🔍 Can't find your part? We source far beyond this catalog — list any MRO part, even if it's not listed here, and we'll quote it direct from Korean makers.

Linear Motion

486 products linear-motion ✕

[THK] — BNS-B Ball Screw / Spline Combined Unit (Linear + Rotary, φ16~25)

THK BNS-B Series Ball Screw / Ball Spline Combined Unit (Compact Type). Ball screw and ball spline grooves machined on a single shaft — enables three motion modes (rotation, linear, and helical) with one axis. Integrated support bearing on nut OD. DN value 70,000. Shaft diameter range φ16~25mm. Custom shaft length available.

Brand: THK Category: Ball Screws 9 models

Product Code	Description	Brand	Spec
BNS1616B+C3	THK BNS1616B, φ16 Lead16, C3	THK	Shaft Diameter: φ16mm \| Lead: 16mm \| Ball Screw Ca: 3.9kN / C0a: 7.2kN \| Ball Spline C: 8.4kN / C0: 13.4kN \| Nut OD D: 48mm \| Flange D1: 64mm \| Ball Screw Nut Length L1: 40mm \| Grade: C3 \| Shaft Length: Custom order \| DN Value: 70,000 \| Type: Ball Screw + Ball Spline Combined (BNS-B)
BNS1616B+C5	THK BNS1616B, φ16 Lead16, C5	THK	Shaft Diameter: φ16mm \| Lead: 16mm \| Ball Screw Ca: 3.9kN / C0a: 7.2kN \| Ball Spline C: 8.4kN / C0: 13.4kN \| Nut OD D: 48mm \| Flange D1: 64mm \| Ball Screw Nut Length L1: 40mm \| Grade: C5 \| Shaft Length: Custom order \| DN Value: 70,000 \| Type: Ball Screw + Ball Spline Combined (BNS-B)
BNS1616B+C7	THK BNS1616B, φ16 Lead16, C7	THK	Shaft Diameter: φ16mm \| Lead: 16mm \| Ball Screw Ca: 3.9kN / C0a: 7.2kN \| Ball Spline C: 8.4kN / C0: 13.4kN \| Nut OD D: 48mm \| Flange D1: 64mm \| Ball Screw Nut Length L1: 40mm \| Grade: C7 \| Shaft Length: Custom order \| DN Value: 70,000 \| Type: Ball Screw + Ball Spline Combined (BNS-B)
BNS2020B+C3	THK BNS2020B, φ20 Lead20, C3	THK	Shaft Diameter: φ20mm \| Lead: 20mm \| Ball Screw Ca: 6.1kN / C0a: 12.3kN \| Ball Spline C: 10.5kN / C0: 18.6kN \| Nut OD D: 56mm \| Flange D1: 72mm \| Ball Screw Nut Length L1: 48mm \| Grade: C3 \| Shaft Length: Custom order \| DN Value: 70,000 \| Type: Ball Screw + Ball Spline Combined (BNS-B)
BNS2020B+C5	THK BNS2020B, φ20 Lead20, C5	THK	Shaft Diameter: φ20mm \| Lead: 20mm \| Ball Screw Ca: 6.1kN / C0a: 12.3kN \| Ball Spline C: 10.5kN / C0: 18.6kN \| Nut OD D: 56mm \| Flange D1: 72mm \| Ball Screw Nut Length L1: 48mm \| Grade: C5 \| Shaft Length: Custom order \| DN Value: 70,000 \| Type: Ball Screw + Ball Spline Combined (BNS-B)
BNS2020B+C7	THK BNS2020B, φ20 Lead20, C7	THK	Shaft Diameter: φ20mm \| Lead: 20mm \| Ball Screw Ca: 6.1kN / C0a: 12.3kN \| Ball Spline C: 10.5kN / C0: 18.6kN \| Nut OD D: 56mm \| Flange D1: 72mm \| Ball Screw Nut Length L1: 48mm \| Grade: C7 \| Shaft Length: Custom order \| DN Value: 70,000 \| Type: Ball Screw + Ball Spline Combined (BNS-B)
BNS2525B+C3	THK BNS2525B, φ25 Lead25, C3	THK	Shaft Diameter: φ25mm \| Lead: 25mm \| Ball Screw Ca: 9.1kN / C0a: 19.3kN \| Ball Spline C: 15.9kN / C0: 26.2kN \| Nut OD D: 66mm \| Flange D1: 86mm \| Ball Screw Nut Length L1: 58mm \| Grade: C3 \| Shaft Length: Custom order \| DN Value: 70,000 \| Type: Ball Screw + Ball Spline Combined (BNS-B)
BNS2525B+C5	THK BNS2525B, φ25 Lead25, C5	THK	Shaft Diameter: φ25mm \| Lead: 25mm \| Ball Screw Ca: 9.1kN / C0a: 19.3kN \| Ball Spline C: 15.9kN / C0: 26.2kN \| Nut OD D: 66mm \| Flange D1: 86mm \| Ball Screw Nut Length L1: 58mm \| Grade: C5 \| Shaft Length: Custom order \| DN Value: 70,000 \| Type: Ball Screw + Ball Spline Combined (BNS-B)
BNS2525B+C7	THK BNS2525B, φ25 Lead25, C7	THK	Shaft Diameter: φ25mm \| Lead: 25mm \| Ball Screw Ca: 9.1kN / C0a: 19.3kN \| Ball Spline C: 15.9kN / C0: 26.2kN \| Nut OD D: 66mm \| Flange D1: 86mm \| Ball Screw Nut Length L1: 58mm \| Grade: C7 \| Shaft Length: Custom order \| DN Value: 70,000 \| Type: Ball Screw + Ball Spline Combined (BNS-B)

[THK] — BNT Rolled Ball Screw (Non-preloaded, Square Nut, φ14~45)

THK BNT Series Rolled Ball Screw (Non-preloaded type). Square nut with mounting tapped holes — compact installation without housing. DN value 50,000. Shaft diameter range φ14~45mm. Custom shaft length available. Grade C7. Seal type ZZ.

Brand: THK Category: Ball Screws 30 models

Product Code	Description	Brand	Spec
BNT1404-3.6ZZG0+C7	THK BNT1404-3.6, φ14 Lead4, G0, C7	THK	Shaft Diameter: φ14mm \| Lead: 4mm \| Ca: 5.5kN \| C0a: 11.5kN \| K: 150N/μm \| Ball Circuit: 1×3.65 \| Nut Width W: 34mm \| Shaft Center Height F: 13mm \| Nut Length L1: 35mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT1404-3.6ZZG2+C7	THK BNT1404-3.6, φ14 Lead4, G2, C7	THK	Shaft Diameter: φ14mm \| Lead: 4mm \| Ca: 5.5kN \| C0a: 11.5kN \| K: 150N/μm \| Ball Circuit: 1×3.65 \| Nut Width W: 34mm \| Shaft Center Height F: 13mm \| Nut Length L1: 35mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT1405-2.6ZZG0+C7	THK BNT1405-2.6, φ14 Lead5, G0, C7	THK	Shaft Diameter: φ14mm \| Lead: 5mm \| Ca: 5.0kN \| C0a: 11.4kN \| K: 110N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 34mm \| Shaft Center Height F: 13mm \| Nut Length L1: 35mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT1405-2.6ZZG2+C7	THK BNT1405-2.6, φ14 Lead5, G2, C7	THK	Shaft Diameter: φ14mm \| Lead: 5mm \| Ca: 5.0kN \| C0a: 11.4kN \| K: 110N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 34mm \| Shaft Center Height F: 13mm \| Nut Length L1: 35mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT1605-2.6ZZG0+C7	THK BNT1605-2.6, φ16 Lead5, G0, C7	THK	Shaft Diameter: φ16mm \| Lead: 5mm \| Ca: 5.4kN \| C0a: 13.3kN \| K: 130N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 42mm \| Shaft Center Height F: 16mm \| Nut Length L1: 36mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT1605-2.6ZZG2+C7	THK BNT1605-2.6, φ16 Lead5, G2, C7	THK	Shaft Diameter: φ16mm \| Lead: 5mm \| Ca: 5.4kN \| C0a: 13.3kN \| K: 130N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 42mm \| Shaft Center Height F: 16mm \| Nut Length L1: 36mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT1808-3.6ZZG0+C7	THK BNT1808-3.6, φ18 Lead8, G0, C7	THK	Shaft Diameter: φ18mm \| Lead: 8mm \| Ca: 13.1kN \| C0a: 31.0kN \| K: 210N/μm \| Ball Circuit: 1×3.65 \| Nut Width W: 48mm \| Shaft Center Height F: 17mm \| Nut Length L1: 56mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT1808-3.6ZZG2+C7	THK BNT1808-3.6, φ18 Lead8, G2, C7	THK	Shaft Diameter: φ18mm \| Lead: 8mm \| Ca: 13.1kN \| C0a: 31.0kN \| K: 210N/μm \| Ball Circuit: 1×3.65 \| Nut Width W: 48mm \| Shaft Center Height F: 17mm \| Nut Length L1: 56mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT2005-2.6ZZG0+C7	THK BNT2005-2.6, φ20 Lead5, G0, C7	THK	Shaft Diameter: φ20mm \| Lead: 5mm \| Ca: 6.0kN \| C0a: 16.5kN \| K: 150N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 48mm \| Shaft Center Height F: 17mm \| Nut Length L1: 35mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT2005-2.6ZZG2+C7	THK BNT2005-2.6, φ20 Lead5, G2, C7	THK	Shaft Diameter: φ20mm \| Lead: 5mm \| Ca: 6.0kN \| C0a: 16.5kN \| K: 150N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 48mm \| Shaft Center Height F: 17mm \| Nut Length L1: 35mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT2010-2.6ZZG0+C7	THK BNT2010-2.6, φ20 Lead10, G0, C7	THK	Shaft Diameter: φ20mm \| Lead: 10mm \| Ca: 10.6kN \| C0a: 25.1kN \| K: 160N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 48mm \| Shaft Center Height F: 18mm \| Nut Length L1: 58mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT2010-2.6ZZG2+C7	THK BNT2010-2.6, φ20 Lead10, G2, C7	THK	Shaft Diameter: φ20mm \| Lead: 10mm \| Ca: 10.6kN \| C0a: 25.1kN \| K: 160N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 48mm \| Shaft Center Height F: 18mm \| Nut Length L1: 58mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT2505-2.6ZZG0+C7	THK BNT2505-2.6, φ25 Lead5, G0, C7	THK	Shaft Diameter: φ25mm \| Lead: 5mm \| Ca: 6.7kN \| C0a: 20.8kN \| K: 180N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 60mm \| Shaft Center Height F: 20mm \| Nut Length L1: 35mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT2505-2.6ZZG2+C7	THK BNT2505-2.6, φ25 Lead5, G2, C7	THK	Shaft Diameter: φ25mm \| Lead: 5mm \| Ca: 6.7kN \| C0a: 20.8kN \| K: 180N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 60mm \| Shaft Center Height F: 20mm \| Nut Length L1: 35mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT2510-5.3ZZG0+C7	THK BNT2510-5.3, φ25 Lead10, G0, C7	THK	Shaft Diameter: φ25mm \| Lead: 10mm \| Ca: 31.2kN \| C0a: 83.7kN \| K: 400N/μm \| Ball Circuit: 2×2.65 \| Nut Width W: 60mm \| Shaft Center Height F: 23mm \| Nut Length L1: 94mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT2510-5.3ZZG2+C7	THK BNT2510-5.3, φ25 Lead10, G2, C7	THK	Shaft Diameter: φ25mm \| Lead: 10mm \| Ca: 31.2kN \| C0a: 83.7kN \| K: 400N/μm \| Ball Circuit: 2×2.65 \| Nut Width W: 60mm \| Shaft Center Height F: 23mm \| Nut Length L1: 94mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT2806-2.6ZZG0+C7	THK BNT2806-2.6, φ28 Lead6, G0, C7	THK	Shaft Diameter: φ28mm \| Lead: 6mm \| Ca: 7.0kN \| C0a: 23.4kN \| K: 200N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 60mm \| Shaft Center Height F: 22mm \| Nut Length L1: 42mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT2806-2.6ZZG2+C7	THK BNT2806-2.6, φ28 Lead6, G2, C7	THK	Shaft Diameter: φ28mm \| Lead: 6mm \| Ca: 7.0kN \| C0a: 23.4kN \| K: 200N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 60mm \| Shaft Center Height F: 22mm \| Nut Length L1: 42mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT2806-5.3ZZG0+C7	THK BNT2806-5.3, φ28 Lead6, G0, C7	THK	Shaft Diameter: φ28mm \| Lead: 6mm \| Ca: 12.8kN \| C0a: 46.8kN \| K: 390N/μm \| Ball Circuit: 2×2.65 \| Nut Width W: 60mm \| Shaft Center Height F: 22mm \| Nut Length L1: 67mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT2806-5.3ZZG2+C7	THK BNT2806-5.3, φ28 Lead6, G2, C7	THK	Shaft Diameter: φ28mm \| Lead: 6mm \| Ca: 12.8kN \| C0a: 46.8kN \| K: 390N/μm \| Ball Circuit: 2×2.65 \| Nut Width W: 60mm \| Shaft Center Height F: 22mm \| Nut Length L1: 67mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT3210-2.6ZZG0+C7	THK BNT3210-2.6, φ32 Lead10, G0, C7	THK	Shaft Diameter: φ32mm \| Lead: 10mm \| Ca: 19.8kN \| C0a: 53.8kN \| K: 250N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 70mm \| Shaft Center Height F: 26mm \| Nut Length L1: 64mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT3210-2.6ZZG2+C7	THK BNT3210-2.6, φ32 Lead10, G2, C7	THK	Shaft Diameter: φ32mm \| Lead: 10mm \| Ca: 19.8kN \| C0a: 53.8kN \| K: 250N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 70mm \| Shaft Center Height F: 26mm \| Nut Length L1: 64mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT3210-5.3ZZG0+C7	THK BNT3210-5.3, φ32 Lead10, G0, C7	THK	Shaft Diameter: φ32mm \| Lead: 10mm \| Ca: 36.0kN \| C0a: 107.5kN \| K: 490N/μm \| Ball Circuit: 2×2.65 \| Nut Width W: 70mm \| Shaft Center Height F: 26mm \| Nut Length L1: 94mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT3210-5.3ZZG2+C7	THK BNT3210-5.3, φ32 Lead10, G2, C7	THK	Shaft Diameter: φ32mm \| Lead: 10mm \| Ca: 36.0kN \| C0a: 107.5kN \| K: 490N/μm \| Ball Circuit: 2×2.65 \| Nut Width W: 70mm \| Shaft Center Height F: 26mm \| Nut Length L1: 94mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT3610-2.6ZZG0+C7	THK BNT3610-2.6, φ36 Lead10, G0, C7	THK	Shaft Diameter: φ36mm \| Lead: 10mm \| Ca: 20.8kN \| C0a: 59.3kN \| K: 270N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 86mm \| Shaft Center Height F: 29mm \| Nut Length L1: 64mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT3610-2.6ZZG2+C7	THK BNT3610-2.6, φ36 Lead10, G2, C7	THK	Shaft Diameter: φ36mm \| Lead: 10mm \| Ca: 20.8kN \| C0a: 59.3kN \| K: 270N/μm \| Ball Circuit: 1×2.65 \| Nut Width W: 86mm \| Shaft Center Height F: 29mm \| Nut Length L1: 64mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT3610-5.3ZZG0+C7	THK BNT3610-5.3, φ36 Lead10, G0, C7	THK	Shaft Diameter: φ36mm \| Lead: 10mm \| Ca: 37.8kN \| C0a: 118.7kN \| K: 530N/μm \| Ball Circuit: 2×2.65 \| Nut Width W: 86mm \| Shaft Center Height F: 29mm \| Nut Length L1: 96mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT3610-5.3ZZG2+C7	THK BNT3610-5.3, φ36 Lead10, G2, C7	THK	Shaft Diameter: φ36mm \| Lead: 10mm \| Ca: 37.8kN \| C0a: 118.7kN \| K: 530N/μm \| Ball Circuit: 2×2.65 \| Nut Width W: 86mm \| Shaft Center Height F: 29mm \| Nut Length L1: 96mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT4512-5.3ZZG0+C7	THK BNT4512-5.3, φ45 Lead12, G0, C7	THK	Shaft Diameter: φ45mm \| Lead: 12mm \| Ca: 49.5kN \| C0a: 169.0kN \| K: 650N/μm \| Ball Circuit: 2×2.65 \| Nut Width W: 100mm \| Shaft Center Height F: 36mm \| Nut Length L1: 115mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)
BNT4512-5.3ZZG2+C7	THK BNT4512-5.3, φ45 Lead12, G2, C7	THK	Shaft Diameter: φ45mm \| Lead: 12mm \| Ca: 49.5kN \| C0a: 169.0kN \| K: 650N/μm \| Ball Circuit: 2×2.65 \| Nut Width W: 100mm \| Shaft Center Height F: 36mm \| Nut Length L1: 115mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Shaft Length: Custom order \| DN Value: 50,000 \| Type: Rolled, Non-preloaded, Square Nut (BNT)

[THK] — BS Die Set Ball Cage Inch Ball (BS1955~BS3880)

BS type Die Set Ball Cage — inch steel ball (JIS B 1501). Grooved outer surface to distinguish from KS type. High-rigidity lightweight cage with precision balls (roundness/mutual deviation: 0.0005mm). Balls arranged in helical pattern; non-overlapping ball tracks for long wear-free service life. Shaft diameters: 19~38mm.

Brand: THK Category: Ball Cages 6 models

Product Code	Description	Brand	Spec
BS1955	THK die set ball cage inch, d=19mm, Da=25.35mm, Lm=55mm	THK	Shaft Dia.: d=19mm \| Ball Dia.: dt=3.175mm (inch) \| Cage OD: Da=25.35mm \| Cage Length: Lm=55mm \| Ball Standard: JIS B 1501 \| Ball Arrangement: Helical, non-overlapping tracks \| Note: Grooved outer surface (distinguishes from KS)
BS2260	THK die set ball cage inch, d=22mm, Da=28.35mm, Lm=60mm	THK	Shaft Dia.: d=22mm \| Ball Dia.: dt=3.175mm (inch) \| Cage OD: Da=28.35mm \| Cage Length: Lm=60mm \| Ball Standard: JIS B 1501 \| Ball Arrangement: Helical, non-overlapping tracks \| Note: Grooved outer surface (distinguishes from KS)
BS2565	THK die set ball cage inch, d=25mm, Da=31.35mm, Lm=65mm	THK	Shaft Dia.: d=25mm \| Ball Dia.: dt=3.175mm (inch) \| Cage OD: Da=31.35mm \| Cage Length: Lm=65mm \| Ball Standard: JIS B 1501 \| Ball Arrangement: Helical, non-overlapping tracks \| Note: Grooved outer surface (distinguishes from KS)
BS2870	THK die set ball cage inch, d=28mm, Da=35.938mm, Lm=70mm	THK	Shaft Dia.: d=28mm \| Ball Dia.: dt=3.969mm (inch) \| Cage OD: Da=35.938mm \| Cage Length: Lm=70mm \| Ball Standard: JIS B 1501 \| Ball Arrangement: Helical, non-overlapping tracks \| Note: Grooved outer surface (distinguishes from KS)
BS3275	THK die set ball cage inch, d=32mm, Da=39.938mm, Lm=75mm	THK	Shaft Dia.: d=32mm \| Ball Dia.: dt=3.969mm (inch) \| Cage OD: Da=39.938mm \| Cage Length: Lm=75mm \| Ball Standard: JIS B 1501 \| Ball Arrangement: Helical, non-overlapping tracks \| Note: Grooved outer surface (distinguishes from KS)
BS3880	THK die set ball cage inch, d=38mm, Da=47.525mm, Lm=80mm	THK	Shaft Dia.: d=38mm \| Ball Dia.: dt=4.762mm (inch) \| Cage OD: Da=47.525mm \| Cage Length: Lm=80mm \| Ball Standard: JIS B 1501 \| Ball Arrangement: Helical, non-overlapping tracks \| Note: Grooved outer surface (distinguishes from KS)

[THK] — BTK-V Rolled Ball Screw (Non-preloaded, Compact Circular, φ10~50)

THK BTK-V Series Rolled Ball Screw (Non-preloaded type). Compact circular nut with embedded return pipe — flattened top/bottom flange for low shaft center. DN value 100,000. Shaft diameter range φ10~50mm. Standard shaft lengths available per model. Grade C7. Seal type ZZ.

Brand: THK Category: Ball Screws 38 models

Product Code	Description	Brand	Spec
BTK1006V-2.6ZZG0+C7	THK BTK1006V-2.6, φ10 Lead6, G0, C7	THK	Shaft Diameter: φ10mm \| Lead: 6mm \| Ca: 2.8kN \| C0a: 4.9kN \| K: 88N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 26mm \| Flange D1: 42mm \| Nut Length L1: 36mm \| H: 8mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 200,300,500,1000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK1006V-2.6ZZG2+C7	THK BTK1006V-2.6, φ10 Lead6, G2, C7	THK	Shaft Diameter: φ10mm \| Lead: 6mm \| Ca: 2.8kN \| C0a: 4.9kN \| K: 88N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 26mm \| Flange D1: 42mm \| Nut Length L1: 36mm \| H: 8mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 200,300,500,1000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK1208V-2.6ZZG0+C7	THK BTK1208V-2.6, φ12 Lead8, G0, C7	THK	Shaft Diameter: φ12mm \| Lead: 8mm \| Ca: 3.8kN \| C0a: 6.8kN \| K: 108N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 29mm \| Flange D1: 45mm \| Nut Length L1: 44mm \| H: 8mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 200,300,500,1000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK1208V-2.6ZZG2+C7	THK BTK1208V-2.6, φ12 Lead8, G2, C7	THK	Shaft Diameter: φ12mm \| Lead: 8mm \| Ca: 3.8kN \| C0a: 6.8kN \| K: 108N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 29mm \| Flange D1: 45mm \| Nut Length L1: 44mm \| H: 8mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 200,300,500,1000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK1404V-3.6ZZG0+C7	THK BTK1404V-3.6, φ14 Lead4, G0, C7	THK	Shaft Diameter: φ14mm \| Lead: 4mm \| Ca: 5.5kN \| C0a: 11.5kN \| K: 150N/μm \| Ball Circuit: 1×3.65 \| Nut OD D: 31mm \| Flange D1: 50mm \| Nut Length L1: 40mm \| H: 10mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK1404V-3.6ZZG2+C7	THK BTK1404V-3.6, φ14 Lead4, G2, C7	THK	Shaft Diameter: φ14mm \| Lead: 4mm \| Ca: 5.5kN \| C0a: 11.5kN \| K: 150N/μm \| Ball Circuit: 1×3.65 \| Nut OD D: 31mm \| Flange D1: 50mm \| Nut Length L1: 40mm \| H: 10mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK1405V-2.6ZZG0+C7	THK BTK1405V-2.6, φ14 Lead5, G0, C7	THK	Shaft Diameter: φ14mm \| Lead: 5mm \| Ca: 5.0kN \| C0a: 11.4kN \| K: 116N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 32mm \| Flange D1: 50mm \| Nut Length L1: 40mm \| H: 10mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK1405V-2.6ZZG2+C7	THK BTK1405V-2.6, φ14 Lead5, G2, C7	THK	Shaft Diameter: φ14mm \| Lead: 5mm \| Ca: 5.0kN \| C0a: 11.4kN \| K: 116N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 32mm \| Flange D1: 50mm \| Nut Length L1: 40mm \| H: 10mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK1605V-2.6ZZG0+C7	THK BTK1605V-2.6, φ16 Lead5, G0, C7	THK	Shaft Diameter: φ16mm \| Lead: 5mm \| Ca: 5.4kN \| C0a: 13.3kN \| K: 130N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 34mm \| Flange D1: 54mm \| Nut Length L1: 40mm \| H: 10mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK1605V-2.6ZZG2+C7	THK BTK1605V-2.6, φ16 Lead5, G2, C7	THK	Shaft Diameter: φ16mm \| Lead: 5mm \| Ca: 5.4kN \| C0a: 13.3kN \| K: 130N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 34mm \| Flange D1: 54mm \| Nut Length L1: 40mm \| H: 10mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK1808V-3.6ZZG0+C7	THK BTK1808V-3.6, φ18 Lead8, G0, C7	THK	Shaft Diameter: φ18mm \| Lead: 8mm \| Ca: 13.1kN \| C0a: 31.0kN \| K: 210N/μm \| Ball Circuit: 1×3.65 \| Nut OD D: 50mm \| Flange D1: 80mm \| Nut Length L1: 61mm \| H: 12mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK1808V-3.6ZZG2+C7	THK BTK1808V-3.6, φ18 Lead8, G2, C7	THK	Shaft Diameter: φ18mm \| Lead: 8mm \| Ca: 13.1kN \| C0a: 31.0kN \| K: 210N/μm \| Ball Circuit: 1×3.65 \| Nut OD D: 50mm \| Flange D1: 80mm \| Nut Length L1: 61mm \| H: 12mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK2005V-2.6ZZG0+C7	THK BTK2005V-2.6, φ20 Lead5, G0, C7	THK	Shaft Diameter: φ20mm \| Lead: 5mm \| Ca: 6.0kN \| C0a: 16.5kN \| K: 150N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 40mm \| Flange D1: 60mm \| Nut Length L1: 40mm \| H: 10mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK2005V-2.6ZZG2+C7	THK BTK2005V-2.6, φ20 Lead5, G2, C7	THK	Shaft Diameter: φ20mm \| Lead: 5mm \| Ca: 6.0kN \| C0a: 16.5kN \| K: 150N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 40mm \| Flange D1: 60mm \| Nut Length L1: 40mm \| H: 10mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK2010V-2.6ZZG0+C7	THK BTK2010V-2.6, φ20 Lead10, G0, C7	THK	Shaft Diameter: φ20mm \| Lead: 10mm \| Ca: 10.6kN \| C0a: 25.1kN \| K: 160N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 52mm \| Flange D1: 82mm \| Nut Length L1: 61mm \| H: 12mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK2010V-2.6ZZG2+C7	THK BTK2010V-2.6, φ20 Lead10, G2, C7	THK	Shaft Diameter: φ20mm \| Lead: 10mm \| Ca: 10.6kN \| C0a: 25.1kN \| K: 160N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 52mm \| Flange D1: 82mm \| Nut Length L1: 61mm \| H: 12mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK2505V-2.6ZZG0+C7	THK BTK2505V-2.6, φ25 Lead5, G0, C7	THK	Shaft Diameter: φ25mm \| Lead: 5mm \| Ca: 6.7kN \| C0a: 20.8kN \| K: 180N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 43mm \| Flange D1: 67mm \| Nut Length L1: 40mm \| H: 10mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK2505V-2.6ZZG2+C7	THK BTK2505V-2.6, φ25 Lead5, G2, C7	THK	Shaft Diameter: φ25mm \| Lead: 5mm \| Ca: 6.7kN \| C0a: 20.8kN \| K: 180N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 43mm \| Flange D1: 67mm \| Nut Length L1: 40mm \| H: 10mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK2510V-5.3ZZG0+C7	THK BTK2510V-5.3, φ25 Lead10, G0, C7	THK	Shaft Diameter: φ25mm \| Lead: 10mm \| Ca: 31.2kN \| C0a: 83.7kN \| K: 400N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 60mm \| Flange D1: 96mm \| Nut Length L1: 98mm \| H: 15mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK2510V-5.3ZZG2+C7	THK BTK2510V-5.3, φ25 Lead10, G2, C7	THK	Shaft Diameter: φ25mm \| Lead: 10mm \| Ca: 31.2kN \| C0a: 83.7kN \| K: 400N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 60mm \| Flange D1: 96mm \| Nut Length L1: 98mm \| H: 15mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK2806V-2.6ZZG0+C7	THK BTK2806V-2.6, φ28 Lead6, G0, C7	THK	Shaft Diameter: φ28mm \| Lead: 6mm \| Ca: 7.0kN \| C0a: 23.4kN \| K: 200N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 50mm \| Flange D1: 80mm \| Nut Length L1: 47mm \| H: 12mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,2000,2500mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK2806V-2.6ZZG2+C7	THK BTK2806V-2.6, φ28 Lead6, G2, C7	THK	Shaft Diameter: φ28mm \| Lead: 6mm \| Ca: 7.0kN \| C0a: 23.4kN \| K: 200N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 50mm \| Flange D1: 80mm \| Nut Length L1: 47mm \| H: 12mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,2000,2500mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK2806V-5.3ZZG0+C7	THK BTK2806V-5.3, φ28 Lead6, G0, C7	THK	Shaft Diameter: φ28mm \| Lead: 6mm \| Ca: 12.8kN \| C0a: 46.8kN \| K: 390N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 50mm \| Flange D1: 80mm \| Nut Length L1: 65mm \| H: 12mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,2000,2500mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK2806V-5.3ZZG2+C7	THK BTK2806V-5.3, φ28 Lead6, G2, C7	THK	Shaft Diameter: φ28mm \| Lead: 6mm \| Ca: 12.8kN \| C0a: 46.8kN \| K: 390N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 50mm \| Flange D1: 80mm \| Nut Length L1: 65mm \| H: 12mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,2000,2500mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK3210V-2.6ZZG0+C7	THK BTK3210V-2.6, φ32 Lead10, G0, C7	THK	Shaft Diameter: φ32mm \| Lead: 10mm \| Ca: 19.8kN \| C0a: 53.8kN \| K: 250N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 67mm \| Flange D1: 103mm \| Nut Length L1: 68mm \| H: 15mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000,2500,3000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK3210V-2.6ZZG2+C7	THK BTK3210V-2.6, φ32 Lead10, G2, C7	THK	Shaft Diameter: φ32mm \| Lead: 10mm \| Ca: 19.8kN \| C0a: 53.8kN \| K: 250N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 67mm \| Flange D1: 103mm \| Nut Length L1: 68mm \| H: 15mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000,2500,3000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK3210V-5.3ZZG0+C7	THK BTK3210V-5.3, φ32 Lead10, G0, C7	THK	Shaft Diameter: φ32mm \| Lead: 10mm \| Ca: 36.0kN \| C0a: 107.5kN \| K: 490N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 67mm \| Flange D1: 103mm \| Nut Length L1: 98mm \| H: 15mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000,2500,3000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK3210V-5.3ZZG2+C7	THK BTK3210V-5.3, φ32 Lead10, G2, C7	THK	Shaft Diameter: φ32mm \| Lead: 10mm \| Ca: 36.0kN \| C0a: 107.5kN \| K: 490N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 67mm \| Flange D1: 103mm \| Nut Length L1: 98mm \| H: 15mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000,2500,3000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK3610V-2.6ZZG0+C7	THK BTK3610V-2.6, φ36 Lead10, G0, C7	THK	Shaft Diameter: φ36mm \| Lead: 10mm \| Ca: 20.8kN \| C0a: 59.8kN \| K: 270N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 70mm \| Flange D1: 110mm \| Nut Length L1: 70mm \| H: 17mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,2000,2500,3000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK3610V-2.6ZZG2+C7	THK BTK3610V-2.6, φ36 Lead10, G2, C7	THK	Shaft Diameter: φ36mm \| Lead: 10mm \| Ca: 20.8kN \| C0a: 59.8kN \| K: 270N/μm \| Ball Circuit: 1×2.65 \| Nut OD D: 70mm \| Flange D1: 110mm \| Nut Length L1: 70mm \| H: 17mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,2000,2500,3000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK3610V-5.3ZZG0+C7	THK BTK3610V-5.3, φ36 Lead10, G0, C7	THK	Shaft Diameter: φ36mm \| Lead: 10mm \| Ca: 37.8kN \| C0a: 118.7kN \| K: 530N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 70mm \| Flange D1: 110mm \| Nut Length L1: 100mm \| H: 17mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,2000,2500,3000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK3610V-5.3ZZG2+C7	THK BTK3610V-5.3, φ36 Lead10, G2, C7	THK	Shaft Diameter: φ36mm \| Lead: 10mm \| Ca: 37.8kN \| C0a: 118.7kN \| K: 530N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 70mm \| Flange D1: 110mm \| Nut Length L1: 100mm \| H: 17mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,2000,2500,3000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK4010V-5.3ZZG0+C7	THK BTK4010V-5.3, φ40 Lead10, G0, C7	THK	Shaft Diameter: φ40mm \| Lead: 10mm \| Ca: 40.3kN \| C0a: 134.9kN \| K: 590N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 76mm \| Flange D1: 116mm \| Nut Length L1: 100mm \| H: 17mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 1000,1500,2000,2500,3000,3500mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK4010V-5.3ZZG2+C7	THK BTK4010V-5.3, φ40 Lead10, G2, C7	THK	Shaft Diameter: φ40mm \| Lead: 10mm \| Ca: 40.3kN \| C0a: 134.9kN \| K: 590N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 76mm \| Flange D1: 116mm \| Nut Length L1: 100mm \| H: 17mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 1000,1500,2000,2500,3000,3500mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK4512V-5.3ZZG0+C7	THK BTK4512V-5.3, φ45 Lead12, G0, C7	THK	Shaft Diameter: φ45mm \| Lead: 12mm \| Ca: 49.5kN \| C0a: 169.0kN \| K: 650N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 82mm \| Flange D1: 128mm \| Nut Length L1: 118mm \| H: 20mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 1000,1500,2000,3000,3500,4000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK4512V-5.3ZZG2+C7	THK BTK4512V-5.3, φ45 Lead12, G2, C7	THK	Shaft Diameter: φ45mm \| Lead: 12mm \| Ca: 49.5kN \| C0a: 169.0kN \| K: 650N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 82mm \| Flange D1: 128mm \| Nut Length L1: 118mm \| H: 20mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 1000,1500,2000,3000,3500,4000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK5016V-5.3ZZG0+C7	THK BTK5016V-5.3, φ50 Lead16, G0, C7	THK	Shaft Diameter: φ50mm \| Lead: 16mm \| Ca: 93.8kN \| C0a: 315.2kN \| K: 930N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 102mm \| Flange D1: 162mm \| Nut Length L1: 145mm \| H: 25mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 1000,1500,2000,3000,3500,4000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)
BTK5016V-5.3ZZG2+C7	THK BTK5016V-5.3, φ50 Lead16, G2, C7	THK	Shaft Diameter: φ50mm \| Lead: 16mm \| Ca: 93.8kN \| C0a: 315.2kN \| K: 930N/μm \| Ball Circuit: 2×2.65 \| Nut OD D: 102mm \| Flange D1: 162mm \| Nut Length L1: 145mm \| H: 25mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 1000,1500,2000,3000,3500,4000mm \| DN Value: 100,000 \| Type: Rolled, Non-preloaded, Compact (BTK-V)

[THK] — Cam Follower CF (Economy Type)

THK CF type Cam Follower, economy series. Driver slot on stud head for easy installation. Stainless steel type (M) also available for corrosion resistance. Stud diameter d = 5~10mm, outer diameter D = 13~26mm. Options: V (full needle), M (stainless), UU (seal), R (spherical outer ring). Spherical radius: R250 (CF5) / R500 (CF6~CF10).

Brand: THK Category: Roller Guides 5 models

Product Code	Description	Brand	Spec
CF5	THK Cam Follower CF5 (economy), d=5mm, D=13mm, C(cage)=3.14kN	THK	Stud Diameter (d): 5 mm \| Outer Diameter (D): 13 mm \| Outer Ring Width (C): 9 mm \| Stud Thread: M5×0.8 \| Total Length (B): 23 mm \| Basic Dynamic Load Rating C (cage): 3.14 kN \| Basic Static Load Rating C0 (cage): 2.77 kN \| Basic Dynamic Load Rating C (full needle): 5.1 kN \| Basic Static Load Rating C0 (full needle): 5.5 kN \| Max Allowable Load F0 (cylindrical): 1.42 kN \| Max Allowable Load F0 (spherical): 2.25 kN \| Track Load Capacity (full needle): 0.53 kN \| Limit Speed (cage): 29000 min⁻¹ \| Limit Speed (full needle): 11600 min⁻¹ \| Mass (cage): 10.5 g \| Mass (full needle): 11.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R250
CF6	THK Cam Follower CF6 (economy), d=6mm, D=16mm, C(cage)=3.59kN	THK	Stud Diameter (d): 6 mm \| Outer Diameter (D): 16 mm \| Outer Ring Width (C): 11 mm \| Stud Thread: M6×1 \| Total Length (B): 28 mm \| Basic Dynamic Load Rating C (cage): 3.59 kN \| Basic Static Load Rating C0 (cage): 3.58 kN \| Basic Dynamic Load Rating C (full needle): 6.94 kN \| Basic Static Load Rating C0 (full needle): 8.5 kN \| Max Allowable Load F0 (cylindrical): 2.11 kN \| Max Allowable Load F0 (spherical): 3.43 kN \| Track Load Capacity (full needle): 1.08 kN \| Limit Speed (cage): 25000 min⁻¹ \| Limit Speed (full needle): 11000 min⁻¹ \| Mass (cage): 18.5 g \| Mass (full needle): 19.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500
CF8	THK Cam Follower CF8 (economy), d=8mm, D=19mm, C(cage)=4.17kN	THK	Stud Diameter (d): 8 mm \| Outer Diameter (D): 19 mm \| Outer Ring Width (C): 11 mm \| Stud Thread: M8×1.25 \| Total Length (B): 32 mm \| Basic Dynamic Load Rating C (cage): 4.17 kN \| Basic Static Load Rating C0 (cage): 4.65 kN \| Basic Dynamic Load Rating C (full needle): 8.13 kN \| Basic Static Load Rating C0 (full needle): 11.2 kN \| Max Allowable Load F0 (cylindrical): 4.73 kN \| Max Allowable Load F0 (spherical): 4.02 kN \| Track Load Capacity (full needle): 1.37 kN \| Limit Speed (cage): 20000 min⁻¹ \| Limit Speed (full needle): 8700 min⁻¹ \| Mass (cage): 28.5 g \| Mass (full needle): 29.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500
CF10	THK Cam Follower CF10 (economy), d=10mm, D=22mm, C(cage)=5.33kN	THK	Stud Diameter (d): 10 mm \| Outer Diameter (D): 22 mm \| Outer Ring Width (C): 12 mm \| Stud Thread: M10×1.25 \| Total Length (B): 36 mm \| Basic Dynamic Load Rating C (cage): 5.33 kN \| Basic Static Load Rating C0 (cage): 6.78 kN \| Basic Dynamic Load Rating C (full needle): 9.42 kN \| Basic Static Load Rating C0 (full needle): 14.3 kN \| Max Allowable Load F0 (cylindrical): 5.81 kN \| Max Allowable Load F0 (spherical): 4.7 kN \| Track Load Capacity (full needle): 1.67 kN \| Limit Speed (cage): 17000 min⁻¹ \| Limit Speed (full needle): 7200 min⁻¹ \| Mass (cage): 45.0 g \| Mass (full needle): 46.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500
CF10-1	THK Cam Follower CF10-1 (economy), d=10mm, D=26mm, C(cage)=5.33kN	THK	Stud Diameter (d): 10 mm \| Outer Diameter (D): 26 mm \| Outer Ring Width (C): 12 mm \| Stud Thread: M10×1.25 \| Total Length (B): 36 mm \| Basic Dynamic Load Rating C (cage): 5.33 kN \| Basic Static Load Rating C0 (cage): 6.78 kN \| Basic Dynamic Load Rating C (full needle): 9.42 kN \| Basic Static Load Rating C0 (full needle): 14.3 kN \| Max Allowable Load F0 (cylindrical): 5.81 kN \| Max Allowable Load F0 (spherical): 5.49 kN \| Track Load Capacity (full needle): 2.06 kN \| Limit Speed (cage): 17000 min⁻¹ \| Limit Speed (full needle): 7200 min⁻¹ \| Mass (cage): 60.0 g \| Mass (full needle): 61.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500

[THK] — Cam Follower CF-A (Hex Socket Type)

THK CF-A type Cam Follower with hex socket on stud head for easy installation with hex wrench. No grease nipple; not re-lubricatable. Stud diameter d = 3~10mm, outer diameter D = 10~26mm. Stainless steel type (M): H dimension slightly smaller (see PDF note). Options: V (full needle), M (stainless), UU (seal), R (spherical outer ring). Spherical radius: R250 (CF5-A or smaller) / R500 (CF6-A~CF10-A).

Brand: THK Category: Roller Guides 7 models

Product Code	Description	Brand	Spec
CF3-A	THK Cam Follower CF3-A (hex socket), d=3mm, D=10mm, C(cage)=1.47kN	THK	Stud Diameter (d): 3 mm \| Outer Diameter (D): 10 mm \| Outer Ring Width (C): 7 mm \| Stud Thread: M3×0.5 \| Total Length (B): 17 mm \| Hex Socket Size (H): 2.0 mm (stainless: 1.5 mm) \| Basic Dynamic Load Rating C (cage): 1.47 kN \| Basic Static Load Rating C0 (cage): 1.18 kN \| Basic Dynamic Load Rating C (full needle): 2.8 kN \| Basic Static Load Rating C0 (full needle): 2.5 kN \| Max Allowable Load F0 (cylindrical): 0.36 kN \| Max Allowable Load F0 (spherical): 1.37 kN \| Track Load Capacity (full needle): 0.37 kN \| Limit Speed (cage): 47000 min⁻¹ \| Limit Speed (full needle): 18800 min⁻¹ \| Mass (cage): 4.5 g \| Mass (full needle): 5.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R250 \| Note: No grease nipple; not re-lubricatable
CF4-A	THK Cam Follower CF4-A (hex socket), d=4mm, D=12mm, C(cage)=2.06kN	THK	Stud Diameter (d): 4 mm \| Outer Diameter (D): 12 mm \| Outer Ring Width (C): 8 mm \| Stud Thread: M4×0.7 \| Total Length (B): 20 mm \| Hex Socket Size (H): 2.5 mm (stainless: 2.0 mm) \| Basic Dynamic Load Rating C (cage): 2.06 kN \| Basic Static Load Rating C0 (cage): 2.05 kN \| Basic Dynamic Load Rating C (full needle): 4.0 kN \| Basic Static Load Rating C0 (full needle): 4.3 kN \| Max Allowable Load F0 (cylindrical): 0.78 kN \| Max Allowable Load F0 (spherical): 1.76 kN \| Track Load Capacity (full needle): 0.47 kN \| Limit Speed (cage): 37000 min⁻¹ \| Limit Speed (full needle): 14800 min⁻¹ \| Mass (cage): 7.5 g \| Mass (full needle): 8.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R250 \| Note: No grease nipple; not re-lubricatable
CF5-A	THK Cam Follower CF5-A (hex socket), d=5mm, D=13mm, C(cage)=3.14kN	THK	Stud Diameter (d): 5 mm \| Outer Diameter (D): 13 mm \| Outer Ring Width (C): 9 mm \| Stud Thread: M5×0.8 \| Total Length (B): 23 mm \| Hex Socket Size (H): 3.0 mm (stainless: 2.5 mm) \| Basic Dynamic Load Rating C (cage): 3.14 kN \| Basic Static Load Rating C0 (cage): 2.77 kN \| Basic Dynamic Load Rating C (full needle): 5.1 kN \| Basic Static Load Rating C0 (full needle): 5.5 kN \| Max Allowable Load F0 (cylindrical): 1.42 kN \| Max Allowable Load F0 (spherical): 2.25 kN \| Track Load Capacity (full needle): 0.53 kN \| Limit Speed (cage): 29000 min⁻¹ \| Limit Speed (full needle): 11600 min⁻¹ \| Mass (cage): 10.5 g \| Mass (full needle): 11.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R250 \| Note: No grease nipple; not re-lubricatable
CF6-A	THK Cam Follower CF6-A (hex socket), d=6mm, D=16mm, C(cage)=3.59kN	THK	Stud Diameter (d): 6 mm \| Outer Diameter (D): 16 mm \| Outer Ring Width (C): 11 mm \| Stud Thread: M6×1 \| Total Length (B): 28 mm \| Hex Socket Size (H): 3.0 mm (stainless: 3.0 mm) \| Basic Dynamic Load Rating C (cage): 3.59 kN \| Basic Static Load Rating C0 (cage): 3.58 kN \| Basic Dynamic Load Rating C (full needle): 6.94 kN \| Basic Static Load Rating C0 (full needle): 8.5 kN \| Max Allowable Load F0 (cylindrical): 2.11 kN \| Max Allowable Load F0 (spherical): 3.43 kN \| Track Load Capacity (full needle): 1.08 kN \| Limit Speed (cage): 25000 min⁻¹ \| Limit Speed (full needle): 11000 min⁻¹ \| Mass (cage): 18.5 g \| Mass (full needle): 19.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 \| Note: No grease nipple; not re-lubricatable
CF8-A	THK Cam Follower CF8-A (hex socket), d=8mm, D=19mm, C(cage)=4.17kN	THK	Stud Diameter (d): 8 mm \| Outer Diameter (D): 19 mm \| Outer Ring Width (C): 11 mm \| Stud Thread: M8×1.25 \| Total Length (B): 32 mm \| Hex Socket Size (H): 4.0 mm (stainless: 4.0 mm) \| Basic Dynamic Load Rating C (cage): 4.17 kN \| Basic Static Load Rating C0 (cage): 4.65 kN \| Basic Dynamic Load Rating C (full needle): 8.13 kN \| Basic Static Load Rating C0 (full needle): 11.2 kN \| Max Allowable Load F0 (cylindrical): 4.73 kN \| Max Allowable Load F0 (spherical): 4.02 kN \| Track Load Capacity (full needle): 1.37 kN \| Limit Speed (cage): 20000 min⁻¹ \| Limit Speed (full needle): 8700 min⁻¹ \| Mass (cage): 28.5 g \| Mass (full needle): 29.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 \| Note: No grease nipple; not re-lubricatable
CF10-A	THK Cam Follower CF10-A (hex socket), d=10mm, D=22mm, C(cage)=5.33kN	THK	Stud Diameter (d): 10 mm \| Outer Diameter (D): 22 mm \| Outer Ring Width (C): 12 mm \| Stud Thread: M10×1.25 \| Total Length (B): 36 mm \| Hex Socket Size (H): 5.0 mm (stainless: 5.0 mm) \| Basic Dynamic Load Rating C (cage): 5.33 kN \| Basic Static Load Rating C0 (cage): 6.78 kN \| Basic Dynamic Load Rating C (full needle): 9.42 kN \| Basic Static Load Rating C0 (full needle): 14.3 kN \| Max Allowable Load F0 (cylindrical): 5.81 kN \| Max Allowable Load F0 (spherical): 4.7 kN \| Track Load Capacity (full needle): 1.67 kN \| Limit Speed (cage): 17000 min⁻¹ \| Limit Speed (full needle): 7200 min⁻¹ \| Mass (cage): 45.0 g \| Mass (full needle): 46.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 \| Note: No grease nipple; not re-lubricatable
CF10-1-A	THK Cam Follower CF10-1-A (hex socket), d=10mm, D=26mm, C(cage)=5.33kN	THK	Stud Diameter (d): 10 mm \| Outer Diameter (D): 26 mm \| Outer Ring Width (C): 12 mm \| Stud Thread: M10×1.25 \| Total Length (B): 36 mm \| Hex Socket Size (H): 5.0 mm (stainless: 5.0 mm) \| Basic Dynamic Load Rating C (cage): 5.33 kN \| Basic Static Load Rating C0 (cage): 6.78 kN \| Basic Dynamic Load Rating C (full needle): 9.42 kN \| Basic Static Load Rating C0 (full needle): 14.3 kN \| Max Allowable Load F0 (cylindrical): 5.81 kN \| Max Allowable Load F0 (spherical): 5.49 kN \| Track Load Capacity (full needle): 2.06 kN \| Limit Speed (cage): 17000 min⁻¹ \| Limit Speed (full needle): 7200 min⁻¹ \| Mass (cage): 60.0 g \| Mass (full needle): 61.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 \| Note: No grease nipple; not re-lubricatable

[THK] — Cam Follower CF-AB (Grease Nipple Type)

THK CF-AB type Cam Follower with grease nipple. Hexagonal socket at both stud ends with grease nipple for bidirectional mounting and lubrication. Stud diameter d = 12~30mm, outer diameter D = 30~90mm. Cage or full-complement needle roller options. Options: V (full needle), M (stainless), UU (seal), R (spherical outer ring). Cylindrical track C = 7.87~45.4 kN; spherical track R available (R500 for CF12~18, R1000 for CF20+).

Brand: THK Category: Roller Guides 11 models

Product Code	Description	Brand	Spec
CF12-AB	THK Cam Follower CF12-AB, d=12mm, D=30mm, C(cage)=7.87kN	THK	Stud Diameter (d): 12 mm \| Outer Diameter (D): 30 mm \| Outer Ring Width (C): 14 mm \| Stud Thread: M12×1.5 \| Total Length (B): 40 mm \| Basic Dynamic Load Rating C (cage): 7.87 kN \| Basic Static Load Rating C0 (cage): 9.79 kN \| Basic Dynamic Load Rating C (full needle): 13.4 kN \| Basic Static Load Rating C0 (full needle): 19.8 kN \| Max Allowable Load F0 (cylindrical): 9.37 kN \| Max Allowable Load F0 (spherical): 7.06 kN \| Track Load Capacity (full needle): 2.45 kN \| Limit Speed (cage): 14000 min⁻¹ \| Limit Speed (full needle): 5800 min⁻¹ \| Mass (cage): 105 g \| Mass (full needle): 107 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 (CF12~18) / R1000 (CF20+)
CF12-1-AB	THK Cam Follower CF12-1-AB, d=12mm, D=32mm, C(cage)=7.87kN	THK	Stud Diameter (d): 12 mm \| Outer Diameter (D): 32 mm \| Outer Ring Width (C): 14 mm \| Stud Thread: M12×1.5 \| Total Length (B): 40 mm \| Basic Dynamic Load Rating C (cage): 7.87 kN \| Basic Static Load Rating C0 (cage): 9.79 kN \| Basic Dynamic Load Rating C (full needle): 13.4 kN \| Basic Static Load Rating C0 (full needle): 19.8 kN \| Max Allowable Load F0 (cylindrical): 9.37 kN \| Max Allowable Load F0 (spherical): 7.45 kN \| Track Load Capacity (full needle): 2.74 kN \| Limit Speed (cage): 14000 min⁻¹ \| Limit Speed (full needle): 5800 min⁻¹ \| Mass (cage): 115 g \| Mass (full needle): 117 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 (CF12~18) / R1000 (CF20+)
CF16-AB	THK Cam Follower CF16-AB, d=16mm, D=35mm, C(cage)=12.0kN	THK	Stud Diameter (d): 16 mm \| Outer Diameter (D): 35 mm \| Outer Ring Width (C): 18 mm \| Stud Thread: M16×1.5 \| Total Length (B): 52 mm \| Basic Dynamic Load Rating C (cage): 12.0 kN \| Basic Static Load Rating C0 (cage): 18.3 kN \| Basic Dynamic Load Rating C (full needle): 20.6 kN \| Basic Static Load Rating C0 (full needle): 37.6 kN \| Max Allowable Load F0 (cylindrical): 17.3 kN \| Max Allowable Load F0 (spherical): 11.2 kN \| Track Load Capacity (full needle): 3.14 kN \| Limit Speed (cage): 10000 min⁻¹ \| Limit Speed (full needle): 4500 min⁻¹ \| Mass (cage): 205 g \| Mass (full needle): 207 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 (CF12~18) / R1000 (CF20+)
CF18-AB	THK Cam Follower CF18-AB, d=18mm, D=40mm, C(cage)=14.7kN	THK	Stud Diameter (d): 18 mm \| Outer Diameter (D): 40 mm \| Outer Ring Width (C): 20 mm \| Stud Thread: M18×1.5 \| Total Length (B): 58 mm \| Basic Dynamic Load Rating C (cage): 14.7 kN \| Basic Static Load Rating C0 (cage): 25.2 kN \| Basic Dynamic Load Rating C (full needle): 25.2 kN \| Basic Static Load Rating C0 (full needle): 51.3 kN \| Max Allowable Load F0 (cylindrical): 26.1 kN \| Max Allowable Load F0 (spherical): 14.4 kN \| Track Load Capacity (full needle): 3.72 kN \| Limit Speed (cage): 8500 min⁻¹ \| Limit Speed (full needle): 3800 min⁻¹ \| Mass (cage): 295 g \| Mass (full needle): 300 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 (CF12~18) / R1000 (CF20+)
CF20-AB	THK Cam Follower CF20-AB, d=20mm, D=52mm, C(cage)=20.7kN	THK	Stud Diameter (d): 20 mm \| Outer Diameter (D): 52 mm \| Outer Ring Width (C): 24 mm \| Stud Thread: M20×1.5 \| Total Length (B): 66 mm \| Basic Dynamic Load Rating C (cage): 20.7 kN \| Basic Static Load Rating C0 (cage): 34.8 kN \| Basic Dynamic Load Rating C (full needle): 33.2 kN \| Basic Static Load Rating C0 (full needle): 64.8 kN \| Max Allowable Load F0 (cylindrical): 32.1 kN \| Max Allowable Load F0 (spherical): 23.2 kN \| Track Load Capacity (full needle): 8.23 kN \| Limit Speed (cage): 7000 min⁻¹ \| Limit Speed (full needle): 3400 min⁻¹ \| Mass (cage): 525 g \| Mass (full needle): 530 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 (CF12~18) / R1000 (CF20+)
CF20-1-AB	THK Cam Follower CF20-1-AB, d=20mm, D=47mm, C(cage)=20.7kN	THK	Stud Diameter (d): 20 mm \| Outer Diameter (D): 47 mm \| Outer Ring Width (C): 24 mm \| Stud Thread: M20×1.5 \| Total Length (B): 66 mm \| Basic Dynamic Load Rating C (cage): 20.7 kN \| Basic Static Load Rating C0 (cage): 34.8 kN \| Basic Dynamic Load Rating C (full needle): 33.2 kN \| Basic Static Load Rating C0 (full needle): 64.8 kN \| Max Allowable Load F0 (cylindrical): 32.1 kN \| Max Allowable Load F0 (spherical): 21.0 kN \| Track Load Capacity (full needle): 7.15 kN \| Limit Speed (cage): 7000 min⁻¹ \| Limit Speed (full needle): 3400 min⁻¹ \| Mass (cage): 450 g \| Mass (full needle): 455 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 (CF12~18) / R1000 (CF20+)
CF24-AB	THK Cam Follower CF24-AB, d=24mm, D=62mm, C(cage)=30.6kN	THK	Stud Diameter (d): 24 mm \| Outer Diameter (D): 62 mm \| Outer Ring Width (C): 29 mm \| Stud Thread: M24×1.5 \| Total Length (B): 80 mm \| Basic Dynamic Load Rating C (cage): 30.6 kN \| Basic Static Load Rating C0 (cage): 53.2 kN \| Basic Dynamic Load Rating C (full needle): 46.7 kN \| Basic Static Load Rating C0 (full needle): 92.9 kN \| Max Allowable Load F0 (cylindrical): 49.5 kN \| Max Allowable Load F0 (spherical): 34.2 kN \| Track Load Capacity (full needle): 10.5 kN \| Limit Speed (cage): 6500 min⁻¹ \| Limit Speed (full needle): 2900 min⁻¹ \| Mass (cage): 915 g \| Mass (full needle): 925 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 (CF12~18) / R1000 (CF20+)
CF24-1-AB	THK Cam Follower CF24-1-AB, d=24mm, D=72mm, C(cage)=30.6kN	THK	Stud Diameter (d): 24 mm \| Outer Diameter (D): 72 mm \| Outer Ring Width (C): 29 mm \| Stud Thread: M24×1.5 \| Total Length (B): 80 mm \| Basic Dynamic Load Rating C (cage): 30.6 kN \| Basic Static Load Rating C0 (cage): 53.2 kN \| Basic Dynamic Load Rating C (full needle): 46.7 kN \| Basic Static Load Rating C0 (full needle): 92.9 kN \| Max Allowable Load F0 (cylindrical): 49.5 kN \| Max Allowable Load F0 (spherical): 39.8 kN \| Track Load Capacity (full needle): 12.9 kN \| Limit Speed (cage): 6500 min⁻¹ \| Limit Speed (full needle): 2900 min⁻¹ \| Mass (cage): 1150 g \| Mass (full needle): 1160 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 (CF12~18) / R1000 (CF20+)
CF30-AB	THK Cam Follower CF30-AB, d=30mm, D=80mm, C(cage)=45.4kN	THK	Stud Diameter (d): 30 mm \| Outer Diameter (D): 80 mm \| Outer Ring Width (C): 35 mm \| Stud Thread: M30×1.5 \| Total Length (B): 100 mm \| Basic Dynamic Load Rating C (cage): 45.4 kN \| Basic Static Load Rating C0 (cage): 87.6 kN \| Basic Dynamic Load Rating C (full needle): 67.6 kN \| Basic Static Load Rating C0 (full needle): 145 kN \| Max Allowable Load F0 (cylindrical): 73.7 kN \| Max Allowable Load F0 (spherical): 52.6 kN \| Track Load Capacity (full needle): 14.9 kN \| Limit Speed (cage): 5000 min⁻¹ \| Limit Speed (full needle): 2300 min⁻¹ \| Mass (cage): 1880 g \| Mass (full needle): 1890 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 (CF12~18) / R1000 (CF20+)
CF30-1-AB	THK Cam Follower CF30-1-AB, d=30mm, D=85mm, C(cage)=45.4kN	THK	Stud Diameter (d): 30 mm \| Outer Diameter (D): 85 mm \| Outer Ring Width (C): 35 mm \| Stud Thread: M30×1.5 \| Total Length (B): 100 mm \| Basic Dynamic Load Rating C (cage): 45.4 kN \| Basic Static Load Rating C0 (cage): 87.6 kN \| Basic Dynamic Load Rating C (full needle): 67.6 kN \| Basic Static Load Rating C0 (full needle): 145 kN \| Max Allowable Load F0 (cylindrical): 73.7 kN \| Max Allowable Load F0 (spherical): 56.0 kN \| Track Load Capacity (full needle): 16.1 kN \| Limit Speed (cage): 5000 min⁻¹ \| Limit Speed (full needle): 2300 min⁻¹ \| Mass (cage): 1950 g \| Mass (full needle): 1960 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 (CF12~18) / R1000 (CF20+)
CF30-2-AB	THK Cam Follower CF30-2-AB, d=30mm, D=90mm, C(cage)=45.4kN	THK	Stud Diameter (d): 30 mm \| Outer Diameter (D): 90 mm \| Outer Ring Width (C): 35 mm \| Stud Thread: M30×1.5 \| Total Length (B): 100 mm \| Basic Dynamic Load Rating C (cage): 45.4 kN \| Basic Static Load Rating C0 (cage): 87.6 kN \| Basic Dynamic Load Rating C (full needle): 67.6 kN \| Basic Static Load Rating C0 (full needle): 145 kN \| Max Allowable Load F0 (cylindrical): 73.7 kN \| Max Allowable Load F0 (spherical): 59.3 kN \| Track Load Capacity (full needle): 17.3 kN \| Limit Speed (cage): 5000 min⁻¹ \| Limit Speed (full needle): 2300 min⁻¹ \| Mass (cage): 2000 g \| Mass (full needle): 2010 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500 (CF12~18) / R1000 (CF20+)

[THK] — Cam Follower CF-SFU (Simple Mount, Snap-Fit Type)

THK CF-SFU type Cam Follower for simplified installation. Stepped stud design allows fixing into H7 mounting hole without thread engagement. Ideal for applications with limited stud fastening space. UU double seal standard (no UU code needed in part number). Delivered with plug installed. Stud diameter d = 6~20mm. Options: V (total needle - N/A for this type; cage only), R (spherical outer ring).

Brand: THK Category: Roller Guides 10 models

Product Code	Description	Brand	Spec
CF-SFU-6	THK Cam Follower CF-SFU-6 (simple mount), d=6mm, D=16mm, C=3.59kN	THK	Stud Diameter (d): 6 mm \| Outer Diameter (D): 16 mm \| Outer Ring Width (C): 11 mm \| Total Length (B): 32 mm \| Eccentricity (e): 0.3 mm \| Mounting Hole (H7): Ø6 mm \| Shoulder (t): 20 mm \| Shoulder (f): 11 mm \| Seal: UU double seal (standard, included) \| Basic Dynamic Load Rating C: 3.59 kN \| Basic Static Load Rating C0: 3.58 kN \| Max Allowable Load F0 (cylindrical): 2.11 kN \| Max Allowable Load F0 (spherical): 3.43 kN \| Track Load Capacity: 1.08 kN \| Limit Speed: 17500 min⁻¹ \| Mass: 19.0 g \| Options: R=spherical outer ring \| Spherical radius: R500 \| Note: Plug installed on delivery; cage roller only
CF-SFU-8	THK Cam Follower CF-SFU-8 (simple mount), d=8mm, D=19mm, C=4.17kN	THK	Stud Diameter (d): 8 mm \| Outer Diameter (D): 19 mm \| Outer Ring Width (C): 11 mm \| Total Length (B): 32 mm \| Eccentricity (e): 0.5 mm \| Mounting Hole (H7): Ø8 mm \| Shoulder (t): 20 mm \| Shoulder (f): 13 mm \| Seal: UU double seal (standard, included) \| Basic Dynamic Load Rating C: 4.17 kN \| Basic Static Load Rating C0: 4.65 kN \| Max Allowable Load F0 (cylindrical): 4.73 kN \| Max Allowable Load F0 (spherical): 4.02 kN \| Track Load Capacity: 1.37 kN \| Limit Speed: 14000 min⁻¹ \| Mass: 28.5 g \| Options: R=spherical outer ring \| Spherical radius: R500 \| Note: Plug installed on delivery; cage roller only
CF-SFU-10	THK Cam Follower CF-SFU-10 (simple mount), d=10mm, D=22mm, C=5.33kN	THK	Stud Diameter (d): 10 mm \| Outer Diameter (D): 22 mm \| Outer Ring Width (C): 12 mm \| Total Length (B): 33 mm \| Eccentricity (e): 0.5 mm \| Mounting Hole (H7): Ø10 mm \| Shoulder (t): 20 mm \| Shoulder (f): 15 mm \| Seal: UU double seal (standard, included) \| Basic Dynamic Load Rating C: 5.33 kN \| Basic Static Load Rating C0: 6.78 kN \| Max Allowable Load F0 (cylindrical): 5.81 kN \| Max Allowable Load F0 (spherical): 4.7 kN \| Track Load Capacity: 1.67 kN \| Limit Speed: 11900 min⁻¹ \| Mass: 43.0 g \| Options: R=spherical outer ring \| Spherical radius: R500 \| Note: Plug installed on delivery; cage roller only
CF-SFU-10-1	THK Cam Follower CF-SFU-10-1 (simple mount), d=10mm, D=26mm, C=5.33kN	THK	Stud Diameter (d): 10 mm \| Outer Diameter (D): 26 mm \| Outer Ring Width (C): 12 mm \| Total Length (B): 33 mm \| Eccentricity (e): 0.5 mm \| Mounting Hole (H7): Ø10 mm \| Shoulder (t): 20 mm \| Shoulder (f): 15 mm \| Seal: UU double seal (standard, included) \| Basic Dynamic Load Rating C: 5.33 kN \| Basic Static Load Rating C0: 6.78 kN \| Max Allowable Load F0 (cylindrical): 5.81 kN \| Max Allowable Load F0 (spherical): 5.49 kN \| Track Load Capacity: 2.06 kN \| Limit Speed: 11900 min⁻¹ \| Mass: 58.5 g \| Options: R=spherical outer ring \| Spherical radius: R500 \| Note: Plug installed on delivery; cage roller only
CF-SFU-12	THK Cam Follower CF-SFU-12 (simple mount), d=12mm, D=30mm, C=7.87kN	THK	Stud Diameter (d): 12 mm \| Outer Diameter (D): 30 mm \| Outer Ring Width (C): 14 mm \| Total Length (B): 35 mm \| Eccentricity (e): 1.0 mm \| Mounting Hole (H7): Ø12 mm \| Shoulder (t): 20 mm \| Shoulder (f): 20 mm \| Seal: UU double seal (standard, included) \| Basic Dynamic Load Rating C: 7.87 kN \| Basic Static Load Rating C0: 9.79 kN \| Max Allowable Load F0 (cylindrical): 9.37 kN \| Max Allowable Load F0 (spherical): 7.06 kN \| Track Load Capacity: 2.45 kN \| Limit Speed: 9800 min⁻¹ \| Mass: 93.0 g \| Options: R=spherical outer ring \| Spherical radius: R500 \| Note: Plug installed on delivery; cage roller only
CF-SFU-12-1	THK Cam Follower CF-SFU-12-1 (simple mount), d=12mm, D=32mm, C=7.87kN	THK	Stud Diameter (d): 12 mm \| Outer Diameter (D): 32 mm \| Outer Ring Width (C): 14 mm \| Total Length (B): 35 mm \| Eccentricity (e): 1.0 mm \| Mounting Hole (H7): Ø12 mm \| Shoulder (t): 20 mm \| Shoulder (f): 20 mm \| Seal: UU double seal (standard, included) \| Basic Dynamic Load Rating C: 7.87 kN \| Basic Static Load Rating C0: 9.79 kN \| Max Allowable Load F0 (cylindrical): 9.37 kN \| Max Allowable Load F0 (spherical): 7.45 kN \| Track Load Capacity: 2.74 kN \| Limit Speed: 9800 min⁻¹ \| Mass: 103.0 g \| Options: R=spherical outer ring \| Spherical radius: R500 \| Note: Plug installed on delivery; cage roller only
CF-SFU-16	THK Cam Follower CF-SFU-16 (simple mount), d=16mm, D=35mm, C=12.0kN	THK	Stud Diameter (d): 16 mm \| Outer Diameter (D): 35 mm \| Outer Ring Width (C): 18 mm \| Total Length (B): 44.5 mm \| Eccentricity (e): 1.0 mm \| Mounting Hole (H7): Ø16 mm \| Shoulder (t): 25 mm \| Shoulder (f): 24 mm \| Seal: UU double seal (standard, included) \| Basic Dynamic Load Rating C: 12.0 kN \| Basic Static Load Rating C0: 18.3 kN \| Max Allowable Load F0 (cylindrical): 17.3 kN \| Max Allowable Load F0 (spherical): 11.2 kN \| Track Load Capacity: 3.14 kN \| Limit Speed: 7000 min⁻¹ \| Mass: 163.5 g \| Options: R=spherical outer ring \| Spherical radius: R500 \| Note: Plug installed on delivery; cage roller only
CF-SFU-18	THK Cam Follower CF-SFU-18 (simple mount), d=18mm, D=40mm, C=14.7kN	THK	Stud Diameter (d): 18 mm \| Outer Diameter (D): 40 mm \| Outer Ring Width (C): 20 mm \| Total Length (B): 46.5 mm \| Eccentricity (e): 1.0 mm \| Mounting Hole (H7): Ø18 mm \| Shoulder (t): 25 mm \| Shoulder (f): 26 mm \| Seal: UU double seal (standard, included) \| Basic Dynamic Load Rating C: 14.7 kN \| Basic Static Load Rating C0: 25.2 kN \| Max Allowable Load F0 (cylindrical): 26.1 kN \| Max Allowable Load F0 (spherical): 14.4 kN \| Track Load Capacity: 3.72 kN \| Limit Speed: 5950 min⁻¹ \| Mass: 235.0 g \| Options: R=spherical outer ring \| Spherical radius: R500 \| Note: Plug installed on delivery; cage roller only
CF-SFU-20	THK Cam Follower CF-SFU-20 (simple mount), d=20mm, D=52mm, C=20.7kN	THK	Stud Diameter (d): 20 mm \| Outer Diameter (D): 52 mm \| Outer Ring Width (C): 24 mm \| Total Length (B): 50.5 mm \| Eccentricity (e): 1.0 mm \| Mounting Hole (H7): Ø20 mm \| Shoulder (t): 25 mm \| Shoulder (f): 36 mm \| Seal: UU double seal (standard, included) \| Basic Dynamic Load Rating C: 20.7 kN \| Basic Static Load Rating C0: 34.8 kN \| Max Allowable Load F0 (cylindrical): 32.1 kN \| Max Allowable Load F0 (spherical): 23.2 kN \| Track Load Capacity: 8.23 kN \| Limit Speed: 4900 min⁻¹ \| Mass: 436.0 g \| Options: R=spherical outer ring \| Spherical radius: R1000 \| Note: Plug installed on delivery; cage roller only
CF-SFU-20-1	THK Cam Follower CF-SFU-20-1 (simple mount), d=20mm, D=47mm, C=20.7kN	THK	Stud Diameter (d): 20 mm \| Outer Diameter (D): 47 mm \| Outer Ring Width (C): 24 mm \| Total Length (B): 50.5 mm \| Eccentricity (e): 1.0 mm \| Mounting Hole (H7): Ø20 mm \| Shoulder (t): 25 mm \| Shoulder (f): 36 mm \| Seal: UU double seal (standard, included) \| Basic Dynamic Load Rating C: 20.7 kN \| Basic Static Load Rating C0: 34.8 kN \| Max Allowable Load F0 (cylindrical): 32.1 kN \| Max Allowable Load F0 (spherical): 21.0 kN \| Track Load Capacity: 7.15 kN \| Limit Speed: 4900 min⁻¹ \| Mass: 361.0 g \| Options: R=spherical outer ring \| Spherical radius: R1000 \| Note: Plug installed on delivery; cage roller only

[THK] — Cam Follower CFN-R-A (Thrust Ball Insert, Spherical Type)

THK CFN-R-A type Cam Follower with thrust ball insert inside the standard cam follower body. Supports both radial and axial loads simultaneously. Spherical outer ring (R type) only. Stud diameter d = 5~12mm. CFN5R-A~CFN10R-A: no grease nipple, not re-lubricatable. CFN12R-A: grease nipple provided. Spherical radius: R250 (CFN5R-A) / R500 (CFN6R-A~CFN12R-A).

Brand: THK Category: Roller Guides 5 models

Product Code	Description	Brand	Spec
CFN5R-A	THK Cam Follower CFN5R-A (thrust ball), d=5mm, D=13mm, C=3.14kN, F0_axial=160N	THK	Stud Diameter (d): 5 mm \| Outer Diameter (D): 13 mm \| Outer Ring Width (C): 9 mm \| Outer Ring Type: Spherical only \| Stud Thread: M5×0.8 \| Total Length (B): 23 mm \| Shoulder Dimension (f): 10.0 mm \| Basic Dynamic Load Rating C: 3.14 kN \| Basic Static Load Rating C0: 2.77 kN \| Axial Allowable Load F0: 160 N \| Max Allowable Load (cylindrical track): 1.42 kN \| Track Load Capacity: 0.53 kN \| Limit Speed: 29000 min⁻¹ \| Mass: 10.5 g \| Spherical radius: R250 \| Lubrication: No grease nipple; not re-lubricatable \| Note: Thrust ball insert enables simultaneous radial + axial load
CFN6R-A	THK Cam Follower CFN6R-A (thrust ball), d=6mm, D=16mm, C=3.59kN, F0_axial=250N	THK	Stud Diameter (d): 6 mm \| Outer Diameter (D): 16 mm \| Outer Ring Width (C): 11 mm \| Outer Ring Type: Spherical only \| Stud Thread: M6×1 \| Total Length (B): 28 mm \| Shoulder Dimension (f): 12.0 mm \| Basic Dynamic Load Rating C: 3.59 kN \| Basic Static Load Rating C0: 3.58 kN \| Axial Allowable Load F0: 250 N \| Max Allowable Load (cylindrical track): 2.11 kN \| Track Load Capacity: 1.08 kN \| Limit Speed: 25000 min⁻¹ \| Mass: 18.5 g \| Spherical radius: R500 \| Lubrication: No grease nipple; not re-lubricatable \| Note: Thrust ball insert enables simultaneous radial + axial load
CFN8R-A	THK Cam Follower CFN8R-A (thrust ball), d=8mm, D=19mm, C=4.17kN, F0_axial=290N	THK	Stud Diameter (d): 8 mm \| Outer Diameter (D): 19 mm \| Outer Ring Width (C): 11 mm \| Outer Ring Type: Spherical only \| Stud Thread: M8×1.25 \| Total Length (B): 32 mm \| Shoulder Dimension (f): 14.0 mm \| Basic Dynamic Load Rating C: 4.17 kN \| Basic Static Load Rating C0: 4.65 kN \| Axial Allowable Load F0: 290 N \| Max Allowable Load (cylindrical track): 4.73 kN \| Track Load Capacity: 1.37 kN \| Limit Speed: 20000 min⁻¹ \| Mass: 28.5 g \| Spherical radius: R500 \| Lubrication: No grease nipple; not re-lubricatable \| Note: Thrust ball insert enables simultaneous radial + axial load
CFN10R-A	THK Cam Follower CFN10R-A (thrust ball), d=10mm, D=22mm, C=5.33kN, F0_axial=400N	THK	Stud Diameter (d): 10 mm \| Outer Diameter (D): 22 mm \| Outer Ring Width (C): 12 mm \| Outer Ring Type: Spherical only \| Stud Thread: M10×1.25 \| Total Length (B): 36 mm \| Shoulder Dimension (f): 16.5 mm \| Basic Dynamic Load Rating C: 5.33 kN \| Basic Static Load Rating C0: 6.78 kN \| Axial Allowable Load F0: 400 N \| Max Allowable Load (cylindrical track): 5.81 kN \| Track Load Capacity: 1.67 kN \| Limit Speed: 17000 min⁻¹ \| Mass: 45.0 g \| Spherical radius: R500 \| Lubrication: No grease nipple; not re-lubricatable \| Note: Thrust ball insert enables simultaneous radial + axial load
CFN12R-A	THK Cam Follower CFN12R-A (thrust ball), d=12mm, D=30mm, C=7.87kN, F0_axial=680N	THK	Stud Diameter (d): 12 mm \| Outer Diameter (D): 30 mm \| Outer Ring Width (C): 14 mm \| Outer Ring Type: Spherical only \| Stud Thread: M12×1.5 \| Total Length (B): 40 mm \| Shoulder Dimension (f): 21.5 mm \| Basic Dynamic Load Rating C: 7.87 kN \| Basic Static Load Rating C0: 9.79 kN \| Axial Allowable Load F0: 680 N \| Max Allowable Load (cylindrical track): 9.37 kN \| Track Load Capacity: 2.45 kN \| Limit Speed: 14000 min⁻¹ \| Mass: 105.0 g \| Spherical radius: R500 \| Lubrication: Grease nipple provided; re-lubricatable \| Note: Thrust ball insert enables simultaneous radial + axial load

[THK] — Cam Follower CFT (Lubrication Tap Type)

THK CFT type Cam Follower with lubrication tap hole on stud head and thread. Optimized for centralized piping lubrication systems. CFT6~10-1: M6×0.75 tap on head only. CFT12~12-1: M6×0.75 tap both ends. CFT16 and larger: Rc1/8 (PT1/8) tap both ends. Stud diameter d = 6~30mm. Options: V (full needle), M (stainless), UU (seal), R (spherical outer ring). Spherical radius: R500 (CFT18 or smaller) / R1000 (CFT20 or larger).

Brand: THK Category: Roller Guides 15 models

Product Code	Description	Brand	Spec
CFT6	THK Cam Follower CFT6 (lube tap), d=6mm, D=16mm, C(cage)=3.59kN	THK	Stud Diameter (d): 6 mm \| Outer Diameter (D): 16 mm \| Outer Ring Width (C): 11 mm \| Stud Thread: M6×1 \| Total Length (B): 28 mm \| Lubrication Tap: M6×0.75 (head only) \| Basic Dynamic Load Rating C (cage): 3.59 kN \| Basic Static Load Rating C0 (cage): 3.58 kN \| Basic Dynamic Load Rating C (full needle): 6.94 kN \| Basic Static Load Rating C0 (full needle): 8.5 kN \| Max Allowable Load F0 (cylindrical): 2.11 kN \| Max Allowable Load F0 (spherical): 3.43 kN \| Track Load Capacity (full needle): 1.08 kN \| Limit Speed (cage): 25000 min⁻¹ \| Limit Speed (full needle): 11000 min⁻¹ \| Mass (cage): 18.5 g \| Mass (full needle): 19.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500
CFT8	THK Cam Follower CFT8 (lube tap), d=8mm, D=19mm, C(cage)=4.17kN	THK	Stud Diameter (d): 8 mm \| Outer Diameter (D): 19 mm \| Outer Ring Width (C): 11 mm \| Stud Thread: M8×1.25 \| Total Length (B): 32 mm \| Lubrication Tap: M6×0.75 (head only) \| Basic Dynamic Load Rating C (cage): 4.17 kN \| Basic Static Load Rating C0 (cage): 4.65 kN \| Basic Dynamic Load Rating C (full needle): 8.13 kN \| Basic Static Load Rating C0 (full needle): 11.2 kN \| Max Allowable Load F0 (cylindrical): 4.73 kN \| Max Allowable Load F0 (spherical): 4.02 kN \| Track Load Capacity (full needle): 1.37 kN \| Limit Speed (cage): 20000 min⁻¹ \| Limit Speed (full needle): 8700 min⁻¹ \| Mass (cage): 28.5 g \| Mass (full needle): 29.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500
CFT10	THK Cam Follower CFT10 (lube tap), d=10mm, D=22mm, C(cage)=5.33kN	THK	Stud Diameter (d): 10 mm \| Outer Diameter (D): 22 mm \| Outer Ring Width (C): 12 mm \| Stud Thread: M10×1.25 \| Total Length (B): 36 mm \| Lubrication Tap: M6×0.75 (head only) \| Basic Dynamic Load Rating C (cage): 5.33 kN \| Basic Static Load Rating C0 (cage): 6.78 kN \| Basic Dynamic Load Rating C (full needle): 9.42 kN \| Basic Static Load Rating C0 (full needle): 14.3 kN \| Max Allowable Load F0 (cylindrical): 5.81 kN \| Max Allowable Load F0 (spherical): 4.7 kN \| Track Load Capacity (full needle): 1.67 kN \| Limit Speed (cage): 17000 min⁻¹ \| Limit Speed (full needle): 7200 min⁻¹ \| Mass (cage): 45.0 g \| Mass (full needle): 46.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500
CFT10-1	THK Cam Follower CFT10-1 (lube tap), d=10mm, D=26mm, C(cage)=5.33kN	THK	Stud Diameter (d): 10 mm \| Outer Diameter (D): 26 mm \| Outer Ring Width (C): 12 mm \| Stud Thread: M10×1.25 \| Total Length (B): 36 mm \| Lubrication Tap: M6×0.75 (head only) \| Basic Dynamic Load Rating C (cage): 5.33 kN \| Basic Static Load Rating C0 (cage): 6.78 kN \| Basic Dynamic Load Rating C (full needle): 9.42 kN \| Basic Static Load Rating C0 (full needle): 14.3 kN \| Max Allowable Load F0 (cylindrical): 5.81 kN \| Max Allowable Load F0 (spherical): 5.49 kN \| Track Load Capacity (full needle): 2.06 kN \| Limit Speed (cage): 17000 min⁻¹ \| Limit Speed (full needle): 7200 min⁻¹ \| Mass (cage): 60.0 g \| Mass (full needle): 61.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500
CFT12	THK Cam Follower CFT12 (lube tap), d=12mm, D=30mm, C(cage)=7.87kN	THK	Stud Diameter (d): 12 mm \| Outer Diameter (D): 30 mm \| Outer Ring Width (C): 14 mm \| Stud Thread: M12×1.5 \| Total Length (B): 40 mm \| Lubrication Tap: M6×0.75 (both ends) \| Basic Dynamic Load Rating C (cage): 7.87 kN \| Basic Static Load Rating C0 (cage): 9.79 kN \| Basic Dynamic Load Rating C (full needle): 13.4 kN \| Basic Static Load Rating C0 (full needle): 19.8 kN \| Max Allowable Load F0 (cylindrical): 9.37 kN \| Max Allowable Load F0 (spherical): 7.06 kN \| Track Load Capacity (full needle): 2.45 kN \| Limit Speed (cage): 14000 min⁻¹ \| Limit Speed (full needle): 5800 min⁻¹ \| Mass (cage): 105.0 g \| Mass (full needle): 107.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500
CFT12-1	THK Cam Follower CFT12-1 (lube tap), d=12mm, D=32mm, C(cage)=7.87kN	THK	Stud Diameter (d): 12 mm \| Outer Diameter (D): 32 mm \| Outer Ring Width (C): 14 mm \| Stud Thread: M12×1.5 \| Total Length (B): 40 mm \| Lubrication Tap: M6×0.75 (both ends) \| Basic Dynamic Load Rating C (cage): 7.87 kN \| Basic Static Load Rating C0 (cage): 9.79 kN \| Basic Dynamic Load Rating C (full needle): 13.4 kN \| Basic Static Load Rating C0 (full needle): 19.8 kN \| Max Allowable Load F0 (cylindrical): 9.37 kN \| Max Allowable Load F0 (spherical): 7.45 kN \| Track Load Capacity (full needle): 2.74 kN \| Limit Speed (cage): 14000 min⁻¹ \| Limit Speed (full needle): 5800 min⁻¹ \| Mass (cage): 115.0 g \| Mass (full needle): 117.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500
CFT16	THK Cam Follower CFT16 (lube tap), d=16mm, D=35mm, C(cage)=12.0kN	THK	Stud Diameter (d): 16 mm \| Outer Diameter (D): 35 mm \| Outer Ring Width (C): 18 mm \| Stud Thread: M16×1.5 \| Total Length (B): 52 mm \| Lubrication Tap: Rc1/8 (PT1/8) (both ends) \| Basic Dynamic Load Rating C (cage): 12.0 kN \| Basic Static Load Rating C0 (cage): 18.3 kN \| Basic Dynamic Load Rating C (full needle): 20.6 kN \| Basic Static Load Rating C0 (full needle): 37.6 kN \| Max Allowable Load F0 (cylindrical): 17.3 kN \| Max Allowable Load F0 (spherical): 11.2 kN \| Track Load Capacity (full needle): 3.14 kN \| Limit Speed (cage): 10000 min⁻¹ \| Limit Speed (full needle): 4500 min⁻¹ \| Mass (cage): 205.0 g \| Mass (full needle): 207.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500
CFT18	THK Cam Follower CFT18 (lube tap), d=18mm, D=40mm, C(cage)=14.7kN	THK	Stud Diameter (d): 18 mm \| Outer Diameter (D): 40 mm \| Outer Ring Width (C): 20 mm \| Stud Thread: M18×1.5 \| Total Length (B): 58 mm \| Lubrication Tap: Rc1/8 (PT1/8) (both ends) \| Basic Dynamic Load Rating C (cage): 14.7 kN \| Basic Static Load Rating C0 (cage): 25.2 kN \| Basic Dynamic Load Rating C (full needle): 25.2 kN \| Basic Static Load Rating C0 (full needle): 51.3 kN \| Max Allowable Load F0 (cylindrical): 26.1 kN \| Max Allowable Load F0 (spherical): 14.4 kN \| Track Load Capacity (full needle): 3.72 kN \| Limit Speed (cage): 8500 min⁻¹ \| Limit Speed (full needle): 3800 min⁻¹ \| Mass (cage): 295.0 g \| Mass (full needle): 300.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R500
CFT20	THK Cam Follower CFT20 (lube tap), d=20mm, D=52mm, C(cage)=20.7kN	THK	Stud Diameter (d): 20 mm \| Outer Diameter (D): 52 mm \| Outer Ring Width (C): 24 mm \| Stud Thread: M20×1.5 \| Total Length (B): 66 mm \| Lubrication Tap: Rc1/8 (PT1/8) (both ends) \| Basic Dynamic Load Rating C (cage): 20.7 kN \| Basic Static Load Rating C0 (cage): 34.8 kN \| Basic Dynamic Load Rating C (full needle): 33.2 kN \| Basic Static Load Rating C0 (full needle): 64.8 kN \| Max Allowable Load F0 (cylindrical): 32.1 kN \| Max Allowable Load F0 (spherical): 23.2 kN \| Track Load Capacity (full needle): 8.23 kN \| Limit Speed (cage): 7000 min⁻¹ \| Limit Speed (full needle): 3400 min⁻¹ \| Mass (cage): 525.0 g \| Mass (full needle): 530.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R1000
CFT20-1	THK Cam Follower CFT20-1 (lube tap), d=20mm, D=47mm, C(cage)=20.7kN	THK	Stud Diameter (d): 20 mm \| Outer Diameter (D): 47 mm \| Outer Ring Width (C): 24 mm \| Stud Thread: M20×1.5 \| Total Length (B): 66 mm \| Lubrication Tap: Rc1/8 (PT1/8) (both ends) \| Basic Dynamic Load Rating C (cage): 20.7 kN \| Basic Static Load Rating C0 (cage): 34.8 kN \| Basic Dynamic Load Rating C (full needle): 33.2 kN \| Basic Static Load Rating C0 (full needle): 64.8 kN \| Max Allowable Load F0 (cylindrical): 32.1 kN \| Max Allowable Load F0 (spherical): 21.0 kN \| Track Load Capacity (full needle): 7.15 kN \| Limit Speed (cage): 7000 min⁻¹ \| Limit Speed (full needle): 3400 min⁻¹ \| Mass (cage): 450.0 g \| Mass (full needle): 455.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R1000
CFT24	THK Cam Follower CFT24 (lube tap), d=24mm, D=62mm, C(cage)=30.6kN	THK	Stud Diameter (d): 24 mm \| Outer Diameter (D): 62 mm \| Outer Ring Width (C): 29 mm \| Stud Thread: M24×1.5 \| Total Length (B): 80 mm \| Lubrication Tap: Rc1/8 (PT1/8) (both ends) \| Basic Dynamic Load Rating C (cage): 30.6 kN \| Basic Static Load Rating C0 (cage): 53.2 kN \| Basic Dynamic Load Rating C (full needle): 46.7 kN \| Basic Static Load Rating C0 (full needle): 92.9 kN \| Max Allowable Load F0 (cylindrical): 49.5 kN \| Max Allowable Load F0 (spherical): 34.2 kN \| Track Load Capacity (full needle): 10.5 kN \| Limit Speed (cage): 6500 min⁻¹ \| Limit Speed (full needle): 2900 min⁻¹ \| Mass (cage): 915.0 g \| Mass (full needle): 925.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R1000
CFT24-1	THK Cam Follower CFT24-1 (lube tap), d=24mm, D=72mm, C(cage)=30.6kN	THK	Stud Diameter (d): 24 mm \| Outer Diameter (D): 72 mm \| Outer Ring Width (C): 29 mm \| Stud Thread: M24×1.5 \| Total Length (B): 80 mm \| Lubrication Tap: Rc1/8 (PT1/8) (both ends) \| Basic Dynamic Load Rating C (cage): 30.6 kN \| Basic Static Load Rating C0 (cage): 53.2 kN \| Basic Dynamic Load Rating C (full needle): 46.7 kN \| Basic Static Load Rating C0 (full needle): 92.9 kN \| Max Allowable Load F0 (cylindrical): 49.5 kN \| Max Allowable Load F0 (spherical): 39.8 kN \| Track Load Capacity (full needle): 12.9 kN \| Limit Speed (cage): 6500 min⁻¹ \| Limit Speed (full needle): 2900 min⁻¹ \| Mass (cage): 1150.0 g \| Mass (full needle): 1160.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R1000
CFT30	THK Cam Follower CFT30 (lube tap), d=30mm, D=80mm, C(cage)=45.4kN	THK	Stud Diameter (d): 30 mm \| Outer Diameter (D): 80 mm \| Outer Ring Width (C): 35 mm \| Stud Thread: M30×1.5 \| Total Length (B): 100 mm \| Lubrication Tap: Rc1/8 (PT1/8) (both ends) \| Basic Dynamic Load Rating C (cage): 45.4 kN \| Basic Static Load Rating C0 (cage): 87.6 kN \| Basic Dynamic Load Rating C (full needle): 67.6 kN \| Basic Static Load Rating C0 (full needle): 145 kN \| Max Allowable Load F0 (cylindrical): 73.7 kN \| Max Allowable Load F0 (spherical): 52.6 kN \| Track Load Capacity (full needle): 14.9 kN \| Limit Speed (cage): 5000 min⁻¹ \| Limit Speed (full needle): 2300 min⁻¹ \| Mass (cage): 1880.0 g \| Mass (full needle): 1890.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R1000
CFT30-1	THK Cam Follower CFT30-1 (lube tap), d=30mm, D=85mm, C(cage)=45.4kN	THK	Stud Diameter (d): 30 mm \| Outer Diameter (D): 85 mm \| Outer Ring Width (C): 35 mm \| Stud Thread: M30×1.5 \| Total Length (B): 100 mm \| Lubrication Tap: Rc1/8 (PT1/8) (both ends) \| Basic Dynamic Load Rating C (cage): 45.4 kN \| Basic Static Load Rating C0 (cage): 87.6 kN \| Basic Dynamic Load Rating C (full needle): 67.6 kN \| Basic Static Load Rating C0 (full needle): 145 kN \| Max Allowable Load F0 (cylindrical): 73.7 kN \| Max Allowable Load F0 (spherical): 56.0 kN \| Track Load Capacity (full needle): 16.1 kN \| Limit Speed (cage): 5000 min⁻¹ \| Limit Speed (full needle): 2300 min⁻¹ \| Mass (cage): 1950.0 g \| Mass (full needle): 1960.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R1000
CFT30-2	THK Cam Follower CFT30-2 (lube tap), d=30mm, D=90mm, C(cage)=45.4kN	THK	Stud Diameter (d): 30 mm \| Outer Diameter (D): 90 mm \| Outer Ring Width (C): 35 mm \| Stud Thread: M30×1.5 \| Total Length (B): 100 mm \| Lubrication Tap: Rc1/8 (PT1/8) (both ends) \| Basic Dynamic Load Rating C (cage): 45.4 kN \| Basic Static Load Rating C0 (cage): 87.6 kN \| Basic Dynamic Load Rating C (full needle): 67.6 kN \| Basic Static Load Rating C0 (full needle): 145 kN \| Max Allowable Load F0 (cylindrical): 73.7 kN \| Max Allowable Load F0 (spherical): 59.3 kN \| Track Load Capacity (full needle): 17.3 kN \| Limit Speed (cage): 5000 min⁻¹ \| Limit Speed (full needle): 2300 min⁻¹ \| Mass (cage): 2000.0 g \| Mass (full needle): 2010.0 g \| Options: V=full needle, M=stainless, UU=seal, R=spherical outer ring \| Spherical radius: R1000

[THK] — Change Nut DCMA (Flange, 45° Lead Angle)

THK DCMA Change Nut, flange type with 45° lead angle. Difficult to achieve by conventional machining. Improved wear resistance, enhanced mechanical properties, and simplified shaft-end support. 9 sizes DCMA15T~DCMA50. DCMA40/45/50: order basis only (sold as set with CT shaft). Compatible with CT series multi-start screw shafts.

Brand: THK Category: Ball Screws 9 models

Product Code	Description	Brand	Spec
DCMA15T	THK Change Nut DCMA15T, D=22mm, L=15mm, 45° lead	THK	Outer Diameter (D): 22 mm (0/-0.052) \| Nut Length (L): 15 mm \| Flange Diameter (D1): 44 mm \| Flange Height (H): 6 mm \| Bolt Hole Diameter (B): 5.4 mm \| Bolt PCD: 31 mm \| Lead Angle: 45° \| Mounting Type: Flange (3-bolt) \| Compatible Shaft: CT15T \| Availability: Standard stock
DCMA17T	THK Change Nut DCMA17T, D=28mm, L=15mm, 45° lead	THK	Outer Diameter (D): 28 mm (0/-0.052) \| Nut Length (L): 15 mm \| Flange Diameter (D1): 51 mm \| Flange Height (H): 7 mm \| Bolt Hole Diameter (B): 6.6 mm \| Bolt PCD: 38 mm \| Lead Angle: 45° \| Mounting Type: Flange (3-bolt) \| Compatible Shaft: CT17T \| Availability: Standard stock
DCMA20T	THK Change Nut DCMA20T, D=32mm, L=20mm, 45° lead	THK	Outer Diameter (D): 32 mm (0/-0.062) \| Nut Length (L): 20 mm \| Flange Diameter (D1): 56 mm \| Flange Height (H): 7 mm \| Bolt Hole Diameter (B): 6.6 mm \| Bolt PCD: 42 mm \| Lead Angle: 45° \| Mounting Type: Flange (3-bolt) \| Compatible Shaft: CT20T \| Availability: Standard stock
DCMA25T	THK Change Nut DCMA25T, D=36mm, L=25mm, 45° lead	THK	Outer Diameter (D): 36 mm (0/-0.062) \| Nut Length (L): 25 mm \| Flange Diameter (D1): 61 mm \| Flange Height (H): 8 mm \| Bolt Hole Diameter (B): 6.6 mm \| Bolt PCD: 47 mm \| Lead Angle: 45° \| Mounting Type: Flange (3-bolt) \| Compatible Shaft: CT25T \| Availability: Standard stock
DCMA30T	THK Change Nut DCMA30T, D=44mm, L=28mm, 45° lead	THK	Outer Diameter (D): 44 mm (0/-0.062) \| Nut Length (L): 28 mm \| Flange Diameter (D1): 76 mm \| Flange Height (H): 10 mm \| Bolt Hole Diameter (B): 9.0 mm \| Bolt PCD: 58 mm \| Lead Angle: 45° \| Mounting Type: Flange (3-bolt) \| Compatible Shaft: CT30T \| Availability: Standard stock
DCMA35T	THK Change Nut DCMA35T, D=52mm, L=30mm, 45° lead	THK	Outer Diameter (D): 52 mm (0/-0.074) \| Nut Length (L): 30 mm \| Flange Diameter (D1): 84 mm \| Flange Height (H): 10 mm \| Bolt Hole Diameter (B): 9.0 mm \| Bolt PCD: 66 mm \| Lead Angle: 45° \| Mounting Type: Flange (3-bolt) \| Compatible Shaft: CT35T \| Availability: Standard stock
DCMA40	THK Change Nut DCMA40, D=58mm, L=35mm, 45° lead	THK	Outer Diameter (D): 58 mm (0/-0.074) \| Nut Length (L): 35 mm \| Flange Diameter (D1): 98 mm \| Flange Height (H): 12 mm \| Bolt Hole Diameter (B): 11.0 mm \| Bolt PCD: 76 mm \| Lead Angle: 45° \| Mounting Type: Flange (3-bolt) \| Compatible Shaft: CT40 \| Availability: Order basis only; sold as set with CT shaft
DCMA45	THK Change Nut DCMA45, D=64mm, L=37mm, 45° lead	THK	Outer Diameter (D): 64 mm (0/-0.074) \| Nut Length (L): 37 mm \| Flange Diameter (D1): 104 mm \| Flange Height (H): 12 mm \| Bolt Hole Diameter (B): 11.0 mm \| Bolt PCD: 80 mm \| Lead Angle: 45° \| Mounting Type: Flange (3-bolt) \| Compatible Shaft: CT45 \| Availability: Order basis only; sold as set with CT shaft
DCMA50	THK Change Nut DCMA50, D=68mm, L=40mm, 45° lead	THK	Outer Diameter (D): 68 mm (0/-0.074) \| Nut Length (L): 40 mm \| Flange Diameter (D1): 109 mm \| Flange Height (H): 12 mm \| Bolt Hole Diameter (B): 11.0 mm \| Bolt PCD: 85 mm \| Lead Angle: 45° \| Mounting Type: Flange (3-bolt) \| Compatible Shaft: CT50 \| Availability: Order basis only; sold as set with CT shaft

[THK] — Change Nut DCMB (Flange Long, 45° Lead Angle)

THK DCMB Change Nut, long flange type with 45° lead angle. Longer nut length vs DCMA for higher load capacity. DCMB8T/12T: miniature type using oil-impregnated plastic. 11 sizes DCMB8T~DCMB50. DCMB40/45/50: order basis only (sold as set with CT shaft). Compatible with CT series multi-start screw shafts.

Brand: THK Category: Ball Screws 11 models

Product Code	Description	Brand	Spec
DCMB8T	THK Change Nut DCMB8T, D=15mm, L=16mm, 45° lead	THK	Outer Diameter (D): 15 mm (special) \| Nut Length (L): 16 mm \| Flange Diameter (D1): 28 mm \| Flange Height (H): 4 mm \| Bolt Hole Diameter (B): 3.4 mm \| Bolt PCD: 21 mm \| Lead Angle: 45° \| Mounting Type: Flange (4-bolt) \| Compatible Shaft: CT8T \| Availability: Standard stock \| Material: Oil-impregnated plastic (miniature type)
DCMB12T	THK Change Nut DCMB12T, D=20mm, L=25mm, 45° lead	THK	Outer Diameter (D): 20 mm (special) \| Nut Length (L): 25 mm \| Flange Diameter (D1): 36 mm \| Flange Height (H): 5 mm \| Bolt Hole Diameter (B): 4.5 mm \| Bolt PCD: 27 mm \| Lead Angle: 45° \| Mounting Type: Flange (4-bolt) \| Compatible Shaft: CT12T \| Availability: Standard stock \| Material: Oil-impregnated plastic (miniature type)
DCMB15T	THK Change Nut DCMB15T, D=22mm, L=30mm, 45° lead	THK	Outer Diameter (D): 22 mm (0/-0.052) \| Nut Length (L): 30 mm \| Flange Diameter (D1): 44 mm \| Flange Height (H): 6 mm \| Bolt Hole Diameter (B): 5.4 mm \| Bolt PCD: 31 mm \| Lead Angle: 45° \| Mounting Type: Flange (4-bolt) \| Compatible Shaft: CT15T \| Availability: Standard stock
DCMB17T	THK Change Nut DCMB17T, D=28mm, L=35mm, 45° lead	THK	Outer Diameter (D): 28 mm (0/-0.052) \| Nut Length (L): 35 mm \| Flange Diameter (D1): 51 mm \| Flange Height (H): 7 mm \| Bolt Hole Diameter (B): 6.6 mm \| Bolt PCD: 38 mm \| Lead Angle: 45° \| Mounting Type: Flange (4-bolt) \| Compatible Shaft: CT17T \| Availability: Standard stock
DCMB20T	THK Change Nut DCMB20T, D=32mm, L=40mm, 45° lead	THK	Outer Diameter (D): 32 mm (0/-0.062) \| Nut Length (L): 40 mm \| Flange Diameter (D1): 56 mm \| Flange Height (H): 7 mm \| Bolt Hole Diameter (B): 6.6 mm \| Bolt PCD: 42 mm \| Lead Angle: 45° \| Mounting Type: Flange (4-bolt) \| Compatible Shaft: CT20T \| Availability: Standard stock
DCMB25T	THK Change Nut DCMB25T, D=36mm, L=50mm, 45° lead	THK	Outer Diameter (D): 36 mm (0/-0.062) \| Nut Length (L): 50 mm \| Flange Diameter (D1): 61 mm \| Flange Height (H): 8 mm \| Bolt Hole Diameter (B): 6.6 mm \| Bolt PCD: 47 mm \| Lead Angle: 45° \| Mounting Type: Flange (4-bolt) \| Compatible Shaft: CT25T \| Availability: Standard stock
DCMB30T	THK Change Nut DCMB30T, D=44mm, L=56mm, 45° lead	THK	Outer Diameter (D): 44 mm (0/-0.062) \| Nut Length (L): 56 mm \| Flange Diameter (D1): 76 mm \| Flange Height (H): 10 mm \| Bolt Hole Diameter (B): 9.0 mm \| Bolt PCD: 58 mm \| Lead Angle: 45° \| Mounting Type: Flange (4-bolt) \| Compatible Shaft: CT30T \| Availability: Standard stock
DCMB35T	THK Change Nut DCMB35T, D=52mm, L=60mm, 45° lead	THK	Outer Diameter (D): 52 mm (0/-0.074) \| Nut Length (L): 60 mm \| Flange Diameter (D1): 84 mm \| Flange Height (H): 10 mm \| Bolt Hole Diameter (B): 9.0 mm \| Bolt PCD: 66 mm \| Lead Angle: 45° \| Mounting Type: Flange (4-bolt) \| Compatible Shaft: CT35T \| Availability: Standard stock
DCMB40	THK Change Nut DCMB40, D=58mm, L=70mm, 45° lead	THK	Outer Diameter (D): 58 mm (0/-0.074) \| Nut Length (L): 70 mm \| Flange Diameter (D1): 98 mm \| Flange Height (H): 12 mm \| Bolt Hole Diameter (B): 11.0 mm \| Bolt PCD: 76 mm \| Lead Angle: 45° \| Mounting Type: Flange (4-bolt) \| Compatible Shaft: CT40 \| Availability: Order basis only; sold as set with CT shaft
DCMB45	THK Change Nut DCMB45, D=64mm, L=75mm, 45° lead	THK	Outer Diameter (D): 64 mm (0/-0.074) \| Nut Length (L): 75 mm \| Flange Diameter (D1): 104 mm \| Flange Height (H): 12 mm \| Bolt Hole Diameter (B): 11.0 mm \| Bolt PCD: 80 mm \| Lead Angle: 45° \| Mounting Type: Flange (4-bolt) \| Compatible Shaft: CT45 \| Availability: Order basis only; sold as set with CT shaft
DCMB50	THK Change Nut DCMB50, D=68mm, L=80mm, 45° lead	THK	Outer Diameter (D): 68 mm (0/-0.074) \| Nut Length (L): 80 mm \| Flange Diameter (D1): 109 mm \| Flange Height (H): 12 mm \| Bolt Hole Diameter (B): 11.0 mm \| Bolt PCD: 85 mm \| Lead Angle: 45° \| Mounting Type: Flange (4-bolt) \| Compatible Shaft: CT50 \| Availability: Order basis only; sold as set with CT shaft

[THK] — Change Screw Shaft CT (Multi-start, 45° Lead Angle)

THK CT type multi-start screw shaft with 45° lead angle. 11 sizes CT8T~CT50, outer diameter Dk = 9~52mm. Dynamic allowable torque T = 3.24~681 N·m; thrust F = 863~28500 N. CT40/45/50: order basis only. Standard lengths available; specify T (rolled) type when ordering.

Brand: THK Category: Ball Screws 11 models

Product Code	Description	Brand	Spec
CT8T	THK Change Screw Shaft CT8T, Dk=9mm, lead=24mm, T=3.24N·m	THK	Outer Diameter (Dk): 9 mm \| Effective Diameter (D0): 7.6 mm \| Root Diameter (Dr): 6.2 mm \| Lead: 24 mm \| Lead Angle: 45° \| Number of Starts (Z): 6 \| Standard Lengths: 500,1000 mm \| Max Length: 1000 mm \| Dynamic Allowable Torque (T): 3.24 N·m \| Dynamic Allowable Thrust (F): 863 N \| Flange Static Allowable Load (P): 1800 N \| Nut Mass: 5 g \| Shaft Mass: 0.36 kg/m \| Availability: Standard stock
CT12T	THK Change Screw Shaft CT12T, Dk=13.3mm, lead=36mm, T=12.7N·m	THK	Outer Diameter (Dk): 13.3 mm \| Effective Diameter (D0): 11.5 mm \| Root Diameter (Dr): 9.7 mm \| Lead: 36 mm \| Lead Angle: 45° \| Number of Starts (Z): 7 \| Standard Lengths: 500,1000 mm \| Max Length: 1500 mm \| Dynamic Allowable Torque (T): 12.7 N·m \| Dynamic Allowable Thrust (F): 1370 N \| Flange Static Allowable Load (P): 2800 N \| Nut Mass: 10 g \| Shaft Mass: 0.82 kg/m \| Availability: Standard stock
CT15T	THK Change Screw Shaft CT15T, Dk=15.8mm, lead=44.4mm, T=16.7N·m	THK	Outer Diameter (Dk): 15.8 mm \| Effective Diameter (D0): 13.7 mm \| Root Diameter (Dr): 11.6 mm \| Lead: 44.4 mm \| Lead Angle: 45° \| Number of Starts (Z): 8 \| Standard Lengths: 500,1000 mm \| Max Length: 1500 mm \| Dynamic Allowable Torque (T): 16.7 N·m \| Dynamic Allowable Thrust (F): 2300 N \| Flange Static Allowable Load (P): 13800 N \| Nut Mass: 60 g \| Shaft Mass: 1.2 kg/m \| Availability: Standard stock
CT17T	THK Change Screw Shaft CT17T, Dk=17.8mm, lead=50mm, T=20.6N·m	THK	Outer Diameter (Dk): 17.8 mm \| Effective Diameter (D0): 15.7 mm \| Root Diameter (Dr): 13.6 mm \| Lead: 50 mm \| Lead Angle: 45° \| Number of Starts (Z): 9 \| Standard Lengths: 500,1000 mm \| Max Length: 1500 mm \| Dynamic Allowable Torque (T): 20.6 N·m \| Dynamic Allowable Thrust (F): 2600 N \| Flange Static Allowable Load (P): 28100 N \| Nut Mass: 95 g \| Shaft Mass: 1.5 kg/m \| Availability: Standard stock
CT20T	THK Change Screw Shaft CT20T, Dk=21.2mm, lead=60mm, T=40.2N·m	THK	Outer Diameter (Dk): 21.2 mm \| Effective Diameter (D0): 18.7 mm \| Root Diameter (Dr): 16.2 mm \| Lead: 60 mm \| Lead Angle: 45° \| Number of Starts (Z): 9 \| Standard Lengths: 500,1000,1500 mm \| Max Length: 3000 mm \| Dynamic Allowable Torque (T): 40.2 N·m \| Dynamic Allowable Thrust (F): 4170 N \| Flange Static Allowable Load (P): 34600 N \| Nut Mass: 135 g \| Shaft Mass: 2.6 kg/m \| Availability: Standard stock
CT25T	THK Change Screw Shaft CT25T, Dk=25.6mm, lead=73.3mm, T=74.5N·m	THK	Outer Diameter (Dk): 25.6 mm \| Effective Diameter (D0): 23.1 mm \| Root Diameter (Dr): 20.6 mm \| Lead: 73.3 mm \| Lead Angle: 45° \| Number of Starts (Z): 11 \| Standard Lengths: 500,1000,1500 mm \| Max Length: 3000 mm \| Dynamic Allowable Torque (T): 74.5 N·m \| Dynamic Allowable Thrust (F): 6370 N \| Flange Static Allowable Load (P): 38500 N \| Nut Mass: 175 g \| Shaft Mass: 3.3 kg/m \| Availability: Standard stock
CT30T	THK Change Screw Shaft CT30T, Dk=31.9mm, lead=93.3mm, T=130.0N·m	THK	Outer Diameter (Dk): 31.9 mm \| Effective Diameter (D0): 29.4 mm \| Root Diameter (Dr): 26.9 mm \| Lead: 93.3 mm \| Lead Angle: 45° \| Number of Starts (Z): 14 \| Standard Lengths: 500,1000,2000 mm \| Max Length: 4000 mm \| Dynamic Allowable Torque (T): 130.0 N·m \| Dynamic Allowable Thrust (F): 8090 N \| Flange Static Allowable Load (P): 55400 N \| Nut Mass: 290 g \| Shaft Mass: 5.3 kg/m \| Availability: Standard stock
CT35T	THK Change Screw Shaft CT35T, Dk=34.1mm, lead=97.7mm, T=144.0N·m	THK	Outer Diameter (Dk): 34.1 mm \| Effective Diameter (D0): 31.1 mm \| Root Diameter (Dr): 28.1 mm \| Lead: 97.7 mm \| Lead Angle: 45° \| Number of Starts (Z): 11 \| Standard Lengths: 500,1000,2000 mm \| Max Length: 4000 mm \| Dynamic Allowable Torque (T): 144.0 N·m \| Dynamic Allowable Thrust (F): 9260 N \| Flange Static Allowable Load (P): 84500 N \| Nut Mass: 425 g \| Shaft Mass: 5.8 kg/m \| Availability: Standard stock
CT40	THK Change Screw Shaft CT40, Dk=44mm, lead=119.9mm, T=381.0N·m	THK	Outer Diameter (Dk): 44 mm \| Effective Diameter (D0): 38.18 mm \| Root Diameter (Dr): 33.3 mm \| Lead: 119.9 mm \| Lead Angle: 45° \| Number of Starts (Z): 12 \| Standard Lengths: 500,1000,2000 mm \| Max Length: Contact THK \| Dynamic Allowable Torque (T): 381.0 N·m \| Dynamic Allowable Thrust (F): 20000 N \| Flange Static Allowable Load (P): 85200 N \| Nut Mass: 715 g \| Shaft Mass: 9.0 kg/m \| Availability: Order basis only
CT45	THK Change Screw Shaft CT45, Dk=47mm, lead=129.9mm, T=474.0N·m	THK	Outer Diameter (Dk): 47 mm \| Effective Diameter (D0): 41.37 mm \| Root Diameter (Dr): 36.4 mm \| Lead: 129.9 mm \| Lead Angle: 45° \| Number of Starts (Z): 13 \| Standard Lengths: 1000,2000,3000 mm \| Max Length: Contact THK \| Dynamic Allowable Torque (T): 474.0 N·m \| Dynamic Allowable Thrust (F): 22900 N \| Flange Static Allowable Load (P): 115000 N \| Nut Mass: 820 g \| Shaft Mass: 10.6 kg/m \| Availability: Order basis only
CT50	THK Change Screw Shaft CT50, Dk=52mm, lead=149.9mm, T=681.0N·m	THK	Outer Diameter (Dk): 52 mm \| Effective Diameter (D0): 47.73 mm \| Root Diameter (Dr): 42.9 mm \| Lead: 149.9 mm \| Lead Angle: 45° \| Number of Starts (Z): 15 \| Standard Lengths: 1000,2000,3000 mm \| Max Length: Contact THK \| Dynamic Allowable Torque (T): 681.0 N·m \| Dynamic Allowable Thrust (F): 28500 N \| Flange Static Allowable Load (P): 108000 N \| Nut Mass: 925 g \| Shaft Mass: 14.0 kg/m \| Availability: Order basis only

[THK] — CNF Rolled Ball Screw (Non-preloaded, 4-Row Super Lead, Long Life, φ15~30)

THK CNF Series Rolled Ball Screw (Non-preloaded type). 4-row super lead ball groove combined with long nut for extended service life. DN value 70,000. Shaft diameter range φ15~30mm, lead 30~60mm. Standard shaft lengths available per model. Grade C7. Seal type ZZ.

Brand: THK Category: Ball Screws 8 models

Product Code	Description	Brand	Spec
CNF1530-6ZZG0+C7	THK CNF1530-6, φ15 Lead30, G0, C7	THK	Shaft Diameter: φ15mm \| Lead: 30mm \| Ca: 10.1kN \| C0a: 24.7kN \| K: 310N/μm \| Ball Circuit: 4×1.6 \| Nut OD D: 32mm \| Flange D1: 53mm \| Nut Length L1: 63mm \| H: 10mm \| B1: 47mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500mm \| DN Value: 70,000 \| Type: Rolled, Non-preloaded, 4-Row Super Lead (CNF)
CNF1530-6ZZG2+C7	THK CNF1530-6, φ15 Lead30, G2, C7	THK	Shaft Diameter: φ15mm \| Lead: 30mm \| Ca: 10.1kN \| C0a: 24.7kN \| K: 310N/μm \| Ball Circuit: 4×1.6 \| Nut OD D: 32mm \| Flange D1: 53mm \| Nut Length L1: 63mm \| H: 10mm \| B1: 47mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500mm \| DN Value: 70,000 \| Type: Rolled, Non-preloaded, 4-Row Super Lead (CNF)
CNF2040-6ZZG0+C7	THK CNF2040-6, φ20 Lead40, G0, C7	THK	Shaft Diameter: φ20mm \| Lead: 40mm \| Ca: 12.0kN \| C0a: 34.4kN \| K: 400N/μm \| Ball Circuit: 4×1.65 \| Nut OD D: 37mm \| Flange D1: 57mm \| Nut Length L1: 81mm \| H: 10mm \| B1: 65mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000mm \| DN Value: 70,000 \| Type: Rolled, Non-preloaded, 4-Row Super Lead (CNF)
CNF2040-6ZZG2+C7	THK CNF2040-6, φ20 Lead40, G2, C7	THK	Shaft Diameter: φ20mm \| Lead: 40mm \| Ca: 12.0kN \| C0a: 34.4kN \| K: 400N/μm \| Ball Circuit: 4×1.65 \| Nut OD D: 37mm \| Flange D1: 57mm \| Nut Length L1: 81mm \| H: 10mm \| B1: 65mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 500,1000,1500,2000mm \| DN Value: 70,000 \| Type: Rolled, Non-preloaded, 4-Row Super Lead (CNF)
CNF2550-6ZZG0+C7	THK CNF2550-6, φ25 Lead50, G0, C7	THK	Shaft Diameter: φ25mm \| Lead: 50mm \| Ca: 18.9kN \| C0a: 53.9kN \| K: 460N/μm \| Ball Circuit: 4×1.65 \| Nut OD D: 45mm \| Flange D1: 69mm \| Nut Length L1: 102mm \| H: 12mm \| B1: 81.5mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 1000,1500,2000,3000mm \| DN Value: 70,000 \| Type: Rolled, Non-preloaded, 4-Row Super Lead (CNF)
CNF2550-6ZZG2+C7	THK CNF2550-6, φ25 Lead50, G2, C7	THK	Shaft Diameter: φ25mm \| Lead: 50mm \| Ca: 18.9kN \| C0a: 53.9kN \| K: 460N/μm \| Ball Circuit: 4×1.65 \| Nut OD D: 45mm \| Flange D1: 69mm \| Nut Length L1: 102mm \| H: 12mm \| B1: 81.5mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 1000,1500,2000,3000mm \| DN Value: 70,000 \| Type: Rolled, Non-preloaded, 4-Row Super Lead (CNF)
CNF3060-6ZZG0+C7	THK CNF3060-6, φ30 Lead60, G0, C7	THK	Shaft Diameter: φ30mm \| Lead: 60mm \| Ca: 26.2kN \| C0a: 77.7kN \| K: 600N/μm \| Ball Circuit: 4×1.65 \| Nut OD D: 55mm \| Flange D1: 89mm \| Nut Length L1: 122mm \| H: 15mm \| B1: 97mm \| Clearance: G0 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 1000,2000,3000,4000mm \| DN Value: 70,000 \| Type: Rolled, Non-preloaded, 4-Row Super Lead (CNF)
CNF3060-6ZZG2+C7	THK CNF3060-6, φ30 Lead60, G2, C7	THK	Shaft Diameter: φ30mm \| Lead: 60mm \| Ca: 26.2kN \| C0a: 77.7kN \| K: 600N/μm \| Ball Circuit: 4×1.65 \| Nut OD D: 55mm \| Flange D1: 89mm \| Nut Length L1: 122mm \| H: 15mm \| B1: 97mm \| Clearance: G2 \| Grade: C7 \| Seal: ZZ \| Standard Shaft Lengths: 1000,2000,3000,4000mm \| DN Value: 70,000 \| Type: Rolled, Non-preloaded, 4-Row Super Lead (CNF)

[THK] — Compact Cam Follower CFS-A (Ultra-thin Needle, Hex Socket)

THK CFS-A type Compact Cam Follower with ultra-thin needle rollers. Outer ring diameter is extremely small relative to stud diameter, enabling compact design. Hex socket stud head. Cylindrical outer ring and no seal only. Not re-lubricatable (no grease nipple). Stud diameter d = 2.5~6mm, outer diameter D = 5~12mm. Options: V (full needle), M (stainless steel).

Brand: THK Category: Roller Guides 5 models

Product Code	Description	Brand	Spec
CFS2.5-A	THK Compact Cam Follower CFS2.5-A, d=2.5mm, D=5mm, C(cage)=0.41kN	THK	Stud Diameter (d): 2.5 mm \| Outer Diameter (D): 5 mm \| Outer Ring Width (C): 3 mm \| Stud Thread: M2.5×0.45 \| Total Length (B): 9.5 mm \| Hex Socket Size (H): 4.8 mm \| Outer Ring Type: Cylindrical only \| Basic Dynamic Load Rating C (cage): 0.41 kN \| Basic Static Load Rating C0 (cage): 0.335 kN \| Basic Dynamic Load Rating C (full needle): 1.0 kN \| Basic Static Load Rating C0 (full needle): 1.08 kN \| Max Allowable Load F0: 0.26 kN \| Track Load Capacity (cage): 0.3 kN \| Track Load Capacity (full needle): 1.0 kN \| Mass (cage): 1 g \| Mass (full needle): 1 g \| Options: V=full needle, M=stainless \| Note: No seal, no grease nipple; not re-lubricatable
CFS3-A	THK Compact Cam Follower CFS3-A, d=3.0mm, D=6mm, C(cage)=0.63kN	THK	Stud Diameter (d): 3.0 mm \| Outer Diameter (D): 6 mm \| Outer Ring Width (C): 4 mm \| Stud Thread: M3×0.5 \| Total Length (B): 11.5 mm \| Hex Socket Size (H): 5.8 mm \| Outer Ring Type: Cylindrical only \| Basic Dynamic Load Rating C (cage): 0.63 kN \| Basic Static Load Rating C0 (cage): 0.61 kN \| Basic Dynamic Load Rating C (full needle): 1.37 kN \| Basic Static Load Rating C0 (full needle): 1.77 kN \| Max Allowable Load F0: 0.36 kN \| Track Load Capacity (cage): 0.48 kN \| Track Load Capacity (full needle): 2.0 kN \| Mass (cage): 2 g \| Mass (full needle): 2 g \| Options: V=full needle, M=stainless \| Note: No seal, no grease nipple; not re-lubricatable
CFS4-A	THK Compact Cam Follower CFS4-A, d=4.0mm, D=8mm, C(cage)=1.08kN	THK	Stud Diameter (d): 4.0 mm \| Outer Diameter (D): 8 mm \| Outer Ring Width (C): 5 mm \| Stud Thread: M4×0.7 \| Total Length (B): 15.0 mm \| Hex Socket Size (H): 7.7 mm \| Outer Ring Type: Cylindrical only \| Basic Dynamic Load Rating C (cage): 1.08 kN \| Basic Static Load Rating C0 (cage): 1.08 kN \| Basic Dynamic Load Rating C (full needle): 2.35 kN \| Basic Static Load Rating C0 (full needle): 3.04 kN \| Max Allowable Load F0: 0.78 kN \| Track Load Capacity (cage): 0.77 kN \| Track Load Capacity (full needle): 4.0 kN \| Mass (cage): 4 g \| Mass (full needle): 4 g \| Options: V=full needle, M=stainless \| Note: No seal, no grease nipple; not re-lubricatable
CFS5-A	THK Compact Cam Follower CFS5-A, d=5.0mm, D=10mm, C(cage)=1.57kN	THK	Stud Diameter (d): 5.0 mm \| Outer Diameter (D): 10 mm \| Outer Ring Width (C): 6 mm \| Stud Thread: M5×0.8 \| Total Length (B): 18.0 mm \| Hex Socket Size (H): 9.6 mm \| Outer Ring Type: Cylindrical only \| Basic Dynamic Load Rating C (cage): 1.57 kN \| Basic Static Load Rating C0 (cage): 1.86 kN \| Basic Dynamic Load Rating C (full needle): 3.14 kN \| Basic Static Load Rating C0 (full needle): 4.71 kN \| Max Allowable Load F0: 1.42 kN \| Track Load Capacity (cage): 1.18 kN \| Track Load Capacity (full needle): 7.0 kN \| Mass (cage): 7 g \| Mass (full needle): 7 g \| Options: V=full needle, M=stainless \| Note: No seal, no grease nipple; not re-lubricatable
CFS6-A	THK Compact Cam Follower CFS6-A, d=6.0mm, D=12mm, C(cage)=2.06kN	THK	Stud Diameter (d): 6.0 mm \| Outer Diameter (D): 12 mm \| Outer Ring Width (C): 7 mm \| Stud Thread: M6×1.0 \| Total Length (B): 21.5 mm \| Hex Socket Size (H): 11.6 mm \| Outer Ring Type: Cylindrical only \| Basic Dynamic Load Rating C (cage): 2.06 kN \| Basic Static Load Rating C0 (cage): 2.16 kN \| Basic Dynamic Load Rating C (full needle): 4.61 kN \| Basic Static Load Rating C0 (full needle): 6.27 kN \| Max Allowable Load F0: 2.11 kN \| Track Load Capacity (cage): 1.54 kN \| Track Load Capacity (full needle): 13.0 kN \| Mass (cage): 13 g \| Mass (full needle): 13 g \| Options: V=full needle, M=stainless \| Note: No seal, no grease nipple; not re-lubricatable

[THK] — Cross Roller Guide VR12

Cross Roller Guide VR12 type. Rail length 200~1200mm, 7~41 rollers per set. Basic dynamic load rating C_Z = 17.6 kN per roller; static C0Z = 17.2 kN per roller. 4-rail + 2-cage assembly (1 set). Roller diameter 11.906 mm (cross arrangement). Stainless type (VR12M) available on request.

Brand: THK Category: Roller Guides 11 models

Product Code	Description	Brand	Spec
VR12-200x7Z	THK Cross Roller Guide VR12, Rail 200mm, 7 rollers, max stroke 110mm	THK	Rail Length: 200 mm \| Rollers (Z): 7 \| Max Stroke: 110 mm \| Roller Diameter: 11.906 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 17.6 kN (per roller) \| Basic Static Load Rating C0Z: 17.2 kN (per roller) \| Rail Mass: 5.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR12M (order basis)
VR12-300x10Z	THK Cross Roller Guide VR12, Rail 300mm, 10 rollers, max stroke 190mm	THK	Rail Length: 300 mm \| Rollers (Z): 10 \| Max Stroke: 190 mm \| Roller Diameter: 11.906 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 17.6 kN (per roller) \| Basic Static Load Rating C0Z: 17.2 kN (per roller) \| Rail Mass: 5.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR12M (order basis)
VR12-400x14Z	THK Cross Roller Guide VR12, Rail 400mm, 14 rollers, max stroke 230mm	THK	Rail Length: 400 mm \| Rollers (Z): 14 \| Max Stroke: 230 mm \| Roller Diameter: 11.906 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 17.6 kN (per roller) \| Basic Static Load Rating C0Z: 17.2 kN (per roller) \| Rail Mass: 5.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR12M (order basis)
VR12-500x17Z	THK Cross Roller Guide VR12, Rail 500mm, 17 rollers, max stroke 310mm	THK	Rail Length: 500 mm \| Rollers (Z): 17 \| Max Stroke: 310 mm \| Roller Diameter: 11.906 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 17.6 kN (per roller) \| Basic Static Load Rating C0Z: 17.2 kN (per roller) \| Rail Mass: 5.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR12M (order basis)
VR12-600x21Z	THK Cross Roller Guide VR12, Rail 600mm, 21 rollers, max stroke 350mm	THK	Rail Length: 600 mm \| Rollers (Z): 21 \| Max Stroke: 350 mm \| Roller Diameter: 11.906 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 17.6 kN (per roller) \| Basic Static Load Rating C0Z: 17.2 kN (per roller) \| Rail Mass: 5.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR12M (order basis)
VR12-700x24Z	THK Cross Roller Guide VR12, Rail 700mm, 24 rollers, max stroke 430mm	THK	Rail Length: 700 mm \| Rollers (Z): 24 \| Max Stroke: 430 mm \| Roller Diameter: 11.906 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 17.6 kN (per roller) \| Basic Static Load Rating C0Z: 17.2 kN (per roller) \| Rail Mass: 5.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR12M (order basis)
VR12-800x28Z	THK Cross Roller Guide VR12, Rail 800mm, 28 rollers, max stroke 470mm	THK	Rail Length: 800 mm \| Rollers (Z): 28 \| Max Stroke: 470 mm \| Roller Diameter: 11.906 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 17.6 kN (per roller) \| Basic Static Load Rating C0Z: 17.2 kN (per roller) \| Rail Mass: 5.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR12M (order basis)
VR12-900x31Z	THK Cross Roller Guide VR12, Rail 900mm, 31 rollers, max stroke 550mm	THK	Rail Length: 900 mm \| Rollers (Z): 31 \| Max Stroke: 550 mm \| Roller Diameter: 11.906 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 17.6 kN (per roller) \| Basic Static Load Rating C0Z: 17.2 kN (per roller) \| Rail Mass: 5.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR12M (order basis)
VR12-1000x34Z	THK Cross Roller Guide VR12, Rail 1000mm, 34 rollers, max stroke 630mm	THK	Rail Length: 1000 mm \| Rollers (Z): 34 \| Max Stroke: 630 mm \| Roller Diameter: 11.906 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 17.6 kN (per roller) \| Basic Static Load Rating C0Z: 17.2 kN (per roller) \| Rail Mass: 5.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR12M (order basis)
VR12-1100x38Z	THK Cross Roller Guide VR12, Rail 1100mm, 38 rollers, max stroke 670mm	THK	Rail Length: 1100 mm \| Rollers (Z): 38 \| Max Stroke: 670 mm \| Roller Diameter: 11.906 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 17.6 kN (per roller) \| Basic Static Load Rating C0Z: 17.2 kN (per roller) \| Rail Mass: 5.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR12M (order basis)
VR12-1200x41Z	THK Cross Roller Guide VR12, Rail 1200mm, 41 rollers, max stroke 750mm	THK	Rail Length: 1200 mm \| Rollers (Z): 41 \| Max Stroke: 750 mm \| Roller Diameter: 11.906 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 17.6 kN (per roller) \| Basic Static Load Rating C0Z: 17.2 kN (per roller) \| Rail Mass: 5.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR12M (order basis)

[THK] — Cross Roller Guide VR15

Cross Roller Guide VR15 type. Rail length 300~1200mm, 8~33 rollers per set. Basic dynamic load rating C_Z = 27.9 kN per roller; static C0Z = 26.8 kN per roller. 4-rail + 2-cage assembly (1 set). Roller diameter 15.081 mm (cross arrangement). Stainless type (VR15M) available on request.

Brand: THK Category: Roller Guides 10 models

Product Code	Description	Brand	Spec
VR15-300x8Z	THK Cross Roller Guide VR15, Rail 300mm, 8 rollers, max stroke 190mm	THK	Rail Length: 300 mm \| Rollers (Z): 8 \| Max Stroke: 190 mm \| Roller Diameter: 15.081 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 27.9 kN (per roller) \| Basic Static Load Rating C0Z: 26.8 kN (per roller) \| Rail Mass: 8.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR15M (order basis)
VR15-400x11Z	THK Cross Roller Guide VR15, Rail 400mm, 11 rollers, max stroke 240mm	THK	Rail Length: 400 mm \| Rollers (Z): 11 \| Max Stroke: 240 mm \| Roller Diameter: 15.081 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 27.9 kN (per roller) \| Basic Static Load Rating C0Z: 26.8 kN (per roller) \| Rail Mass: 8.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR15M (order basis)
VR15-500x13Z	THK Cross Roller Guide VR15, Rail 500mm, 13 rollers, max stroke 340mm	THK	Rail Length: 500 mm \| Rollers (Z): 13 \| Max Stroke: 340 mm \| Roller Diameter: 15.081 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 27.9 kN (per roller) \| Basic Static Load Rating C0Z: 26.8 kN (per roller) \| Rail Mass: 8.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR15M (order basis)
VR15-600x16Z	THK Cross Roller Guide VR15, Rail 600mm, 16 rollers, max stroke 390mm	THK	Rail Length: 600 mm \| Rollers (Z): 16 \| Max Stroke: 390 mm \| Roller Diameter: 15.081 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 27.9 kN (per roller) \| Basic Static Load Rating C0Z: 26.8 kN (per roller) \| Rail Mass: 8.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR15M (order basis)
VR15-700x19Z	THK Cross Roller Guide VR15, Rail 700mm, 19 rollers, max stroke 440mm	THK	Rail Length: 700 mm \| Rollers (Z): 19 \| Max Stroke: 440 mm \| Roller Diameter: 15.081 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 27.9 kN (per roller) \| Basic Static Load Rating C0Z: 26.8 kN (per roller) \| Rail Mass: 8.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR15M (order basis)
VR15-800x22Z	THK Cross Roller Guide VR15, Rail 800mm, 22 rollers, max stroke 490mm	THK	Rail Length: 800 mm \| Rollers (Z): 22 \| Max Stroke: 490 mm \| Roller Diameter: 15.081 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 27.9 kN (per roller) \| Basic Static Load Rating C0Z: 26.8 kN (per roller) \| Rail Mass: 8.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR15M (order basis)
VR15-900x25Z	THK Cross Roller Guide VR15, Rail 900mm, 25 rollers, max stroke 540mm	THK	Rail Length: 900 mm \| Rollers (Z): 25 \| Max Stroke: 540 mm \| Roller Diameter: 15.081 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 27.9 kN (per roller) \| Basic Static Load Rating C0Z: 26.8 kN (per roller) \| Rail Mass: 8.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR15M (order basis)
VR15-1000x27Z	THK Cross Roller Guide VR15, Rail 1000mm, 27 rollers, max stroke 640mm	THK	Rail Length: 1000 mm \| Rollers (Z): 27 \| Max Stroke: 640 mm \| Roller Diameter: 15.081 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 27.9 kN (per roller) \| Basic Static Load Rating C0Z: 26.8 kN (per roller) \| Rail Mass: 8.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR15M (order basis)
VR15-1100x30Z	THK Cross Roller Guide VR15, Rail 1100mm, 30 rollers, max stroke 690mm	THK	Rail Length: 1100 mm \| Rollers (Z): 30 \| Max Stroke: 690 mm \| Roller Diameter: 15.081 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 27.9 kN (per roller) \| Basic Static Load Rating C0Z: 26.8 kN (per roller) \| Rail Mass: 8.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR15M (order basis)
VR15-1200x33Z	THK Cross Roller Guide VR15, Rail 1200mm, 33 rollers, max stroke 740mm	THK	Rail Length: 1200 mm \| Rollers (Z): 33 \| Max Stroke: 740 mm \| Roller Diameter: 15.081 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 27.9 kN (per roller) \| Basic Static Load Rating C0Z: 26.8 kN (per roller) \| Rail Mass: 8.3 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR15M (order basis)

[THK] — Cross Roller Guide VR18

Cross Roller Guide VR18 type. Rail length 300~1200mm, 6~27 rollers per set. Basic dynamic load rating C_Z = 40.9 kN per roller; static C0Z = 38.8 kN per roller. 4-rail + 2-cage assembly (1 set). Roller diameter 18 mm (cross arrangement). Stainless type (VR18M) available on request.

Brand: THK Category: Roller Guides 10 models

Product Code	Description	Brand	Spec
VR18-300x6Z	THK Cross Roller Guide VR18, Rail 300mm, 6 rollers, max stroke 228mm	THK	Rail Length: 300 mm \| Rollers (Z): 6 \| Max Stroke: 228 mm \| Roller Diameter: 18 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 40.9 kN (per roller) \| Basic Static Load Rating C0Z: 38.8 kN (per roller) \| Rail Mass: 10.5 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR18M (order basis)
VR18-400x9Z	THK Cross Roller Guide VR18, Rail 400mm, 9 rollers, max stroke 248mm	THK	Rail Length: 400 mm \| Rollers (Z): 9 \| Max Stroke: 248 mm \| Roller Diameter: 18 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 40.9 kN (per roller) \| Basic Static Load Rating C0Z: 38.8 kN (per roller) \| Rail Mass: 10.5 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR18M (order basis)
VR18-500x11Z	THK Cross Roller Guide VR18, Rail 500mm, 11 rollers, max stroke 328mm	THK	Rail Length: 500 mm \| Rollers (Z): 11 \| Max Stroke: 328 mm \| Roller Diameter: 18 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 40.9 kN (per roller) \| Basic Static Load Rating C0Z: 38.8 kN (per roller) \| Rail Mass: 10.5 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR18M (order basis)
VR18-600x13Z	THK Cross Roller Guide VR18, Rail 600mm, 13 rollers, max stroke 408mm	THK	Rail Length: 600 mm \| Rollers (Z): 13 \| Max Stroke: 408 mm \| Roller Diameter: 18 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 40.9 kN (per roller) \| Basic Static Load Rating C0Z: 38.8 kN (per roller) \| Rail Mass: 10.5 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR18M (order basis)
VR18-700x16Z	THK Cross Roller Guide VR18, Rail 700mm, 16 rollers, max stroke 428mm	THK	Rail Length: 700 mm \| Rollers (Z): 16 \| Max Stroke: 428 mm \| Roller Diameter: 18 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 40.9 kN (per roller) \| Basic Static Load Rating C0Z: 38.8 kN (per roller) \| Rail Mass: 10.5 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR18M (order basis)
VR18-800x18Z	THK Cross Roller Guide VR18, Rail 800mm, 18 rollers, max stroke 508mm	THK	Rail Length: 800 mm \| Rollers (Z): 18 \| Max Stroke: 508 mm \| Roller Diameter: 18 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 40.9 kN (per roller) \| Basic Static Load Rating C0Z: 38.8 kN (per roller) \| Rail Mass: 10.5 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR18M (order basis)
VR18-900x20Z	THK Cross Roller Guide VR18, Rail 900mm, 20 rollers, max stroke 588mm	THK	Rail Length: 900 mm \| Rollers (Z): 20 \| Max Stroke: 588 mm \| Roller Diameter: 18 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 40.9 kN (per roller) \| Basic Static Load Rating C0Z: 38.8 kN (per roller) \| Rail Mass: 10.5 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR18M (order basis)
VR18-1000x23Z	THK Cross Roller Guide VR18, Rail 1000mm, 23 rollers, max stroke 608mm	THK	Rail Length: 1000 mm \| Rollers (Z): 23 \| Max Stroke: 608 mm \| Roller Diameter: 18 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 40.9 kN (per roller) \| Basic Static Load Rating C0Z: 38.8 kN (per roller) \| Rail Mass: 10.5 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR18M (order basis)
VR18-1100x25Z	THK Cross Roller Guide VR18, Rail 1100mm, 25 rollers, max stroke 688mm	THK	Rail Length: 1100 mm \| Rollers (Z): 25 \| Max Stroke: 688 mm \| Roller Diameter: 18 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 40.9 kN (per roller) \| Basic Static Load Rating C0Z: 38.8 kN (per roller) \| Rail Mass: 10.5 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR18M (order basis)
VR18-1200x27Z	THK Cross Roller Guide VR18, Rail 1200mm, 27 rollers, max stroke 768mm	THK	Rail Length: 1200 mm \| Rollers (Z): 27 \| Max Stroke: 768 mm \| Roller Diameter: 18 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 40.9 kN (per roller) \| Basic Static Load Rating C0Z: 38.8 kN (per roller) \| Rail Mass: 10.5 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR18M (order basis)

[THK] — Cross Roller Guide VR9

Cross Roller Guide VR9 type. Rail length 200~1200mm, 10~60 rollers per set. Basic dynamic load rating C_Z = 9.53 kN per roller; static C0Z = 9.48 kN per roller. 4-rail + 2-cage assembly (1 set). Roller diameter 9.525 mm (cross arrangement). Stainless type (VR9M) available on request.

Brand: THK Category: Roller Guides 11 models

Product Code	Description	Brand	Spec
VR9-200x10Z	THK Cross Roller Guide VR9, Rail 200mm, 10 rollers, max stroke 118mm	THK	Rail Length: 200 mm \| Rollers (Z): 10 \| Max Stroke: 118 mm \| Roller Diameter: 9.525 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 9.53 kN (per roller) \| Basic Static Load Rating C0Z: 9.48 kN (per roller) \| Rail Mass: 3.2 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR9M (order basis)
VR9-300x15Z	THK Cross Roller Guide VR9, Rail 300mm, 15 rollers, max stroke 178mm	THK	Rail Length: 300 mm \| Rollers (Z): 15 \| Max Stroke: 178 mm \| Roller Diameter: 9.525 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 9.53 kN (per roller) \| Basic Static Load Rating C0Z: 9.48 kN (per roller) \| Rail Mass: 3.2 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR9M (order basis)
VR9-400x20Z	THK Cross Roller Guide VR9, Rail 400mm, 20 rollers, max stroke 238mm	THK	Rail Length: 400 mm \| Rollers (Z): 20 \| Max Stroke: 238 mm \| Roller Diameter: 9.525 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 9.53 kN (per roller) \| Basic Static Load Rating C0Z: 9.48 kN (per roller) \| Rail Mass: 3.2 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR9M (order basis)
VR9-500x25Z	THK Cross Roller Guide VR9, Rail 500mm, 25 rollers, max stroke 298mm	THK	Rail Length: 500 mm \| Rollers (Z): 25 \| Max Stroke: 298 mm \| Roller Diameter: 9.525 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 9.53 kN (per roller) \| Basic Static Load Rating C0Z: 9.48 kN (per roller) \| Rail Mass: 3.2 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR9M (order basis)
VR9-600x30Z	THK Cross Roller Guide VR9, Rail 600mm, 30 rollers, max stroke 358mm	THK	Rail Length: 600 mm \| Rollers (Z): 30 \| Max Stroke: 358 mm \| Roller Diameter: 9.525 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 9.53 kN (per roller) \| Basic Static Load Rating C0Z: 9.48 kN (per roller) \| Rail Mass: 3.2 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR9M (order basis)
VR9-700x35Z	THK Cross Roller Guide VR9, Rail 700mm, 35 rollers, max stroke 418mm	THK	Rail Length: 700 mm \| Rollers (Z): 35 \| Max Stroke: 418 mm \| Roller Diameter: 9.525 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 9.53 kN (per roller) \| Basic Static Load Rating C0Z: 9.48 kN (per roller) \| Rail Mass: 3.2 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR9M (order basis)
VR9-800x40Z	THK Cross Roller Guide VR9, Rail 800mm, 40 rollers, max stroke 478mm	THK	Rail Length: 800 mm \| Rollers (Z): 40 \| Max Stroke: 478 mm \| Roller Diameter: 9.525 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 9.53 kN (per roller) \| Basic Static Load Rating C0Z: 9.48 kN (per roller) \| Rail Mass: 3.2 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR9M (order basis)
VR9-900x45Z	THK Cross Roller Guide VR9, Rail 900mm, 45 rollers, max stroke 538mm	THK	Rail Length: 900 mm \| Rollers (Z): 45 \| Max Stroke: 538 mm \| Roller Diameter: 9.525 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 9.53 kN (per roller) \| Basic Static Load Rating C0Z: 9.48 kN (per roller) \| Rail Mass: 3.2 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR9M (order basis)
VR9-1000x50Z	THK Cross Roller Guide VR9, Rail 1000mm, 50 rollers, max stroke 598mm	THK	Rail Length: 1000 mm \| Rollers (Z): 50 \| Max Stroke: 598 mm \| Roller Diameter: 9.525 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 9.53 kN (per roller) \| Basic Static Load Rating C0Z: 9.48 kN (per roller) \| Rail Mass: 3.2 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR9M (order basis)
VR9-1100x55Z	THK Cross Roller Guide VR9, Rail 1100mm, 55 rollers, max stroke 658mm	THK	Rail Length: 1100 mm \| Rollers (Z): 55 \| Max Stroke: 658 mm \| Roller Diameter: 9.525 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 9.53 kN (per roller) \| Basic Static Load Rating C0Z: 9.48 kN (per roller) \| Rail Mass: 3.2 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR9M (order basis)
VR9-1200x60Z	THK Cross Roller Guide VR9, Rail 1200mm, 60 rollers, max stroke 718mm	THK	Rail Length: 1200 mm \| Rollers (Z): 60 \| Max Stroke: 718 mm \| Roller Diameter: 9.525 mm (cross roller) \| Basic Dynamic Load Rating C_Z: 9.53 kN (per roller) \| Basic Static Load Rating C0Z: 9.48 kN (per roller) \| Rail Mass: 3.2 kg/m (rail) \| Assembly: 4 rails + 2 cages (1 set) \| Stainless Type: VR9M (order basis)

[THK] — Cross Roller Table VRT1 (W20×H8, M2.6)

THK VRT Miniature Cross Roller Table, VRT1 frame. Table width W=20mm, height M=8mm, mounting tap M2.6. Stroke range 12~50mm. Cross roller construction for high rigidity and precision linear motion. Full stainless steel type available on request.

Brand: THK Category: Roller Guides 7 models

Product Code	Description	Brand	Spec
VRT1025	THK Cross Roller Table VRT1025, stroke 12mm, 5 rollers, 23g	THK	Frame: VRT1 \| Table Width (W): 20 mm \| Height (M): 8 mm \| Stroke: 12 mm \| Rollers (Z): 5 \| Mass: 23 g \| Basic Dynamic Load Rating C: 0.46 kN \| Basic Static Load Rating C0: 0.61 kN \| Static Allowable Moment MA: 1.52 N·m \| Static Allowable Moment MB: 1.25 N·m \| Static Allowable Moment MC: 2.29 N·m \| Mounting Tap: M2.6 \| Full Stainless Type: available on request
VRT1035	THK Cross Roller Table VRT1035, stroke 18mm, 7 rollers, 32g	THK	Frame: VRT1 \| Table Width (W): 20 mm \| Height (M): 8 mm \| Stroke: 18 mm \| Rollers (Z): 7 \| Mass: 32 g \| Basic Dynamic Load Rating C: 0.63 kN \| Basic Static Load Rating C0: 0.92 kN \| Static Allowable Moment MA: 2.62 N·m \| Static Allowable Moment MB: 2.32 N·m \| Static Allowable Moment MC: 3.44 N·m \| Mounting Tap: M2.6 \| Full Stainless Type: available on request
VRT1045	THK Cross Roller Table VRT1045, stroke 25mm, 10 rollers, 42g	THK	Frame: VRT1 \| Table Width (W): 20 mm \| Height (M): 8 mm \| Stroke: 25 mm \| Rollers (Z): 10 \| Mass: 42 g \| Basic Dynamic Load Rating C: 0.95 kN \| Basic Static Load Rating C0: 1.53 kN \| Static Allowable Moment MA: 4.14 N·m \| Static Allowable Moment MB: 4.53 N·m \| Static Allowable Moment MC: 5.73 N·m \| Mounting Tap: M2.6 \| Full Stainless Type: available on request
VRT1055	THK Cross Roller Table VRT1055, stroke 32mm, 12 rollers, 52g	THK	Frame: VRT1 \| Table Width (W): 20 mm \| Height (M): 8 mm \| Stroke: 32 mm \| Rollers (Z): 12 \| Mass: 52 g \| Basic Dynamic Load Rating C: 1.09 kN \| Basic Static Load Rating C0: 1.83 kN \| Static Allowable Moment MA: 5.92 N·m \| Static Allowable Moment MB: 6.41 N·m \| Static Allowable Moment MC: 6.87 N·m \| Mounting Tap: M2.6 \| Full Stainless Type: available on request
VRT1065	THK Cross Roller Table VRT1065, stroke 40mm, 14 rollers, 62g	THK	Frame: VRT1 \| Table Width (W): 20 mm \| Height (M): 8 mm \| Stroke: 40 mm \| Rollers (Z): 14 \| Mass: 62 g \| Basic Dynamic Load Rating C: 1.23 kN \| Basic Static Load Rating C0: 2.14 kN \| Static Allowable Moment MA: 8.08 N·m \| Static Allowable Moment MB: 8.62 N·m \| Static Allowable Moment MC: 8.02 N·m \| Mounting Tap: M2.6 \| Full Stainless Type: available on request
VRT1075	THK Cross Roller Table VRT1075, stroke 45mm, 18 rollers, 72g	THK	Frame: VRT1 \| Table Width (W): 20 mm \| Height (M): 8 mm \| Stroke: 45 mm \| Rollers (Z): 18 \| Mass: 72 g \| Basic Dynamic Load Rating C: 1.5 kN \| Basic Static Load Rating C0: 2.75 kN \| Static Allowable Moment MA: 13.3 N·m \| Static Allowable Moment MB: 14.0 N·m \| Static Allowable Moment MC: 10.3 N·m \| Mounting Tap: M2.6 \| Full Stainless Type: available on request
VRT1085	THK Cross Roller Table VRT1085, stroke 50mm, 20 rollers, 82g	THK	Frame: VRT1 \| Table Width (W): 20 mm \| Height (M): 8 mm \| Stroke: 50 mm \| Rollers (Z): 20 \| Mass: 82 g \| Basic Dynamic Load Rating C: 1.63 kN \| Basic Static Load Rating C0: 3.05 kN \| Static Allowable Moment MA: 16.4 N·m \| Static Allowable Moment MB: 17.2 N·m \| Static Allowable Moment MC: 11.5 N·m \| Mounting Tap: M2.6 \| Full Stainless Type: available on request