): H7.
THK PB type Spherical Plain Bearing, standard series. Steel outer ring with lubrication groove and oil port. Spherical inner ring (SUJ2, 58HRC+, hard chrome on spherical surface) with bronze alloy bushing. High rigidity, excellent corrosion and wear resistance. Inner diameter d = 5~30mm, ball diameter 11.112~50.8mm (7/16"~2"). Shaft fit (inner ring rotation): m6 normal / n6 indeterminate. Housing fit (inner ring rotation): H7.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| PB5 | THK Spherical Bearing PB5, d=5mm, D=16mm, Da=11.112mm, Cs=7840N | THK | Inner Diameter (d): 5 mm | Outer Diameter (D): 16 mm | Outer Ring Width (B): 6.0 mm | Inner Ring Width (B1): 8 mm | Ball Diameter (Da): 11.112 mm (7/16") | Allowable Tilt Angle α1/α2/α3: 8°/13°/30° | Radial Clearance: ≤0.3 mm | Static Load Capacity (Cs): 7840 N | Mass: 8.5 g | Outer Ring Material: S35C | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit (inner ring rotation): m6 normal / n6 indeterminate | Housing Fit (inner ring rotation): H7 | |
| PB6 | THK Spherical Bearing PB6, d=6mm, D=18mm, Da=12.7mm, Cs=9800N | THK | Inner Diameter (d): 6 mm | Outer Diameter (D): 18 mm | Outer Ring Width (B): 6.75 mm | Inner Ring Width (B1): 9 mm | Ball Diameter (Da): 12.7 mm (1/2") | Allowable Tilt Angle α1/α2/α3: 8°/13°/30° | Radial Clearance: ≤0.3 mm | Static Load Capacity (Cs): 9800 N | Mass: 13.0 g | Outer Ring Material: S35C | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit (inner ring rotation): m6 normal / n6 indeterminate | Housing Fit (inner ring rotation): H7 | |
| PB8 | THK Spherical Bearing PB8, d=8mm, D=22mm, Da=15.875mm, Cs=16700N | THK | Inner Diameter (d): 8 mm | Outer Diameter (D): 22 mm | Outer Ring Width (B): 9.0 mm | Inner Ring Width (B1): 12 mm | Ball Diameter (Da): 15.875 mm (5/8") | Allowable Tilt Angle α1/α2/α3: 8°/14°/25° | Radial Clearance: ≤0.5 mm | Static Load Capacity (Cs): 16700 N | Mass: 24.0 g | Outer Ring Material: S35C | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit (inner ring rotation): m6 normal / n6 indeterminate | Housing Fit (inner ring rotation): H7 | |
| PB10 | THK Spherical Bearing PB10, d=10mm, D=26mm, Da=19.05mm, Cs=23500N | THK | Inner Diameter (d): 10 mm | Outer Diameter (D): 26 mm | Outer Ring Width (B): 10.5 mm | Inner Ring Width (B1): 14 mm | Ball Diameter (Da): 19.05 mm (3/4") | Allowable Tilt Angle α1/α2/α3: 8°/14°/25° | Radial Clearance: ≤0.5 mm | Static Load Capacity (Cs): 23500 N | Mass: 39.0 g | Outer Ring Material: S35C | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit (inner ring rotation): m6 normal / n6 indeterminate | Housing Fit (inner ring rotation): H7 | |
| PB12 | THK Spherical Bearing PB12, d=12mm, D=30mm, Da=22.225mm, Cs=31400N | THK | Inner Diameter (d): 12 mm | Outer Diameter (D): 30 mm | Outer Ring Width (B): 12.0 mm | Inner Ring Width (B1): 16 mm | Ball Diameter (Da): 22.225 mm (7/8") | Allowable Tilt Angle α1/α2/α3: 8°/13°/25° | Radial Clearance: ≤0.5 mm | Static Load Capacity (Cs): 31400 N | Mass: 58.0 g | Outer Ring Material: S35C | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit (inner ring rotation): m6 normal / n6 indeterminate | Housing Fit (inner ring rotation): H7 | |
| PB14 | THK Spherical Bearing PB14, d=14mm, D=34mm, Da=25.4mm, Cs=40200N | THK | Inner Diameter (d): 14 mm | Outer Diameter (D): 34 mm | Outer Ring Width (B): 13.5 mm | Inner Ring Width (B1): 19 mm | Ball Diameter (Da): 25.4 mm (1") | Allowable Tilt Angle α1/α2/α3: 10°/16°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 40200 N | Mass: 84.0 g | Outer Ring Material: S35C | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit (inner ring rotation): m6 normal / n6 indeterminate | Housing Fit (inner ring rotation): H7 | |
| PB16 | THK Spherical Bearing PB16, d=16mm, D=38mm, Da=28.575mm, Cs=50000N | THK | Inner Diameter (d): 16 mm | Outer Diameter (D): 38 mm | Outer Ring Width (B): 15.0 mm | Inner Ring Width (B1): 21 mm | Ball Diameter (Da): 28.575 mm (1-1/8") | Allowable Tilt Angle α1/α2/α3: 9°/15°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 50000 N | Mass: 111.0 g | Outer Ring Material: S35C | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit (inner ring rotation): m6 normal / n6 indeterminate | Housing Fit (inner ring rotation): H7 | |
| PB18 | THK Spherical Bearing PB18, d=18mm, D=42mm, Da=31.75mm, Cs=61800N | THK | Inner Diameter (d): 18 mm | Outer Diameter (D): 42 mm | Outer Ring Width (B): 16.5 mm | Inner Ring Width (B1): 23 mm | Ball Diameter (Da): 31.75 mm (1-1/4") | Allowable Tilt Angle α1/α2/α3: 9°/15°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 61800 N | Mass: 160.0 g | Outer Ring Material: S35C | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit (inner ring rotation): m6 normal / n6 indeterminate | Housing Fit (inner ring rotation): H7 | |
| PB20 | THK Spherical Bearing PB20, d=20mm, D=46mm, Da=34.925mm, Cs=73500N | THK | Inner Diameter (d): 20 mm | Outer Diameter (D): 46 mm | Outer Ring Width (B): 18.0 mm | Inner Ring Width (B1): 25 mm | Ball Diameter (Da): 34.925 mm (1-3/8") | Allowable Tilt Angle α1/α2/α3: 9°/15°/24° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 73500 N | Mass: 210.0 g | Outer Ring Material: S35C | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit (inner ring rotation): m6 normal / n6 indeterminate | Housing Fit (inner ring rotation): H7 | |
| PB22 | THK Spherical Bearing PB22, d=22mm, D=50mm, Da=38.1mm, Cs=88200N | THK | Inner Diameter (d): 22 mm | Outer Diameter (D): 50 mm | Outer Ring Width (B): 20.0 mm | Inner Ring Width (B1): 28 mm | Ball Diameter (Da): 38.1 mm (1-1/2") | Allowable Tilt Angle α1/α2/α3: 10°/15°/23° | Radial Clearance: ≤0.7 mm | Static Load Capacity (Cs): 88200 N | Mass: 265.0 g | Outer Ring Material: S35C | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit (inner ring rotation): m6 normal / n6 indeterminate | Housing Fit (inner ring rotation): H7 | |
| PB25 | THK Spherical Bearing PB25, d=25mm, D=56mm, Da=42.862mm, Cs=111000N | THK | Inner Diameter (d): 25 mm | Outer Diameter (D): 56 mm | Outer Ring Width (B): 22.0 mm | Inner Ring Width (B1): 31 mm | Ball Diameter (Da): 42.862 mm (1-11/16") | Allowable Tilt Angle α1/α2/α3: 9°/15°/23° | Radial Clearance: ≤0.8 mm | Static Load Capacity (Cs): 111000 N | Mass: 390.0 g | Outer Ring Material: S35C | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit (inner ring rotation): m6 normal / n6 indeterminate | Housing Fit (inner ring rotation): H7 | |
| PB30 | THK Spherical Bearing PB30, d=30mm, D=66mm, Da=50.8mm, Cs=148000N | THK | Inner Diameter (d): 30 mm | Outer Diameter (D): 66 mm | Outer Ring Width (B): 25.0 mm | Inner Ring Width (B1): 37 mm | Ball Diameter (Da): 50.8 mm (2") | Allowable Tilt Angle α1/α2/α3: 10°/17°/23° | Radial Clearance: ≤0.8 mm | Static Load Capacity (Cs): 148000 N | Mass: 610.0 g | Outer Ring Material: S35C | Inner Ring: SUJ2 58HRC+ (hard chrome on spherical surface) | Bushing: Bronze alloy | Shaft Fit (inner ring rotation): m6 normal / n6 indeterminate | Housing Fit (inner ring rotation): H7 |
![[THK] — Spherical Plain Bearing SA1 (Standard)](https://img.prosourcemro.com/2026/05/001-1061-300x300.png)
THK SA1 type Spherical Plain Bearing, standard (no seal). European series; compact width and thin section vs SB type. Outer ring split at 1 point (2 points for d≥100mm). Inner diameter d = 12~240mm. Seal type (SA1UU) also available.
THK SA1 type Spherical Plain Bearing, standard (no seal). European series; compact width and thin section vs SB type. Outer ring split at 1 point (2 points for d≥100mm). Inner diameter d = 12~240mm. Seal type (SA1UU) also available.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| SA112 | THK Spherical Plain Bearing SA112, d=12mm, D=22mm, C=2.94kN | THK | Inner Diameter (d): 12 mm | Outer Diameter (D): 22 mm | Outer Ring Width (B): 7 mm | Inner Ring Width (B1): 10 mm | Basic Dynamic Load Rating C: 2.94 kN | Basic Static Load Rating C0: 74.1 kN | Mass: 0.017 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA115 | THK Spherical Plain Bearing SA115, d=15mm, D=26mm, C=4.7kN | THK | Inner Diameter (d): 15 mm | Outer Diameter (D): 26 mm | Outer Ring Width (B): 9 mm | Inner Ring Width (B1): 12 mm | Basic Dynamic Load Rating C: 4.7 kN | Basic Static Load Rating C0: 117.0 kN | Mass: 0.032 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA117 | THK Spherical Plain Bearing SA117, d=17mm, D=30mm, C=5.88kN | THK | Inner Diameter (d): 17 mm | Outer Diameter (D): 30 mm | Outer Ring Width (B): 10 mm | Inner Ring Width (B1): 14 mm | Basic Dynamic Load Rating C: 5.88 kN | Basic Static Load Rating C0: 147.0 kN | Mass: 0.049 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA120 | THK Spherical Plain Bearing SA120, d=20mm, D=35mm, C=8.23kN | THK | Inner Diameter (d): 20 mm | Outer Diameter (D): 35 mm | Outer Ring Width (B): 12 mm | Inner Ring Width (B1): 16 mm | Basic Dynamic Load Rating C: 8.23 kN | Basic Static Load Rating C0: 205.0 kN | Mass: 0.065 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA125 | THK Spherical Plain Bearing SA125, d=25mm, D=42mm, C=13.3kN | THK | Inner Diameter (d): 25 mm | Outer Diameter (D): 42 mm | Outer Ring Width (B): 16 mm | Inner Ring Width (B1): 20 mm | Basic Dynamic Load Rating C: 13.3 kN | Basic Static Load Rating C0: 334.0 kN | Mass: 0.115 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA130 | THK Spherical Plain Bearing SA130, d=30mm, D=47mm, C=17.3kN | THK | Inner Diameter (d): 30 mm | Outer Diameter (D): 47 mm | Outer Ring Width (B): 18 mm | Inner Ring Width (B1): 22 mm | Basic Dynamic Load Rating C: 17.3 kN | Basic Static Load Rating C0: 431.0 kN | Mass: 0.16 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA135 | THK Spherical Plain Bearing SA135, d=35mm, D=55mm, C=22.1kN | THK | Inner Diameter (d): 35 mm | Outer Diameter (D): 55 mm | Outer Ring Width (B): 20 mm | Inner Ring Width (B1): 25 mm | Basic Dynamic Load Rating C: 22.1 kN | Basic Static Load Rating C0: 553.0 kN | Mass: 0.258 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA140 | THK Spherical Plain Bearing SA140, d=40mm, D=62mm, C=27.5kN | THK | Inner Diameter (d): 40 mm | Outer Diameter (D): 62 mm | Outer Ring Width (B): 22 mm | Inner Ring Width (B1): 28 mm | Basic Dynamic Load Rating C: 27.5 kN | Basic Static Load Rating C0: 686.0 kN | Mass: 0.315 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA145 | THK Spherical Plain Bearing SA145, d=45mm, D=68mm, C=35.3kN | THK | Inner Diameter (d): 45 mm | Outer Diameter (D): 68 mm | Outer Ring Width (B): 25 mm | Inner Ring Width (B1): 32 mm | Basic Dynamic Load Rating C: 35.3 kN | Basic Static Load Rating C0: 882.0 kN | Mass: 0.413 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA150 | THK Spherical Plain Bearing SA150, d=50mm, D=75mm, C=43.5kN | THK | Inner Diameter (d): 50 mm | Outer Diameter (D): 75 mm | Outer Ring Width (B): 28 mm | Inner Ring Width (B1): 35 mm | Basic Dynamic Load Rating C: 43.5 kN | Basic Static Load Rating C0: 1090.0 kN | Mass: 0.56 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA160 | THK Spherical Plain Bearing SA160, d=60mm, D=90mm, C=67.7kN | THK | Inner Diameter (d): 60 mm | Outer Diameter (D): 90 mm | Outer Ring Width (B): 36 mm | Inner Ring Width (B1): 44 mm | Basic Dynamic Load Rating C: 67.7 kN | Basic Static Load Rating C0: 1700.0 kN | Mass: 1.1 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA170 | THK Spherical Plain Bearing SA170, d=70mm, D=105mm, C=86.6kN | THK | Inner Diameter (d): 70 mm | Outer Diameter (D): 105 mm | Outer Ring Width (B): 40 mm | Inner Ring Width (B1): 49 mm | Basic Dynamic Load Rating C: 86.6 kN | Basic Static Load Rating C0: 2170.0 kN | Mass: 1.54 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA180 | THK Spherical Plain Bearing SA180, d=80mm, D=120mm, C=111.0kN | THK | Inner Diameter (d): 80 mm | Outer Diameter (D): 120 mm | Outer Ring Width (B): 45 mm | Inner Ring Width (B1): 55 mm | Basic Dynamic Load Rating C: 111.0 kN | Basic Static Load Rating C0: 2780.0 kN | Mass: 2.29 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA190 | THK Spherical Plain Bearing SA190, d=90mm, D=130mm, C=135.0kN | THK | Inner Diameter (d): 90 mm | Outer Diameter (D): 130 mm | Outer Ring Width (B): 50 mm | Inner Ring Width (B1): 60 mm | Basic Dynamic Load Rating C: 135.0 kN | Basic Static Load Rating C0: 3380.0 kN | Mass: 2.84 kg | Outer Ring: Outer ring 1-point split | Seal: None | |
| SA1100 | THK Spherical Plain Bearing SA1100, d=100mm, D=150mm, C=169.0kN | THK | Inner Diameter (d): 100 mm | Outer Diameter (D): 150 mm | Outer Ring Width (B): 55 mm | Inner Ring Width (B1): 70 mm | Basic Dynamic Load Rating C: 169.0 kN | Basic Static Load Rating C0: 4210.0 kN | Mass: 4.43 kg | Outer Ring: Outer ring 2-point split | Seal: None | |
| SA1110 | THK Spherical Plain Bearing SA1110, d=110mm, D=160mm, C=181.0kN | THK | Inner Diameter (d): 110 mm | Outer Diameter (D): 160 mm | Outer Ring Width (B): 55 mm | Inner Ring Width (B1): 70 mm | Basic Dynamic Load Rating C: 181.0 kN | Basic Static Load Rating C0: 4530.0 kN | Mass: 4.94 kg | Outer Ring: Outer ring 2-point split | Seal: None | |
| SA1120 | THK Spherical Plain Bearing SA1120, d=120mm, D=180mm, C=264.0kN | THK | Inner Diameter (d): 120 mm | Outer Diameter (D): 180 mm | Outer Ring Width (B): 70 mm | Inner Ring Width (B1): 85 mm | Basic Dynamic Load Rating C: 264.0 kN | Basic Static Load Rating C0: 6590.0 kN | Mass: 8.12 kg | Outer Ring: Outer ring 2-point split | Seal: None | |
| SA1140 | THK Spherical Plain Bearing SA1140, d=140mm, D=210mm, C=296.0kN | THK | Inner Diameter (d): 140 mm | Outer Diameter (D): 210 mm | Outer Ring Width (B): 70 mm | Inner Ring Width (B1): 90 mm | Basic Dynamic Load Rating C: 296.0 kN | Basic Static Load Rating C0: 7410.0 kN | Mass: 11.3 kg | Outer Ring: Outer ring 2-point split | Seal: None | |
| SA1160 | THK Spherical Plain Bearing SA1160, d=160mm, D=230mm, C=376.0kN | THK | Inner Diameter (d): 160 mm | Outer Diameter (D): 230 mm | Outer Ring Width (B): 80 mm | Inner Ring Width (B1): 105 mm | Basic Dynamic Load Rating C: 376.0 kN | Basic Static Load Rating C0: 9410.0 kN | Mass: 14.4 kg | Outer Ring: Outer ring 2-point split | Seal: None | |
| SA1180 | THK Spherical Plain Bearing SA1180, d=180mm, D=260mm, C=424.0kN | THK | Inner Diameter (d): 180 mm | Outer Diameter (D): 260 mm | Outer Ring Width (B): 80 mm | Inner Ring Width (B1): 105 mm | Basic Dynamic Load Rating C: 424.0 kN | Basic Static Load Rating C0: 10600.0 kN | Mass: 18.9 kg | Outer Ring: Outer ring 2-point split | Seal: None | |
| SA1200 | THK Spherical Plain Bearing SA1200, d=200mm, D=290mm, C=588.0kN | THK | Inner Diameter (d): 200 mm | Outer Diameter (D): 290 mm | Outer Ring Width (B): 100 mm | Inner Ring Width (B1): 130 mm | Basic Dynamic Load Rating C: 588.0 kN | Basic Static Load Rating C0: 14700.0 kN | Mass: 28.1 kg | Outer Ring: Outer ring 2-point split | Seal: None | |
| SA1220 | THK Spherical Plain Bearing SA1220, d=220mm, D=320mm, C=647.0kN | THK | Inner Diameter (d): 220 mm | Outer Diameter (D): 320 mm | Outer Ring Width (B): 100 mm | Inner Ring Width (B1): 135 mm | Basic Dynamic Load Rating C: 647.0 kN | Basic Static Load Rating C0: 16200.0 kN | Mass: 36.1 kg | Outer Ring: Outer ring 2-point split | Seal: None | |
| SA1240 | THK Spherical Plain Bearing SA1240, d=240mm, D=340mm, C=706.0kN | THK | Inner Diameter (d): 240 mm | Outer Diameter (D): 340 mm | Outer Ring Width (B): 100 mm | Inner Ring Width (B1): 140 mm | Basic Dynamic Load Rating C: 706.0 kN | Basic Static Load Rating C0: 17600.0 kN | Mass: 40.4 kg | Outer Ring: Outer ring 2-point split | Seal: None |
THK SA1UU type Spherical Plain Bearing with high dust-protection seals. European series; compact width and thin section vs SB type. Outer ring split at 1 point (2 points for d≥100mm). Inner diameter d = 12~240mm. Standard type (SA1, no seal) also available.
THK SA1UU type Spherical Plain Bearing with high dust-protection seals. European series; compact width and thin section vs SB type. Outer ring split at 1 point (2 points for d≥100mm). Inner diameter d = 12~240mm. Standard type (SA1, no seal) also available.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| SA112UU | THK Spherical Plain Bearing SA112UU (sealed), d=12mm, D=22mm, C=2.94kN | THK | Inner Diameter (d): 12 mm | Outer Diameter (D): 22 mm | Outer Ring Width (B): 7 mm | Inner Ring Width (B1): 10 mm | Basic Dynamic Load Rating C: 2.94 kN | Basic Static Load Rating C0: 74.1 kN | Mass: 0.017 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA115UU | THK Spherical Plain Bearing SA115UU (sealed), d=15mm, D=26mm, C=4.7kN | THK | Inner Diameter (d): 15 mm | Outer Diameter (D): 26 mm | Outer Ring Width (B): 9 mm | Inner Ring Width (B1): 12 mm | Basic Dynamic Load Rating C: 4.7 kN | Basic Static Load Rating C0: 117.0 kN | Mass: 0.032 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA117UU | THK Spherical Plain Bearing SA117UU (sealed), d=17mm, D=30mm, C=5.88kN | THK | Inner Diameter (d): 17 mm | Outer Diameter (D): 30 mm | Outer Ring Width (B): 10 mm | Inner Ring Width (B1): 14 mm | Basic Dynamic Load Rating C: 5.88 kN | Basic Static Load Rating C0: 147.0 kN | Mass: 0.049 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA120UU | THK Spherical Plain Bearing SA120UU (sealed), d=20mm, D=35mm, C=8.23kN | THK | Inner Diameter (d): 20 mm | Outer Diameter (D): 35 mm | Outer Ring Width (B): 12 mm | Inner Ring Width (B1): 16 mm | Basic Dynamic Load Rating C: 8.23 kN | Basic Static Load Rating C0: 205.0 kN | Mass: 0.065 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA125UU | THK Spherical Plain Bearing SA125UU (sealed), d=25mm, D=42mm, C=13.3kN | THK | Inner Diameter (d): 25 mm | Outer Diameter (D): 42 mm | Outer Ring Width (B): 16 mm | Inner Ring Width (B1): 20 mm | Basic Dynamic Load Rating C: 13.3 kN | Basic Static Load Rating C0: 334.0 kN | Mass: 0.115 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA130UU | THK Spherical Plain Bearing SA130UU (sealed), d=30mm, D=47mm, C=17.3kN | THK | Inner Diameter (d): 30 mm | Outer Diameter (D): 47 mm | Outer Ring Width (B): 18 mm | Inner Ring Width (B1): 22 mm | Basic Dynamic Load Rating C: 17.3 kN | Basic Static Load Rating C0: 431.0 kN | Mass: 0.16 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA135UU | THK Spherical Plain Bearing SA135UU (sealed), d=35mm, D=55mm, C=22.1kN | THK | Inner Diameter (d): 35 mm | Outer Diameter (D): 55 mm | Outer Ring Width (B): 20 mm | Inner Ring Width (B1): 25 mm | Basic Dynamic Load Rating C: 22.1 kN | Basic Static Load Rating C0: 553.0 kN | Mass: 0.258 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA140UU | THK Spherical Plain Bearing SA140UU (sealed), d=40mm, D=62mm, C=27.5kN | THK | Inner Diameter (d): 40 mm | Outer Diameter (D): 62 mm | Outer Ring Width (B): 22 mm | Inner Ring Width (B1): 28 mm | Basic Dynamic Load Rating C: 27.5 kN | Basic Static Load Rating C0: 686.0 kN | Mass: 0.315 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA145UU | THK Spherical Plain Bearing SA145UU (sealed), d=45mm, D=68mm, C=35.3kN | THK | Inner Diameter (d): 45 mm | Outer Diameter (D): 68 mm | Outer Ring Width (B): 25 mm | Inner Ring Width (B1): 32 mm | Basic Dynamic Load Rating C: 35.3 kN | Basic Static Load Rating C0: 882.0 kN | Mass: 0.413 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA150UU | THK Spherical Plain Bearing SA150UU (sealed), d=50mm, D=75mm, C=43.5kN | THK | Inner Diameter (d): 50 mm | Outer Diameter (D): 75 mm | Outer Ring Width (B): 28 mm | Inner Ring Width (B1): 35 mm | Basic Dynamic Load Rating C: 43.5 kN | Basic Static Load Rating C0: 1090.0 kN | Mass: 0.56 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA160UU | THK Spherical Plain Bearing SA160UU (sealed), d=60mm, D=90mm, C=67.7kN | THK | Inner Diameter (d): 60 mm | Outer Diameter (D): 90 mm | Outer Ring Width (B): 36 mm | Inner Ring Width (B1): 44 mm | Basic Dynamic Load Rating C: 67.7 kN | Basic Static Load Rating C0: 1700.0 kN | Mass: 1.1 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA170UU | THK Spherical Plain Bearing SA170UU (sealed), d=70mm, D=105mm, C=86.6kN | THK | Inner Diameter (d): 70 mm | Outer Diameter (D): 105 mm | Outer Ring Width (B): 40 mm | Inner Ring Width (B1): 49 mm | Basic Dynamic Load Rating C: 86.6 kN | Basic Static Load Rating C0: 2170.0 kN | Mass: 1.54 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA180UU | THK Spherical Plain Bearing SA180UU (sealed), d=80mm, D=120mm, C=111.0kN | THK | Inner Diameter (d): 80 mm | Outer Diameter (D): 120 mm | Outer Ring Width (B): 45 mm | Inner Ring Width (B1): 55 mm | Basic Dynamic Load Rating C: 111.0 kN | Basic Static Load Rating C0: 2780.0 kN | Mass: 2.29 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA190UU | THK Spherical Plain Bearing SA190UU (sealed), d=90mm, D=130mm, C=135.0kN | THK | Inner Diameter (d): 90 mm | Outer Diameter (D): 130 mm | Outer Ring Width (B): 50 mm | Inner Ring Width (B1): 60 mm | Basic Dynamic Load Rating C: 135.0 kN | Basic Static Load Rating C0: 3380.0 kN | Mass: 2.84 kg | Outer Ring: Outer ring 1-point split | Seal: UU (double seal, high dust protection) | |
| SA1100UU | THK Spherical Plain Bearing SA1100UU (sealed), d=100mm, D=150mm, C=169.0kN | THK | Inner Diameter (d): 100 mm | Outer Diameter (D): 150 mm | Outer Ring Width (B): 55 mm | Inner Ring Width (B1): 70 mm | Basic Dynamic Load Rating C: 169.0 kN | Basic Static Load Rating C0: 4210.0 kN | Mass: 4.43 kg | Outer Ring: Outer ring 2-point split | Seal: UU (double seal, high dust protection) | |
| SA1110UU | THK Spherical Plain Bearing SA1110UU (sealed), d=110mm, D=160mm, C=181.0kN | THK | Inner Diameter (d): 110 mm | Outer Diameter (D): 160 mm | Outer Ring Width (B): 55 mm | Inner Ring Width (B1): 70 mm | Basic Dynamic Load Rating C: 181.0 kN | Basic Static Load Rating C0: 4530.0 kN | Mass: 4.94 kg | Outer Ring: Outer ring 2-point split | Seal: UU (double seal, high dust protection) | |
| SA1120UU | THK Spherical Plain Bearing SA1120UU (sealed), d=120mm, D=180mm, C=264.0kN | THK | Inner Diameter (d): 120 mm | Outer Diameter (D): 180 mm | Outer Ring Width (B): 70 mm | Inner Ring Width (B1): 85 mm | Basic Dynamic Load Rating C: 264.0 kN | Basic Static Load Rating C0: 6590.0 kN | Mass: 8.12 kg | Outer Ring: Outer ring 2-point split | Seal: UU (double seal, high dust protection) | |
| SA1140UU | THK Spherical Plain Bearing SA1140UU (sealed), d=140mm, D=210mm, C=296.0kN | THK | Inner Diameter (d): 140 mm | Outer Diameter (D): 210 mm | Outer Ring Width (B): 70 mm | Inner Ring Width (B1): 90 mm | Basic Dynamic Load Rating C: 296.0 kN | Basic Static Load Rating C0: 7410.0 kN | Mass: 11.3 kg | Outer Ring: Outer ring 2-point split | Seal: UU (double seal, high dust protection) | |
| SA1160UU | THK Spherical Plain Bearing SA1160UU (sealed), d=160mm, D=230mm, C=376.0kN | THK | Inner Diameter (d): 160 mm | Outer Diameter (D): 230 mm | Outer Ring Width (B): 80 mm | Inner Ring Width (B1): 105 mm | Basic Dynamic Load Rating C: 376.0 kN | Basic Static Load Rating C0: 9410.0 kN | Mass: 14.4 kg | Outer Ring: Outer ring 2-point split | Seal: UU (double seal, high dust protection) | |
| SA1180UU | THK Spherical Plain Bearing SA1180UU (sealed), d=180mm, D=260mm, C=424.0kN | THK | Inner Diameter (d): 180 mm | Outer Diameter (D): 260 mm | Outer Ring Width (B): 80 mm | Inner Ring Width (B1): 105 mm | Basic Dynamic Load Rating C: 424.0 kN | Basic Static Load Rating C0: 10600.0 kN | Mass: 18.9 kg | Outer Ring: Outer ring 2-point split | Seal: UU (double seal, high dust protection) | |
| SA1200UU | THK Spherical Plain Bearing SA1200UU (sealed), d=200mm, D=290mm, C=588.0kN | THK | Inner Diameter (d): 200 mm | Outer Diameter (D): 290 mm | Outer Ring Width (B): 100 mm | Inner Ring Width (B1): 130 mm | Basic Dynamic Load Rating C: 588.0 kN | Basic Static Load Rating C0: 14700.0 kN | Mass: 28.1 kg | Outer Ring: Outer ring 2-point split | Seal: UU (double seal, high dust protection) | |
| SA1220UU | THK Spherical Plain Bearing SA1220UU (sealed), d=220mm, D=320mm, C=647.0kN | THK | Inner Diameter (d): 220 mm | Outer Diameter (D): 320 mm | Outer Ring Width (B): 100 mm | Inner Ring Width (B1): 135 mm | Basic Dynamic Load Rating C: 647.0 kN | Basic Static Load Rating C0: 16200.0 kN | Mass: 36.1 kg | Outer Ring: Outer ring 2-point split | Seal: UU (double seal, high dust protection) | |
| SA1240UU | THK Spherical Plain Bearing SA1240UU (sealed), d=240mm, D=340mm, C=706.0kN | THK | Inner Diameter (d): 240 mm | Outer Diameter (D): 340 mm | Outer Ring Width (B): 100 mm | Inner Ring Width (B1): 140 mm | Basic Dynamic Load Rating C: 706.0 kN | Basic Static Load Rating C0: 17600.0 kN | Mass: 40.4 kg | Outer Ring: Outer ring 2-point split | Seal: UU (double seal, high dust protection) |
![[THK] — Spherical Plain Bearing SB (Heavy Load, 2-Split Outer Ring)](https://img.prosourcemro.com/2026/05/001-1062-300x300.png)
THK SB type Spherical Plain Bearing, most widely used series. Wide spherical contact area for heavy load applications. Outer ring split at 2 points (all sizes). Inner diameter d = 12~150mm. No seal option (standard only).
THK SB type Spherical Plain Bearing, most widely used series. Wide spherical contact area for heavy load applications. Outer ring split at 2 points (all sizes). Inner diameter d = 12~150mm. No seal option (standard only).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| SB12 | THK Spherical Plain Bearing SB12, d=12mm, D=22mm, C=3.82kN | THK | Inner Diameter (d): 12 mm | Outer Diameter (D): 22 mm | Outer Ring Width (B): 9 mm | Inner Ring Width (B1): 11 mm | Basic Dynamic Load Rating C: 3.82 kN | Basic Static Load Rating C0: 95.3 kN | Mass: 0.019 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB15 | THK Spherical Plain Bearing SB15, d=15mm, D=26mm, C=5.69kN | THK | Inner Diameter (d): 15 mm | Outer Diameter (D): 26 mm | Outer Ring Width (B): 11 mm | Inner Ring Width (B1): 13 mm | Basic Dynamic Load Rating C: 5.69 kN | Basic Static Load Rating C0: 142.0 kN | Mass: 0.028 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB20 | THK Spherical Plain Bearing SB20, d=20mm, D=32mm, C=9.22kN | THK | Inner Diameter (d): 20 mm | Outer Diameter (D): 32 mm | Outer Ring Width (B): 14 mm | Inner Ring Width (B1): 16 mm | Basic Dynamic Load Rating C: 9.22 kN | Basic Static Load Rating C0: 230.0 kN | Mass: 0.053 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB22 | THK Spherical Plain Bearing SB22, d=22mm, D=37mm, C=12.1kN | THK | Inner Diameter (d): 22 mm | Outer Diameter (D): 37 mm | Outer Ring Width (B): 16 mm | Inner Ring Width (B1): 19 mm | Basic Dynamic Load Rating C: 12.1 kN | Basic Static Load Rating C0: 301.0 kN | Mass: 0.085 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB25 | THK Spherical Plain Bearing SB25, d=25mm, D=42mm, C=15.3kN | THK | Inner Diameter (d): 25 mm | Outer Diameter (D): 42 mm | Outer Ring Width (B): 18 mm | Inner Ring Width (B1): 21 mm | Basic Dynamic Load Rating C: 15.3 kN | Basic Static Load Rating C0: 381.0 kN | Mass: 0.116 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB30 | THK Spherical Plain Bearing SB30, d=30mm, D=50mm, C=24.3kN | THK | Inner Diameter (d): 30 mm | Outer Diameter (D): 50 mm | Outer Ring Width (B): 23 mm | Inner Ring Width (B1): 27 mm | Basic Dynamic Load Rating C: 24.3 kN | Basic Static Load Rating C0: 609.0 kN | Mass: 0.225 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB35 | THK Spherical Plain Bearing SB35, d=35mm, D=55mm, C=30.6kN | THK | Inner Diameter (d): 35 mm | Outer Diameter (D): 55 mm | Outer Ring Width (B): 26 mm | Inner Ring Width (B1): 30 mm | Basic Dynamic Load Rating C: 30.6 kN | Basic Static Load Rating C0: 765.0 kN | Mass: 0.3 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB40 | THK Spherical Plain Bearing SB40, d=40mm, D=62mm, C=36.3kN | THK | Inner Diameter (d): 40 mm | Outer Diameter (D): 62 mm | Outer Ring Width (B): 28 mm | Inner Ring Width (B1): 33 mm | Basic Dynamic Load Rating C: 36.3 kN | Basic Static Load Rating C0: 906.0 kN | Mass: 0.375 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB45 | THK Spherical Plain Bearing SB45, d=45mm, D=72mm, C=45.2kN | THK | Inner Diameter (d): 45 mm | Outer Diameter (D): 72 mm | Outer Ring Width (B): 31 mm | Inner Ring Width (B1): 36 mm | Basic Dynamic Load Rating C: 45.2 kN | Basic Static Load Rating C0: 1130.0 kN | Mass: 0.6 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB50 | THK Spherical Plain Bearing SB50, d=50mm, D=80mm, C=61.0kN | THK | Inner Diameter (d): 50 mm | Outer Diameter (D): 80 mm | Outer Ring Width (B): 36 mm | Inner Ring Width (B1): 42 mm | Basic Dynamic Load Rating C: 61.0 kN | Basic Static Load Rating C0: 1530.0 kN | Mass: 0.87 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB55 | THK Spherical Plain Bearing SB55, d=55mm, D=90mm, C=75.3kN | THK | Inner Diameter (d): 55 mm | Outer Diameter (D): 90 mm | Outer Ring Width (B): 40 mm | Inner Ring Width (B1): 47 mm | Basic Dynamic Load Rating C: 75.3 kN | Basic Static Load Rating C0: 1880.0 kN | Mass: 1.26 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB60 | THK Spherical Plain Bearing SB60, d=60mm, D=100mm, C=95.3kN | THK | Inner Diameter (d): 60 mm | Outer Diameter (D): 100 mm | Outer Ring Width (B): 45 mm | Inner Ring Width (B1): 53 mm | Basic Dynamic Load Rating C: 95.3 kN | Basic Static Load Rating C0: 2380.0 kN | Mass: 1.7 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB65 | THK Spherical Plain Bearing SB65, d=65mm, D=105mm, C=104.0kN | THK | Inner Diameter (d): 65 mm | Outer Diameter (D): 105 mm | Outer Ring Width (B): 47 mm | Inner Ring Width (B1): 55 mm | Basic Dynamic Load Rating C: 104.0 kN | Basic Static Load Rating C0: 2600.0 kN | Mass: 2.05 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB70 | THK Spherical Plain Bearing SB70, d=70mm, D=110mm, C=118.0kN | THK | Inner Diameter (d): 70 mm | Outer Diameter (D): 110 mm | Outer Ring Width (B): 50 mm | Inner Ring Width (B1): 58 mm | Basic Dynamic Load Rating C: 118.0 kN | Basic Static Load Rating C0: 2940.0 kN | Mass: 2.22 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB75 | THK Spherical Plain Bearing SB75, d=75mm, D=120mm, C=142.0kN | THK | Inner Diameter (d): 75 mm | Outer Diameter (D): 120 mm | Outer Ring Width (B): 55 mm | Inner Ring Width (B1): 64 mm | Basic Dynamic Load Rating C: 142.0 kN | Basic Static Load Rating C0: 3560.0 kN | Mass: 3.02 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB80 | THK Spherical Plain Bearing SB80, d=80mm, D=130mm, C=170.0kN | THK | Inner Diameter (d): 80 mm | Outer Diameter (D): 130 mm | Outer Ring Width (B): 60 mm | Inner Ring Width (B1): 70 mm | Basic Dynamic Load Rating C: 170.0 kN | Basic Static Load Rating C0: 4240.0 kN | Mass: 3.98 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB85 | THK Spherical Plain Bearing SB85, d=85mm, D=135mm, C=185.0kN | THK | Inner Diameter (d): 85 mm | Outer Diameter (D): 135 mm | Outer Ring Width (B): 63 mm | Inner Ring Width (B1): 74 mm | Basic Dynamic Load Rating C: 185.0 kN | Basic Static Load Rating C0: 4640.0 kN | Mass: 4.29 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB90 | THK Spherical Plain Bearing SB90, d=90mm, D=140mm, C=199.0kN | THK | Inner Diameter (d): 90 mm | Outer Diameter (D): 140 mm | Outer Ring Width (B): 65 mm | Inner Ring Width (B1): 76 mm | Basic Dynamic Load Rating C: 199.0 kN | Basic Static Load Rating C0: 4970.0 kN | Mass: 4.71 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB95 | THK Spherical Plain Bearing SB95, d=95mm, D=150mm, C=230.0kN | THK | Inner Diameter (d): 95 mm | Outer Diameter (D): 150 mm | Outer Ring Width (B): 70 mm | Inner Ring Width (B1): 82 mm | Basic Dynamic Load Rating C: 230.0 kN | Basic Static Load Rating C0: 5760.0 kN | Mass: 6.05 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB100 | THK Spherical Plain Bearing SB100, d=100mm, D=160mm, C=265.0kN | THK | Inner Diameter (d): 100 mm | Outer Diameter (D): 160 mm | Outer Ring Width (B): 75 mm | Inner Ring Width (B1): 88 mm | Basic Dynamic Load Rating C: 265.0 kN | Basic Static Load Rating C0: 6620.0 kN | Mass: 7.42 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB110 | THK Spherical Plain Bearing SB110, d=110mm, D=170mm, C=301.0kN | THK | Inner Diameter (d): 110 mm | Outer Diameter (D): 170 mm | Outer Ring Width (B): 80 mm | Inner Ring Width (B1): 93 mm | Basic Dynamic Load Rating C: 301.0 kN | Basic Static Load Rating C0: 7530.0 kN | Mass: 8.55 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB115 | THK Spherical Plain Bearing SB115, d=115mm, D=180mm, C=330.0kN | THK | Inner Diameter (d): 115 mm | Outer Diameter (D): 180 mm | Outer Ring Width (B): 85 mm | Inner Ring Width (B1): 98 mm | Basic Dynamic Load Rating C: 330.0 kN | Basic Static Load Rating C0: 8250.0 kN | Mass: 10.3 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB120 | THK Spherical Plain Bearing SB120, d=120mm, D=190mm, C=371.0kN | THK | Inner Diameter (d): 120 mm | Outer Diameter (D): 190 mm | Outer Ring Width (B): 90 mm | Inner Ring Width (B1): 105 mm | Basic Dynamic Load Rating C: 371.0 kN | Basic Static Load Rating C0: 9260.0 kN | Mass: 12.4 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB130 | THK Spherical Plain Bearing SB130, d=130mm, D=200mm, C=414.0kN | THK | Inner Diameter (d): 130 mm | Outer Diameter (D): 200 mm | Outer Ring Width (B): 95 mm | Inner Ring Width (B1): 110 mm | Basic Dynamic Load Rating C: 414.0 kN | Basic Static Load Rating C0: 10300.0 kN | Mass: 13.8 kg | Outer Ring: 2-point split (all sizes) | Seal: None | |
| SB150 | THK Spherical Plain Bearing SB150, d=150mm, D=220mm, C=507.0kN | THK | Inner Diameter (d): 150 mm | Outer Diameter (D): 220 mm | Outer Ring Width (B): 105 mm | Inner Ring Width (B1): 120 mm | Basic Dynamic Load Rating C: 507.0 kN | Basic Static Load Rating C0: 12600.0 kN | Mass: 17.0 kg | Outer Ring: 2-point split (all sizes) | Seal: None |
![[THK] — VR1 Cross Roller Guide (VR1-20×5Z~VR1-80×21Z)](https://img.prosourcemro.com/2026/05/001-1018-300x228.png)
VR1 type Cross Roller Guide — compact high-rigidity LM system. Precision rollers arranged in orthogonal crossed pattern; cage moves 1/2 of stroke along V-groove rail. 1 set = 4 rails + 2 cages. Stainless steel type (VR1M) available on request. Rail lengths: 20~80mm. Max stroke: 12~52mm.
VR1 type Cross Roller Guide — compact high-rigidity LM system. Precision rollers arranged in orthogonal crossed pattern; cage moves 1/2 of stroke along V-groove rail. 1 set = 4 rails + 2 cages. Stainless steel type (VR1M) available on request. Rail lengths: 20~80mm. Max stroke: 12~52mm.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| VR1-20x5Z | THK cross roller guide, rail L0=20mm, max stroke 12mm, Z=5 | THK | Rail Length: L0=20mm | Max Stroke: 12mm | Roller Count: Z=5 per cage | Mounting Bolts: n×F=1×10mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=3mm, crossed 90° | Stainless Option: VR1M available on request | Rail Fixing Screw: M1.4×0.3 precision screw (0-type) | |
| VR1-30x7Z | THK cross roller guide, rail L0=30mm, max stroke 22mm, Z=7 | THK | Rail Length: L0=30mm | Max Stroke: 22mm | Roller Count: Z=7 per cage | Mounting Bolts: n×F=2×10mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=3mm, crossed 90° | Stainless Option: VR1M available on request | Rail Fixing Screw: M1.4×0.3 precision screw (0-type) | |
| VR1-40x10Z | THK cross roller guide, rail L0=40mm, max stroke 27mm, Z=10 | THK | Rail Length: L0=40mm | Max Stroke: 27mm | Roller Count: Z=10 per cage | Mounting Bolts: n×F=3×10mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=3mm, crossed 90° | Stainless Option: VR1M available on request | Rail Fixing Screw: M1.4×0.3 precision screw (0-type) | |
| VR1-50x13Z | THK cross roller guide, rail L0=50mm, max stroke 32mm, Z=13 | THK | Rail Length: L0=50mm | Max Stroke: 32mm | Roller Count: Z=13 per cage | Mounting Bolts: n×F=4×10mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=3mm, crossed 90° | Stainless Option: VR1M available on request | Rail Fixing Screw: M1.4×0.3 precision screw (0-type) | |
| VR1-60x16Z | THK cross roller guide, rail L0=60mm, max stroke 37mm, Z=16 | THK | Rail Length: L0=60mm | Max Stroke: 37mm | Roller Count: Z=16 per cage | Mounting Bolts: n×F=5×10mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=3mm, crossed 90° | Stainless Option: VR1M available on request | Rail Fixing Screw: M1.4×0.3 precision screw (0-type) | |
| VR1-70x19Z | THK cross roller guide, rail L0=70mm, max stroke 42mm, Z=19 | THK | Rail Length: L0=70mm | Max Stroke: 42mm | Roller Count: Z=19 per cage | Mounting Bolts: n×F=6×10mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=3mm, crossed 90° | Stainless Option: VR1M available on request | Rail Fixing Screw: M1.4×0.3 precision screw (0-type) | |
| VR1-80x21Z | THK cross roller guide, rail L0=80mm, max stroke 52mm, Z=21 | THK | Rail Length: L0=80mm | Max Stroke: 52mm | Roller Count: Z=21 per cage | Mounting Bolts: n×F=7×10mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=3mm, crossed 90° | Stainless Option: VR1M available on request | Rail Fixing Screw: M1.4×0.3 precision screw (0-type) |
![[THK] — VR2 Cross Roller Guide (VR2-30×5Z~VR2-180×32Z)](https://img.prosourcemro.com/2026/05/001-1019-300x228.png)
VR2 type Cross Roller Guide — compact high-rigidity LM system. Precision rollers arranged in orthogonal crossed pattern; cage moves 1/2 of stroke along V-groove rail. 1 set = 4 rails + 2 cages. Larger size than VR1. Stainless steel type (VR2M) available on request. Rail lengths: 30~180mm. Max stroke: 18~102mm.
VR2 type Cross Roller Guide — compact high-rigidity LM system. Precision rollers arranged in orthogonal crossed pattern; cage moves 1/2 of stroke along V-groove rail. 1 set = 4 rails + 2 cages. Larger size than VR1. Stainless steel type (VR2M) available on request. Rail lengths: 30~180mm. Max stroke: 18~102mm.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| VR2-30x5Z | THK cross roller guide VR2, rail L0=30mm, max stroke 18mm, Z=5 | THK | Rail Length: L0=30mm | Max Stroke: 18mm | Roller Count: Z=5 per cage | Mounting Bolts: n×F=1×15mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=4.4mm, crossed 90° | Stainless Option: VR2M available on request | Rail Fixing Screw: M2×0.4 | |
| VR2-45x8Z | THK cross roller guide VR2, rail L0=45mm, max stroke 24mm, Z=8 | THK | Rail Length: L0=45mm | Max Stroke: 24mm | Roller Count: Z=8 per cage | Mounting Bolts: n×F=2×15mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=4.4mm, crossed 90° | Stainless Option: VR2M available on request | Rail Fixing Screw: M2×0.4 | |
| VR2-60x11Z | THK cross roller guide VR2, rail L0=60mm, max stroke 30mm, Z=11 | THK | Rail Length: L0=60mm | Max Stroke: 30mm | Roller Count: Z=11 per cage | Mounting Bolts: n×F=3×15mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=4.4mm, crossed 90° | Stainless Option: VR2M available on request | Rail Fixing Screw: M2×0.4 | |
| VR2-75x13Z | THK cross roller guide VR2, rail L0=75mm, max stroke 44mm, Z=13 | THK | Rail Length: L0=75mm | Max Stroke: 44mm | Roller Count: Z=13 per cage | Mounting Bolts: n×F=4×15mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=4.4mm, crossed 90° | Stainless Option: VR2M available on request | Rail Fixing Screw: M2×0.4 | |
| VR2-90x16Z | THK cross roller guide VR2, rail L0=90mm, max stroke 50mm, Z=16 | THK | Rail Length: L0=90mm | Max Stroke: 50mm | Roller Count: Z=16 per cage | Mounting Bolts: n×F=5×15mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=4.4mm, crossed 90° | Stainless Option: VR2M available on request | Rail Fixing Screw: M2×0.4 | |
| VR2-105x18Z | THK cross roller guide VR2, rail L0=105mm, max stroke 64mm, Z=18 | THK | Rail Length: L0=105mm | Max Stroke: 64mm | Roller Count: Z=18 per cage | Mounting Bolts: n×F=6×15mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=4.4mm, crossed 90° | Stainless Option: VR2M available on request | Rail Fixing Screw: M2×0.4 | |
| VR2-120x21Z | THK cross roller guide VR2, rail L0=120mm, max stroke 70mm, Z=21 | THK | Rail Length: L0=120mm | Max Stroke: 70mm | Roller Count: Z=21 per cage | Mounting Bolts: n×F=7×15mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=4.4mm, crossed 90° | Stainless Option: VR2M available on request | Rail Fixing Screw: M2×0.4 | |
| VR2-135x23Z | THK cross roller guide VR2, rail L0=135mm, max stroke 84mm, Z=23 | THK | Rail Length: L0=135mm | Max Stroke: 84mm | Roller Count: Z=23 per cage | Mounting Bolts: n×F=8×15mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=4.4mm, crossed 90° | Stainless Option: VR2M available on request | Rail Fixing Screw: M2×0.4 | |
| VR2-150x26Z | THK cross roller guide VR2, rail L0=150mm, max stroke 90mm, Z=26 | THK | Rail Length: L0=150mm | Max Stroke: 90mm | Roller Count: Z=26 per cage | Mounting Bolts: n×F=9×15mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=4.4mm, crossed 90° | Stainless Option: VR2M available on request | Rail Fixing Screw: M2×0.4 | |
| VR2-165x29Z | THK cross roller guide VR2, rail L0=165mm, max stroke 96mm, Z=29 | THK | Rail Length: L0=165mm | Max Stroke: 96mm | Roller Count: Z=29 per cage | Mounting Bolts: n×F=10×15mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=4.4mm, crossed 90° | Stainless Option: VR2M available on request | Rail Fixing Screw: M2×0.4 | |
| VR2-180x32Z | THK cross roller guide VR2, rail L0=180mm, max stroke 102mm, Z=32 | THK | Rail Length: L0=180mm | Max Stroke: 102mm | Roller Count: Z=32 per cage | Mounting Bolts: n×F=11×15mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=4.4mm, crossed 90° | Stainless Option: VR2M available on request | Rail Fixing Screw: M2×0.4 |
![[THK] — VR3 Cross Roller Guide (VR3-50×7Z~VR3-300×42Z)](https://img.prosourcemro.com/2026/05/001-1020-300x228.png)
VR3 type Cross Roller Guide — compact high-rigidity LM system, large size. Precision rollers arranged in orthogonal crossed pattern; cage moves 1/2 of stroke along V-groove rail. 1 set = 4 rails + 2 cages. Larger than VR2. Stainless steel type (VR3M) available on request. Rail lengths: 50~300mm. Max stroke: 28~178mm.
VR3 type Cross Roller Guide — compact high-rigidity LM system, large size. Precision rollers arranged in orthogonal crossed pattern; cage moves 1/2 of stroke along V-groove rail. 1 set = 4 rails + 2 cages. Larger than VR2. Stainless steel type (VR3M) available on request. Rail lengths: 50~300mm. Max stroke: 28~178mm.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| VR3-50x7Z | THK cross roller guide VR3, rail L0=50mm, max stroke 28mm, Z=7 | THK | Rail Length: L0=50mm | Max Stroke: 28mm | Roller Count: Z=7 per cage | Mounting Bolts: n×F=1×25mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=6mm, crossed 90° | Stainless Option: VR3M available on request | |
| VR3-75x10Z | THK cross roller guide VR3, rail L0=75mm, max stroke 48mm, Z=10 | THK | Rail Length: L0=75mm | Max Stroke: 48mm | Roller Count: Z=10 per cage | Mounting Bolts: n×F=2×25mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=6mm, crossed 90° | Stainless Option: VR3M available on request | |
| VR3-100x14Z | THK cross roller guide VR3, rail L0=100mm, max stroke 58mm, Z=14 | THK | Rail Length: L0=100mm | Max Stroke: 58mm | Roller Count: Z=14 per cage | Mounting Bolts: n×F=3×25mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=6mm, crossed 90° | Stainless Option: VR3M available on request | |
| VR3-125x17Z | THK cross roller guide VR3, rail L0=125mm, max stroke 78mm, Z=17 | THK | Rail Length: L0=125mm | Max Stroke: 78mm | Roller Count: Z=17 per cage | Mounting Bolts: n×F=4×25mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=6mm, crossed 90° | Stainless Option: VR3M available on request | |
| VR3-150x21Z | THK cross roller guide VR3, rail L0=150mm, max stroke 88mm, Z=21 | THK | Rail Length: L0=150mm | Max Stroke: 88mm | Roller Count: Z=21 per cage | Mounting Bolts: n×F=5×25mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=6mm, crossed 90° | Stainless Option: VR3M available on request | |
| VR3-175x24Z | THK cross roller guide VR3, rail L0=175mm, max stroke 108mm, Z=24 | THK | Rail Length: L0=175mm | Max Stroke: 108mm | Roller Count: Z=24 per cage | Mounting Bolts: n×F=6×25mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=6mm, crossed 90° | Stainless Option: VR3M available on request | |
| VR3-200x28Z | THK cross roller guide VR3, rail L0=200mm, max stroke 118mm, Z=28 | THK | Rail Length: L0=200mm | Max Stroke: 118mm | Roller Count: Z=28 per cage | Mounting Bolts: n×F=7×25mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=6mm, crossed 90° | Stainless Option: VR3M available on request | |
| VR3-225x31Z | THK cross roller guide VR3, rail L0=225mm, max stroke 138mm, Z=31 | THK | Rail Length: L0=225mm | Max Stroke: 138mm | Roller Count: Z=31 per cage | Mounting Bolts: n×F=8×25mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=6mm, crossed 90° | Stainless Option: VR3M available on request | |
| VR3-250x35Z | THK cross roller guide VR3, rail L0=250mm, max stroke 148mm, Z=35 | THK | Rail Length: L0=250mm | Max Stroke: 148mm | Roller Count: Z=35 per cage | Mounting Bolts: n×F=9×25mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=6mm, crossed 90° | Stainless Option: VR3M available on request | |
| VR3-275x38Z | THK cross roller guide VR3, rail L0=275mm, max stroke 168mm, Z=38 | THK | Rail Length: L0=275mm | Max Stroke: 168mm | Roller Count: Z=38 per cage | Mounting Bolts: n×F=10×25mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=6mm, crossed 90° | Stainless Option: VR3M available on request | |
| VR3-300x42Z | THK cross roller guide VR3, rail L0=300mm, max stroke 178mm, Z=42 | THK | Rail Length: L0=300mm | Max Stroke: 178mm | Roller Count: Z=42 per cage | Mounting Bolts: n×F=11×25mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=6mm, crossed 90° | Stainless Option: VR3M available on request |
![[THK] — VR4 Cross Roller Guide (VR4-80×7Z~VR4-480×47Z)](https://img.prosourcemro.com/2026/05/001-1021-300x228.png)
VR4 type Cross Roller Guide — compact high-rigidity LM system, extra-large size. Precision rollers arranged in orthogonal crossed pattern; cage moves 1/2 of stroke along V-groove rail. 1 set = 4 rails + 2 cages. Larger than VR3. Stainless steel type (VR4M) available on request. Rail lengths: 80~480mm. Max stroke: 58~298mm.
VR4 type Cross Roller Guide — compact high-rigidity LM system, extra-large size. Precision rollers arranged in orthogonal crossed pattern; cage moves 1/2 of stroke along V-groove rail. 1 set = 4 rails + 2 cages. Larger than VR3. Stainless steel type (VR4M) available on request. Rail lengths: 80~480mm. Max stroke: 58~298mm.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| VR4-80x7Z | THK cross roller guide VR4, rail L0=80mm, max stroke 58mm, Z=7 | THK | Rail Length: L0=80mm | Max Stroke: 58mm | Roller Count: Z=7 per cage | Mounting Bolts: n×F=1×40mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=8mm, crossed 90° | Stainless Option: VR4M available on request | |
| VR4-120x11Z | THK cross roller guide VR4, rail L0=120mm, max stroke 82mm, Z=11 | THK | Rail Length: L0=120mm | Max Stroke: 82mm | Roller Count: Z=11 per cage | Mounting Bolts: n×F=2×40mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=8mm, crossed 90° | Stainless Option: VR4M available on request | |
| VR4-160x15Z | THK cross roller guide VR4, rail L0=160mm, max stroke 106mm, Z=15 | THK | Rail Length: L0=160mm | Max Stroke: 106mm | Roller Count: Z=15 per cage | Mounting Bolts: n×F=3×40mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=8mm, crossed 90° | Stainless Option: VR4M available on request | |
| VR4-200x19Z | THK cross roller guide VR4, rail L0=200mm, max stroke 130mm, Z=19 | THK | Rail Length: L0=200mm | Max Stroke: 130mm | Roller Count: Z=19 per cage | Mounting Bolts: n×F=4×40mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=8mm, crossed 90° | Stainless Option: VR4M available on request | |
| VR4-240x23Z | THK cross roller guide VR4, rail L0=240mm, max stroke 154mm, Z=23 | THK | Rail Length: L0=240mm | Max Stroke: 154mm | Roller Count: Z=23 per cage | Mounting Bolts: n×F=5×40mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=8mm, crossed 90° | Stainless Option: VR4M available on request | |
| VR4-280x27Z | THK cross roller guide VR4, rail L0=280mm, max stroke 178mm, Z=27 | THK | Rail Length: L0=280mm | Max Stroke: 178mm | Roller Count: Z=27 per cage | Mounting Bolts: n×F=6×40mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=8mm, crossed 90° | Stainless Option: VR4M available on request | |
| VR4-320x31Z | THK cross roller guide VR4, rail L0=320mm, max stroke 202mm, Z=31 | THK | Rail Length: L0=320mm | Max Stroke: 202mm | Roller Count: Z=31 per cage | Mounting Bolts: n×F=7×40mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=8mm, crossed 90° | Stainless Option: VR4M available on request | |
| VR4-360x35Z | THK cross roller guide VR4, rail L0=360mm, max stroke 226mm, Z=35 | THK | Rail Length: L0=360mm | Max Stroke: 226mm | Roller Count: Z=35 per cage | Mounting Bolts: n×F=8×40mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=8mm, crossed 90° | Stainless Option: VR4M available on request | |
| VR4-400x39Z | THK cross roller guide VR4, rail L0=400mm, max stroke 250mm, Z=39 | THK | Rail Length: L0=400mm | Max Stroke: 250mm | Roller Count: Z=39 per cage | Mounting Bolts: n×F=9×40mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=8mm, crossed 90° | Stainless Option: VR4M available on request | |
| VR4-440x43Z | THK cross roller guide VR4, rail L0=440mm, max stroke 274mm, Z=43 | THK | Rail Length: L0=440mm | Max Stroke: 274mm | Roller Count: Z=43 per cage | Mounting Bolts: n×F=10×40mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=8mm, crossed 90° | Stainless Option: VR4M available on request | |
| VR4-480x47Z | THK cross roller guide VR4, rail L0=480mm, max stroke 298mm, Z=47 | THK | Rail Length: L0=480mm | Max Stroke: 298mm | Roller Count: Z=47 per cage | Mounting Bolts: n×F=11×40mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=8mm, crossed 90° | Stainless Option: VR4M available on request |
![[THK] — VR6 Cross Roller Guide (VR6-100×7Z~VR6-600×41Z)](https://img.prosourcemro.com/2026/05/001-1022-300x228.png)
VR6 type Cross Roller Guide — compact high-rigidity LM system, heavy-duty size. Precision rollers arranged in orthogonal crossed pattern; cage moves 1/2 of stroke along V-groove rail. 1 set = 4 rails + 2 cages. Larger than VR4. Stainless steel type (VR6M) available on request. Rail lengths: 100~600mm. Max stroke: 56~376mm.
VR6 type Cross Roller Guide — compact high-rigidity LM system, heavy-duty size. Precision rollers arranged in orthogonal crossed pattern; cage moves 1/2 of stroke along V-groove rail. 1 set = 4 rails + 2 cages. Larger than VR4. Stainless steel type (VR6M) available on request. Rail lengths: 100~600mm. Max stroke: 56~376mm.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| VR6-100x7Z | THK cross roller guide VR6, rail L0=100mm, max stroke 56mm, Z=7 | THK | Rail Length: L0=100mm | Max Stroke: 56mm | Roller Count: Z=7 per cage | Mounting Bolts: n×F=1×50mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=9.5mm, crossed 90° | Stainless Option: VR6M available on request | |
| VR6-150x10Z | THK cross roller guide VR6, rail L0=150mm, max stroke 96mm, Z=10 | THK | Rail Length: L0=150mm | Max Stroke: 96mm | Roller Count: Z=10 per cage | Mounting Bolts: n×F=2×50mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=9.5mm, crossed 90° | Stainless Option: VR6M available on request | |
| VR6-200x13Z | THK cross roller guide VR6, rail L0=200mm, max stroke 136mm, Z=13 | THK | Rail Length: L0=200mm | Max Stroke: 136mm | Roller Count: Z=13 per cage | Mounting Bolts: n×F=3×50mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=9.5mm, crossed 90° | Stainless Option: VR6M available on request | |
| VR6-250x17Z | THK cross roller guide VR6, rail L0=250mm, max stroke 156mm, Z=17 | THK | Rail Length: L0=250mm | Max Stroke: 156mm | Roller Count: Z=17 per cage | Mounting Bolts: n×F=4×50mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=9.5mm, crossed 90° | Stainless Option: VR6M available on request | |
| VR6-300x20Z | THK cross roller guide VR6, rail L0=300mm, max stroke 196mm, Z=20 | THK | Rail Length: L0=300mm | Max Stroke: 196mm | Roller Count: Z=20 per cage | Mounting Bolts: n×F=5×50mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=9.5mm, crossed 90° | Stainless Option: VR6M available on request | |
| VR6-350x24Z | THK cross roller guide VR6, rail L0=350mm, max stroke 216mm, Z=24 | THK | Rail Length: L0=350mm | Max Stroke: 216mm | Roller Count: Z=24 per cage | Mounting Bolts: n×F=6×50mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=9.5mm, crossed 90° | Stainless Option: VR6M available on request | |
| VR6-400x27Z | THK cross roller guide VR6, rail L0=400mm, max stroke 256mm, Z=27 | THK | Rail Length: L0=400mm | Max Stroke: 256mm | Roller Count: Z=27 per cage | Mounting Bolts: n×F=7×50mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=9.5mm, crossed 90° | Stainless Option: VR6M available on request | |
| VR6-450x31Z | THK cross roller guide VR6, rail L0=450mm, max stroke 276mm, Z=31 | THK | Rail Length: L0=450mm | Max Stroke: 276mm | Roller Count: Z=31 per cage | Mounting Bolts: n×F=8×50mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=9.5mm, crossed 90° | Stainless Option: VR6M available on request | |
| VR6-500x34Z | THK cross roller guide VR6, rail L0=500mm, max stroke 316mm, Z=34 | THK | Rail Length: L0=500mm | Max Stroke: 316mm | Roller Count: Z=34 per cage | Mounting Bolts: n×F=9×50mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=9.5mm, crossed 90° | Stainless Option: VR6M available on request | |
| VR6-550x38Z | THK cross roller guide VR6, rail L0=550mm, max stroke 336mm, Z=38 | THK | Rail Length: L0=550mm | Max Stroke: 336mm | Roller Count: Z=38 per cage | Mounting Bolts: n×F=10×50mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=9.5mm, crossed 90° | Stainless Option: VR6M available on request | |
| VR6-600x41Z | THK cross roller guide VR6, rail L0=600mm, max stroke 376mm, Z=41 | THK | Rail Length: L0=600mm | Max Stroke: 376mm | Roller Count: Z=41 per cage | Mounting Bolts: n×F=11×50mm | Set Configuration: 1 set = 4 rails + 2 cages | Roller Dia.: D=9.5mm, crossed 90° | Stainless Option: VR6M available on request |