🔍
Can't find your part? We source far beyond this catalog —
list any MRO part, even if it's not listed here, and we'll quote it direct from Korean makers.
Submit an RFQ →
Linear Motion
![[THK] — LM-OP Linear Bush Open Type (LM13-OP~LM60-OP)](https://img.prosourcemro.com/2026/05/001-974-300x243.png)
LM-OP type Linear Bush — open type. One ball circuit (50~80°) is cut away from the outer shell, allowing use where the LM shaft is supported at a deflection point. Clearance easily adjustable. Shaft diameters: 13~60mm. Synthetic resin retainer standard (max 80°C).
LM-OP type Linear Bush — open type. One ball circuit (50~80°) is cut away from the outer shell, allowing use where the LM shaft is supported at a deflection point. Clearance easily adjustable. Shaft diameters: 13~60mm. Synthetic resin retainer standard (max 80°C).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LM13-OP | THK Linear Bush open type, shaft φ13mm, OD φ23mm, L=32mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM16-OP | THK Linear Bush open type, shaft φ16mm, OD φ28mm, L=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM20-OP | THK Linear Bush open type, shaft φ20mm, OD φ32mm, L=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM25-OP | THK Linear Bush open type, shaft φ25mm, OD φ40mm, L=59mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM30-OP | THK Linear Bush open type, shaft φ30mm, OD φ45mm, L=64mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM35-OP | THK Linear Bush open type, shaft φ35mm, OD φ52mm, L=70mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=70mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM40-OP | THK Linear Bush open type, shaft φ40mm, OD φ60mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=80mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM50-OP | THK Linear Bush open type, shaft φ50mm, OD φ80mm, L=100mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=80mm | Length: L=100mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LM60-OP | THK Linear Bush open type, shaft φ60mm, OD φ90mm, L=110mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=110mm | Type: Open type (1 circuit cutaway, 50~80°) | Feature: Usable at shaft deflection support points | Clearance: Adjustable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMCF-L Linear Bush Center Flange Long Type (LMCF6L~LMCF25L)](https://img.prosourcemro.com/2026/05/001-991-300x241.png)
LMCF-L type Linear Bush — center flange, long type. Flange positioned at center of bush body; load is distributed equally to both sides. Ideal for equal stroke in both directions. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMCF-L type Linear Bush — center flange, long type. Flange positioned at center of bush body; load is distributed equally to both sides. Ideal for equal stroke in both directions. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMCF6L | THK Linear Bush center flange long, shaft φ6mm, OD φ12mm, L=35mm, flange φ28mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=35mm | Flange OD: D1=28mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF8L | THK Linear Bush center flange long, shaft φ8mm, OD φ15mm, L=45mm, flange φ32mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=45mm | Flange OD: D1=32mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF10L | THK Linear Bush center flange long, shaft φ10mm, OD φ19mm, L=55mm, flange φ39mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=55mm | Flange OD: D1=39mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF12L | THK Linear Bush center flange long, shaft φ12mm, OD φ21mm, L=57mm, flange φ42mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=57mm | Flange OD: D1=42mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF13L | THK Linear Bush center flange long, shaft φ13mm, OD φ23mm, L=61mm, flange φ43mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=61mm | Flange OD: D1=43mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF16L | THK Linear Bush center flange long, shaft φ16mm, OD φ28mm, L=70mm, flange φ48mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=70mm | Flange OD: D1=48mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF20L | THK Linear Bush center flange long, shaft φ20mm, OD φ32mm, L=80mm, flange φ54mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=80mm | Flange OD: D1=54mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCF25L | THK Linear Bush center flange long, shaft φ25mm, OD φ40mm, L=112mm, flange φ62mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=112mm | Flange OD: D1=62mm | Type: Center flange long type (2 retainers) | Feature: Equal load distribution both sides; equal stroke in both directions | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMCH-L Linear Bush Center Small Plate Flange Long Type (LMCH6L~LMCH25L)](https://img.prosourcemro.com/2026/05/001-1003-300x239.png)
LMCH-L type Linear Bush — center small plate flange, long type. Lower center height than LMCF type for ultra-compact design. Flange at center of bush body for equal load distribution both sides. Two retainers for optimal moment load performance. 2 ball circuits in flat direction for improved service life. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMCH-L type Linear Bush — center small plate flange, long type. Lower center height than LMCF type for ultra-compact design. Flange at center of bush body for equal load distribution both sides. Two retainers for optimal moment load performance. 2 ball circuits in flat direction for improved service life. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMCH6L | THK Linear Bush center small plate flange long, shaft φ6mm, OD φ12mm, L=35mm, K=18mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=35mm | Flange OD: D1=28mm | Square Width: K=18mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH8L | THK Linear Bush center small plate flange long, shaft φ8mm, OD φ15mm, L=45mm, K=21mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=45mm | Flange OD: D1=32mm | Square Width: K=21mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH10L | THK Linear Bush center small plate flange long, shaft φ10mm, OD φ19mm, L=55mm, K=25mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=55mm | Flange OD: D1=39mm | Square Width: K=25mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH12L | THK Linear Bush center small plate flange long, shaft φ12mm, OD φ21mm, L=57mm, K=27mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=57mm | Flange OD: D1=42mm | Square Width: K=27mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH13L | THK Linear Bush center small plate flange long, shaft φ13mm, OD φ23mm, L=61mm, K=29mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=61mm | Flange OD: D1=43mm | Square Width: K=29mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH16L | THK Linear Bush center small plate flange long, shaft φ16mm, OD φ28mm, L=70mm, K=34mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=70mm | Flange OD: D1=48mm | Square Width: K=34mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH20L | THK Linear Bush center small plate flange long, shaft φ20mm, OD φ32mm, L=80mm, K=38mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=80mm | Flange OD: D1=54mm | Square Width: K=38mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCH25L | THK Linear Bush center small plate flange long, shaft φ25mm, OD φ40mm, L=112mm, K=46mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=112mm | Flange OD: D1=62mm | Square Width: K=46mm | Type: Center small plate flange long type (2 retainers) | Feature: Equal load both sides; lower than LMCF; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMCK-L Linear Bush Center Square Flange Long Type (LMCK6L~LMCK25L)](https://img.prosourcemro.com/2026/05/001-1000-300x239.png)
LMCK-L type Linear Bush — center square flange, long type. 4-flat version of LMCF-L; lower center height than round center flange for compact design. Flange at center of bush body for equal load distribution both sides. Two retainers for optimal moment load performance. Ideal for equal stroke in both directions. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMCK-L type Linear Bush — center square flange, long type. 4-flat version of LMCF-L; lower center height than round center flange for compact design. Flange at center of bush body for equal load distribution both sides. Two retainers for optimal moment load performance. Ideal for equal stroke in both directions. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMCK6L | THK Linear Bush center square flange long, shaft φ6mm, OD φ12mm, L=35mm, K=22mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=35mm | Flange OD: D1=28mm | Square Width: K=22mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK8L | THK Linear Bush center square flange long, shaft φ8mm, OD φ15mm, L=45mm, K=25mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=45mm | Flange OD: D1=32mm | Square Width: K=25mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK10L | THK Linear Bush center square flange long, shaft φ10mm, OD φ19mm, L=55mm, K=30mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=55mm | Flange OD: D1=39mm | Square Width: K=30mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK12L | THK Linear Bush center square flange long, shaft φ12mm, OD φ21mm, L=57mm, K=32mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=57mm | Flange OD: D1=42mm | Square Width: K=32mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK13L | THK Linear Bush center square flange long, shaft φ13mm, OD φ23mm, L=61mm, K=34mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=61mm | Flange OD: D1=43mm | Square Width: K=34mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK16L | THK Linear Bush center square flange long, shaft φ16mm, OD φ28mm, L=70mm, K=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=70mm | Flange OD: D1=48mm | Square Width: K=37mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK20L | THK Linear Bush center square flange long, shaft φ20mm, OD φ32mm, L=80mm, K=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=80mm | Flange OD: D1=54mm | Square Width: K=42mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMCK25L | THK Linear Bush center square flange long, shaft φ25mm, OD φ40mm, L=112mm, K=50mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=112mm | Flange OD: D1=62mm | Square Width: K=50mm | Type: Center square flange long type (2 retainers) | Feature: Equal load distribution both sides; compact center height | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LME Linear Bush European Metric Series (LME5~LME80GA)](https://img.prosourcemro.com/2026/05/001-981-300x241.png)
LME type Linear Bush — European metric dimension series. High-precision cylindrical outer diameter for broad application. Shaft diameters: 5~80mm. LME5~LME60: synthetic resin retainer (max 80°C). LME80GA: metal retainer type. Clearance-adjustable (-AJ) and open type (-OP) variants available from LME16. Metal retainer option available (suffix A). Oil hole option (suffix OH).
LME type Linear Bush — European metric dimension series. High-precision cylindrical outer diameter for broad application. Shaft diameters: 5~80mm. LME5~LME60: synthetic resin retainer (max 80°C). LME80GA: metal retainer type. Clearance-adjustable (-AJ) and open type (-OP) variants available from LME16. Metal retainer option available (suffix A). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LME5 | THK Linear Bush European metric, shaft φ5mm, OD φ12mm, L=22mm | THK | Shaft Dia.: D0=5mm | Outer Dia.: D=12mm | Length: L=22mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ | Oil Hole: Add suffix OH on order | |
| LME8 | THK Linear Bush European metric, shaft φ8mm, OD φ16mm, L=25mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=16mm | Length: L=25mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ | Oil Hole: Add suffix OH on order | |
| LME12 | THK Linear Bush European metric, shaft φ12mm, OD φ22mm, L=32mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=22mm | Length: L=32mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ | Oil Hole: Add suffix OH on order | |
| LME16 | THK Linear Bush European metric, shaft φ16mm, OD φ26mm, L=36mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=26mm | Length: L=36mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME20 | THK Linear Bush European metric, shaft φ20mm, OD φ32mm, L=45mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=45mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME25 | THK Linear Bush European metric, shaft φ25mm, OD φ40mm, L=58mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=58mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME30 | THK Linear Bush European metric, shaft φ30mm, OD φ47mm, L=68mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=47mm | Length: L=68mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME40 | THK Linear Bush European metric, shaft φ40mm, OD φ62mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=62mm | Length: L=80mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME50 | THK Linear Bush European metric, shaft φ50mm, OD φ75mm, L=100mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=75mm | Length: L=100mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME60 | THK Linear Bush European metric, shaft φ60mm, OD φ90mm, L=125mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=125mm | Retainer: Synthetic resin (max 80°C) | Variants: Standard / -AJ / -OP | Oil Hole: Add suffix OH on order | |
| LME80GA | THK Linear Bush European metric, shaft φ80mm, OD φ120mm, L=165mm | THK | Shaft Dia.: D0=80mm | Outer Dia.: D=120mm | Length: L=165mm | Retainer: Metal | Variants: Standard / -AJ / -OP (metal retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LME-AJ Linear Bush European Metric Clearance Adjustable (LME5-AJ~LME80GA-AJ)](https://img.prosourcemro.com/2026/05/001-982-300x241.png)
LME-AJ type Linear Bush — European metric series, clearance adjustable. Slotted outer shell allows inner diameter adjustment via housing. Shaft diameters: 5~80mm. LME5-AJ~LME60-AJ: synthetic resin retainer (max 80°C). LME80GA-AJ: metal retainer type.
LME-AJ type Linear Bush — European metric series, clearance adjustable. Slotted outer shell allows inner diameter adjustment via housing. Shaft diameters: 5~80mm. LME5-AJ~LME60-AJ: synthetic resin retainer (max 80°C). LME80GA-AJ: metal retainer type.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LME5-AJ | THK Linear Bush European metric AJ, shaft φ5mm, OD φ12mm, L=22mm | THK | Shaft Dia.: D0=5mm | Outer Dia.: D=12mm | Length: L=22mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME8-AJ | THK Linear Bush European metric AJ, shaft φ8mm, OD φ16mm, L=25mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=16mm | Length: L=25mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME12-AJ | THK Linear Bush European metric AJ, shaft φ12mm, OD φ22mm, L=32mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=22mm | Length: L=32mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME16-AJ | THK Linear Bush European metric AJ, shaft φ16mm, OD φ26mm, L=36mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=26mm | Length: L=36mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME20-AJ | THK Linear Bush European metric AJ, shaft φ20mm, OD φ32mm, L=45mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=45mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME25-AJ | THK Linear Bush European metric AJ, shaft φ25mm, OD φ40mm, L=58mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=58mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME30-AJ | THK Linear Bush European metric AJ, shaft φ30mm, OD φ47mm, L=68mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=47mm | Length: L=68mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME40-AJ | THK Linear Bush European metric AJ, shaft φ40mm, OD φ62mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=62mm | Length: L=80mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME50-AJ | THK Linear Bush European metric AJ, shaft φ50mm, OD φ75mm, L=100mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=75mm | Length: L=100mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME60-AJ | THK Linear Bush European metric AJ, shaft φ60mm, OD φ90mm, L=125mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=125mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Synthetic resin (max 80°C) | Oil Hole: Add suffix OH on order | |
| LME80GA-AJ | THK Linear Bush European metric AJ, shaft φ80mm, OD φ120mm, L=165mm | THK | Shaft Dia.: D0=80mm | Outer Dia.: D=120mm | Length: L=165mm | Type: Clearance adjustable (slotted outer shell) | Retainer: Metal | Oil Hole: Add suffix OH on order |
![[THK] — LME-OP Linear Bush European Metric Open Type (LME16-OP~LME80GA-OP)](https://img.prosourcemro.com/2026/05/001-983-300x241.png)
LME-OP type Linear Bush — European metric series, open type. One ball circuit cut away from outer shell. Usable at shaft deflection support points. Clearance adjustable. Shaft diameters: 16~80mm. LME16-OP~LME60-OP: synthetic resin retainer (max 80°C). LME80GA-OP: metal retainer type.
LME-OP type Linear Bush — European metric series, open type. One ball circuit cut away from outer shell. Usable at shaft deflection support points. Clearance adjustable. Shaft diameters: 16~80mm. LME16-OP~LME60-OP: synthetic resin retainer (max 80°C). LME80GA-OP: metal retainer type.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LME16-OP | THK Linear Bush European metric OP, shaft φ16mm, OD φ26mm, L=36mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=26mm | Length: L=36mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME20-OP | THK Linear Bush European metric OP, shaft φ20mm, OD φ32mm, L=45mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=45mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME25-OP | THK Linear Bush European metric OP, shaft φ25mm, OD φ40mm, L=58mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=58mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME30-OP | THK Linear Bush European metric OP, shaft φ30mm, OD φ47mm, L=68mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=47mm | Length: L=68mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME40-OP | THK Linear Bush European metric OP, shaft φ40mm, OD φ62mm, L=80mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=62mm | Length: L=80mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME50-OP | THK Linear Bush European metric OP, shaft φ50mm, OD φ75mm, L=100mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=75mm | Length: L=100mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME60-OP | THK Linear Bush European metric OP, shaft φ60mm, OD φ90mm, L=125mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=125mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Synthetic resin (max 80°C) | Clearance: Adjustable | Oil Hole: Add suffix OH on order | |
| LME80GA-OP | THK Linear Bush European metric OP, shaft φ80mm, OD φ120mm, L=165mm | THK | Shaft Dia.: D0=80mm | Outer Dia.: D=120mm | Length: L=165mm | Type: Open type (1 circuit cutaway) | Feature: Usable at shaft deflection support points | Retainer: Metal | Clearance: Adjustable | Oil Hole: Add suffix OH on order |
![[THK] — LMF Linear Bush Flange Type (LMF6~LMF60)](https://img.prosourcemro.com/2026/05/001-985-300x241.png)
LMF type Linear Bush — flange integrated type. Nut and flange in one piece; mounts directly to housing with bolts. Shaft diameters: 6~60mm. Short type (LMF8S) available for φ8mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMF type Linear Bush — flange integrated type. Nut and flange in one piece; mounts directly to housing with bolts. Shaft diameters: 6~60mm. Short type (LMF8S) available for φ8mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMF6 | THK Linear Bush flange type, shaft φ6mm, OD φ12mm, L=19mm, flange φ28mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=19mm | Flange OD: D1=28mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF8S | THK Linear Bush flange type, shaft φ8mm, OD φ15mm, L=17mm, flange φ32mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=17mm | Flange OD: D1=32mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF8 | THK Linear Bush flange type, shaft φ8mm, OD φ15mm, L=24mm, flange φ32mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=24mm | Flange OD: D1=32mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF10 | THK Linear Bush flange type, shaft φ10mm, OD φ19mm, L=29mm, flange φ39mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=29mm | Flange OD: D1=39mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF12 | THK Linear Bush flange type, shaft φ12mm, OD φ21mm, L=30mm, flange φ42mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Flange OD: D1=42mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF13 | THK Linear Bush flange type, shaft φ13mm, OD φ23mm, L=32mm, flange φ43mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Flange OD: D1=43mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF16 | THK Linear Bush flange type, shaft φ16mm, OD φ28mm, L=37mm, flange φ48mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Flange OD: D1=48mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF20 | THK Linear Bush flange type, shaft φ20mm, OD φ32mm, L=42mm, flange φ54mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Flange OD: D1=54mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF25 | THK Linear Bush flange type, shaft φ25mm, OD φ40mm, L=59mm, flange φ62mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Flange OD: D1=62mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF30 | THK Linear Bush flange type, shaft φ30mm, OD φ45mm, L=64mm, flange φ74mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Flange OD: D1=74mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF35 | THK Linear Bush flange type, shaft φ35mm, OD φ52mm, L=70mm, flange φ82mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=70mm | Flange OD: D1=82mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF40 | THK Linear Bush flange type, shaft φ40mm, OD φ60mm, L=80mm, flange φ96mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=80mm | Flange OD: D1=96mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF50 | THK Linear Bush flange type, shaft φ50mm, OD φ80mm, L=100mm, flange φ116mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=80mm | Length: L=100mm | Flange OD: D1=116mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF60 | THK Linear Bush flange type, shaft φ60mm, OD φ90mm, L=110mm, flange φ134mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=110mm | Flange OD: D1=134mm | Type: Flange integrated (direct bolt mount to housing) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMF-L Linear Bush Flange Long Type (LMF6L~LMF60L)](https://img.prosourcemro.com/2026/05/001-987-300x241.png)
LMF-L type Linear Bush — flange integrated, long type. Two retainers for optimal moment load performance. Nut and flange in one piece; mounts directly to housing with bolts. Shaft diameters: 6~60mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMF-L type Linear Bush — flange integrated, long type. Two retainers for optimal moment load performance. Nut and flange in one piece; mounts directly to housing with bolts. Shaft diameters: 6~60mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMF6L | THK Linear Bush flange long type, shaft φ6mm, OD φ12mm, L=35mm, flange φ28mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=35mm | Flange OD: D1=28mm | Type: Flange integrated long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF8L | THK Linear Bush flange long type, shaft φ8mm, OD φ15mm, L=45mm, flange φ32mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=45mm | Flange OD: D1=32mm | Type: Flange integrated long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF10L | THK Linear Bush flange long type, shaft φ10mm, OD φ19mm, L=55mm, flange φ39mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=55mm | Flange OD: D1=39mm | Type: Flange integrated long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF12L | THK Linear Bush flange long type, shaft φ12mm, OD φ21mm, L=57mm, flange φ42mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=57mm | Flange OD: D1=42mm | Type: Flange integrated long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF13L | THK Linear Bush flange long type, shaft φ13mm, OD φ23mm, L=61mm, flange φ43mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=61mm | Flange OD: D1=43mm | Type: Flange integrated long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF16L | THK Linear Bush flange long type, shaft φ16mm, OD φ28mm, L=70mm, flange φ48mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=70mm | Flange OD: D1=48mm | Type: Flange integrated long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF20L | THK Linear Bush flange long type, shaft φ20mm, OD φ32mm, L=80mm, flange φ54mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=80mm | Flange OD: D1=54mm | Type: Flange integrated long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF25L | THK Linear Bush flange long type, shaft φ25mm, OD φ40mm, L=112mm, flange φ62mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=112mm | Flange OD: D1=62mm | Type: Flange integrated long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF30L | THK Linear Bush flange long type, shaft φ30mm, OD φ45mm, L=123mm, flange φ74mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=123mm | Flange OD: D1=74mm | Type: Flange integrated long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF35L | THK Linear Bush flange long type, shaft φ35mm, OD φ52mm, L=135mm, flange φ82mm | THK | Shaft Dia.: D0=35mm | Outer Dia.: D=52mm | Length: L=135mm | Flange OD: D1=82mm | Type: Flange integrated long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF40L | THK Linear Bush flange long type, shaft φ40mm, OD φ60mm, L=154mm, flange φ96mm | THK | Shaft Dia.: D0=40mm | Outer Dia.: D=60mm | Length: L=154mm | Flange OD: D1=96mm | Type: Flange integrated long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF50L | THK Linear Bush flange long type, shaft φ50mm, OD φ80mm, L=192mm, flange φ116mm | THK | Shaft Dia.: D0=50mm | Outer Dia.: D=80mm | Length: L=192mm | Flange OD: D1=116mm | Type: Flange integrated long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF60L | THK Linear Bush flange long type, shaft φ60mm, OD φ90mm, L=211mm, flange φ134mm | THK | Shaft Dia.: D0=60mm | Outer Dia.: D=90mm | Length: L=211mm | Flange OD: D1=134mm | Type: Flange integrated long type (2 retainers) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMF-M Linear Bush Flange Type Stainless Steel (LMF6M~LMF30M)](https://img.prosourcemro.com/2026/05/001-986-300x241.png)
LMF-M type Linear Bush — flange integrated, stainless steel. Nut and flange in one piece; mounts directly to housing with bolts. Stainless steel nut and balls for corrosion resistance. Shaft diameters: 6~30mm. Short type (LMF8SM) available for φ8mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMF-M type Linear Bush — flange integrated, stainless steel. Nut and flange in one piece; mounts directly to housing with bolts. Stainless steel nut and balls for corrosion resistance. Shaft diameters: 6~30mm. Short type (LMF8SM) available for φ8mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMF6M | THK Linear Bush flange stainless, shaft φ6mm, OD φ12mm, L=19mm, flange φ28mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=19mm | Flange OD: D1=28mm | Type: Flange integrated (direct bolt mount to housing) | Material: Stainless steel (nut and balls) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF8SM | THK Linear Bush flange stainless, shaft φ8mm, OD φ15mm, L=17mm, flange φ32mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=17mm | Flange OD: D1=32mm | Type: Flange integrated (direct bolt mount to housing) | Material: Stainless steel (nut and balls) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF8M | THK Linear Bush flange stainless, shaft φ8mm, OD φ15mm, L=24mm, flange φ32mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=24mm | Flange OD: D1=32mm | Type: Flange integrated (direct bolt mount to housing) | Material: Stainless steel (nut and balls) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF10M | THK Linear Bush flange stainless, shaft φ10mm, OD φ19mm, L=29mm, flange φ39mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=29mm | Flange OD: D1=39mm | Type: Flange integrated (direct bolt mount to housing) | Material: Stainless steel (nut and balls) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF12M | THK Linear Bush flange stainless, shaft φ12mm, OD φ21mm, L=30mm, flange φ42mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Flange OD: D1=42mm | Type: Flange integrated (direct bolt mount to housing) | Material: Stainless steel (nut and balls) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF13M | THK Linear Bush flange stainless, shaft φ13mm, OD φ23mm, L=32mm, flange φ43mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Flange OD: D1=43mm | Type: Flange integrated (direct bolt mount to housing) | Material: Stainless steel (nut and balls) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF16M | THK Linear Bush flange stainless, shaft φ16mm, OD φ28mm, L=37mm, flange φ48mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Flange OD: D1=48mm | Type: Flange integrated (direct bolt mount to housing) | Material: Stainless steel (nut and balls) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF20M | THK Linear Bush flange stainless, shaft φ20mm, OD φ32mm, L=42mm, flange φ54mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Flange OD: D1=54mm | Type: Flange integrated (direct bolt mount to housing) | Material: Stainless steel (nut and balls) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF25M | THK Linear Bush flange stainless, shaft φ25mm, OD φ40mm, L=59mm, flange φ62mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Flange OD: D1=62mm | Type: Flange integrated (direct bolt mount to housing) | Material: Stainless steel (nut and balls) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF30M | THK Linear Bush flange stainless, shaft φ30mm, OD φ45mm, L=64mm, flange φ74mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Flange OD: D1=74mm | Type: Flange integrated (direct bolt mount to housing) | Material: Stainless steel (nut and balls) | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMF-ML Linear Bush Flange Long Type Stainless Steel (LMF6ML~LMF30ML)](https://img.prosourcemro.com/2026/05/001-988-300x241.png)
LMF-ML type Linear Bush — flange integrated, long type, stainless steel. Two retainers for optimal moment load performance. Nut and flange in one piece; mounts directly to housing with bolts. Stainless steel nut and balls for corrosion resistance. Shaft diameters: 6~30mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMF-ML type Linear Bush — flange integrated, long type, stainless steel. Two retainers for optimal moment load performance. Nut and flange in one piece; mounts directly to housing with bolts. Stainless steel nut and balls for corrosion resistance. Shaft diameters: 6~30mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMF6ML | THK Linear Bush flange long stainless, shaft φ6mm, OD φ12mm, L=35mm, flange φ28mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=35mm | Flange OD: D1=28mm | Type: Flange integrated long type (2 retainers) | Material: Stainless steel (nut and balls) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF8ML | THK Linear Bush flange long stainless, shaft φ8mm, OD φ15mm, L=45mm, flange φ32mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=45mm | Flange OD: D1=32mm | Type: Flange integrated long type (2 retainers) | Material: Stainless steel (nut and balls) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF10ML | THK Linear Bush flange long stainless, shaft φ10mm, OD φ19mm, L=55mm, flange φ39mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=55mm | Flange OD: D1=39mm | Type: Flange integrated long type (2 retainers) | Material: Stainless steel (nut and balls) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF12ML | THK Linear Bush flange long stainless, shaft φ12mm, OD φ21mm, L=57mm, flange φ42mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=57mm | Flange OD: D1=42mm | Type: Flange integrated long type (2 retainers) | Material: Stainless steel (nut and balls) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF13ML | THK Linear Bush flange long stainless, shaft φ13mm, OD φ23mm, L=61mm, flange φ43mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=61mm | Flange OD: D1=43mm | Type: Flange integrated long type (2 retainers) | Material: Stainless steel (nut and balls) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF16ML | THK Linear Bush flange long stainless, shaft φ16mm, OD φ28mm, L=70mm, flange φ48mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=70mm | Flange OD: D1=48mm | Type: Flange integrated long type (2 retainers) | Material: Stainless steel (nut and balls) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF20ML | THK Linear Bush flange long stainless, shaft φ20mm, OD φ32mm, L=80mm, flange φ54mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=80mm | Flange OD: D1=54mm | Type: Flange integrated long type (2 retainers) | Material: Stainless steel (nut and balls) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF25ML | THK Linear Bush flange long stainless, shaft φ25mm, OD φ40mm, L=112mm, flange φ62mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=112mm | Flange OD: D1=62mm | Type: Flange integrated long type (2 retainers) | Material: Stainless steel (nut and balls) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMF30ML | THK Linear Bush flange long stainless, shaft φ30mm, OD φ45mm, L=123mm, flange φ74mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=123mm | Flange OD: D1=74mm | Type: Flange integrated long type (2 retainers) | Material: Stainless steel (nut and balls) | Feature: Suitable for moment load applications | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMH Linear Bush Small Plate Flange Type (LMH6~LMH30)](https://img.prosourcemro.com/2026/05/001-996-300x241.png)
LMH type Linear Bush — small plate (compact square) flange type. Flange and outer shell in one piece; lower center height than LMK type for ultra-compact design. Ball circuits aligned so 2 circuits carry load in the flat direction — improved service life. Shaft diameters: 6~30mm. Short type (LMH8S) available for φ8mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMH type Linear Bush — small plate (compact square) flange type. Flange and outer shell in one piece; lower center height than LMK type for ultra-compact design. Ball circuits aligned so 2 circuits carry load in the flat direction — improved service life. Shaft diameters: 6~30mm. Short type (LMH8S) available for φ8mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMH6 | THK Linear Bush small plate flange, shaft φ6mm, OD φ12mm, L=19mm, K=18mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=19mm | Flange OD: D1=28mm | Square Width: K=18mm | Type: Small plate flange (ultra-compact, lower than LMK) | Feature: 2 ball circuits in flat direction for improved life | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH8S | THK Linear Bush small plate flange, shaft φ8mm, OD φ15mm, L=17mm, K=21mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=17mm | Flange OD: D1=32mm | Square Width: K=21mm | Type: Small plate flange (ultra-compact, lower than LMK) | Feature: 2 ball circuits in flat direction for improved life | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH8 | THK Linear Bush small plate flange, shaft φ8mm, OD φ15mm, L=24mm, K=21mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=24mm | Flange OD: D1=32mm | Square Width: K=21mm | Type: Small plate flange (ultra-compact, lower than LMK) | Feature: 2 ball circuits in flat direction for improved life | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH10 | THK Linear Bush small plate flange, shaft φ10mm, OD φ19mm, L=29mm, K=25mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=29mm | Flange OD: D1=39mm | Square Width: K=25mm | Type: Small plate flange (ultra-compact, lower than LMK) | Feature: 2 ball circuits in flat direction for improved life | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH12 | THK Linear Bush small plate flange, shaft φ12mm, OD φ21mm, L=30mm, K=27mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Flange OD: D1=42mm | Square Width: K=27mm | Type: Small plate flange (ultra-compact, lower than LMK) | Feature: 2 ball circuits in flat direction for improved life | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH13 | THK Linear Bush small plate flange, shaft φ13mm, OD φ23mm, L=32mm, K=29mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Flange OD: D1=43mm | Square Width: K=29mm | Type: Small plate flange (ultra-compact, lower than LMK) | Feature: 2 ball circuits in flat direction for improved life | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH16 | THK Linear Bush small plate flange, shaft φ16mm, OD φ28mm, L=37mm, K=34mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Flange OD: D1=48mm | Square Width: K=34mm | Type: Small plate flange (ultra-compact, lower than LMK) | Feature: 2 ball circuits in flat direction for improved life | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH20 | THK Linear Bush small plate flange, shaft φ20mm, OD φ32mm, L=42mm, K=38mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Flange OD: D1=54mm | Square Width: K=38mm | Type: Small plate flange (ultra-compact, lower than LMK) | Feature: 2 ball circuits in flat direction for improved life | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH25 | THK Linear Bush small plate flange, shaft φ25mm, OD φ40mm, L=59mm, K=46mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Flange OD: D1=62mm | Square Width: K=46mm | Type: Small plate flange (ultra-compact, lower than LMK) | Feature: 2 ball circuits in flat direction for improved life | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH30 | THK Linear Bush small plate flange, shaft φ30mm, OD φ45mm, L=64mm, K=51mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=64mm | Flange OD: D1=74mm | Square Width: K=51mm | Type: Small plate flange (ultra-compact, lower than LMK) | Feature: 2 ball circuits in flat direction for improved life | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMH-L Linear Bush Small Plate Flange Long Type (LMH6L~LMH30L)](https://img.prosourcemro.com/2026/05/001-997-300x251.png)
LMH-L type Linear Bush — small plate flange, long type. Lower center height than LMK-L type for ultra-compact design. Two retainers for optimal moment load performance. 2 ball circuits in flat direction for improved service life. Shaft diameters: 6~30mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMH-L type Linear Bush — small plate flange, long type. Lower center height than LMK-L type for ultra-compact design. Two retainers for optimal moment load performance. 2 ball circuits in flat direction for improved service life. Shaft diameters: 6~30mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMH6L | THK Linear Bush small plate flange long, shaft φ6mm, OD φ12mm, L=35mm, K=18mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=35mm | Flange OD: D1=28mm | Square Width: K=18mm | Type: Small plate flange long type (2 retainers) | Feature: Lower center height than LMK-L; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH8L | THK Linear Bush small plate flange long, shaft φ8mm, OD φ15mm, L=45mm, K=21mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=45mm | Flange OD: D1=32mm | Square Width: K=21mm | Type: Small plate flange long type (2 retainers) | Feature: Lower center height than LMK-L; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH10L | THK Linear Bush small plate flange long, shaft φ10mm, OD φ19mm, L=55mm, K=25mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=55mm | Flange OD: D1=39mm | Square Width: K=25mm | Type: Small plate flange long type (2 retainers) | Feature: Lower center height than LMK-L; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH12L | THK Linear Bush small plate flange long, shaft φ12mm, OD φ21mm, L=57mm, K=27mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=57mm | Flange OD: D1=42mm | Square Width: K=27mm | Type: Small plate flange long type (2 retainers) | Feature: Lower center height than LMK-L; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH13L | THK Linear Bush small plate flange long, shaft φ13mm, OD φ23mm, L=61mm, K=29mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=61mm | Flange OD: D1=43mm | Square Width: K=29mm | Type: Small plate flange long type (2 retainers) | Feature: Lower center height than LMK-L; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH16L | THK Linear Bush small plate flange long, shaft φ16mm, OD φ28mm, L=70mm, K=34mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=70mm | Flange OD: D1=48mm | Square Width: K=34mm | Type: Small plate flange long type (2 retainers) | Feature: Lower center height than LMK-L; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH20L | THK Linear Bush small plate flange long, shaft φ20mm, OD φ32mm, L=80mm, K=38mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=80mm | Flange OD: D1=54mm | Square Width: K=38mm | Type: Small plate flange long type (2 retainers) | Feature: Lower center height than LMK-L; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH25L | THK Linear Bush small plate flange long, shaft φ25mm, OD φ40mm, L=112mm, K=46mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=112mm | Flange OD: D1=62mm | Square Width: K=46mm | Type: Small plate flange long type (2 retainers) | Feature: Lower center height than LMK-L; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMH30L | THK Linear Bush small plate flange long, shaft φ30mm, OD φ45mm, L=123mm, K=51mm | THK | Shaft Dia.: D0=30mm | Outer Dia.: D=45mm | Length: L=123mm | Flange OD: D1=74mm | Square Width: K=51mm | Type: Small plate flange long type (2 retainers) | Feature: Lower center height than LMK-L; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMIF Linear Bush Inlaid Flange Type Round (LMIF6~LMIF25)](https://img.prosourcemro.com/2026/05/001-989-300x241.png)
LMIF type Linear Bush — inlaid (spigot) flange type, round. Short spigot prevents bush from protruding to the opposite side. Direct bolt mount to housing. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMIF type Linear Bush — inlaid (spigot) flange type, round. Short spigot prevents bush from protruding to the opposite side. Direct bolt mount to housing. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMIF6 | THK Linear Bush inlaid flange, shaft φ6mm, OD φ12mm, L=19mm, flange φ28mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=19mm | Flange OD: D1=28mm | Type: Inlaid flange (spigot, round) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF8 | THK Linear Bush inlaid flange, shaft φ8mm, OD φ15mm, L=24mm, flange φ32mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=24mm | Flange OD: D1=32mm | Type: Inlaid flange (spigot, round) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF10 | THK Linear Bush inlaid flange, shaft φ10mm, OD φ19mm, L=29mm, flange φ39mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=29mm | Flange OD: D1=39mm | Type: Inlaid flange (spigot, round) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF12 | THK Linear Bush inlaid flange, shaft φ12mm, OD φ21mm, L=30mm, flange φ42mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Flange OD: D1=42mm | Type: Inlaid flange (spigot, round) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF13 | THK Linear Bush inlaid flange, shaft φ13mm, OD φ23mm, L=32mm, flange φ43mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Flange OD: D1=43mm | Type: Inlaid flange (spigot, round) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF16 | THK Linear Bush inlaid flange, shaft φ16mm, OD φ28mm, L=37mm, flange φ48mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Flange OD: D1=48mm | Type: Inlaid flange (spigot, round) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF20 | THK Linear Bush inlaid flange, shaft φ20mm, OD φ32mm, L=42mm, flange φ54mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Flange OD: D1=54mm | Type: Inlaid flange (spigot, round) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF25 | THK Linear Bush inlaid flange, shaft φ25mm, OD φ40mm, L=59mm, flange φ62mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Flange OD: D1=62mm | Type: Inlaid flange (spigot, round) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMIF-L Linear Bush Inlaid Flange Long Type (LMIF6L~LMIF25L)](https://img.prosourcemro.com/2026/05/001-990-300x241.png)
LMIF-L type Linear Bush — inlaid (spigot) flange, long type. Short spigot prevents bush from protruding to the opposite side; excellent space efficiency on the non-flange side. Two retainers for moment load applications. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMIF-L type Linear Bush — inlaid (spigot) flange, long type. Short spigot prevents bush from protruding to the opposite side; excellent space efficiency on the non-flange side. Two retainers for moment load applications. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMIF6L | THK Linear Bush inlaid flange long, shaft φ6mm, OD φ12mm, L=35mm, flange φ28mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=35mm | Flange OD: D1=28mm | Type: Inlaid flange long type (2 retainers) | Feature: Short spigot; space-efficient on non-flange side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF8L | THK Linear Bush inlaid flange long, shaft φ8mm, OD φ15mm, L=45mm, flange φ32mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=45mm | Flange OD: D1=32mm | Type: Inlaid flange long type (2 retainers) | Feature: Short spigot; space-efficient on non-flange side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF10L | THK Linear Bush inlaid flange long, shaft φ10mm, OD φ19mm, L=55mm, flange φ39mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=55mm | Flange OD: D1=39mm | Type: Inlaid flange long type (2 retainers) | Feature: Short spigot; space-efficient on non-flange side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF12L | THK Linear Bush inlaid flange long, shaft φ12mm, OD φ21mm, L=57mm, flange φ42mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=57mm | Flange OD: D1=42mm | Type: Inlaid flange long type (2 retainers) | Feature: Short spigot; space-efficient on non-flange side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF13L | THK Linear Bush inlaid flange long, shaft φ13mm, OD φ23mm, L=61mm, flange φ43mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=61mm | Flange OD: D1=43mm | Type: Inlaid flange long type (2 retainers) | Feature: Short spigot; space-efficient on non-flange side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF16L | THK Linear Bush inlaid flange long, shaft φ16mm, OD φ28mm, L=70mm, flange φ48mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=70mm | Flange OD: D1=48mm | Type: Inlaid flange long type (2 retainers) | Feature: Short spigot; space-efficient on non-flange side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF20L | THK Linear Bush inlaid flange long, shaft φ20mm, OD φ32mm, L=80mm, flange φ54mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=80mm | Flange OD: D1=54mm | Type: Inlaid flange long type (2 retainers) | Feature: Short spigot; space-efficient on non-flange side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIF25L | THK Linear Bush inlaid flange long, shaft φ25mm, OD φ40mm, L=112mm, flange φ62mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=112mm | Flange OD: D1=62mm | Type: Inlaid flange long type (2 retainers) | Feature: Short spigot; space-efficient on non-flange side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMIH Linear Bush Inlaid Small Plate Flange Type (LMIH6~LMIH25)](https://img.prosourcemro.com/2026/05/001-1001-300x250.png)
LMIH type Linear Bush — inlaid small plate flange type. Lower center height than LMIF type for ultra-compact design. Short spigot prevents bush from protruding to opposite side. 2 ball circuits in flat direction for improved service life. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMIH type Linear Bush — inlaid small plate flange type. Lower center height than LMIF type for ultra-compact design. Short spigot prevents bush from protruding to opposite side. 2 ball circuits in flat direction for improved service life. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMIH6 | THK Linear Bush inlaid small plate flange, shaft φ6mm, OD φ12mm, L=19mm, K=18mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=19mm | Flange OD: D1=28mm | Square Width: K=18mm | Type: Inlaid small plate flange | Feature: Lower than LMIF; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH8 | THK Linear Bush inlaid small plate flange, shaft φ8mm, OD φ15mm, L=24mm, K=21mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=24mm | Flange OD: D1=32mm | Square Width: K=21mm | Type: Inlaid small plate flange | Feature: Lower than LMIF; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH10 | THK Linear Bush inlaid small plate flange, shaft φ10mm, OD φ19mm, L=29mm, K=25mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=29mm | Flange OD: D1=39mm | Square Width: K=25mm | Type: Inlaid small plate flange | Feature: Lower than LMIF; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH12 | THK Linear Bush inlaid small plate flange, shaft φ12mm, OD φ21mm, L=30mm, K=27mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Flange OD: D1=42mm | Square Width: K=27mm | Type: Inlaid small plate flange | Feature: Lower than LMIF; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH13 | THK Linear Bush inlaid small plate flange, shaft φ13mm, OD φ23mm, L=32mm, K=29mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Flange OD: D1=43mm | Square Width: K=29mm | Type: Inlaid small plate flange | Feature: Lower than LMIF; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH16 | THK Linear Bush inlaid small plate flange, shaft φ16mm, OD φ28mm, L=37mm, K=34mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Flange OD: D1=48mm | Square Width: K=34mm | Type: Inlaid small plate flange | Feature: Lower than LMIF; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH20 | THK Linear Bush inlaid small plate flange, shaft φ20mm, OD φ32mm, L=42mm, K=38mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Flange OD: D1=54mm | Square Width: K=38mm | Type: Inlaid small plate flange | Feature: Lower than LMIF; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH25 | THK Linear Bush inlaid small plate flange, shaft φ25mm, OD φ40mm, L=59mm, K=46mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Flange OD: D1=62mm | Square Width: K=46mm | Type: Inlaid small plate flange | Feature: Lower than LMIF; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMIH-L Linear Bush Inlaid Small Plate Flange Long Type (LMIH6L~LMIH25L)](https://img.prosourcemro.com/2026/05/001-1002-300x240.png)
LMIH-L type Linear Bush — inlaid small plate flange, long type. Lower center height than LMIF-L for ultra-compact design. Two retainers for optimal moment load performance. Short spigot; 2 ball circuits in flat direction for improved service life. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMIH-L type Linear Bush — inlaid small plate flange, long type. Lower center height than LMIF-L for ultra-compact design. Two retainers for optimal moment load performance. Short spigot; 2 ball circuits in flat direction for improved service life. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMIH6L | THK Linear Bush inlaid small plate flange long, shaft φ6mm, OD φ12mm, L=35mm, K=18mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=35mm | Flange OD: D1=28mm | Square Width: K=18mm | Type: Inlaid small plate flange long type (2 retainers) | Feature: Lower than LMIF-L; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH8L | THK Linear Bush inlaid small plate flange long, shaft φ8mm, OD φ15mm, L=45mm, K=21mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=45mm | Flange OD: D1=32mm | Square Width: K=21mm | Type: Inlaid small plate flange long type (2 retainers) | Feature: Lower than LMIF-L; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH10L | THK Linear Bush inlaid small plate flange long, shaft φ10mm, OD φ19mm, L=55mm, K=25mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=55mm | Flange OD: D1=39mm | Square Width: K=25mm | Type: Inlaid small plate flange long type (2 retainers) | Feature: Lower than LMIF-L; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH12L | THK Linear Bush inlaid small plate flange long, shaft φ12mm, OD φ21mm, L=57mm, K=27mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=57mm | Flange OD: D1=42mm | Square Width: K=27mm | Type: Inlaid small plate flange long type (2 retainers) | Feature: Lower than LMIF-L; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH13L | THK Linear Bush inlaid small plate flange long, shaft φ13mm, OD φ23mm, L=61mm, K=29mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=61mm | Flange OD: D1=43mm | Square Width: K=29mm | Type: Inlaid small plate flange long type (2 retainers) | Feature: Lower than LMIF-L; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH16L | THK Linear Bush inlaid small plate flange long, shaft φ16mm, OD φ28mm, L=70mm, K=34mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=70mm | Flange OD: D1=48mm | Square Width: K=34mm | Type: Inlaid small plate flange long type (2 retainers) | Feature: Lower than LMIF-L; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH20L | THK Linear Bush inlaid small plate flange long, shaft φ20mm, OD φ32mm, L=80mm, K=38mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=80mm | Flange OD: D1=54mm | Square Width: K=38mm | Type: Inlaid small plate flange long type (2 retainers) | Feature: Lower than LMIF-L; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIH25L | THK Linear Bush inlaid small plate flange long, shaft φ25mm, OD φ40mm, L=112mm, K=46mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=112mm | Flange OD: D1=62mm | Square Width: K=46mm | Type: Inlaid small plate flange long type (2 retainers) | Feature: Lower than LMIF-L; short spigot; 2 circuits in flat direction | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMIK Linear Bush Inlaid Square Flange Type (LMIK6~LMIK25)](https://img.prosourcemro.com/2026/05/001-998-300x245.png)
LMIK type Linear Bush — inlaid (spigot) square flange type. 4-flat version of LMIF; lower center height than round inlaid flange for compact design. Short spigot prevents bush from protruding to opposite side. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMIK type Linear Bush — inlaid (spigot) square flange type. 4-flat version of LMIF; lower center height than round inlaid flange for compact design. Short spigot prevents bush from protruding to opposite side. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMIK6 | THK Linear Bush inlaid square flange, shaft φ6mm, OD φ12mm, L=19mm, K=22mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=19mm | Flange OD: D1=28mm | Square Width: K=22mm | Type: Inlaid square flange (4-flat, compact center height) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK8 | THK Linear Bush inlaid square flange, shaft φ8mm, OD φ15mm, L=24mm, K=25mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=24mm | Flange OD: D1=32mm | Square Width: K=25mm | Type: Inlaid square flange (4-flat, compact center height) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK10 | THK Linear Bush inlaid square flange, shaft φ10mm, OD φ19mm, L=29mm, K=30mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=29mm | Flange OD: D1=39mm | Square Width: K=30mm | Type: Inlaid square flange (4-flat, compact center height) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK12 | THK Linear Bush inlaid square flange, shaft φ12mm, OD φ21mm, L=30mm, K=32mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Flange OD: D1=42mm | Square Width: K=32mm | Type: Inlaid square flange (4-flat, compact center height) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK13 | THK Linear Bush inlaid square flange, shaft φ13mm, OD φ23mm, L=32mm, K=34mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=32mm | Flange OD: D1=43mm | Square Width: K=34mm | Type: Inlaid square flange (4-flat, compact center height) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK16 | THK Linear Bush inlaid square flange, shaft φ16mm, OD φ28mm, L=37mm, K=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Flange OD: D1=48mm | Square Width: K=37mm | Type: Inlaid square flange (4-flat, compact center height) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK20 | THK Linear Bush inlaid square flange, shaft φ20mm, OD φ32mm, L=42mm, K=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Flange OD: D1=54mm | Square Width: K=42mm | Type: Inlaid square flange (4-flat, compact center height) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK25 | THK Linear Bush inlaid square flange, shaft φ25mm, OD φ40mm, L=59mm, K=50mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Flange OD: D1=62mm | Square Width: K=50mm | Type: Inlaid square flange (4-flat, compact center height) | Feature: Short spigot; no protrusion to opposite side | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMIK-L Linear Bush Inlaid Square Flange Long Type (LMIK6L~LMIK25L)](https://img.prosourcemro.com/2026/05/001-999-300x240.png)
LMIK-L type Linear Bush — inlaid square flange, long type. 4-flat version of LMIF-L; lower center height than round inlaid flange for compact design. Two retainers for optimal moment load performance. Short spigot prevents bush from protruding to opposite side. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
LMIK-L type Linear Bush — inlaid square flange, long type. 4-flat version of LMIF-L; lower center height than round inlaid flange for compact design. Two retainers for optimal moment load performance. Short spigot prevents bush from protruding to opposite side. Shaft diameters: 6~25mm. Synthetic resin retainer (max 80°C). Oil hole option (suffix OH).
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMIK6L | THK Linear Bush inlaid square flange long, shaft φ6mm, OD φ12mm, L=35mm, K=22mm | THK | Shaft Dia.: D0=6mm | Outer Dia.: D=12mm | Length: L=35mm | Flange OD: D1=28mm | Square Width: K=22mm | Type: Inlaid square flange long type (2 retainers) | Feature: Short spigot; compact center height; moment load capable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK8L | THK Linear Bush inlaid square flange long, shaft φ8mm, OD φ15mm, L=45mm, K=25mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=45mm | Flange OD: D1=32mm | Square Width: K=25mm | Type: Inlaid square flange long type (2 retainers) | Feature: Short spigot; compact center height; moment load capable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK10L | THK Linear Bush inlaid square flange long, shaft φ10mm, OD φ19mm, L=55mm, K=30mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=55mm | Flange OD: D1=39mm | Square Width: K=30mm | Type: Inlaid square flange long type (2 retainers) | Feature: Short spigot; compact center height; moment load capable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK12L | THK Linear Bush inlaid square flange long, shaft φ12mm, OD φ21mm, L=57mm, K=32mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=57mm | Flange OD: D1=42mm | Square Width: K=32mm | Type: Inlaid square flange long type (2 retainers) | Feature: Short spigot; compact center height; moment load capable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK13L | THK Linear Bush inlaid square flange long, shaft φ13mm, OD φ23mm, L=61mm, K=34mm | THK | Shaft Dia.: D0=13mm | Outer Dia.: D=23mm | Length: L=61mm | Flange OD: D1=43mm | Square Width: K=34mm | Type: Inlaid square flange long type (2 retainers) | Feature: Short spigot; compact center height; moment load capable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK16L | THK Linear Bush inlaid square flange long, shaft φ16mm, OD φ28mm, L=70mm, K=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=70mm | Flange OD: D1=48mm | Square Width: K=37mm | Type: Inlaid square flange long type (2 retainers) | Feature: Short spigot; compact center height; moment load capable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK20L | THK Linear Bush inlaid square flange long, shaft φ20mm, OD φ32mm, L=80mm, K=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=80mm | Flange OD: D1=54mm | Square Width: K=42mm | Type: Inlaid square flange long type (2 retainers) | Feature: Short spigot; compact center height; moment load capable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order | |
| LMIK25L | THK Linear Bush inlaid square flange long, shaft φ25mm, OD φ40mm, L=112mm, K=50mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=112mm | Flange OD: D1=62mm | Square Width: K=50mm | Type: Inlaid square flange long type (2 retainers) | Feature: Short spigot; compact center height; moment load capable | Max Temp.: 80°C (standard retainer) | Oil Hole: Add suffix OH on order |
![[THK] — LMJK Linear Bush Plastic Square Flange Type (LMJK8~LMJK25)](https://img.prosourcemro.com/2026/05/001-1004-300x239.png)
LMJK type Linear Bush — high-strength plastic square flange. Lighter weight than metal flange type. Shaft diameters: 8~25mm. Synthetic resin retainer (max 80°C). Seal option available on order.
LMJK type Linear Bush — high-strength plastic square flange. Lighter weight than metal flange type. Shaft diameters: 8~25mm. Synthetic resin retainer (max 80°C). Seal option available on order.
| Product Code | Description | Brand | Spec | |
|---|---|---|---|---|
| LMJK8 | THK Linear Bush plastic square flange, shaft φ8mm, OD φ15mm, L=24mm, K=25mm | THK | Shaft Dia.: D0=8mm | Outer Dia.: D=15mm | Length: L=24mm | Flange OD: D1=32mm | Square Width: K=25mm | Flange Material: High-strength plastic (lightweight) | Max Temp.: 80°C | Seal: Optional on order | |
| LMJK10 | THK Linear Bush plastic square flange, shaft φ10mm, OD φ19mm, L=29mm, K=30mm | THK | Shaft Dia.: D0=10mm | Outer Dia.: D=19mm | Length: L=29mm | Flange OD: D1=39mm | Square Width: K=30mm | Flange Material: High-strength plastic (lightweight) | Max Temp.: 80°C | Seal: Optional on order | |
| LMJK12 | THK Linear Bush plastic square flange, shaft φ12mm, OD φ21mm, L=30mm, K=32mm | THK | Shaft Dia.: D0=12mm | Outer Dia.: D=21mm | Length: L=30mm | Flange OD: D1=42mm | Square Width: K=32mm | Flange Material: High-strength plastic (lightweight) | Max Temp.: 80°C | Seal: Optional on order | |
| LMJK16 | THK Linear Bush plastic square flange, shaft φ16mm, OD φ28mm, L=37mm, K=37mm | THK | Shaft Dia.: D0=16mm | Outer Dia.: D=28mm | Length: L=37mm | Flange OD: D1=48mm | Square Width: K=37mm | Flange Material: High-strength plastic (lightweight) | Max Temp.: 80°C | Seal: Optional on order | |
| LMJK20 | THK Linear Bush plastic square flange, shaft φ20mm, OD φ32mm, L=42mm, K=42mm | THK | Shaft Dia.: D0=20mm | Outer Dia.: D=32mm | Length: L=42mm | Flange OD: D1=54mm | Square Width: K=42mm | Flange Material: High-strength plastic (lightweight) | Max Temp.: 80°C | Seal: Optional on order | |
| LMJK25 | THK Linear Bush plastic square flange, shaft φ25mm, OD φ40mm, L=59mm, K=50mm | THK | Shaft Dia.: D0=25mm | Outer Dia.: D=40mm | Length: L=59mm | Flange OD: D1=62mm | Square Width: K=50mm | Flange Material: High-strength plastic (lightweight) | Max Temp.: 80°C | Seal: Optional on order |