Automation

Type 4 ESPE (AOPD) safety light curtains compliant with SIL3, SIL CL3, Category 4, PLe. Three detection types: finger (Ø 14 mm), hand (Ø 20 mm), hand-body (Ø 30 mm). 0.2-10/15 m sensing distance with short/long mode switch. NPN/PNP OSSD output selectable. Various protective heights from 144 to 1868 mm. Up to 3-set series connection. CE, UKCA, UL Listed, S-Mark, KCs certified. IP65/IP67/IP67G/IP69K rated.

Advanced Type 4 ESPE safety light curtains with software configuration via atLightCurtain. All SFL features plus: muting/override, blanking (fixed/floating), reduced resolution, 4 non-safety outputs (2 AUX, 2 lamp), self-diagnostics, alarm for incident light reduction. Up to 4-set series connection. SIL3, Category 4, PLe certified. IP65/IP67/IP67G/IP69K rated.

Electromagnetic non-contact safety door switches. ON: ≥ 5 mm, OFF: ≤ 15 mm distance. Up to 30 units controlled by single SFC-N controller. U-shaped design with 2-color operation indicators visible from 3 sides (ON: green, OFF: red). Stable detection in front/rear, top/bottom, right/left direction doors. Cable type (2 m, 5 m) and cable connector models. Life expectancy ≥ 20,000,000 operations.

Force-guided contact safety relays compliant with IEC 61810-3. Used with SFT terminal blocks for safe control system operation. Panasonic-based mechanism for high reliability. 4-pole and 6-pole variants with various NO/NC contact configurations. 24 VDC coil voltage. Plug-in socket type for easy replacement.

Safety relay terminal blocks with force-guided contacts for safe control system operation (IEC 61810-3). 4-pole and 6-pole models with various NO/NC contact configurations. Screw and screwless terminal types. 250 VAC/30 VDC switching capability, 6 A continuous current. Operation indicator (green LED). DIN rail and screw mount installation.

Panel mount switching mode power supplies. 30 W to 100 W output range. 5 VDC, 12 VDC, and 24 VDC output options. Built-in over-current protection, output short-circuit protection. Universal AC input 100-240 VAC. Compact panel-mount form factor for control cabinets.

High-power panel mount switching mode power supply. 400 W output at 24 VDC. For high-current industrial applications requiring stable 24 VDC bus. Universal AC input.

DIN-rail mount switching mode power supplies. Wide lineup from 15 W to 480 W. PFC circuit for improved power factor. Compact size for maximum space efficiency. Output indicator (green LED) and low voltage indicator (red LED). Over-current, over-voltage, output short-circuit, and overheating protection. Wide ambient temperature range -20 to 70 °C. Parallel operation supported. EN61000-6-2/-6-4 compliant. IP20 rated.

Cost-effective single-phase power controllers. 1Ph 220 VAC operation. 4-20 mA or 0-10 V control input. Phase control mode. Various current ratings.

Slim single-phase and 3-phase power controllers. Compact form factor for space-constrained panels. Multiple current ratings (15-100 A). 4-20 mA and RS485 communication for control. Phase control and cycle control modes.

Multi-channel single-phase or 3-phase power controllers. Wide rated voltage range 220-440 VAC. Multiple current ratings 25/40/55/70/90/110/160 A. 4-line LCD display for monitoring load current/voltage/output/resistance/heatsink temperature/power. Detachable display module. Auto control via 4-20 mA, 0-5/1-5/0-10 V, external adjuster, RS485, or EtherCAT. SCCR rating 100 kA (UL).

□ 30 mm square push button switches. Modern square aesthetic for control panels. Momentary and latching. Non-illuminated and LED variants.

Single-phase solid state relays with detachable heatsink. Heatsink can be replaced separately for maintenance. 20/40/60/90 A load current ratings. DC and AC control input variants. Suitable for higher-power applications than integrated-heatsink models.

Three-phase solid state relays for 3-phase load switching. SR3 (detachable heatsink) and SRH3 (integrated heatsink) variants. DC and AC control input options. For 3-phase motor and heater control applications.

Slim single-phase solid state relays with detachable heatsink. Reduced footprint for space-constrained installations. Lower current ratings than SR1.

Single-phase solid state relays with integrated ceramic PCB heatsink for high heat dissipation efficiency. Current input (4-20 mA) and voltage input (DC/AC) variants. Phase control (power equality / phase equality) and cycle control (variable / fixed) modes selectable via jumper. DIN-rail or panel mount. Improved dielectric strength 4000 VAC. 20/30/60 A load current ratings.

Single-phase SSR with integrated heatsink and alarm output. Detects open-circuit, short-circuit, and overheat faults. Alarm output for system-level fault response. Same load ratings as SRH1.

Plug-in socket type single-phase solid state relays with detachable heatsink. Easy replacement via socket mounting. Lower current ratings for low-power switching.

1-channel digital temperature indicators (display-only, no control output). T3 (W 48 x H 24 mm) and T4 (W 48 x H 48 mm) sizes. Universal RTD/TC input.

Thumbwheel switch temperature controllers for direct setpoint via mechanical switches. T3 (W 48 x H 24 mm) and T4 (W 48 x H 48 mm) sizes. RTD/TC input.